summaryrefslogtreecommitdiff
path: root/drivers/scsi/smartpqi
AgeCommit message (Collapse)Author
2019-03-18scsi: smartpqi: add H3C controller IDsAjish Koshy
Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: David Carroll <david.carroll@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Ajish Koshy <ajish.koshy@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-18scsi: smartpqi: increase LUN reset timeoutKevin Barnett
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: David Carroll <david.carroll@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-16Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull more SCSI updates from James Bottomley: "This is the final round of mostly small fixes and performance improvements to our initial submit. The main regression fix is the ia64 simscsi build failure which was missed in the serial number elimination conversion" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits) scsi: ia64: simscsi: use request tag instead of serial_number scsi: aacraid: Fix performance issue on logical drives scsi: lpfc: Fix error codes in lpfc_sli4_pci_mem_setup() scsi: libiscsi: Hold back_lock when calling iscsi_complete_task scsi: hisi_sas: Change SERDES_CFG init value to increase reliability of HiLink scsi: hisi_sas: Send HARD RESET to clear the previous affiliation of STP target port scsi: hisi_sas: Set PHY linkrate when disconnected scsi: hisi_sas: print PHY RX errors count for later revision of v3 hw scsi: hisi_sas: Fix a timeout race of driver internal and SMP IO scsi: hisi_sas: Change return variable type in phy_up_v3_hw() scsi: qla2xxx: check for kstrtol() failure scsi: lpfc: fix 32-bit format string warning scsi: lpfc: fix unused variable warning scsi: target: tcmu: Switch to bitmap_zalloc() scsi: libiscsi: fall back to sendmsg for slab pages scsi: qla2xxx: avoid printf format warning scsi: lpfc: resolve static checker warning in lpfc_sli4_hba_unset scsi: lpfc: Correct __lpfc_sli_issue_iocb_s4 lockdep check scsi: ufs: hisi: fix ufs_hba_variant_ops passing scsi: qla2xxx: Fix panic in qla_dfs_tgt_counters_show ...
2019-03-09Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: arcmsr, qla2xxx, lpfc, hisi_sas, target/iscsi and target/core. Additionally Christoph refactored gdth as part of the dma changes. The major mid-layer change this time is the removal of bidi commands and with them the whole of the osd/exofs driver and filesystem. This is a major simplification for block and mq in particular" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (240 commits) scsi: cxgb4i: validate tcp sequence number only if chip version <= T5 scsi: cxgb4i: get pf number from lldi->pf scsi: core: replace GFP_ATOMIC with GFP_KERNEL in scsi_scan.c scsi: mpt3sas: Add missing breaks in switch statements scsi: aacraid: Fix missing break in switch statement scsi: kill command serial number scsi: csiostor: drop serial_number usage scsi: mvumi: use request tag instead of serial_number scsi: dpt_i2o: remove serial number usage scsi: st: osst: Remove negative constant left-shifts scsi: ufs-bsg: Allow reading descriptors scsi: ufs: Allow reading descriptor via raw upiu scsi: ufs-bsg: Change the calling convention for write descriptor scsi: ufs: Remove unused device quirks Revert "scsi: ufs: disable vccq if it's not needed by UFS device" scsi: megaraid_sas: Remove a bunch of set but not used variables scsi: clean obsolete return values of eh_timed_out scsi: sd: Optimal I/O size should be a multiple of physical block size scsi: MAINTAINERS: SCSI initiator and target tweaks scsi: fcoe: make use of fip_mode enum complete ...
2019-03-06scsi: smartpqi: Reporting 'logical unit failure'Erwan Velu
When the HARDWARE_ERROR/0x3e/0x1 case is triggered, the logical volume is offlined. When reading the kernel log, the reason why the device got offlined isn't reported to the user. This situation makes it difficult for admins to root cause. Log a message when this condition occurs. [mkp: tweaked commit message] Signed-off-by: Erwan Velu <e.velu@criteo.com> Acked-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-02-08scsi: ata: Use unsigned int for cmd's type in ioctls in scsi_host_templateNathan Chancellor
Clang warns several times in the scsi subsystem (trimmed for brevity): drivers/scsi/hpsa.c:6209:7: warning: overflow converting case value to switch condition type (2147762695 to 18446744071562347015) [-Wswitch] case CCISS_GETBUSTYPES: ^ drivers/scsi/hpsa.c:6208:7: warning: overflow converting case value to switch condition type (2147762694 to 18446744071562347014) [-Wswitch] case CCISS_GETHEARTBEAT: ^ The root cause is that the _IOC macro can generate really large numbers, which don't fit into type 'int', which is used for the cmd parameter in the ioctls in scsi_host_template. My research into how GCC and Clang are handling this at a low level didn't prove fruitful. However, looking at the rest of the kernel tree, all ioctls use an 'unsigned int' for the cmd parameter, which will fit all of the _IOC values in the scsi/ata subsystems. Make that change because none of the ioctls expect a negative value for any command, it brings the ioctls inline with the reset of the kernel, and it removes ambiguity, which is never good when dealing with compilers. Link: https://github.com/ClangBuiltLinux/linux/issues/85 Link: https://github.com/ClangBuiltLinux/linux/issues/154 Link: https://github.com/ClangBuiltLinux/linux/issues/157 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Bradley Grove <bgrove@attotech.com> Acked-by: Don Brace <don.brace@microsemi.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-29scsi: remove unneeded header search pathsMasahiro Yamada
I was able to build without these extra header search paths. Especially, the header search path -I. in kernel Makefiles is always suspicious; it allows the compiler to search for headers in the top of $(srctree), where obviously no header file exists. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-20Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "A set of 17 fixes. Most of these are minor or trivial. The one fix that may be serious is the isci one: the bug can cause hba parameters to be set from uninitialized memory. I don't think it's exploitable, but you never know" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: cxgb4i: add wait_for_completion() scsi: qla1280: set 64bit coherent mask scsi: ufs: Fix geometry descriptor size scsi: megaraid_sas: Retry reads of outbound_intr_status reg scsi: qedi: Add ep_state for login completion on un-reachable targets scsi: ufs: Fix system suspend status scsi: qla2xxx: Use correct number of vectors for online CPUs scsi: hisi_sas: Set protection parameters prior to adding SCSI host scsi: tcmu: avoid cmd/qfull timers updated whenever a new cmd comes scsi: isci: initialize shost fully before calling scsi_add_host() scsi: lpfc: lpfc_sli: Mark expected switch fall-throughs scsi: smartpqi_init: fix boolean expression in pqi_device_remove_start scsi: core: Synchronize request queue PM status only on successful resume scsi: pm80xx: reduce indentation scsi: qla4xxx: check return code of qla4xxx_copy_from_fwddb_param scsi: megaraid_sas: correct an info message scsi: target/iscsi: fix error msg typo when create lio_qr_cache failed scsi: sd: Fix cache_type_store()
2019-01-08scsi: smartpqi_init: fix boolean expression in pqi_device_remove_startGustavo A. R. Silva
Fix boolean expression by using logical AND operator '&&' instead of bitwise operator '&'. This issue was detected with the help of Coccinelle. Fixes: 1e46731efd9c ("scsi: smartpqi: check for null device pointers") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-08cross-tree: phase out dma_zalloc_coherent()Luis Chamberlain
We already need to zero out memory for dma_alloc_coherent(), as such using dma_zalloc_coherent() is superflous. Phase it out. This change was generated with the following Coccinelle SmPL patch: @ replace_dma_zalloc_coherent @ expression dev, size, data, handle, flags; @@ -dma_zalloc_coherent(dev, size, handle, flags) +dma_alloc_coherent(dev, size, handle, flags) Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> [hch: re-ran the script on the latest tree] Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-12-28Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: smarpqi, lpfc, qedi, megaraid_sas, libsas, zfcp, mpt3sas, hisi_sas. Additionally, we have a pile of annotation, unused variable and minor updates. The big API change is the updates for Christoph's DMA rework which include removing the DISABLE_CLUSTERING flag. And finally there are a couple of target tree updates" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (259 commits) scsi: isci: request: mark expected switch fall-through scsi: isci: remote_node_context: mark expected switch fall-throughs scsi: isci: remote_device: Mark expected switch fall-throughs scsi: isci: phy: Mark expected switch fall-through scsi: iscsi: Capture iscsi debug messages using tracepoints scsi: myrb: Mark expected switch fall-throughs scsi: megaraid: fix out-of-bound array accesses scsi: mpt3sas: mpt3sas_scsih: Mark expected switch fall-through scsi: fcoe: remove set but not used variable 'port' scsi: smartpqi: call pqi_free_interrupts() in pqi_shutdown() scsi: smartpqi: fix build warnings scsi: smartpqi: update driver version scsi: smartpqi: add ofa support scsi: smartpqi: increase fw status register read timeout scsi: smartpqi: bump driver version scsi: smartpqi: add smp_utils support scsi: smartpqi: correct lun reset issues scsi: smartpqi: correct volume status scsi: smartpqi: do not offline disks for transient did no connect conditions scsi: smartpqi: allow for larger raid maps ...
2018-12-20scsi: smartpqi: call pqi_free_interrupts() in pqi_shutdown()Yanjiang Jin
We must free all irqs during shutdown, else kexec's 2nd kernel would hang in pqi_wait_for_completion_io() as below: Call trace: pqi_wait_for_completion_io pqi_submit_raid_request_synchronous.constprop.78+0x23c/0x310 [smartpqi] pqi_configure_events+0xec/0x1f8 [smartpqi] pqi_ctrl_init+0x814/0xca0 [smartpqi] pqi_pci_probe+0x400/0x46c [smartpqi] local_pci_probe+0x48/0xb0 pci_device_probe+0x14c/0x1b0 really_probe+0x218/0x3fc driver_probe_device+0x70/0x140 __driver_attach+0x11c/0x134 bus_for_each_dev+0x70/0xc8 driver_attach+0x30/0x38 bus_add_driver+0x1f0/0x294 driver_register+0x74/0x12c __pci_register_driver+0x64/0x70 pqi_init+0xd0/0x10000 [smartpqi] do_one_initcall+0x60/0x1d8 do_init_module+0x64/0x1f8 load_module+0x10ec/0x1350 __se_sys_finit_module+0xd4/0x100 __arm64_sys_finit_module+0x28/0x34 el0_svc_handler+0x104/0x160 el0_svc+0x8/0xc This happens only in the following combinations: 1. smartpqi is built as module, not built-in; 2. We have a disk connected to smartpqi card; 3. Both kexec's 1st and 2nd kernels use this disk as Rootfs' mount point. Signed-off-by: Yanjiang Jin <yanjiang.jin@hxt-semitech.com> Acked-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-20scsi: smartpqi: fix build warningsDon Brace
Fix kbuild warning and fallout from linux-next -Wimplicit-fallthrough. [mkp: added fall through statements] Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19scsi: smartpqi: update driver versionDon Brace
- need to bump up the driver version because of the OFA patch and the fw status register read timeout patch. Reviewed-by: Gerry Morong <gerry.morong@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19scsi: smartpqi: add ofa supportMahesh Rajashekhara
- when OFA event occurs, driver will stop traffic to RAID/HBA path. Driver waits for all the outstanding requests to complete. - Driver sends OFA event acknowledgment to firmware. - Driver will wait until the new firmware is up and running. - Driver will free up the resources. - Driver calls SIS/PQI initialization and rescans the device list. - Driver will resume the traffic to RAID/HBA path. Reviewed-by: Murthy Bhat <murthy.bhat@microsemi.com> Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19scsi: smartpqi: increase fw status register read timeoutMahesh Rajashekhara
Problem: - during the driver initialization, driver will poll fw for KERNEL_UP in a 30 seconds timeout. - if the firmware is not ready after 30 seconds, driver will not be loaded. Fix: - change timeout from 30 seconds to 3 minutes. Reported-by: Feng Li <lifeng1519@gmail.com> Reviewed-by: Ajish Koshy <ajish.koshy@microsemi.com> Reviewed-by: Murthy Bhat <Murthy.Bhat@microsemi.com> Reviewed-by: Dave Carroll <david.carroll@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19scsi: smartpqi: bump driver versionDon Brace
Reviewed-by: Gerry Morong <gerry.morong@microsemi.com> Reviewed-by: Dave Carroll <david.carroll@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19scsi: smartpqi: add smp_utils supportDon Brace
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Dave Carroll <david.carroll@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19scsi: smartpqi: correct lun reset issuesKevin Barnett
Problem: The Linux kernel takes a logical volume offline after a LUN reset. This is generally accompanied by this message in the dmesg output: Device offlined - not ready after error recovery Root Cause: The root cause is a "quirk" in the timeout handling in the Linux SCSI layer. The Linux kernel places a 30-second timeout on most media access commands (reads and writes) that it send to device drivers. When a media access command times out, the Linux kernel goes into error recovery mode for the LUN that was the target of the command that timed out. Every command that timed out is kept on a list inside of the Linux kernel to be retried later. The kernel attempts to recover the command(s) that timed out by issuing a LUN reset followed by a TEST UNIT READY. If the LUN reset and TEST UNIT READY commands are successful, the kernel retries the command(s) that timed out. Each SCSI command issued by the kernel has a result field associated with it. This field indicates the final result of the command (success or error). When a command times out, the kernel places a value in this result field indicating that the command timed out. The "quirk" is that after the LUN reset and TEST UNIT READY commands are completed, the kernel checks each command on the timed-out command list before retrying it. If the result field is still "timed out", the kernel treats that command as not having been successfully recovered for a retry. If the number of commands that are in this state are greater than two, the kernel takes the LUN offline. Fix: When our RAIDStack receives a LUN reset, it simply waits until all outstanding commands complete. Generally, all of these outstanding commands complete successfully. Therefore, the fix in the smartpqi driver is to always set the command result field to indicate success when a request completes successfully. This normally isn’t necessary because the result field is always initialized to success when the command is submitted to the driver. So when the command completes successfully, the result field is left untouched. But in this case, the kernel changes the result field behind the driver’s back and then expects the field to be changed by the driver as the commands that timed-out complete. Reviewed-by: Dave Carroll <david.carroll@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19scsi: smartpqi: correct volume statusDave Carroll
- fix race condition when a unit is deleted after an RLL, and before we have gotten the LV_STATUS page of the unit. - In this case we will get a standard inquiry, rather than the desired page. This will result in a unit presented which no longer exists. - If we ask for LV_STATUS, insure we get LV_STATUS Reviewed-by: Murthy Bhat <murthy.bhat@microsemi.com> Reviewed-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Dave Carroll <david.carroll@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19scsi: smartpqi: do not offline disks for transient did no connect conditionsDave Carroll
Reviewed-by: Murthy Bhat <murthy.bhat@microsemi.com> Reviewed-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Dave Carroll <david.carroll@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19scsi: smartpqi: allow for larger raid mapsAjish Koshy
Reviewed-by: Murthy Bhat <murthy.bhat@microsemi.com> Reviewed-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com> Reviewed-by: Dave Carroll <david.carroll@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Ajish Koshy <ajish.koshy@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19scsi: smartpqi: check for null device pointersMahesh Rajashekhara
- wait on all outstanding I/O to complete before the device is removed. - check for null device pointers in IO entry/completion functions. Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Murthy Bhat <murthy.bhat@microsemi.com> Reviewed-by: Dave Carroll <david.carroll@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19scsi: smartpqi: add support for huawei controllersAjish Koshy
Reviewed-by: Murthy Bhat <murthy.bhat@microsemi.com> Reviewed-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com> Reviewed-by: Dave Carroll <david.carroll@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Ajish Koshy <ajish.koshy@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19scsi: smartpqi: enhance numa node detectionSagar Biradar
- set pci_dev->dev to 0 only if the node is NO_NUMA_NODE. If not, do not reset the value but retain it. Reviewed-by: Murthy Bhat <murthy.bhat@microsemi.com> Reviewed-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com> Reviewed-by: Dave Carroll <david.carroll@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Sagar Biradar <sagar.biradar@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19scsi: smartpqi: wake up drives after os resumes from suspendDave Carroll
- set allow_restart option during scsi_device init. This allows the kernel to send a START/STOP Unit command to the drive if it encounters a 4/2 check condition in sense data. Reviewed-by: Murthy Bhat <murthy.bhat@microsemi.com> Reviewed-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Dave Carroll <david.carroll@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19scsi: smartpqi: fix disk name mount pointMurthy Bhat
- fix a formatting issue. Reviewed-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Dave Carroll <david.carroll@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Murthy Bhat <murthy.bhat@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19scsi: smartpqi: add h3c ssidMurthy Bhat
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com> Reviewed-by: Dave Carroll <david.carroll@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Murthy Bhat <murthy.bhat@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19scsi: smartpqi: add sysfs attributesDave Carroll
- add sysfs device attributes, unique_id, lunid and path_info. Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Dave Carroll <david.carroll@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19scsi: smartpqi: refactor sending controller raid requestsDave Carroll
Clean up the common code which creates a raid path request for the controller LUNID and sends it synchronously, into a common routine; Reviewed-by: Murthy Bhat <murthy.bhat@microsemi.com> Reviewed-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Dave Carroll <david.carroll@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19scsi: smartpqi: turn off lun data caching for ptraidDave Carroll
- allow update the luns for PTRAID devices. Reviewed-by: Ajish Koshy <ajish.koshy@microsemi.com> Reviewed-by: Murthy Bhat <murthy.bhat@microsemi.com> Reviewed-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com> Reviewed-by: Justin Lindley <justin.lindley@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Dave Carroll <david.carroll@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19scsi: smartpqi: correct host serial num for ssaMahesh Rajashekhara
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Ajish Koshy <ajish.koshy@microsemi.com> Reviewed-by: Murthy Bhat <murthy.bhat@microsemi.com> Reviewed-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com> Reviewed-by: Dave Carroll <david.carroll@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19scsi: smartpqi: add no_write_same for logical volumesDave Carroll
During slave_alloc, for logical volumes include no_write_same into the scsi_device structure. This will insure that WRITE_SAME will not be used for LD's. Reviewed-by: Ajish Koshy <ajish.koshy@microsemi.com> Reviewed-by: Murthy Bhat <murthy.bhat@microsemi.com> Reviewed-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com> Reviewed-by: Justin Lindley <justin.lindley@microsemi.com> Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Dave Carroll <david.carroll@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19scsi: smartpqi: Add retries for device resetMahesh Rajashekhara
Reviewed-by: Ajish Koshy <ajish.koshy@microsemi.com> Reviewed-by: Murthy Bhat <murthy.bhat@microsemi.com> Reviewed-by: Justin Lindley <justin.lindley@microsemi.com> Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Dave Carroll <david.carroll@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19scsi: smartpqi: add support for PQI Config Table handshakeKevin Barnett
Add support for new IUs and parsing of the Firmware Features section of the PQI Config Table to implement the "handshake" between the driver and firmware to communicate firmware features supported and enabled by the driver. Reviewed-by: Ajish Koshy <ajish.koshy@microsemi.com> Reviewed-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com> Reviewed-by: Murthy Bhat <murthy.bhat@microsemi.com> Reviewed-by: Justin Lindley <justin.lindley@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-18scsi: flip the default on use_clusteringChristoph Hellwig
Most SCSI drivers want to enable "clustering", that is merging of segments so that they might span more than a single page. Remove the ENABLE_CLUSTERING define, and require drivers to explicitly set DISABLE_CLUSTERING to disable this feature. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-07blk-mq: abstract out queue mapJens Axboe
This is in preparation for allowing multiple sets of maps per queue, if so desired. Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-17scsi: smartpqi: fully convert to the generic DMA APIChristoph Hellwig
The driver is currently using an odd mix of legacy PCI DMA API and generic DMA API calls, switch it over to the generic API entirely. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Don Brace <don.brace@microchip.com> Acked-by: Don Brace <don.brace@microchip.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-19scsi: smartpqi: bump driver version to 1.1.4-130Don Brace
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-19scsi: smartpqi: fix critical ARM issue reading PQI index registersKevin Barnett
Use the readl() kernel function to read all index registers. For ARM systems, this function includes a read memory barrier that eliminates ci/pi corruption. Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Tested-by: Shunyong Yang <shunyong.yang@hxt-semitech.com> Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-19scsi: smartpqi: add inspur advantech idsKevin Barnett
Add support for these new device IDs: Advantech MIC-8312BridgeB INSPUR PM8204-2GB INSPUR PM8204-4GB INSPUR PM8222-SHBA Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-19scsi: smartpqi: improve error checking for sync requestsKevin Barnett
Detect rare error cases for synchronous requests down the RAID path. Also retry INQUIRY of VPD page 0 sent to an HBA drive if the command failed due to an abort. Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-19scsi: smartpqi: improve handling for sync requestsKevin Barnett
Decrement the active thread count after the synchronous request was submitted to the controller but before the driver blocks to wait for the request to complete. Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-04-05Merge tag 'scsi-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI updates from James Bottomley: "This is mostly updates of the usual drivers: arcmsr, qla2xx, lpfc, ufs, mpt3sas, hisi_sas. In addition we have removed several really old drivers: sym53c416, NCR53c406a, fdomain, fdomain_cs and removed the old scsi_module.c initialization from all remaining drivers. Plus an assortment of bug fixes, initialization errors and other minor fixes" * tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (168 commits) scsi: ufs: Add support for Auto-Hibernate Idle Timer scsi: ufs: sysfs: reworking of the rpm_lvl and spm_lvl entries scsi: qla2xxx: fx00 copypaste typo scsi: qla2xxx: fix error message on <qla2400 scsi: smartpqi: update driver version scsi: smartpqi: workaround fw bug for oq deletion scsi: arcmsr: Change driver version to v1.40.00.05-20180309 scsi: arcmsr: Sleep to avoid CPU stuck too long for waiting adapter ready scsi: arcmsr: Handle adapter removed due to thunderbolt cable disconnection. scsi: arcmsr: Rename ACB_F_BUS_HANG_ON to ACB_F_ADAPTER_REMOVED for adapter hot-plug scsi: qla2xxx: Update driver version to 10.00.00.06-k scsi: qla2xxx: Fix Async GPN_FT for FCP and FC-NVMe scan scsi: qla2xxx: Cleanup code to improve FC-NVMe error handling scsi: qla2xxx: Fix FC-NVMe IO abort during driver reset scsi: qla2xxx: Fix retry for PRLI RJT with reason of BUSY scsi: qla2xxx: Remove nvme_done_list scsi: qla2xxx: Return busy if rport going away scsi: qla2xxx: Fix n2n_ae flag to prevent dev_loss on PDB change scsi: qla2xxx: Add FC-NVMe abort processing scsi: qla2xxx: Add changes for devloss timeout in driver ...
2018-03-27blk-mq: Allow PCI vector offset for mapping queuesKeith Busch
The PCI interrupt vectors intended to be associated with a queue may not start at 0; a driver may allocate pre_vectors for special use. This patch adds an offset parameter so blk-mq may find the intended affinity mask and updates all drivers using this API accordingly. Cc: Don Brace <don.brace@microsemi.com> Cc: <qla2xxx-upstream@qlogic.com> Cc: <linux-scsi@vger.kernel.org> Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-21scsi: smartpqi: update driver versionDon Brace
Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Gerry Morong <gerry.morong@microsemi.com> Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-21scsi: smartpqi: workaround fw bug for oq deletionKevin Barnett
Skip deleting PQI operational queues when there is an error creating a new queue group. It's not really necessary to delete the queues anyway because they get deleted during the PQI reset that is part of the error recovery path. Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-06scsi: smartpqi: add in new supported controllersKevin Barnett
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 12:28:03 +0000