summaryrefslogtreecommitdiff
path: root/drivers/scsi/qla2xxx/qla_init.c
AgeCommit message (Collapse)Author
2015-04-16Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This is the usual grab bag of driver updates (lpfc, qla2xxx, storvsc, aacraid, ipr) plus an assortment of minor updates. There's also a major update to aic1542 which moves the driver into this millenium" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (106 commits) change SCSI Maintainer email sd, mmc, virtio_blk, string_helpers: fix block size units ufs: add support to allow non standard behaviours (quirks) ufs-qcom: save controller revision info in internal structure qla2xxx: Update driver version to 8.07.00.18-k qla2xxx: Restore physical port WWPN only, when port down detected for FA-WWPN port. qla2xxx: Fix virtual port configuration, when switch port is disabled/enabled. qla2xxx: Prevent multiple firmware dump collection for ISP27XX. qla2xxx: Disable Interrupt handshake for ISP27XX. qla2xxx: Add debugging info for MBX timeout. qla2xxx: Add serdes read/write support for ISP27XX qla2xxx: Add udev notification to save fw dump for ISP27XX qla2xxx: Add message for sucessful FW dump collected for ISP27XX. qla2xxx: Add support to load firmware from file for ISP 26XX/27XX. qla2xxx: Fix beacon blink for ISP27XX. qla2xxx: Increase the wait time for firmware to be ready for P3P. qla2xxx: Fix crash due to wrong casting of reg for ISP27XX. qla2xxx: Fix warnings reported by static checker. lpfc: Update version to 10.5.0.0 for upstream patch set lpfc: Update copyright to 2015 ...
2015-04-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree from Jiri Kosina: "Usual trivial tree updates. Nothing outstanding -- mostly printk() and comment fixes and unused identifier removals" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: goldfish: goldfish_tty_probe() is not using 'i' any more powerpc: Fix comment in smu.h qla2xxx: Fix printks in ql_log message lib: correct link to the original source for div64_u64 si2168, tda10071, m88ds3103: Fix firmware wording usb: storage: Fix printk in isd200_log_config() qla2xxx: Fix printk in qla25xx_setup_mode init/main: fix reset_device comment ipwireless: missing assignment goldfish: remove unreachable line of code coredump: Fix do_coredump() comment stacktrace.h: remove duplicate declaration task_struct smpboot.h: Remove unused function prototype treewide: Fix typo in printk messages treewide: Fix typo in printk messages mod_devicetable: fix comment for match_flags
2015-04-10qla2xxx: Add debugging info for MBX timeout.Himanshu Madhani
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-10qla2xxx: Increase the wait time for firmware to be ready for P3P.Chad Dupuis
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-03-06qla2xxx: Fix printks in ql_log messageYannick Guerrini
Change 'Fimware' to 'Firmware' Change 'enalbled' to 'enabled' Signed-off-by: Yannick Guerrini <yguerrini@tomshardware.fr> Acked-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-12-15qla2xxx: fix race in handling rport deletion during recovery causes panicLaurence Oberman
When we have an rport disconnect we race during rport deletion and re-connection resulting in a panic. When we do this, we call fc_remote_port_del() just before we do the calls to re-establish the session with the FC transport with fc_remote_port_add() and then fc_remote_port_rolechg(). If we remove the call to fc_remote_port_del() before re-establishing the connection this prevents the race. This patch has resolved this for multiple customers via test kernels. Suggested by Chad Dupuis, implemented and tested by Laurence Oberman. Signed-off-by: Laurence Oberman <loberman@redhat.com> Acked-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Handle chip reset in target mode.Arun Easi
A chip reset can occur after driver submits command to the stack. Abort command processing if a chip reset has occurred or in progress when you get a follow up for a command. Signed-off-by: Arun Easi <arun.easi@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Fail adapter initialization on load ram failure.Chad Dupuis
If we fail to load one of the segments of firmware fail the operation instead of trying to continue which will lead to a system crash since the pointers to the next segment will not be updated correctly. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Restore WWPN in case of Loop Dead.Himanshu Madhani
For FA-WWPN capable device, ISP2031 and ISP27XX, when loop dead is detected by a driver, restore WWPN from NVRAM. Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Force use of mailbox interface for flash access commands for ISP27xx.Chad Dupuis
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Enable diagnostic port using NVRAM parameters.Himanshu Madhani
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Declaration error cause stack corruption.Quinn Tran
Declaration error of mb array in qla2x00_iidma_fcport cause data to be written beyond the array. This ends up causing stack corruption. Signed-off-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Add diagnostic port functionality.Joe Carnuccio
Add support for the D-port (diagnostic port) fabric switch feature. (Fabric Switch initiates loopback style port testing) Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Add endianizer to max_payload_size modifier.Joe Carnuccio
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-25qla2xxx: Use dma_zalloc_coherentJoe Perches
Use the zeroing function instead of dma_alloc_coherent & memset(,0,) Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Do logins from a chip reset in DPC thread instead of the error ↵Chad Dupuis
handler thread. Attempting to do any logins from the SCSI reset handler can lead to a deadlock scenario if a rport times out and the FC transport layer. Move doing any port logins to the DPC thread so as not to impede the progress of the SCSI error handler thread and avoid deadlock situations. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: ISP27xx queue index shadow registers.Joe Carnuccio
For ISP27xx use the request/response queue index shadow registers to avoid directly access them on the PCI bus. Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Clear loop_id for ports that are marked lost during fabric scanning.Chad Dupuis
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Change copyright year to 2014 in all the source files.Armen Baloyan
Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Introduce fw_dump_flag to track fw dump progress.Hiral Patel
Signed-off-by: Hiral Patel <hiral.patel@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-03-19[SCSI] qla2xxx: Fix build errors related to invalid print fields on some ↵Chad Dupuis
architectures. Fixes some build warnings such as: drivers/scsi/qla2xxx/qla_attr.c:162:6: warning: format '%lx' expects argument of type 'long unsigned int', but argument 6 has type 'size_t'" and drivers/scsi/qla2xxx/qla_init.c:5198:7: warning: format '%lx' expects argument of type 'long unsigned int', but argument 5 has type 'uint32_t' [-Wformat] Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] qla2xxx: Add IOCB Abort command asynchronous handling.Armen Baloyan
Send aborts to the firmware via the request/response queue mechanism. Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] qla2xxx: Fix Task Management command asynchronous handlingArmen Baloyan
- Fix interpreting the wrong IOCB type for task management functions in the response path. - Merge the task management function handling for various adapters. Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] qla2xxx: Add support for ISP2071.Chad Dupuis
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com> Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] qla2xxx: Enable the Flash Access Control (FAC) mailbox command.Joe Carnuccio
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-12-19[SCSI] qla2xxx: Honor execute firmware failures.Chad Dupuis
If the execute firmware command fails we do not stop the rest of the initialization process which will continue to fail so if we encounter an error simply short circuit the process. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Add missing FCP statistics to sysfs interface.Joe Carnuccio
Add the missing FCP statistics to sysfs. Add reset FCP statistics functionality via sysfs. Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Reconfigure thermal temperature.Joe Carnuccio
For supported ISPS, Read asic temperature by calling the GET PARAMS (type C) mailbox command. Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Add setting of driver version string for vendor application.Joe Carnuccio
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Add support for ISP8044.Atul Deshmukh
[jejb: checkpatch fixes] Signed-off-by: Atul Deshmukh <atul.deshmukh@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Print some variables to hexadecimal string via %*phN formatOleksandr Khoshaba
The patch changes a specifier used to output some variables. Instead of using stack for each byte the '%*ph[CN]' allows to take a one pointer and prints entire buffer as a hexadecimal string with the separator ':' or ''. Signed-off-by: Oleksandr Khoshaba <Oleksandr.Khoshaba@gmail.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-07-08[SCSI] qla2xxx: Remove dead code in qla2x00_configure_hba()Bart Van Assche
At the end of qla2x00_configure_hba() we know that rval == QLA_SUCCESS. Hence remove the dead code. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-04-11[SCSI] qla2xxx: Enhancements to support ISPFx00.Giridhar Malavali
[jejb: fix up checkpatch issues] Signed-off-by: Andrew Vazquez <andrew.vasquez@qlogic.com> Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-04-06[SCSI] qla2xxx: Fix crash during firmware dump procedure.Arun Easi
System crashes, in initiator mode operation, with qla2xxx_copy_atioqueues() in stack trace when firmware dump is attempted. Check for atio_q_length alone does not indicate if atio_ring is allocated, make explicit check of atio_ring to avoid the crash. Applicable to ISP24xx, ISP25xx, ISP81xx & ISP83xx line of HBAs. Signed-off-by: Arun Easi <arun.easi@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-04-06[SCSI] Revert "qla2xxx: Add setting of driver version string for vendor ↵Joe Carnuccio
application." The original patch was not covering all the adapters and firmwares. This commit reverts 3a11711ad00caebee07e262d188cea66f3473c38. Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-22[SCSI] qla2xxx: Integrate generic card temperature with mezz card temperature.Joe Carnuccio
Give priority to I2C thermal. Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-22[SCSI] qla2xxx: Don't process RSCNs for a vport on the same physical adapter.Chad Dupuis
Currently,the driver is processes RSCNs for each new NPIV ports that is created. Processing the RSCN includes a name server query to see what has changed at the name server side. The name server query is performed by the physical port and each virtual port on the physical adapter (since the RSCN is passed to each virtual port for processing). As the number of virtual ports being created increases, this causes a lot of traffic and busies the firmware. Processing the RSCN for a virtual port we already have a priori knowledge of is not necessary so check the 24-bit fabric ID of the RSCN entry and skip processing it if the RSCN is for a virtual port we already know about. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-22[SCSI] qla2xxx: Add setting of driver version string for vendor application.Joe Carnuccio
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-22[SCSI] Revert "[SCSI] qla2xxx: Optimize existing port name server query ↵Joe Carnuccio
matching." This reverts commit c0822b63ccbf3b019059f384c290b080cae859f1. Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-22[SCSI] Revert "[SCSI] qla2xxx: Avoid losing any fc ports when loop id's are ↵Joe Carnuccio
exhausted." This reverts commit 4dc77c36f86c2dc4e3f483146d33b64d12c0da3f. Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-22[SCSI] qla2xxx: Update the copyright information.Saurav Kashyap
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-22[SCSI] qla2xxx: Unload hangs after issuing BSG commands to vport.Chad Dupuis
BSG code path increments ref count in the send path, but does not decrement in the return path leading to hang during unload of the driver. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-22[SCSI] qla2xxx: Do link initialization on get loop id failure.Joe Carnuccio
To avoid continually doing ISP resets when get loop id fails to obtain the adapter loop id, first try to do a link initialization. Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-22[SCSI] qla2xxx: Update the FTP site references in the driver sources.Giridhar Malavali
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-22[SCSI] qla2xxx: Enable target mode support for ISP83xx.Arun Easi
Signed-off-by: Arun Easi <arun.easi@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-22[SCSI] qla2xxx: Determine the number of outstanding commands based on ↵Chad Dupuis
available resources. Base the number of outstanding requests the driver will keep track of on the available resources instead of being hard-coded. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-11-30[SCSI] qla2xxx: Parameterize the link speed of hba rather than fcport.Joe Carnuccio
Parameterize qla2x00_get_link_speed_str() to be generic on link speed. Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-11-30[SCSI] qla2xxx: Move marking fcport online ahead of setting iiDMA speed.Joe Carnuccio
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-11-30[SCSI] qla2xxx: Add acquiring of risc semaphore before doing ISP reset.Joe Carnuccio
Try to acquire the semaphore; if semaphore is hung then acquire it by force. The ISP reset clears the semaphore, thereby implicitly releasing it. Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-11-30[SCSI] qla2xxx: Fix for warnings reported by sparse.Saurav Kashyap
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 16:59:32 +0000