summaryrefslogtreecommitdiff
path: root/drivers/scsi/scsi_error.c
AgeCommit message (Collapse)Author
2014-11-10scsi: call device handler for failed TUR commandChristoph Hellwig
Multipath devices using the TUR path checker need to see the sense code for a failed TUR command in their device handler. Since commit 14216561e164671ce147458653b1fea06a we always return success for mid layer issued TUR commands before calling the device handler, which stopped the TUR path checker from working. Move the call to the device handler check sense method before the early return for TUR commands to give the device handler a chance to intercept them. Signed-off-by: Christoph Hellwig <hch@infradead.org> Tested-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-10scsi: only re-lock door after EH on devices that were resetChristoph Hellwig
Setups that use the blk-mq I/O path can lock up if a host with a single device that has its door locked enters EH. Make sure to only send the command to re-lock the door to devices that actually were reset and thus might have lost their state. Otherwise the EH code might be get blocked on blk_get_request as all requests for non-reset devices might be in use. Cc: stable@vger.kernel.org Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Meelis Roos <meelis.roos@ut.ee> Tested-by: Meelis Roos <meelis.roos@ut.ee> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
2014-10-18Merge branch 'for-3.18/core' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull core block layer changes from Jens Axboe: "This is the core block IO pull request for 3.18. Apart from the new and improved flush machinery for blk-mq, this is all mostly bug fixes and cleanups. - blk-mq timeout updates and fixes from Christoph. - Removal of REQ_END, also from Christoph. We pass it through the ->queue_rq() hook for blk-mq instead, freeing up one of the request bits. The space was overly tight on 32-bit, so Martin also killed REQ_KERNEL since it's no longer used. - blk integrity updates and fixes from Martin and Gu Zheng. - Update to the flush machinery for blk-mq from Ming Lei. Now we have a per hardware context flush request, which both cleans up the code should scale better for flush intensive workloads on blk-mq. - Improve the error printing, from Rob Elliott. - Backing device improvements and cleanups from Tejun. - Fixup of a misplaced rq_complete() tracepoint from Hannes. - Make blk_get_request() return error pointers, fixing up issues where we NULL deref when a device goes bad or missing. From Joe Lawrence. - Prep work for drastically reducing the memory consumption of dm devices from Junichi Nomura. This allows creating clone bio sets without preallocating a lot of memory. - Fix a blk-mq hang on certain combinations of queue depths and hardware queues from me. - Limit memory consumption for blk-mq devices for crash dump scenarios and drivers that use crazy high depths (certain SCSI shared tag setups). We now just use a single queue and limited depth for that" * 'for-3.18/core' of git://git.kernel.dk/linux-block: (58 commits) block: Remove REQ_KERNEL blk-mq: allocate cpumask on the home node bio-integrity: remove the needless fail handle of bip_slab creating block: include func name in __get_request prints block: make blk_update_request print prefix match ratelimited prefix blk-merge: don't compute bi_phys_segments from bi_vcnt for cloned bio block: fix alignment_offset math that assumes io_min is a power-of-2 blk-mq: Make bt_clear_tag() easier to read blk-mq: fix potential hang if rolling wakeup depth is too high block: add bioset_create_nobvec() block: use bio_clone_fast() in blk_rq_prep_clone() block: misplaced rq_complete tracepoint sd: Honor block layer integrity handling flags block: Replace strnicmp with strncasecmp block: Add T10 Protection Information functions block: Don't merge requests if integrity flags differ block: Integrity checksum flag block: Relocate bio integrity flags block: Add a disk flag to block integrity profile block: Add prefix to block integrity profile flags ...
2014-09-15scsi: fix various kernel-doc problems in scsi_error.cRandy Dunlap
Convert spaces to tabs in kernel-doc notation. Correct duplicated (copy-paste) kernel-doc comments that are incorrect. Fix kernel-doc warning: Warning(..//drivers/scsi/scsi_error.c:1647): No description found for parameter 'shost' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-08-28block,scsi: fixup blk_get_request dead queue scenariosJoe Lawrence
The blk_get_request function may fail in low-memory conditions or during device removal (even if __GFP_WAIT is set). To distinguish between these errors, modify the blk_get_request call stack to return the appropriate ERR_PTR. Verify that all callers check the return status and consider IS_ERR instead of a simple NULL pointer check. For consistency, make a similar change to the blk_mq_alloc_request leg of blk_get_request. It may fail if the queue is dead, or the caller was unwilling to wait. Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com> Acked-by: Jiri Kosina <jkosina@suse.cz> [for pktdvd] Acked-by: Boaz Harrosh <bharrosh@panasas.com> [for osd] Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-08-26block,scsi: verify return pointer from blk_get_requestJoe Lawrence
The blk-core dead queue checks introduce an error scenario to blk_get_request that returns NULL if the request queue has been shutdown. This affects the behavior for __GFP_WAIT callers, who should verify the return value before dereferencing. Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com> Acked-by: Jiri Kosina <jkosina@suse.cz> [for pktdvd] Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-07-25scsi: convert host_busy to atomic_tChristoph Hellwig
Avoid taking the host-wide host_lock to check the per-host queue limit. Instead we do an atomic_inc_return early on to grab our slot in the queue, and if necessary decrement it after finishing all checks. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Webb Scales <webbnh@hp.com> Acked-by: Jens Axboe <axboe@kernel.dk> Tested-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Robert Elliott <elliott@hp.com>
2014-07-17scsi: use dev_printk variants where possibleHannes Reinecke
Using dev_printk variants prefixes the logging message with the originating device, which makes debugging easier. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-17scsi: remove two cancel_delayed_work() calls from the mid-layerBart Van Assche
scsi_put_command() is either invoked before blk_start_request() or after block layer processing has completed. scsi_cmnd.abort_work is scheduled from inside the SCSI timeout handler. The block layer guarantees that either the regular completion handler (softirq_done_fn()) or the timeout handler (rq_timed_out_fn()) is invoked but not both. This means that scsi_put_command() is never invoked while abort_work is scheduled. Hence remove the cancel_delayed_work() call from scsi_put_command(). Similarly, scsi_abort_command() is only invoked from the SCSI timeout handler. If scsi_abort_command() is invoked for a SCSI command with the SCSI_EH_ABORT_SCHEDULED flag set this means that scmd_eh_abort_handler() has already invoked scsi_queue_insert() and hence that scsi_cmnd.abort_work is no longer pending. Hence also remove the cancel_delayed_work() call from scsi_abort_command(). Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-06-24scsi_error: set DID_TIME_OUT correctlyHannes Reinecke
Any callbacks in scsi_timeout_out() might return BLK_EH_RESET_TIMER, in which case we should leave the result alone and not set DID_TIME_OUT, as the command didn't actually timeout. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ewan D. Milne <emilne@redhat.com>
2014-06-24scsi_error: fix invalid setting of host byteUlrich Obergfell
After scsi_try_to_abort_cmd returns, the eh_abort_handler may have already found that the command has completed in the device, causing the host_byte to be nonzero (e.g. it could be DID_ABORT). When this happens, ORing DID_TIME_OUT into the host byte will corrupt the result field and initiate an unwanted command retry. Fix this by using set_host_byte instead, following the model of commit 2082ebc45af9c9c648383b8cde0dc1948eadbf31. Cc: stable@vger.kernel.org Signed-off-by: Ulrich Obergfell <uobergfe@redhat.com> [Fix all instances according to review comments. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-06-11Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block layer fixes from Jens Axboe: "Final small batch of fixes to be included before -rc1. Some general cleanups in here as well, but some of the blk-mq fixes we need for the NVMe conversion and/or scsi-mq. The pull request contains: - Support for not merging across a specified "chunk size", if set by the driver. Some NVMe devices perform poorly for IO that crosses such a chunk, so we need to support it generically as part of request merging avoid having to do complicated split logic. From me. - Bump max tag depth to 10Ki tags. Some scsi devices have a huge shared tag space. Before we failed with EINVAL if a too large tag depth was specified, now we truncate it and pass back the actual value. From me. - Various blk-mq rq init fixes from me and others. - A fix for enter on a dying queue for blk-mq from Keith. This is needed to prevent oopsing on hot device removal. - Fixup for blk-mq timer addition from Ming Lei. - Small round of performance fixes for mtip32xx from Sam Bradshaw. - Minor stack leak fix from Rickard Strandqvist. - Two __init annotations from Fabian Frederick" * 'for-linus' of git://git.kernel.dk/linux-block: block: add __init to blkcg_policy_register block: add __init to elv_register block: ensure that bio_add_page() always accepts a page for an empty bio blk-mq: add timer in blk_mq_start_request blk-mq: always initialize request->start_time block: blk-exec.c: Cleaning up local variable address returnd mtip32xx: minor performance enhancements blk-mq: ->timeout should be cleared in blk_mq_rq_ctx_init() blk-mq: don't allow queue entering for a dying queue blk-mq: bump max tag depth to 10K tags block: add blk_rq_set_block_pc() block: add notion of a chunk size for request merging
2014-06-06block: add blk_rq_set_block_pc()Jens Axboe
With the optimizations around not clearing the full request at alloc time, we are leaving some of the needed init for REQ_TYPE_BLOCK_PC up to the user allocating the request. Add a blk_rq_set_block_pc() that sets the command type to REQ_TYPE_BLOCK_PC, and properly initializes the members associated with this type of request. Update callers to use this function instead of manipulating rq->cmd_type directly. Includes fixes from Christoph Hellwig <hch@lst.de> for my half-assed attempt. Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-19scsi: set correct completion code in scsi_send_eh_cmnd()Hannes Reinecke
->queuecommand returns '0' for successful command submission, so we need to set the correct SCSI midlayer return value when calling scsi_log_completion(). Signed-off-by: Hannes Reinecke <hare@suse.de> Reported-by: Robert Elliott <elliott@hp.com> Cc: Stephen Cameron <scameron@beardog.cce.hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19scsi: handle command allocation failure in scsi_reset_providerChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Nicholas Bellinger <nab@linux-iscsi.org> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-04-21[SCSI] More USB deadlock fixesJames Bottomley
This patch fixes a corner case in the previous USB Deadlock fix patch (12023e7 [SCSI] Fix USB deadlock caused by SCSI error handling). The scenario is abort command, set flag, abort completes, send TUR, TUR doesn't return, so we now try to abort the TUR, but scsi_abort_eh_cmnd() will skip the abort because the flag is set and move straight to reset. Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-04-21[SCSI] Fix USB deadlock caused by SCSI error handlingHannes Reinecke
USB requires that every command be aborted first before we escalate to reset. In particular, USB will deadlock if we try to reset first before aborting the command. Unfortunately, the flag we use to tell if a command has already been aborted: SCSI_EH_ABORT_SCHEDULED is not cleared properly leading to cases where we can requeue a command with the flag set and proceed immediately to reset if it fails (thus causing USB to deadlock). Fix by clearing the SCSI_EH_ABORT_SCHEDULED flag if it has been set. Which means this will be the second time scsi_abort_command() has been called for the same command. IE the first abort went out, did its thing, but now the same command has timed out again. So this flag gets cleared, and scsi_abort_command() returns FAILED, and _no_ asynchronous abort is being scheduled. scsi_times_out() will then proceed to call scsi_eh_scmd_add(). But as we've cleared the SCSI_EH_ABORT_SCHEDULED flag the SCSI_EH_CANCEL_CMD flag will continue to be set, and the command will be aborted with the main SCSI EH routine. Reported-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Andreas Reis <andreas.reis@gmail.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-04-21[SCSI] Fix command result state propagationAlan Stern
We're seeing a case where the contents of scmd->result isn't being reset after a SCSI command encounters an error, is resubmitted, times out and then gets handled. The error handler acts on the stale result of the previous error instead of the timeout. Fix this by properly zeroing the scmd->status before the command is resubmitted. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-04-21[SCSI] Fix spurious request sense in error handlingJames Bottomley
We unconditionally execute scsi_eh_get_sense() to make sure all failed commands that should have sense attached, do. However, the routine forgets that some commands, because of the way they fail, will not have any sense code ... we should not bother them with a REQUEST_SENSE command. Fix this by testing to see if we actually got a CHECK_CONDITION return and skip asking for sense if we don't. Tested-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] do not manipulate device reference counts in scsi_get/put_commandChristoph Hellwig
Many callers won't need this and we can optimize them away. In addition the handling in the __-prefixed variants was inconsistant to start with. Based on an earlier patch from Bart Van Assche. [jejb: fix kerneldoc probelm picked up by Fengguang Wu] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-12-19[SCSI] Set the minimum valid value of 'eh_deadline' as 0Ren Mingxin
The former minimum valid value of 'eh_deadline' is 1s, which means the earliest occasion to shorten EH is 1 second later since a command is failed or timed out. But if we want to skip EH steps ASAP, we have to wait until the first EH step is finished. If the duration of the first EH step is long, this waiting time is excruciating. So, it is necessary to accept 0 as the minimum valid value for 'eh_deadline'. According to my test, with Hannes' patchset 'New EH command timeout handler' as well, the minimum IO time is improved from 73s (eh_deadline = 1) to 43s(eh_deadline = 0) when commands are timed out by disabling RSCN and target port. Signed-off-by: Ren Mingxin <renmx@cn.fujitsu.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-12-19[SCSI] Unlock accesses to eh_deadlineHannes Reinecke
32bit accesses are guaranteed to be atomic, so we can remove the spinlock when checking for eh_deadline. We only need to make sure to catch any updates which might happened during the call to time_before(); if so we just recheck with the correct value. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-12-19[SCSI] improved eh timeout handlerHannes Reinecke
When a command runs into a timeout we need to send an 'ABORT TASK' TMF. This is typically done by the 'eh_abort_handler' LLDD callback. Conceptually, however, this function is a normal SCSI command, so there is no need to enter the error handler. This patch implements a new scsi_abort_command() function which invokes an asynchronous function scsi_eh_abort_handler() to abort the commands via the usual 'eh_abort_handler'. If abort succeeds the command is either retried or terminated, depending on the number of allowed retries. However, 'eh_eflags' records the abort, so if the retry would fail again the command is pushed onto the error handler without trying to abort it (again); it'll be cleared up from SCSI EH. [hare: smatch detected stray switch fixed] Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-12-19[SCSI] Fix erratic device offline during EHJames Bottomley
Commit 18a4d0a22ed6c54b67af7718c305cd010f09ddf8 (Handle disk devices which can not process medium access commands) was introduced to offline any device which cannot process medium access commands. However, commit 3eef6257de48ff84a5d98ca533685df8a3beaeb8 (Reduce error recovery time by reducing use of TURs) reduced the number of TURs by sending it only on the first failing command, which might or might not be a medium access command. So in combination this results in an erratic device offlining during EH; if the command where the TUR was sent upon happens to be a medium access command the device will be set offline, if not everything proceeds as normal. This patch moves the check to the final test, eliminating this problem. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] scsi_error: Escalate to LUN reset if abort failsHannes Reinecke
If a command abort fails there is a fair chance that all other aborts will be failing, too. So we should be calling LUN reset directly after the first failed abort and skip aborting the remaining commands. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] Add 'eh_deadline' to limit SCSI EH runtimeHannes Reinecke
This patchs adds an 'eh_deadline' sysfs attribute to the scsi host which limits the overall runtime of the SCSI EH. The 'eh_deadline' value is stored in the now obsolete field 'resetting'. When a command is failed the start time of the EH is stored in 'last_reset'. If the overall runtime of the SCSI EH is longer than last_reset + eh_deadline, the EH is short-circuited and falls through to issue a host reset only. [jejb: add comments in Scsi_Host about new fields] Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-26[SCSI] Generate uevents on certain unit attention codesEwan D. Milne
Generate a uevent when the following Unit Attention ASC/ASCQ codes are received: 2A/01 MODE PARAMETERS CHANGED 2A/09 CAPACITY DATA HAS CHANGED 38/07 THIN PROVISIONING SOFT THRESHOLD REACHED 3F/03 INQUIRY DATA HAS CHANGED 3F/0E REPORTED LUNS DATA HAS CHANGED Log kernel messages when the following Unit Attention ASC/ASCQ codes are received that are not as specific as those above: 2A/xx PARAMETERS CHANGED 3F/xx TARGET OPERATING CONDITIONS HAVE CHANGED Added logic to set expecting_lun_change for other LUNs on the target after REPORTED LUNS DATA HAS CHANGED is received, so that duplicate uevents are not generated, and clear expecting_lun_change when a REPORT LUNS command completes, in accordance with the SPC-3 specification regarding reporting of the 3F 0E ASC/ASCQ UA. [jejb: remove SPC3 test in scsi_report_lun_change and some docbook fixes and unused variable fix, both reported by Fengguang Wu] Signed-off-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23[SCSI] Return ENODATA on medium errorHannes Reinecke
When a medium error is detected the SCSI stack should return ENODATA to the upper layers. [jejb: fix whitespace error] Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23[SCSI] return ENOSPC on thin provisioning failureHannes Reinecke
When the thin provisioning hard threshold is reached we should return ENOSPC to inform upper layers about this fact. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23[SCSI] Set hostbyte status in scsi_check_sense()Hannes Reinecke
We should be modifying the host_byte status in scsi_check_sense() directly; this saves us to introduce a special return code for each and every condition. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-07-04Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull first round of SCSI updates from James Bottomley: "The patch set is mostly driver updates (usf, zfcp, lpfc, mpt2sas, megaraid_sas, bfa, ipr) and a few bug fixes. Also of note is that the Buslogic driver has been rewritten to a better coding style and 64 bit support added. We also removed the libsas limitation on 16 bytes for the command size (currently no drivers make use of this)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (101 commits) [SCSI] megaraid: minor cut and paste error fixed. [SCSI] ufshcd-pltfrm: remove unnecessary dma_set_coherent_mask() call [SCSI] ufs: fix register address in UIC error interrupt handling [SCSI] ufshcd-pltfrm: add missing empty slot in ufs_of_match[] [SCSI] ufs: use devres functions for ufshcd [SCSI] ufs: Fix the response UPIU length setting [SCSI] ufs: rework link start-up process [SCSI] ufs: remove version check before IS reg clear [SCSI] ufs: amend interrupt configuration [SCSI] ufs: wrap the i/o access operations [SCSI] storvsc: Update the storage protocol to win8 level [SCSI] storvsc: Increase the value of scsi timeout for storvsc devices [SCSI] MAINTAINERS: Add myself as the maintainer for BusLogic SCSI driver [SCSI] BusLogic: Port driver to 64-bit. [SCSI] BusLogic: Fix style issues [SCSI] libiscsi: Added new boot entries in the session sysfs [SCSI] aacraid: Fix for arrays are going offline in the system. System hangs [SCSI] ipr: IOA Status Code(IOASC) update [SCSI] sd: Update WRITE SAME heuristics [SCSI] fnic: potential dead lock in fnic_is_abts_pending() ...
2013-06-04[SCSI] Allow error handling timeout to be specifiedMartin K. Petersen
Introduce eh_timeout which can be used for error handling purposes. This was previously hardcoded to 10 seconds in the SCSI error handling code. However, for some fast-fail scenarios it is necessary to be able to tune this as it can take several iterations (bus device, target, bus, controller) before we give up. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-28scsi: Spelling hsot -> hostGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-05-10[SCSI] Handle MLQUEUE busy response in scsi_send_eh_cmndHannes Reinecke
scsi_send_eh_cmnd() is calling queuecommand() directly, so it needs to check the return value here. The only valid return codes for queuecommand() are 'busy' states, so we need to wait for a bit to allow the LLDD to recover. Based on an earlier patch from Wen Xiong. [jejb: fix confusion between msec and jiffies values and other issues] [bvanassche: correct stall_for interval] Cc: Wen Xiong <wenxiong@linux.vnet.ibm.com> Cc: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-10-09[SCSI] Shorten the path length of scsi_cmd_to_driver()Li Zhong
This patch tries to shorten the path length of scsi_cmd_to_driver(). As only REQ_TYPE_BLOCK_PC commands can be submitted without a driver, so we could avoid the related NULL checking, as long as we make sure we don't use it for REQ_TYPE_BLOCK_PC type commands. Plus, this fixes a bug where you get different behaviors from REQ_TYPE_BLOCK_PC commands when a driver is and isn't attached. Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-08-22[SCSI] Fix 'Device not ready' issue on mpt2sasJames Bottomley
This is a particularly nasty SCSI ATA Translation Layer (SATL) problem. SAT-2 says (section 8.12.2) if the device is in the stopped state as the result of processing a START STOP UNIT command (see 9.11), then the SATL shall terminate the TEST UNIT READY command with CHECK CONDITION status with the sense key set to NOT READY and the additional sense code of LOGICAL UNIT NOT READY, INITIALIZING COMMAND REQUIRED; mpt2sas internal SATL seems to implement this. The result is very confusing standby behaviour (using hdparm -y). If you suspend a drive and then send another command, usually it wakes up. However, if the next command is a TEST UNIT READY, the SATL sees that the drive is suspended and proceeds to follow the SATL rules for this, returning NOT READY to all subsequent commands. This means that the ordering of TEST UNIT READY is crucial: if you send TUR and then a command, you get a NOT READY to both back. If you send a command and then a TUR, you get GOOD status because the preceeding command woke the drive. This bit us badly because commit 85ef06d1d252f6a2e73b678591ab71caad4667bb Author: Tejun Heo <tj@kernel.org> Date: Fri Jul 1 16:17:47 2011 +0200 block: flush MEDIA_CHANGE from drivers on close(2) Changed our ordering on TEST UNIT READY commands meaning that SATA drives connected to an mpt2sas now suspend and refuse to wake (because the mpt2sas SATL sees the suspend *before* the drives get awoken by the next ATA command) resulting in lots of failed commands. The standard is completely nuts forcing this inconsistent behaviour, but we have to work around it. The fix for this is twofold: 1. Set the allow_restart flag so we wake the drive when we see it has been suspended 2. Return all TEST UNIT READY status directly to the mid layer without any further error handling which prevents us causing error handling which may offline the device just because of a media check TUR. Reported-by: Matthias Prager <linux@matthiasprager.de> Cc: stable@vger.kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] cleanup setting task state in scsi_error_handler()Dan Williams
A quick reading of scsi_error_handler() one could come away with the impression that it does its wakeup event check while the task state is TASK_RUNNING. In fact it sets TASK_INTERRUPTIBLE at the bottom of the loop, but that is ~50 lines down. Just set TASK_INTERRUPTIBLE at the top of loop and be done. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] fix eh wakeup (scsi_schedule_eh vs scsi_restart_operations)Dan Williams
Rapid ata hotplug on a libsas controller results in cases where libsas is waiting indefinitely on eh to perform an ata probe. A race exists between scsi_schedule_eh() and scsi_restart_operations() in the case when scsi_restart_operations() issues i/o to other devices in the sas domain. When this happens the host state transitions from SHOST_RECOVERY (set by scsi_schedule_eh) back to SHOST_RUNNING and ->host_busy is non-zero so we put the eh thread to sleep even though ->host_eh_scheduled is active. Before putting the error handler to sleep we need to check if the host_state needs to return to SHOST_RECOVERY for another trip through eh. Since i/o that is released by scsi_restart_operations has been blocked for at least one eh cycle, this implementation allows those i/o's to run before another eh cycle starts to discourage hung task timeouts. Cc: <stable@vger.kernel.org> Reported-by: Tom Jackson <thomas.p.jackson@intel.com> Tested-by: Tom Jackson <thomas.p.jackson@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial updates from Jiri Kosina: "As usual, it's mostly typo fixes, redundant code elimination and some documentation updates." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (57 commits) edac, mips: don't change code that has been removed in edac/mips tree xtensa: Change mail addresses of Hannes Weiner and Oskar Schirmer lib: Change mail address of Oskar Schirmer net: Change mail address of Oskar Schirmer arm/m68k: Change mail address of Sebastian Hess i2c: Change mail address of Oskar Schirmer net: Fix tcp_build_and_update_options comment in struct tcp_sock atomic64_32.h: fix parameter naming mismatch Kconfig: replace "--- help ---" with "---help---" c2port: fix bogus Kconfig "default no" edac: Fix spelling errors. qla1280: Remove redundant NULL check before release_firmware() call remoteproc: remove redundant NULL check before release_firmware() qla2xxx: Remove redundant NULL check before release_firmware() call. aic94xx: Get rid of redundant NULL check before release_firmware() call tehuti: delete redundant NULL check before release_firmware() qlogic: get rid of a redundant test for NULL before call to release_firmware() bna: remove redundant NULL test before release_firmware() tg3: remove redundant NULL test before release_firmware() call typhoon: get rid of redundant conditional before all to release_firmware() ...
2012-04-16scsi: fix comment spelling fix recory->recoverySantosh Y
Signed-off-by: Santosh Y <santoshsy@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-04-15SCSI: Fix error handling when no ULD is attachedMartin K. Petersen
Commit 18a4d0a22ed6 ("[SCSI] Handle disk devices which can not process medium access commands") introduced a bug in which we would attempt to dereference the scsi driver even when the device had no ULD attached. Ensure that a driver is registered and make the driver accessor function more resilient to errors during device discovery. Reported-by: Elric Fu <elricfu1@gmail.com> Reported-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-02-19[SCSI] Handle disk devices which can not process medium access commandsMartin K. Petersen
We have experienced several devices which fail in a fashion we do not currently handle gracefully in SCSI. After a failure these devices will respond to the SCSI primary command set (INQUIRY, TEST UNIT READY, etc.) but any command accessing the storage medium will time out. The following patch adds an callback that can be used by upper level drivers to inspect the results of an error handling command. This in turn has been used to implement additional checking in the SCSI disk driver. If a medium access command fails twice but TEST UNIT READY succeeds both times in the subsequent error handling we will offline the device. The maximum number of failed commands required to take a device offline can be tweaked in sysfs. Also add a new error flag to scsi_debug which allows this scenario to be easily reproduced. [jejb: fix up integer parsing to use kstrtouint] Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] scsi_error: classify some ILLEGAL_REQUEST sense as a permanent ↵Mike Snitzer
TARGET_ERROR Permanent target failures are non-retryable and should be classified as TARGET_ERROR; otherwise dm-multipath will retry an IO request that will always fail at the target. A SCSI command that fails with ILLEGAL_REQUEST sense and Additional sense 0x20, 0x21, 0x24 or 0x26 represents a permanent TARGET_ERROR. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] fix the new host byte settings (DID_TARGET_FAILURE and DID_NEXUS_FAILURE)Moger, Babu
This patch fixes the host byte settings DID_TARGET_FAILURE and DID_NEXUS_FAILURE. The function __scsi_error_from_host_byte, tries to reset the host byte to DID_OK. But that does not happen because of the OR operation. Here is the flow. scsi_softirq_done-> scsi_decide_disposition -> __scsi_error_from_host_byte Let's take an example with DID_NEXUS_FAILURE. In scsi_decide_disposition, result will be set as DID_NEXUS_FAILURE (=0x11). Then in __scsi_error_from_host_byte, when we do OR with DID_OK. Purpose is to reset it back to DID_OK. But that does not happen. This patch fixes this issue. Signed-off-by: Babu Moger <babu.moger@netapp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-08[SCSI] add flag to skip the runtime PM calls on the hostLin Ming
With previous change, now the ata port runtime suspend will happen as: disk suspend --> scsi target suspend --> scsi host suspend --> ata port suspend ata port(parent device) suspend need to schedule scsi EH which will resume scsi host(child device). Then the child device resume will in turn make parent device resume first. This is kind of recursive. This patch adds a new flag Scsi_Host::eh_noresume. ata port will set this flag to skip the runtime PM calls on scsi host. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-08-27[SCSI] Fix out of spec CD-ROM problem with media changeTARUISI Hiroaki
Some CD-ROMs fail to report a media change correctly. The specific one for this patch simply fails to respond to commands, then gives a UNIT ATTENTION after being reset which returns ASC/ASCQ 28/00. This is out of spec behaviour, but add a check in the eat CC/UA on reset path to catch this case so the CD-ROM will function somewhat properly. [jejb: fixed up white space and accepted without signoff] Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-05-24[SCSI] Reduce error recovery time by reducing use of TURsDavid Jeffery
In error recovery, most scsi error recovery stages will send a TUR command for every bad command when a driver's error handler reports success. When several bad commands to the same device, this results in a device being probed multiple times. This becomes very problematic if the device or connection is in a state where the device still doesn't respond to commands even after a recovery function returns success. The error handler must wait for the test commands to time out. The time waiting for the redundant commands can drastically lengthen error recovery. This patch alters the scsi mid-layer's error routines to send test commands once per device instead of once per bad command. This can drastically lower error recovery time. [jejb: fixed up whitespace and formatting] Signed-of-by: David Jeffery <djeffery@redhat.com> Signed-off-by: James Bottomley <jbottomley@parallels.com>
2011-04-15[SCSI] Log thin provisioning threshold eventShyam Iyer
At least log the message that we received a THIN PROVISIONING SOFT THRESHOLD REACHED Unit Attention. Also added it to unit attention decodes. Signed-off-by: Shyam Iyer <shyam_iyer@dell.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-21Reduce sequential pointer derefs in scsi_error.c and reduce size as wellJesper Juhl
This patch reduces the number of sequential pointer derefs in drivers/scsi/scsi_error.c This has been submitted a number of times over a couple of years. I believe this version adresses all comments it has gathered over time. Please apply or reject with a reason. The benefits are: - makes the code easier to read. Lots of sequential derefs of the same pointers is not easy on the eye. - theoretically at least, just dereferencing the pointers once can allow the compiler to generally slightly faster code, so in theory this could also be a micro speed optimization. - reduces size of object file (tiny effect: on x86-64, in at least one configuration, the text size decreased from 9439 bytes to 9400) - removes some pointless (mostly trailing) whitespace. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-12[SCSI] Add detailed SCSI I/O errorsHannes Reinecke
Instead of just passing 'EIO' for any I/O error we should be notifying the upper layers with more details about the cause of this error. Update the possible I/O errors to: - ENOLINK: Link failure between host and target - EIO: Retryable I/O error - EREMOTEIO: Non-retryable I/O error - EBADE: I/O error restricted to the I_T_L nexus 'Retryable' in this context means that an I/O error _might_ be restricted to the I_T_L nexus (vulgo: path), so retrying on another nexus / path might succeed. 'Non-retryable' in general refers to a target failure, so this error will always be generated regardless of the I_T_L nexus it was send on. I/O errors restricted to the I_T_L nexus might be retried on another nexus / path, but they should _not_ be queued if no paths are available. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>