summaryrefslogtreecommitdiff
path: root/drivers/scsi/megaraid/megaraid_sas_fusion.c
AgeCommit message (Collapse)Author
2013-06-24[SCSI] megaraid_sas: Add support for Uneven Span PRL11Sumit.Saxena@lsi.com
MegaRAID older Firmware does not support uneven span configuration for PRL11. E.g User wants to create 34 Driver PRL11 config, it was not possible using old firmware, since it was not supported configuration in old firmware Old Firmware expect even number of Drives in each span and same number of physical drives at each span. Considering above design, 17 Drives at Span-0 and 17 drives at span-1 was not possible. Now, using this new feature Firmware and Driver both required changes. New Firmware can allow user to create 16 Drives at span-0 and 18 Drives at span-1. This will allow user to create 34 Drives Uneven span PRL11. RAID map is interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. Since legacy RAID map consider Even Span design, there was no place to keep Uneven span information in existing Raid map. Because of this limitation, for Uneven span VD, driver can not use RAID map. This patch address the changes required in Driver to support Uneven span PRL11 support. 1. Driver will find if Firmware has UnevenSpanSupport or not by reading Controller Info. 2. If Firmware has UnvenSpan PRL11 support, then Driver will inform about its capability of handling UnevenSpan PRL11 to the firmware. 3. Driver will update its copy of span info on each time Raid map update is called. 4. Follow different IO path if it is Uneven Span. (For Uneven Span, Driver uses Span Set info to find relavent fields for that particular Virtual Disk) More verbose prints will be available by setting "SPAN_DEBUG" to 1 at compilation time. Signed-off-by: Sumit Saxena <sumit.saxena@lsi.com> Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-06-24[SCSI] megaraid_sas: Add support for Extended MSI-x vectors for 12Gb/s ↵Sumit.Saxena@lsi.com
controller This Driver will use more than 8 MSI-x support provided by Invader/Fury max upto 128 MSI-x. [jejb: fix checkpatch warning] Signed-off-by: Sumit Saxena <sumit.saxena@lsi.com> Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-06-24[SCSI] megaraid_sas: Set IoFlags to enable Fast Path for JBODs for 12 Gb/s ↵Sumit.Saxena@lsi.com
controllers Signed-off-by: Sumit Saxena <sumit.saxena@lsi.com> Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-06-24[SCSI] megaraid_sas: Add support to display Customer branding details in syslogSumit.Saxena@lsi.com
Signed-off-by: Sumit Saxena <sumit.saxena@lsi.com> Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-06-24[SCSI] megaraid_sas: Add support for MegaRAID Fury (device ID-0x005f) 12Gb/s ↵Sumit.Saxena@lsi.com
controllers Signed-off-by: Sumit Saxena <sumit.saxena@lsi.com> Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-06-24[SCSI] megaraid_sas: Set IO request timeout value provided by OS timeout for ↵Sumit.Saxena@lsi.com
Tape devices Signed-off-by: Sumit Saxena <sumit.saxena@lsi.com> Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-22[SCSI] megaraid_sas: Dont load DevHandle unless FastPath enabledadam radford
The following patch for megaraid_sas will fix an issue where the driver should not be loading the DevHandle unless FastPath is enabled. If FastPath was not enabled, this means the hardware raid map validation failed for some reason, or the map was corrupted, which could mean the DevHandle could be invalid. Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-22[SCSI] megaraid_sas: Add 4k FastPath DIF supportadam radford
The following patch for megaraid_sas will allow Fastpath T10PI/DIF frame builds to work with 4k sector size. Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-10-09[SCSI] megaraid_sas: Version, Changelog, Copyright updateadam radford
Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-10-09[SCSI] megaraid_sas: Remove duplicate codeadam radford
Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-10-09[SCSI] megaraid_sas: Add SystemPD FastPath supportadam radford
Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-10-09[SCSI] megaraid_sas: Add array boundary check for SystemPDadam radford
Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-10-09[SCSI] megaraid_sas: Load io_request DataLength in bytesadam radford
Load io_request->DataLength in bytes for newer firmware that supports high availability. Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-10-09[SCSI] megaraid_sas: Remove un-needed completion_lock spinlock callsadam radford
Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-24[SCSI] megaraid_sas: combine kmalloc+memset into kzallocFengguang Wu
Use kzalloc rather than kmalloc followed by memset with 0. Generated by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-08-24[SCSI] megaraid_sas: Add resetwaittime module parameteradam radford
This allows a user to adjust the wait time in seconds after I/O timeout before resetting the adapter. Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-23[SCSI] megaraid_sas: Optimize HostMSIxVectors settingadam radford
The following patch for megaraid_sas removes an incorrect comment and optimizes the setting of HostMSIxVectors. This was found during a code review by Tomas Henzl @ RedHat. Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-16[SCSI] megaraid_sas: Add multiple MSI-X vector/multiple reply queue supportadam radford
Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-16[SCSI] megaraid_sas: Add support for MegaRAID 9360/9380 12GB/s controllersadam radford
Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-16[SCSI] megaraid_sas: Clear FUSION_IN_RESET before enabling interruptsadam radford
Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-16[SCSI] megaraid_sas: Clear state change interruptsadam radford
Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-16[SCSI] megaraid_sas: Remove some unnecessary codeadam radford
Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-16[SCSI] megaraid_sas: Fix mismatch in megasas_reset_fusion() mutex lock-unlockadam radford
Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-16[SCSI] megaraid_sas: Continue booting immediately if FW in FAULT at driver ↵adam radford
load time Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-05-24[SCSI] megaraid_sas: Convert 6,10,12 byte CDB's for FastPath IOadam radford
The following patch for megaraid_sas converts 6,10,12 byte CDB's to 16 byte CDB for large LBA's for FastPath IO. Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <jbottomley@parallels.com>
2011-05-24[SCSI] megaraid_sas: Check MFI_REG_STATE.fault.resetAdapteradam radford
The following patch for megaraid_sas fixes the function megasas_reset_fusion() and makes the reset code check MFI_REG_STATE.fault.resetAdapter. Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <jbottomley@parallels.com>
2011-05-24[SCSI] megaraid_sas: Remove un-used functionadam radford
The following patch for megaraid_sas removes un-used function megasas_return_cmd_for_smid(). Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <jbottomley@parallels.com>
2011-03-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (170 commits) [SCSI] scsi_dh_rdac: Add MD36xxf into device list [SCSI] scsi_debug: add consecutive medium errors [SCSI] libsas: fix ata list corruption issue [SCSI] hpsa: export resettable host attribute [SCSI] hpsa: move device attributes to avoid forward declarations [SCSI] scsi_debug: Logical Block Provisioning (SBC3r26) [SCSI] sd: Logical Block Provisioning update [SCSI] Include protection operation in SCSI command trace [SCSI] hpsa: fix incorrect PCI IDs and add two new ones (2nd try) [SCSI] target: Fix volume size misreporting for volumes > 2TB [SCSI] bnx2fc: Broadcom FCoE offload driver [SCSI] fcoe: fix broken fcoe interface reset [SCSI] fcoe: precedence bug in fcoe_filter_frames() [SCSI] libfcoe: Remove stale fcoe-netdev entries [SCSI] libfcoe: Move FCOE_MTU definition from fcoe.h to libfcoe.h [SCSI] libfc: introduce __fc_fill_fc_hdr that accepts fc_hdr as an argument [SCSI] fcoe, libfc: initialize EM anchors list and then update npiv EMs [SCSI] Revert "[SCSI] libfc: fix exchange being deleted when the abort itself is timed out" [SCSI] libfc: Fixing a memory leak when destroying an interface [SCSI] megaraid_sas: Version and Changelog update ... Fix up trivial conflicts due to whitespace differences in drivers/scsi/libsas/{sas_ata.c,sas_scsi_host.c}
2011-03-02drivers: remove extraneous includes of smp_lock.hArnd Bergmann
These were missed the last time I cleaned this up globally, because of code moving around or new code getting merged. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-02-28[SCSI] megaraid_sas: Fix megasas_build_dcdb_fusion to use correct LUN fieldadam radford
Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-28[SCSI] megaraid_sas: Fix megasas_build_dcdb_fusion to not filter by TYPE_DISKadam radford
Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-28[SCSI] megaraid_sas: Add missing check_and_restore_queue_depth calladam radford
Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-28[SCSI] megaraid_sas: Fix failure gotosadam radford
Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-22[SCSI] megaraid_sas: Add 9565/9285 specific codeadam radford
This patch adds MegaRAID 9265/9285 (Device id 0x5b) specific code Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 22:09:58 +0000