summaryrefslogtreecommitdiff
path: root/drivers/scsi/scsi_debug.c
AgeCommit message (Collapse)Author
2016-05-10scsi_debug: use locally assigned naaDouglas Gilbert
For reported SAS addresses replace fake IEEE registered NAAs (5) with locally assigned NAAs (3). Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-05-10scsi_debug: uuid for lu nameDouglas Gilbert
Permit changing of a LU name from a (fake) IEEE registered NAA (5) to a locally assigned UUID. Using a UUID (RFC 4122) for a SCSI designation descriptor (e.g. a LU name) was added in spc5r08.pdf (a draft INCITS standard) on 25 January 2016. Add parameter uuid_ctl to use a separate UUID for each LU (storage device) name. Additional option for all LU names to have the same UUID (since their storage is shared). Previous action of using NAA identifier for LU name remains the default. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-05-10scsi_debug: vpd and mode page workDouglas Gilbert
Cleanup some mode and vpd pages. Stop reporting SBC (disk) pages when peripheral type is something else (e.g. tape). Update version descriptors. Expand LBPRZ flag handling. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-05-10scsi_debug: add multiple queue supportDouglas Gilbert
Add submit_queue parameter (minimum and default: 1; maximum: nr_cpu_ids) that controls how many queues are built, each with their own lock and in_use bit vector. Add statistics parameter which is default off. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-05-03scsi_debug: rework resp_report_lunsDouglas Gilbert
Based on "[PATH V2] scsi_debug: rework resp_report_luns" patch sent by Tomas Winkler on Thursday, 26 Feb 2015. His notes: 1. Remove duplicated boundary checks which simplify the fill-in loop 2. Use more of scsi generic API Replace fixed length response array a with heap allocation allowing up to 256 normal LUNs per target. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Reviewed-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-05-03scsi_debug: use pdt constantsDouglas Gilbert
Use TYPE_* constants for SCSI peripheral device types instead of numbers. Further cleanups requested by checkpatch.pl. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-29scsi_debug: use likely hints on fast pathDouglas Gilbert
The most common commands in normal use are the READ and WRITE SCSI commands. Use likely and unlikely hints along the path taken by these commands. Rename check_readiness() to make_ua() and remove associated dead code. Rename devInfoReg() to find_build_dev_info(). Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-29scsi_debug: re-order file scope declarationsDouglas Gilbert
Group most defines together first; followed by struct definitions and then table and variable definitions. Normalize all function headers. [mkp: Corrected hex value in WP/DPOFUA MODE SENSE comment] Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-29scsi_debug: replace tasklet with work queueDouglas Gilbert
When a negative value was placed in the delay parameter, a tasklet was scheduled. Change the tasklet to a work queue. Previously a delay of -1 scheduled a high priority tasklet; since there are no high priority work queues, treat -1 like other negative values in delay and schedule a work item. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-29scsi_debug: make jiffy delay name clearerDouglas Gilbert
Add 'j' to delay names to make it clearer that its unit is jiffies and to differentiate it from sdebug_ndelay whose unit is nanoseconds. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-29scsi_debug: replace jiffy timers with hr timersDouglas Gilbert
The driver supports two command delay interfaces, the original one whose unit is a jiffy, and a newer one whose unit is a nanosecond. Each had different implementations. Keep both interfaces but simplify the implemenation to use a single delay mechanism based on high resolution timers. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-29scsi_debug: ignore host lock optionDouglas Gilbert
Remove logic to optionally hold host_lock while each command is queued. Keep module and sysfs host_lock parameters for backward compatibility. Note in module parameter description that host_lock is ignored. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-29scsi_debug: cleanup naming and bit crunchingDouglas Gilbert
Shorten file scope static and constant names. Use more get/put_unaligned calls to hide bit banging. Introduce sdebug_verbose boolean to replace frequent masking of option bit flags. Add GPL and bump version. [mkp: Use logical instead of bitwise OR for LBP VPD flags] Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-15scsi: rename SCSI_MAX_{SG, SG_CHAIN}_SEGMENTSMing Lin
Rename SCSI_MAX_SG_SEGMENTS to SG_CHUNK_SIZE, which means the amount we fit into a single scatterlist chunk. Rename SCSI_MAX_SG_CHAIN_SEGMENTS to SG_MAX_SEGMENTS. Will move these 2 generic definitions to scatterlist.h later. Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Bart Van Assche <bart.vanassche@sandisk.com> (for ib_srp changes) Signed-off-by: Ming Lin <ming.l@ssi.samsung.com> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-01-07Merge branch 'jejb-scsi' into miscJames Bottomley
2015-12-21scsi_debug: Increase the reported optimal transfer lengthMartin K. Petersen
The OPTIMAL TRANSFER LENGTH reported by scsi_debug is 64 blocks which translates to 32KB with the default logical block size. That's much lower than what real storage devices typically report (256KB to 1MB). Bump the optimal transfer length to 1024 blocks. Acked-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Ewan Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-30scsi_debug: check for bigger value firstAndy Shevchenko
Even for signed types we have to check for bigger positive value first. Otherwise it will be never happened. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Ewan Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-25scsi: use sector_div instead of do_divArnd Bergmann
do_div is the wrong way to divide a sector_t, as it is less efficient when sector_t is 32-bit wide. With the upcoming do_div optimizations, the kernel starts warning about this: drivers/scsi/scsi_debug.c: In function 'dif_store': include/asm-generic/div64.h:207:28: warning: comparison of distinct pointer types lacks a cast This changes the code to use sector_div instead, which always produces optimal code. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Hannes Reinicke <hare@suse.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-25scsi_debug: fix prevent_allow+verify regressionsDouglas Gilbert
Ruediger Meier observed a regression with the PREVENT ALLOW MEDIUM REMOVAL command in lk 3.19: http://www.spinics.net/lists/util-linux-ng/msg11448.html Inspection indicated the same regression with VERIFY(10). The patch is against lk 3.19.3 and also works with lk 4.3.0 . With this patch both commands are accepted and do nothing. ChangeLog: - fix the lk 3.19 regression so that the PREVENT ALLOW MEDIUM REMOVAL command is supported once again - same fix for VERIFY(10) Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Reviewed-by: Ewan Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-09-06scsi_debug: resp_request: remove unused variableTomas Winkler
Fixes the following warning In function ‘resp_requests’: drivers/scsi//scsi_debug.c:1432:15: warning: variable ‘want_dsense’ set but not used [-Wunused-but-set-variable] bool dsense, want_dsense; Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-09-06scsi_debug: fix REPORT LUNS Well Known LUTomas Winkler
The use case to report 'REPORT LUNS WLUN' described in scsi_debug documentation didn't work because: scsi_scan_host_selected() checks for: lun < shost->max_lun To fix this we set: max_lun = SCSI_W_LUN_REPORT_LUNS + 1; Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-09-06scsi_debug: schedule_resp fix input variable checkTomas Winkler
The function should never be called with cmnd NULL so put a fat WARN there. Fix also smatch wraning: schedule_resp() warn: variable dereferenced before check 'cmnd' Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-09-06scsi_debug: make dump_sector staticTomas Winkler
fixes warning: warning: no previous prototype for ‘dump_sector’ Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-09-06scsi_debug: vfree is null safe so drop the checkTomas Winkler
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-09-06scsi_debug: use SCSI_W_LUN_REPORT_LUNS instead of SAM2_WLUN_REPORT_LUNS;Tomas Winkler
use SCSI_W_LUN_REPORT_LUNS from scsi.h instead of localy defined SAM2_WLUN_REPORT_LUNS Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-09-06scsi_debug: define pr_fmt() for consistent loggingTomas Winkler
Use pr_fmt with both module name and __func__ Also drop few bare printk leftovers The log format should stay pretty much intact Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-06-30drivers/scsi/scsi_debug.c: resolve sg buffer const-ness issueDave Gordon
do_device_access() takes a separate parameter to indicate the direction of data transfer, which it used to use to select the appropriate function out of sg_pcopy_{to,from}_buffer(). However these two functions now have So this patch makes it bypass these wrappers and call the underlying function sg_copy_buffer() directly; this has the same calling style as do_device_access() i.e. a separate direction-of-transfer parameter and no pointers-to-const, so skipping the wrappers not only eliminates the warning, it also make the code simpler :) [akpm@linux-foundation.org: fix very broken build] Signed-off-by: Dave Gordon <david.s.gordon@intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-13scsi: use %*pb[l] to print bitmaps including cpumasks and nodemasksTejun Heo
printk and friends can now format bitmaps using '%*pb[l]'. cpumask and nodemask also provide cpumask_pr_args() and nodemask_pr_args() respectively which can be used to generate the two printf arguments necessary to format the specified cpu/nodemask. * map_show()'s return value is too high by one and the function could modify beyond the end of the buffer when the formatted text is long enough. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-11Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull first round of SCSI updates from James Bottomley: "This is the usual grab bag of driver updates (hpsa, storvsc, mp2sas, megaraid_sas, ses) plus an assortment of minor updates. There's also an update to ufs which adds new phy drivers and finally a new logging infrastructure for SCSI" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (114 commits) scsi_logging: return void for dev_printk() functions scsi: print single-character strings with seq_putc scsi: merge consecutive seq_puts calls scsi: replace seq_printf with seq_puts aha152x: replace seq_printf with seq_puts advansys: replace seq_printf with seq_puts scsi: remove SPRINTF macro sg: remove an unused variable hpsa: Use local workqueues instead of system workqueues hpsa: add in P840ar controller model name hpsa: add in gen9 controller model names hpsa: detect and report failures changing controller transport modes hpsa: shorten the wait for the CISS doorbell mode change ack hpsa: refactor duplicated scan completion code into a new routine hpsa: move SG descriptor set-up out of hpsa_scatter_gather() hpsa: do not use function pointers in fast path command submission hpsa: print CDBs instead of kernel virtual addresses for uncommon errors hpsa: do not use a void pointer for scsi_cmd field of struct CommandList hpsa: return failed from device reset/abort handlers hpsa: check for ctlr lockup after command allocation in main io path ...
2015-01-22scsi_debug: test always evaluates to false, || should be used insteadColin Ian King
cppcheck found the following issue: (warning) Logical conjunction always evaluates to false: alloc_len < 4 && alloc_len > 65535. ..the test should be instead: if (alloc_len < 4 || alloc_len > 65536) This error was introduced by recent commit 38d5c8336e60bf6e53a1da9 ("scsi_debug: add Report supported opcodes+tmfs; Compare and write") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-01-20scsi_debug: use atomic allocation in resp_rsup_opcodesSasha Levin
resp_rsup_opcodes() may get called from atomic context and would need to use GFP_ATOMIC for allocations: [ 1237.913419] BUG: sleeping function called from invalid context at mm/slub.c:1262 [ 1237.914865] in_atomic(): 1, irqs_disabled(): 0, pid: 7556, name: trinity-c311 [ 1237.916142] 3 locks held by trinity-c311/7556: [ 1237.916981] #0: (sb_writers#5){.+.+.+}, at: do_readv_writev (include/linux/fs.h:2346 fs/read_write.c:844) [ 1237.919713] #1: (&of->mutex){+.+.+.}, at: kernfs_fop_write (fs/kernfs/file.c:297) [ 1237.922626] Mutex: counter: -1 owner: trinity-c311 [ 1237.924044] #2: (s_active#51){.+.+.+}, at: kernfs_fop_write (fs/kernfs/file.c:297) [ 1237.925960] Preemption disabled blk_execute_rq_nowait (block/blk-exec.c:95) [ 1237.927416] [ 1237.927680] CPU: 24 PID: 7556 Comm: trinity-c311 Not tainted 3.19.0-rc4-next-20150116-sasha-00054-g4ad498c-dirty #1744 [ 1237.929603] ffff8804fc9d8000 ffff8804d9bc3548 ffffffff9d439fb2 0000000000000000 [ 1237.931097] 0000000000000000 ffff8804d9bc3588 ffffffff9a18389a ffff8804d9bc3598 [ 1237.932466] ffffffff9a1b1715 ffffffffa15935d8 ffffffff9e6f8cb1 00000000000004ee [ 1237.933984] Call Trace: [ 1237.934434] dump_stack (lib/dump_stack.c:52) [ 1237.935323] ___might_sleep (kernel/sched/core.c:7339) [ 1237.936259] ? mark_held_locks (kernel/locking/lockdep.c:2549) [ 1237.937293] __might_sleep (kernel/sched/core.c:7305) [ 1237.938272] __kmalloc (mm/slub.c:1262 mm/slub.c:2419 mm/slub.c:2491 mm/slub.c:3291) [ 1237.939137] ? resp_rsup_opcodes (include/linux/slab.h:435 drivers/scsi/scsi_debug.c:1689) [ 1237.940173] resp_rsup_opcodes (include/linux/slab.h:435 drivers/scsi/scsi_debug.c:1689) [ 1237.941211] ? add_host_store (drivers/scsi/scsi_debug.c:1584) [ 1237.942261] scsi_debug_queuecommand (drivers/scsi/scsi_debug.c:5276) [ 1237.943404] ? blk_rq_map_sg (block/blk-merge.c:254) [ 1237.944398] ? scsi_init_sgtable (drivers/scsi/scsi_lib.c:1095) [ 1237.945402] sdebug_queuecommand_lock_or_not (drivers/scsi/scsi_debug.c:5300) [ 1237.946735] scsi_dispatch_cmd (drivers/scsi/scsi_lib.c:1706) [ 1237.947720] scsi_queue_rq (drivers/scsi/scsi_lib.c:1996) [ 1237.948687] __blk_mq_run_hw_queue (block/blk-mq.c:816) [ 1237.949796] blk_mq_run_hw_queue (block/blk-mq.c:896) [ 1237.950903] ? _raw_spin_unlock (./arch/x86/include/asm/preempt.h:95 include/linux/spinlock_api_smp.h:154 kernel/locking/spinlock.c:183) [ 1237.951862] blk_mq_insert_request (block/blk-mq.c:1037) [ 1237.952876] blk_execute_rq_nowait (block/blk-exec.c:95) [ 1237.953981] ? lockdep_init_map (kernel/locking/lockdep.c:3034) [ 1237.954967] blk_execute_rq (block/blk-exec.c:131) [ 1237.955929] ? blk_rq_bio_prep (block/blk-core.c:2835) [ 1237.956913] scsi_execute (drivers/scsi/scsi_lib.c:252) [ 1237.957821] scsi_execute_req_flags (drivers/scsi/scsi_lib.c:281) [ 1237.958968] scsi_report_opcode (drivers/scsi/scsi.c:956) [ 1237.960009] sd_revalidate_disk (drivers/scsi/sd.c:2707 drivers/scsi/sd.c:2792) [ 1237.961139] revalidate_disk (fs/block_dev.c:1081) [ 1237.962223] sd_rescan (drivers/scsi/sd.c:1532) [ 1237.963142] scsi_rescan_device (drivers/scsi/scsi_scan.c:1579) [ 1237.964165] store_rescan_field (drivers/scsi/scsi_sysfs.c:672) [ 1237.965254] dev_attr_store (drivers/base/core.c:138) [ 1237.966319] sysfs_kf_write (fs/sysfs/file.c:131) [ 1237.967289] kernfs_fop_write (fs/kernfs/file.c:311) [ 1237.968274] do_readv_writev (fs/read_write.c:722 fs/read_write.c:854) [ 1237.969295] ? __acct_update_integrals (kernel/tsacct.c:145) [ 1237.970452] ? kernfs_fop_open (fs/kernfs/file.c:271) [ 1237.971505] ? _raw_spin_unlock (./arch/x86/include/asm/preempt.h:95 include/linux/spinlock_api_smp.h:154 kernel/locking/spinlock.c:183) [ 1237.972512] ? context_tracking_user_exit (include/linux/vtime.h:89 include/linux/jump_label.h:114 include/trace/events/context_tracking.h:47 kernel/context_tracking.c:140) [ 1237.973668] ? trace_hardirqs_on_caller (kernel/locking/lockdep.c:2578 kernel/locking/lockdep.c:2625) [ 1237.974882] ? trace_hardirqs_on (kernel/locking/lockdep.c:2633) [ 1237.975850] vfs_writev (fs/read_write.c:893) [ 1237.976691] SyS_writev (fs/read_write.c:926 fs/read_write.c:917) [ 1237.977538] system_call_fastpath (arch/x86/kernel/entry_64.S:423) Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-01-09scsi_debug: Implement WRITE BUFFER commandEwan D. Milne
Accept the WRITE BUFFER command and do nothing other than set the appropriate "microcode has been changed" UA on the LU. >From an earlier patch by Doug Gilbert. Signed-off-by: Ewan D. Milne <emilne@redhat.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Tested-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-01-09scsi_debug: Add REPORTED LUNS DATA HAS CHANGED Unit AttentionEwan D. Milne
Generate a REPORTED LUNS DATA HAS CHANGED Unit Attention if sysfs "max_luns" is used to change the number of scsi_debug LUNs. This is only done if scsi_debug_scsi_level is SPC-3 or above. Additionally, implement SPC-4 behavior which only generates this Unit Attention on the first LUN on the target to receive a command after the change. This condition is cleared when a REPORT LUNS command is received. Signed-off-by: Ewan D. Milne <emilne@redhat.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Tested-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-12-15scsi_debug: fix missing "break;" in SDEBUG_UA_CAPACITY_CHANGED caseEwan D. Milne
This eliminates a superfluous log message when the capacity is changed: "check_readiness: unexpected unit attention code=3" Signed-off-by: Ewan D. Milne <emilne@redhat.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-12-15scsi_debug: take sdebug_host_list_lock when changing capacityEwan D. Milne
All other traversals of the sdebug_host_list take the lock. Signed-off-by: Ewan D. Milne <emilne@redhat.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-12-15scsi_debug: fix compare and write errorsDouglas Gilbert
Kernel build tools pointed out a memory leak so that has been fixed and its error paths strengthened with a goto. Testing showed compare and write was only working for lba=0; correcting the length of the LBA field fixed that. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-12-04scsi: remove MSG_*_TAG definesChristoph Hellwig
For SPI drivers use the message definitions from scsi.h, and for target drivers introduce a new TCM_*_TAG namespace. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com
2014-12-04scsi: remove ->change_queue_type methodChristoph Hellwig
Since we got rid of ordered tag support in 2010 the prime use case of switching on and off ordered tags has been obsolete. The other function of enabling/disabling tagging entirely has only been correctly implemented by the 53c700 driver and isn't generally useful. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-25scsi_debug: add Report supported opcodes+tmfs; Compare and writeDouglas Gilbert
The Report supported operation codes command is very closely integrated into the table driven parser and very useful for testing it. Its cdb masks form the basis of the 'strict' parameter's checks. The Report supported TMFs command is a simple extension. The Compare and write command may even be useful, as it should be atomic due to the read-write lock that the driver uses on its backing store (ram). Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-25scsi_debug: change SCSI command parser to table drivenDouglas Gilbert
The existing 'big switch' parser in queuecommand() is changed to a table driven parser. The old and new queuecommand() were moved in the source so diff would not shuffle them. Apart from the new tables most other changes are refactoring existing response code to be more easily called out of the table parser. The 'strict' parameter is added so that cdb_s can be checked for non-zero values in parts of the cdb that are reserved. Some other changes include: tweak request sense response when D_SENSE differs; support NDOB in Write Same(16); and fix crash in Get LBA Status when LBP was inactive. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-25scsi_debug: add Capacity Changed Unit AttentionDouglas Gilbert
Via sysfs the virtual_gb scsi_debug parameter can be changed while LUs are in use. If that changes, the 'Capacity data has changed' Unit Attention is queued on all LUs. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-25scsi_debug: append inject error flags onto scsi_cmnd objectDouglas Gilbert
The way the existing scsi_debug command parser associated various inject error flags to a command was difficult to replicate in the table driven parser. This patch adds infrastructure to append those flags to the end of a scsi_cmnd object with the cmd_size host template option. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-25scsi_debug: pinpoint invalid field in sense dataDouglas Gilbert
Use Sense Key Specific field in the sense data of an ILLEGAL REQUEST to optionally pinpoint the location of the problem field. This may be either in the cdb or the associated parameter list. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-24scsi: drop reason argument from ->change_queue_depthChristoph Hellwig
Drop the now unused reason argument from the ->change_queue_depth method. Also add a return value to scsi_adjust_queue_depth, and rename it to scsi_change_queue_depth now that it can be used as the default ->change_queue_depth implementation. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-24scsi: avoid ->change_queue_depth indirection for queue full trackingChristoph Hellwig
All drivers use the implementation for ramping the queue up and down, so instead of overloading the change_queue_depth method call the implementation diretly if the driver opts into it by setting the track_queue_depth flag in the host template. Note that a few drivers validated the new queue depth in their change_queue_depth method, but as we never go over the queue depth set during slave_configure or the sysfs file this isn't nessecary and can safely be removed. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Venkatesh Srinivas <venkateshs@google.com>
2014-11-12scsi_debug: error message should say scsi_host_alloc not scsi_registerFinn Thain
Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-12scsi: don't force tagged_supported in driversChristoph Hellwig
Now that we also get proper values in cmd->request->tag for untagged commands, there is no need to force tagged_supported to on in drivers that need host-wide tags. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-12scsi: don't set tagging state from scsi_adjust_queue_depthChristoph Hellwig
Remove the tagged argument from scsi_adjust_queue_depth, and just let it handle the queue depth. For most drivers those two are fairly separate, given that most modern drivers don't care about the SCSI "tagged" status of a command at all, and many old drivers allow queuing of multiple untagged commands in the driver. Instead we start out with the ->simple_tags flag set before calling ->slave_configure, which is how all drivers actually looking at ->simple_tags except for one worke anyway. The one other case looks broken, but I've kept the behavior as-is for now. Except for that we only change ->simple_tags from the ->change_queue_type, and when rejecting a tag message in a single driver, so keeping this churn out of scsi_adjust_queue_depth is a clear win. Now that the usage of scsi_adjust_queue_depth is more obvious we can also remove all the trivial instances in ->slave_alloc or ->slave_configure that just set it to the cmd_per_lun default. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
2014-11-12scsi: provide a generic change_queue_type methodChristoph Hellwig
Most drivers use exactly the same implementation, so provide it as a library function. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-10-14scsi: replace strnicmp with strncasecmpRasmus Villemoes
The kernel used to contain two functions for length-delimited, case-insensitive string comparison, strnicmp with correct semantics and a slightly buggy strncasecmp. The latter is the POSIX name, so strnicmp was renamed to strncasecmp, and strnicmp made into a wrapper for the new strncasecmp to avoid breaking existing users. To allow the compat wrapper strnicmp to be removed at some point in the future, and to avoid the extra indirection cost, do s/strnicmp/strncasecmp/g. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 13:51:44 +0000