summaryrefslogtreecommitdiff
path: root/drivers/scsi/pm8001
AgeCommit message (Collapse)Author
2013-08-26[SCSI] pm8001: clean up unnecessary MSI/MSI-X capability findYijing Wang
PCI core will initialize device MSI/MSI-X capability in pci_msi_init_pci_dev(). So device driver should use pci_dev->msi_cap/msix_cap to determine whether the device support MSI/MSI-X instead of using pci_find_capability(pci_dev, PCI_CAP_ID_MSI/MSIX). Access to PCIe device config space again will consume more time. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Acked-by: lindar_liu <lindar_liu@usish.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-26[SCSI] pm80xx: Fix for 32 bit compilation warningAnand Kumar Santhanam
Signed-off-by: Anandkumar.Santhanam@pmcs.com Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-07-05[SCSI] pm8001: use pdev->pm_cap instead of pci_find_capability(..,PCI_CAP_ID_PM)Yijing Wang
Pci core has been saved pm cap register offset by pdev->pm_cap in pci_pm_init() in init path. So we can use pdev->pm_cap instead of using pci_find_capability(pdev, PCI_CAP_ID_PM) for better performance and simplified code. Tested-by: Lindar Liu <lindar_liu@usish.com> Signed-off-by: Yijing Wang <wangyijing@huawei.com> Acked-by: Lindar Liu <lindar_liu@usish.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-07-04Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull first round of SCSI updates from James Bottomley: "The patch set is mostly driver updates (usf, zfcp, lpfc, mpt2sas, megaraid_sas, bfa, ipr) and a few bug fixes. Also of note is that the Buslogic driver has been rewritten to a better coding style and 64 bit support added. We also removed the libsas limitation on 16 bytes for the command size (currently no drivers make use of this)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (101 commits) [SCSI] megaraid: minor cut and paste error fixed. [SCSI] ufshcd-pltfrm: remove unnecessary dma_set_coherent_mask() call [SCSI] ufs: fix register address in UIC error interrupt handling [SCSI] ufshcd-pltfrm: add missing empty slot in ufs_of_match[] [SCSI] ufs: use devres functions for ufshcd [SCSI] ufs: Fix the response UPIU length setting [SCSI] ufs: rework link start-up process [SCSI] ufs: remove version check before IS reg clear [SCSI] ufs: amend interrupt configuration [SCSI] ufs: wrap the i/o access operations [SCSI] storvsc: Update the storage protocol to win8 level [SCSI] storvsc: Increase the value of scsi timeout for storvsc devices [SCSI] MAINTAINERS: Add myself as the maintainer for BusLogic SCSI driver [SCSI] BusLogic: Port driver to 64-bit. [SCSI] BusLogic: Fix style issues [SCSI] libiscsi: Added new boot entries in the session sysfs [SCSI] aacraid: Fix for arrays are going offline in the system. System hangs [SCSI] ipr: IOA Status Code(IOASC) update [SCSI] sd: Update WRITE SAME heuristics [SCSI] fnic: potential dead lock in fnic_is_abts_pending() ...
2013-06-04[SCSI] pm80xx: remove unneeded NULL checkDan Carpenter
Coccinelle complains about the inconsistent NULL checking on "t". It turns out the check isn't needed because we verified that "t" is non-NULL at the start of the function. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Anand Kumar Santhanam <AnandKumar.Santhanam@pmcs.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-06-04[SCSI] libsas: implement > 16 byte CDB supportJames Bottomley
Remove the arbitrary expectation in libsas that all SCSI commands are 16 bytes or less. Instead do all copies via cmd->cmd_len (and use a pointer to this in the libsas task instead of a copy). Note that this still doesn't enable > 16 byte CDB support in the underlying drivers because their internal format has to be fixed and the wire format of > 16 byte CDBs according to the SAS spec is different. the libsas drivers (isci, aic94xx, mvsas and pm8xxx are all updated for this change. Cc: Lukasz Dorau <lukasz.dorau@intel.com> Cc: Maciej Patelczyk <maciej.patelczyk@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Jack Wang <xjtuwjp@gmail.com> Cc: Lindar Liu <lindar_liu@usish.com> Cc: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-28treewide: Fix typo in printkMasanari Iida
Correct spelling typo in various part of drivers Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-05-10[SCSI] sas: unify the pointlessly separated enums sas_dev_type and ↵James Bottomley
sas_device_type These enums have been separate since the dawn of SAS, mainly because the latter is a procotol only enum and the former includes additional state for libsas. The dichotomy causes endless confusion about which one you should use where and leads to pointless warnings like this: drivers/scsi/mvsas/mv_sas.c: In function 'mvs_update_phyinfo': drivers/scsi/mvsas/mv_sas.c:1162:34: warning: comparison between 'enum sas_device_type' and 'enum sas_dev_type' [-Wenum-compare] Fix by eliminating one of them. The one kept is effectively the sas.h one, but call it sas_device_type and make sure the enums are all properly namespaced with the SAS_ prefix. Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-10[SCSI] pm80xx: thermal, sas controller config and error handling updateSakthivel K
Modified thermal configuration to happen after interrupt registration Added SAS controller configuration during initialization Added error handling logic to handle I_T_Nexus errors and variants [jejb: fix up tabs and spaces issues] Signed-off-by: Anand Kumar S <AnandKumar.Santhanam@pmcs.com> Acked-by: Jack Wang <jack_wang@usish.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-10[SCSI] pm80xx: NCQ error handling changesSakthivel K
Handled NCQ errors in the low level driver as the FW is not providing the faulty tag for NCQ errors for libsas to recover. [jejb: fix checkpatch issues] Signed-off-by: Anand Kumar S <AnandKumar.Santhanam@pmcs.com> Acked-by: Jack Wang <jack_wang@usish.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-10[SCSI] pm80xx: WWN Modification for PM8081/88/89 controllersSakthivel K
Individual WWN read operations based on controller. PM8081 - Read WWN from Flash VPD. PM8088/89 - Read WWN from EEPROM. PM8001 - Read WWN from NVM. Signed-off-by: Sakthivel K <Sakthivel.SaravananKamalRaju@pmcs.com> Signed-off-by: Anand Kumar S <AnandKumar.Santhanam@pmcs.com> Acked-by: Jack Wang <jack_wang@usish.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-10[SCSI] pm80xx: Changed module name and debug messages updateSakthivel K
Changed name in driver to pm80xx. Updated debug messages. Signed-off-by: Sakthivel K <Sakthivel.SaravananKamalRaju@pmcs.com> Signed-off-by: Anand Kumar S <AnandKumar.Santhanam@pmcs.com> Acked-by: Jack Wang <jack_wang@usish.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-10[SCSI] pm80xx: Firmware flash memory free fix, with addition of new memory ↵Sakthivel K
region for it Performing pci_free_consistent in tasklet had result in a core dump. So allocated a new memory region for it. Fix for passing proper address and operation in firmware flash update. Signed-off-by: Sakthivel K <Sakthivel.SaravananKamalRaju@pmcs.com> Signed-off-by: Anand Kumar S <AnandKumar.Santhanam@pmcs.com> Acked-by: Jack Wang <jack_wang@usish.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-10[SCSI] pm80xx: SPC new firmware changes for device id 0x8081 aloneSakthivel K
Additional bar shift for new SPC firmware, applicable to device id 0x8081 only. Signed-off-by: Sakthivel K <Sakthivel.SaravananKamalRaju@pmcs.com> Signed-off-by: Anand Kumar S <AnandKumar.Santhanam@pmcs.com> Acked-by: Jack Wang <jack_wang@usish.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-10[SCSI] pm80xx: Added SPCv/ve specific hardware functionalities and relevant ↵Sakthivel K
changes in common files Implementation of SPCv/ve specific hardware functionality and macros. Changing common functionalities wrt SPCv/ve operations. Conditional checks for SPC specific operations. Signed-off-by: Sakthivel K <Sakthivel.SaravananKamalRaju@pmcs.com> Signed-off-by: Anand Kumar S <AnandKumar.Santhanam@pmcs.com> Acked-by: Jack Wang <jack_wang@usish.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-10[SCSI] pm80xx: MSI-X implementation for using 64 interruptsSakthivel K
Implementation of interrupt handlers and tasklets to support upto 64 interrupt for the device. Signed-off-by: Sakthivel K <Sakthivel.SaravananKamalRaju@pmcs.com> Signed-off-by: Anand Kumar S <AnandKumar.Santhanam@pmcs.com> Acked-by: Jack Wang <jack_wang@usish.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-10[SCSI] pm80xx: Updated common functions common for SPC and SPCv/veSakthivel K
Update of function prototype for common function to SPC and SPCv/ve. Multiple queues implementation for IO. Signed-off-by: Sakthivel K <Sakthivel.SaravananKamalRaju@pmcs.com> Signed-off-by: Anand Kumar S <AnandKumar.Santhanam@pmcs.com> Acked-by: Jack Wang <jack_wang@usish.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-10[SCSI] pm80xx: Multiple inbound/outbound queue configurationSakthivel K
Memory allocation and configuration of multiple inbound and outbound queues. Signed-off-by: Sakthivel K <Sakthivel.SaravananKamalRaju@pmcs.com> Signed-off-by: Anand Kumar S <AnandKumar.Santhanam@pmcs.com> Acked-by: Jack Wang <jack_wang@usish.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-10[SCSI] pm80xx: Added SPCv/ve specific ids, variables and modify for SPCSakthivel K
Updated pci id table with device, vendor, subdevice and subvendor ids for 8081, 8088, 8089 SAS/SATA controllers. Added SPCv/ve related macros. Updated macros, hba info structure and other structures for SPCv/ve. Update of structure and variable names for SPC hardware functionalities. Signed-off-by: Sakthivel K <Sakthivel.SaravananKamalRaju@pmcs.com> Signed-off-by: Anand Kumar S <AnandKumar.Santhanam@pmcs.com> Acked-by: Jack Wang <jack_wang@usish.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-22[SCSI] pm80xx: fix for memory region freeSakthivel K
All memory regions are allocated based on variables total_len and alignment but free was based on element_size. Signed-off-by: Sakthivel K <DL.Team.PMC.SPC.Linux.open.source@pmcs.com> Signed-off-by: Anand Kumar S <DL.Team.PMC.SPC.Linux.open.source@pmcs.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-03Drivers: scsi: remove __dev* attributes.Greg Kroah-Hartman
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Adam Radford <linuxraid@lsi.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-20[SCSI] libsas: trim sas_task of slow path infrastructureDan Williams
The timer and the completion are only used for slow path tasks (smp, and lldd tmfs), yet we incur the allocation space and cpu setup time for every fast path task. Cc: Xiangliang Yu <yuxiangl@marvell.com> Acked-by: Jack Wang <jack_wang@usish.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] libsas: use ->lldd_I_T_nexus_reset for ->eh_bus_reset_handlerDan Williams
sas_eh_bus_reset_handler() amounts to sas_phy_reset() without notification of the reset to the lldd. If this is triggered from eh-cmnd recovery there may be sas_tasks for the lldd to terminate, so ->lldd_I_T_nexus_reset is warranted. Cc: Xiangliang Yu <yuxiangl@marvell.com> Cc: Luben Tuikov <ltuikov@yahoo.com> Cc: Jack Wang <jack_wang@usish.com> Reviewed-by: Jacek Danecki <jacek.danecki@intel.com> [jacek: modify pm8001_I_T_nexus_reset to return -ENODEV] Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-10[SCSI] pm8001: raise host can queueMark Salyzyn
This is a followup to a patch provided by Jack Wang on September 21 2011. After increasing the CAN_QUEUE to 510 in pm8001 we discovered some performance degredation from time to time. We needed to increase the MPI queue to compensate and ensure we never hit that limit. We also needed to double the margin to support event and administrivial commands that take from the pool resulting in an occasional largely unproductive command completion with soft error to the caller when the command pool is overloaded temporarily. Signed-off-by: Mark Salyzyn <mark_salyzyn@xyratex.com> Acked-by: Jack Wang <jack_wang@usish.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-23[SCSI] pm8001: fix endian issue with code optimization.Santosh Nayak
Data type of the 'tag' field of 'fw_flash_Update_resp' should be __le32. Data type of 'pHeader' should be __le32. Remove 2nd cast to 'piomb'. Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com> Acked-by: Jack Wang <jack_wang@usish.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-31Merge tag 'scsi-misc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6 Pull SCSI updates from James Bottomley: "This is primarily another round of driver updates (lpfc, bfa, fcoe, ipr) plus a new ufshcd driver. There shouldn't be anything controversial in here (The final deletion of scsi proc_ops which caused some build breakage has been held over until the next merge window to give us more time to stabilise it). I'm afraid, with me moving continents at exactly the wrong time, anything submitted after the merge window opened has been held over to the next merge window." * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (63 commits) [SCSI] ipr: Driver version 2.5.3 [SCSI] ipr: Increase alignment boundary of command blocks [SCSI] ipr: Increase max concurrent oustanding commands [SCSI] ipr: Remove unnecessary memory barriers [SCSI] ipr: Remove unnecessary interrupt clearing on new adapters [SCSI] ipr: Fix target id allocation re-use problem [SCSI] atp870u, mpt2sas, qla4xxx use pci_dev->revision [SCSI] fcoe: Drop the rtnl_mutex before calling fcoe_ctlr_link_up [SCSI] bfa: Update the driver version to 3.0.23.0 [SCSI] bfa: BSG and User interface fixes. [SCSI] bfa: Fix to avoid vport delete hang on request queue full scenario. [SCSI] bfa: Move service parameter programming logic into firmware. [SCSI] bfa: Revised Fabric Assigned Address(FAA) feature implementation. [SCSI] bfa: Flash controller IOC pll init fixes. [SCSI] bfa: Serialize the IOC hw semaphore unlock logic. [SCSI] bfa: Modify ISR to process pending completions [SCSI] bfa: Add fc host issue lip support [SCSI] mpt2sas: remove extraneous sas_log_info messages [SCSI] libfc: fcoe_transport_create fails in single-CPU environment [SCSI] fcoe: reduce contention for fcoe_rx_list lock [v2] ...
2012-03-28[SCSI] pm8001: Use spin_lock_irqsave() for task_state.Santosh Nayak
Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com> Acked-by: Jack Wang <jack_wang@usish.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-22Merge tag 'scsi-misc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6 SCSI updates from James Bottomley: "The update includes the usual assortment of driver updates (lpfc, qla2xxx, qla4xxx, bfa, bnx2fc, bnx2i, isci, fcoe, hpsa) plus a huge amount of infrastructure work in the SAS library and transport class as well as an iSCSI update. There's also a new SCSI based virtio driver." * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (177 commits) [SCSI] qla4xxx: Update driver version to 5.02.00-k15 [SCSI] qla4xxx: trivial cleanup [SCSI] qla4xxx: Fix sparse warning [SCSI] qla4xxx: Add support for multiple session per host. [SCSI] qla4xxx: Export CHAP index as sysfs attribute [SCSI] scsi_transport: Export CHAP index as sysfs attribute [SCSI] qla4xxx: Add support to display CHAP list and delete CHAP entry [SCSI] iscsi_transport: Add support to display CHAP list and delete CHAP entry [SCSI] pm8001: fix endian issue with code optimization. [SCSI] pm8001: Fix possible racing condition. [SCSI] pm8001: Fix bogus interrupt state flag issue. [SCSI] ipr: update PCI ID definitions for new adapters [SCSI] qla2xxx: handle default case in qla2x00_request_firmware() [SCSI] isci: improvements in driver unloading routine [SCSI] isci: improve phy event warnings [SCSI] isci: debug, provide state-enum-to-string conversions [SCSI] scsi_transport_sas: 'enable' phys on reset [SCSI] libsas: don't recover end devices attached to disabled phys [SCSI] libsas: fixup target_port_protocols for expanders that don't report sata [SCSI] libsas: set attached device type and target protocols for local phys ...
2012-02-29[SCSI] pm8001: fix endian issue with code optimization.Santosh Nayak
1. Fix endian issue. 2. Fix the following warning : " drivers/scsi/pm8001/pm8001_hwi.c:2932:32: warning: comparison between ‘enum sas_device_type’ and ‘enum sas_dev_type’". 3. Few code optimization. Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com> Acked-by: Jack Wang <jack_wang@usish.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29[SCSI] pm8001: Fix possible racing condition.Santosh Nayak
There is a possble racing scenario. 'process_oq' is called by two routines, as shown below. pm8001_8001_dispatch = { ....... .isr = pm8001_chip_isr --> process_oq,// A .isr_process_oq = process_oq, // B ..... } process_oq() --> process_one_iomb() --> mpi_sata_completion() In 'mpi_sata_completion', "pm8001_ha->lock" is first released. It means lock is taken before, which is true for the context A, as 'pm8001_ha->lock' is taken in 'pm8001_chip_isr()' But for context B there is no lock taken before and pm8001_ha->lock is unlocked in 'mpi_sata_completion()'. This may unlock the lock taken in context A. Possible racing ?? If 'pm8001_ha->lock' is taken in 'process_oq()' instead of 'pm8001_chip_isr' then the above issue can be avoided. Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com> Acked-by: Jack Wang <jack_wang@usish.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29[SCSI] pm8001: Fix bogus interrupt state flag issue.Santosh Nayak
Static checker is giving following warning: " error: calling 'spin_unlock_irqrestore()' with bogus flags" The code flow is as shown below: process_oq() --> process_one_iomb --> mpi_sata_completion In 'mpi_sata_completion' the first call for 'spin_unlock_irqrestore()' is with flags=0, which is as good as 'spin_unlock_irq()' ( unconditional interrupt enabling). So for better performance 'spin_unlock_irqrestore()' can be replaced with 'spin_unlock_irq()' and 'spin_lock_irqsave()' can be replaced by 'spin_lock_irq()'. Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com> Acked-by: Jack Wang <jack_wang@usish.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29[SCSI] libsas: async ata scanningDan Williams
libsas ata error handling is already async but this does not help the scan case. Move initial link recovery out from under host->scan_mutex, and delay synchronization with eh until after all port probe/recovery work has been queued. Device ordering is maintained with scan order by still calling sas_rphy_add() in order of domain discovery. Since we now scan the domain list when invoking libata-eh we need to be careful to check for fully initialized ata ports. Acked-by: Jack Wang <jack_wang@usish.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29[SCSI] libsas: fix sas_find_local_phy(), take phy referencesDan Williams
In the direct-attached case this routine returns the phy on which this device was first discovered. Which is broken if we want to support wide-targets, as this phy reference can become stale even though the port is still active. In the expander-attached case this routine tries to lookup the phy by scanning the attached sas addresses of the parent expander, and BUG_ONs if it can't find it. However since eh and the libsas workqueue run independently we can still be attempting device recovery via eh after libsas has recorded the device as detached. This is even easier to hit now that eh is blocked while device domain rediscovery takes place, and that libata is fed more timed out commands increasing the chances that it will try to recover the ata device. Arrange for dev->phy to always point to a last known good phy, it may be stale after the port is torn down, but it will catch up for wide port reconfigurations, and never be NULL. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] libsas: remove ata_port.lock management duties from llddsDan Williams
Each libsas driver (mvsas, pm8001, and isci) has invented a different method for managing the ap->lock. The lock is held by the ata ->queuecommand() path. mvsas drops it prior to acquiring any internal locks which allows it to hold its internal lock across calls to task->task_done(). This capability is important as it is the only way the driver can flush task->task_done() instances to guarantee that it no longer has any in-flight references to a domain_device at ->lldd_dev_gone() time. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] libsas: introduce sas_drain_work()Dan Williams
When an lldd invokes ->notify_port_event() it can trigger a chain of libsas events to: 1/ form the port and find the direct attached device 2/ if the attached device is an expander perform domain discovery A call to flush_workqueue() will only flush the initial port formation work. Currently libsas users need to call scsi_flush_work() up to the max depth of chain (which will grow from 2 to 3 when ata discovery is moved to its own discovery event). Instead of open coding multiple calls switch to use drain_workqueue() to flush sas work. drain_workqueue() does not handle new work submitted during the drain so libsas needs a bit of infrastructure to hold off unchained work submissions while a drain is in flight. A lldd ->notify() event is considered 'unchained' while a sas_discover_event() is 'chained'. As Tejun notes: "For now, I think it would be best to add private wrapper in libsas to support deferring unchained work items while draining." Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] libsas: kill sas_slave_destroyDan Williams
Per commit 3e4ec344 "libata: kill ATA_FLAG_DISABLED" needing to set ATA_DEV_NONE is a holdover from before libsas converted to the "new-style" ata-eh. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] pm8001: deficient responses to IO_XFER_ERROR_BREAK and ↵Mark Salyzyn
IO_XFER_OPEN_RETRY_TIMEOUT IO_XFER_ERROR_BREAK and IO_XFER_OPEN_RETRY_TIMEOUT are deficient of the required actions as outlined in the programming manual for the pm8001. Due to the overlapping code requirements of these recovery responses, we found it necessary to bundle them together into one patch. When a break is received during the command phase (ssp_completion), this is a result of a timeout or interruption on the bus. Logic suggests that we should retry the command. When a break is received during the data-phase (ssp_event), the task must be aborted on the target or it will retain a data-phase lock turning the target reticent to all future media commands yet will successfully respond to TUR, INQUIRY and ABORT leading eventually to target failure through several abort-cycle loops. The open retry interval is exceedingly short resulting in occasional target drop-off during expander resets or when targets push-back during bad-block remapping. Increased effective timeout from 130ms to 1.5 seconds for each try so as to trigger after the administrative inquiry/tur timeout in the scsi subsystem to keep error-recovery harmonics to a minimum. When an open retry timeout event is received, the action required by the targets is to issue an abort for the outstanding command then logic suggests we retry the command as this state is usually an indication of a credit block or busy condition on the target. We hijacked the pm8001_handle_event work queue handler so that it will handle task as an argument instead of device for the workers in support of the deferred handling outlined above. Moderate to Heavy bad-path testing on a 2.6.32 vintage kernel, compile-testing on scsi-misc-2.6 kernel ... Signed-off-by: Mark Salyzyn <mark_salyzyn@xyratex.com> Acked-by: Jack Wang <jack_wang@usish.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] pm8001: Add FUNC_GET_EVENTSMark Salyzyn
Jack noticed I dropped a patch fragment associated with a flags automatic variable in mpi_set_phys_g3_with_ssc (ooops) and that the pre-emptive locking that piggy-backed this patch was not in-fact necessary because of underlying atomic accesses to the hardware. Here is the updated patch fixing these two issues. The pm8001 driver is missing the FUNC_GET_EVENTS handler in the phy control function. Since the pm8001_bar4_shift function was not designed to be called at runtime, added locking surrounding the adjustment for all accesses. Signed-off-by: Mark Salyzyn <mark_salyzyn@xyratex.com> Acked-by: Jack Wang <jack_wang@usish.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] pm8001: fix lockup on phy_control hard reset.Mark Salyzyn
pm8001_phy_control PHY_FUNC_HARD_RESET locks up on second try via smp_phy_control because response HW_EVENT_PHY_START_STATUS fails to complete previous command. The PM8001F_RUN_TIME flag is not treated as a bit, but a state in all readers, yet once we are operational or in the run time state, the flags use a bit-set operation. Signed-off-by: Mark Salyzyn <mark_salyzyn@xyratex.com> Acked-by: Jack Wang <jack_wang@usish.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-03pm8001: fix printk typo in pm8001_hwi.cMasanari Iida
Correct typo "unresgister" to "unregister" and "deviece" to "device" in drivers/scsi/pm8001/pm8001_hwi.c Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Jack Wang <jack_wang@usish.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-10-02[SCSI] isci: export phy events via ->lldd_control_phy()Dan Williams
Allow the sas-transport-class to update events for local phys via a new PHY_FUNC_GET_EVENTS command to ->lldd_control_phy(). Fixup drivers that are not prepared for new enum phy_func values, and unify ->lldd_control_phy() error codes. These are the SAS defined phy events that are reported in a smp-report-phy-error-log command: * /sys/class/sas_phy/<phyX>/invalid_dword_count * /sys/class/sas_phy/<phyX>/running_disparity_error_count * /sys/class/sas_phy/<phyX>/loss_of_dword_sync_count * /sys/class/sas_phy/<phyX>/phy_reset_problem_count Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-02[SCSI] pm8001: missing break statementsMark Salyzyn
Code Inspection: found two missing break directives. First one will result in not retrying an a task that report IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY, the second will result in cosmetic debug printk conflicting statement stutter. Because checkpatch.pl came up with a warning regarding unnecessary space before a newline on one of the fragments associated with the diff context, I took the liberty of fixing all the cases of this issue in the pair of files touched by this defect. These cosmetic changes hide the break changes :-( To help focus, break changes are in pm8001_hwi.c fragment line 1649 for the IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY case statement and pm8001_sas.c line 1000 deals with the conflicting debug print stutter. Signed-off-by: Mark Salyzyn <mark_salyzyn@us.xyratex.com> Acked-by: Jack Wang <jack_wang@usish.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-02[SCSI] pm8001: fix DEV_IS_GONE infinite retryMark Salyzyn
On the pm8001, when a device is in the process of going away (device power off or hot plug), depending on the timing, the driver would return SAS_PHY_DOWN as the return value to the queuecommand DEV_IS_GONE logic. The net result is an near infinite retry (especially if SAS debugging is enabled), the logs will fill with: kernel: mpi_ssp_completion 2119:e21:SSP IO status 0x13 tag 0xcc1c0000 dlen=90 param=0xe kernel: wwn=5000c50034069e86 cdb=12 00 00 00 5a 00 00 00 00 00 00 00 00 00 00 00 kernel: sas: lldd_execute_task returned: 138 kernel: sas: lldd_execute_task returned: 138 kernel: sas: lldd_execute_task returned: 138 kernel: sas: lldd_execute_task returned: 138 kernel: sas: lldd_execute_task returned: 138 kernel: sas: lldd_execute_task returned: 138 kernel: sas: lldd_execute_task returned: 138 . . . This patch changes to leverage the port_attached logic to complete the command with a status of PHY_DOWN so that the disposition can be handled immediately and correctly. Signed-off-by: Mark Salyzyn <mark_salyzyn@us.xyratex.com> Acked-by: Jack Wang <jack_wang@usish.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-02[SCSI] pm8001: remove pm8001_slave_{alloc|configure}Dan Williams
libsas handles: 1/ limiting ata scanning to lun0 2/ changes to /sys/block/<sdX>/device/queue_depth for ata devices libata handles turning off ncq globally via kernel command line (libata.force=noncq) or sysfs (echo 1 > /sys/block/<sdX>/device/queue_depth). A lldd specific compile option is not necessary. Cc: Jack Wang <jack_wang@usish.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-27[SCSI] libsas: export sas_alloc_task()Dan Williams
Now that isci has added a 3rd open coded user of this functionality just share the libsas version. Acked-by: Jack Wang <jack_wang@usish.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-07-26atomic: use <linux/atomic.h>Arun Sharma
This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-26Merge branch 'master' into for-nextJiri Kosina
Fast-forwarded to current state of Linus' tree as there are patches to be applied for files that didn't exist on the old branch.
2011-04-10treewide: remove extra semicolonsJustin P. Mattock
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-02-12[SCSI] pm8001: simplify workqueue usageTejun Heo
pm8001 manages its own list of pending works and cancel them on device free. It is unnecessarily complex and has a race condition - the works are canceled but not synced, so the work could still be running during and after the data structures are freed. This patch simplifies workqueue usage. * A driver specific workqueue pm8001_wq is created to serve these work items. * To avoid confusion, the "queue" suffixes are dropped from work items and functions. * Delayed queueing was never used. pm8001_work now uses work_struct instead. * The driver no longer keeps track of pending works. All pm8001_works are queued to pm8001_wq and the workqueue is flushed as necessary. flush_scheduled_work() usage is removed during conversion. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Jack Wang <jack_wang@usish.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>