summaryrefslogtreecommitdiff
path: root/drivers/scsi/lpfc/lpfc_crtn.h
AgeCommit message (Collapse)Author
2016-11-08scsi: lpfc: Make lpfc_prot_xxx params per hba parametersJames Smart
Make lpfc_prot_mask and lpfc_prot_guard per hba parameters Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15lpfc: Copyright updatesJames Smart
Copyright updates Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15lpfc: Remove global lpfc_sli_mode attribute in leiu of per-hba lpfc_sli_modeJames Smart
Remove global lpfc_sli_mode attribute in leiu of per-hba lpfc_sli_mode Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15lpfc: Remove global lpfc_delay_discovery attribute in leiu of per-hba ↵James Smart
lpfc_delay_discovery Remove global lpfc_delay_discovery attribute in leiu of per-hba lpfc_delay_discovery Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15lpfc: Remove global lpfc_enable_npiv attribute in leiu of per-hba ↵James Smart
lpfc_enable_npiv Remove global lpfc_enable_npiv attribute in leiu of per-hba lpfc_enable_npiv Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15lpfc: Add support for XLane LUN priorityJames Smart
Add support for XLane LUN priority Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-12-21lpfc: Modularize and cleanup FDMI code in driverJames Smart
Modularize, cleanup, add comments - for FDMI code in driver Note: I don't like the comments with leading # - but as we have a lot if present, I'm deferring to handle it in one big fix later. Signed-off-by: Dick Kennedy <dick.kennedy@avagotech.com> Signed-off-by: James Smart <james.smart@avagotech.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-12-21lpfc: Fix the FLOGI discovery logic to comply with T11 standardsJames Smart
Fix the FLOGI discovery logic to comply with T11 standards We weren't properly setting fabric parameters, such as R_A_TOV and E_D_TOV, when we registered the vfi object in default configs and pt2pt configs. Revise to now pass service params with the values to the firmware and ensure they are reset on link bounce. Required reworking the call sequence in the discovery threads. Signed-off-by: Dick Kennedy <dick.kennedy@avagotech.com> Signed-off-by: James Smart <james.smart@avagotech.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-06-05lpfc: Add support for RDP ELS command.James Smart
Signed-off-by: Dick Kennedy <dick.kennedy@avagotech.com> Signed-off-by: James Smart <james.smart@avagotech.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-10lpfc: Update copyright to 2015James Smart
Update copyright to 2015 Signed-off-by: Dick Kennedy <dick.kennedy@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-10lpfc: Fix premature release of rpi bit in bitmaskJames Smart
Currently, the driver plays off the fact that older sli4 adapters have a different rpi access pattern that allowed for the rpi reference to be released earlier in the teardown sequence, allowing the driver to recycle the rpi value sooner. Newer sli4 adapters have a different access pattern that requires us to wait for a later mailbox completion. This changes the put call location on the newer sli4 adapters. Symptoms of the error are "0110 ELS" and the "0372 iotag" errors. Signed-off-by: Dick Kennedy <dick.kennedy@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-10lpfc: Fix host reset escalation killing all IOs.James Smart
Fix host reset escalation killing all IOs. SLI-3 adapters will use a new host template. The template differs from SLI-4 adapters in that it does not have an eh_host_reset_handler. Lpfc has traditionally never had a host_reset. The host reset handler was added when we ran into a stuck hardware condition on a SLI-4 adapter. The host_reset will reset and reinit the pci function, clearing the hardware condition. Unfortunately, the host reset handler uses attach/detach code paths, which makes scsi_add_host() and scsi_remove_host() calls. Meaning, a host_reset will completely remove the scsi_host from the system. As a new call to scsi_add_host() is made, the shost# changes, which results in completely new scsi_devices and device names. All the older scsi devices on the old shost# are now orphaned and unrecoverable. We realize we need to re-implement the host_reset_handler so the scsi_host stays registered across the host_reset, but that will be a rather lengthy effort. In the short term, we had an immediate need to restore the SLI-3 devices to their working behavior, with the easiest path being to remove their host_reset handler. Signed-off-by: Dick Kennedy <dick.kennedy@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2014-09-16lpfc: fix quarantined XRI recovery qualifier state in link bounceJames Smart
Fix quarantined XRI recovery qualifier state in link bounce Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: Dick Kennedy <dick.kennedy@emulex.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-06-02lpfc: Update Copyright on changed filesJames Smart
Update Copyright on changed files Signed-off-by: James Smart <james.smart@emulex.com> Reviewed-By: Dick Kennedy <dick.kennedy@emulex.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-06-02lpfc: Fixed locking for scsi task management commandsJames Smart
Fixed locking for scsi task management commands. Signed-off-by: James Smart <james.smart@emulex.com> Reviewed-By: Dick Kennedy <dick.kennedy@emulex.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-06-02lpfc: Fix SLI4 s abort loop to process all FCP rings and under ring_lockJames Smart
Fix SLI4 s abort loop to process all FCP rings and under ring_lock Signed-off-by: James Smart <james.smart@emulex.com> Reviewed-By: Dick Kennedy <dick.kennedy@emulex.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-03-15[SCSI] lpfc 8.3.45: Incorporate changes to use reason in change_queue_depth ↵James Smart
function. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] lpfc 8.3.45: Incorporated support of a low-latency io pathJames Smart
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] lpfc 8.3.44: Fix kernel panics from corrupted ndlp listJames Smart
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-06-26[SCSI] lpfc 8.3.40: Update Copyrights to 2013 for 8.3.38, 8.3.39, and 8.3.40 ↵James Smart
modifications Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-02[SCSI] lpfc 8.3.39: Fixed not returning FAILED status when SCSI invoking ↵James Smart
host reset handler failed Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-04-09[SCSI] lpfc 8.3.38: Fixed degraded performance after cable pullsJames Smart
The service parameters for the VPI/RPIs were incorrect, resulting in lower utilization Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] lpfc 8.3.37: Fixed no-context ABTS failed with BA_RJTJames Smart
Fixed no-context ABTS received on unsolicited receive queue failed with BA_RJT Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-11-27[SCSI] lpfc 8.3.36: Fixed boot from san failureJames Smart
Fixed boot from san failure when SLI4 FC device presented on the same PCI bus The request_firmware interface can induce delays while looking for firmware files, even if no fw file is present. In some situations the delays exceeded scan_wait timeouts, resulting in situations in which the boot device had not been discovered in time. Boot Device does not need to be on a lpfc device. Change request_firmware use to be module paramater driven. Default is to not attempt firmware download on boot. Add sysfs parameter to invoke firmware update. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-10-08[SCSI] lpfc 8.3.35: Fixed not reporting logical link speed to SCSI midlayer ↵James Smart
when QoS not on Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-14[SCSI] lpfc 8.3.34: Add LOGO support after ABTS complianceJames Smart
Make compliant with FC specs by sending LOGO after ABTS timeouts Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-14[SCSI] lpfc 8.3.33: Add lpfc_fcp_look_ahead module parameterJames Smart
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-14[SCSI] lpfc 8.3.33: Tie parallel I/O queues into separate MSIX vectorsJames Smart
Add fcp_io_channel module attribute to control amount of parallel I/O queues Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] lpfc 8.3.32: Correct provisioning change failure on local functionJames Smart
Fixed system held-up when performing resource provsion through same PCI function Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-17[SCSI] lpfc 8.3.31: Fixed system panic due to midlayer abort and driver ↵James Smart
complete race on SCSI cmd Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-17[SCSI] lpfc 8.3.31: Correct handling of SLI4-port XRI resource-provisioning ↵James Smart
profile change Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] lpfc 8.3.29: SLI related fixesJames Smart
SLI related fixes: - Fix REG_RPI fails on SLI4 HBA putting NPort into NPR state (126230) - Fix ELS FDISC failing with local reject / invalid RPI. (126350) - Fix reset port when reset is needed during fw_dump (125807) - Fix unbounded firmware revision string from port cause panic (126560) - Fix driver behavior when receiving an ADISC (126654) - Fix driver not returning when bad ndlp found in abts error event handling (126209) - Add more driver logs in area of SLI4 port error attention and reset recovery (126813, 124466) - Fix failure in handling large CQ/EQ identifiers in an IOV environment (126856) - Fix for driver using duplicate RPIs after lancer port reset (126723) - Clear vport->fc_myDID in lpfc_els_issue_fdisc to guarentee a zero SID (126779, 126897) - Fix for SLI4 Port delivery for BLS ABORT ACC (126289) Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-15[SCSI] lpfc 8.3.28: Add Loopback support for SLI4 adaptersJames Smart
- Add Basic support for SLI4 Loopback. (CR 124951, 125766, 124951, 125843, 125832, 125843) - Added missing protection in setting/clearing of phba->link_flag bit field (CR 125994) - Use link type and link number obtained from READ_CONFIG mailbox command. (CR 126264) Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-15[SCSI] lpfc 8.3.28: Add support for ABTS failure handlingJames Smart
Add support for ABTS failure handling: - Add asynchronous ABTS notification event feature to driver (CR 124578) - Change driver message 3092 and 3116 to KERN_WARNING (CR 124768) - Alter the SCR ELS command to use the temporary RPI and the Destination DID for SLI4-FC (CR 126070) Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-15[SCSI] lpfc 8.3.28: SLI fixes and added SLI4 supportJames Smart
Adapter (SLI) interface fixes: - Modify WQ handling to use entry_repost (CR 123981) - Fix for ABTS. Do not free original IOCB whenever ABTS fails. (CR 115829) - Check board for FCoE before reading FCoE paramaters (CR124731) - Add support for SLI4 FC Loop mode (CR 124721) - Add support for resource count changes during fw reset. (CR 125888, 125675) - Increase CQE count from 256 to 1024. (CR 126149) Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-15[SCSI] lpfc 8.3.28: Miscellaneous fixes in sysfs and mgmt interfacesJames Smart
Miscellaneous fixes in sysfs and mgmt interfaces: - Added SLI4 INTF_TYPE and SLI_FAMILY as sub-field to the fwrev sysfs attribute (CR 124103) - Added a sysfs attribute "protocol" to report SLI4 port link protocol type (CR 124102) - Increment mix-and-match minor number by 1 for added "protocol" sysfs attribute. (124102) - Move the link speed check into the generic sli3/sli4 code path. (CR 124185, 124122) - Deleted check for inExtWLen (CR 122523) - Add the word "offline" to message 2889 (CR 124385) - Conditionalize the firmware upgrade/downgrade so that it is only attempted for SLI4 type 2 boards (CR 124406) - Return an error if the mbox sysfs is called. (CR 124210) - When port_state is less than LPFC_VPORT_READY, report FC_PORTSTATE_BYPASSED (CR 120018) - Added driver support for performing persistent linkdown based on configure region 23 (CR 124534) - Added restore state and error log when sysfs board_mode attribute access failed (CR 124158) - Added support for SLI4_CONFIG non-embedded COMN_GET_CNTL_ADDL_ATTR pass-through (CR 124466) - Rejecting un-supported multi-buffer mailbox commands (CR 124771) - Byte swap the extended data request and response data for extended mailbox data (CR 125081) Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-16[SCSI] lpfc 8.3.27: Fix queue allocation failure recoveryJames Smart
Fix queue allocation failure recovery - Move the allocation of the Queues closer to the creation of the queues. - If there is a problem with creation, or if the HBA is reset, the queues will be completely freed and re allocated. - Only allocate fcp_eq_hdl if cfg_fcp_eq_count is non-zero. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-16[SCSI] lpfc 8.3.27: Changed worst case mailbox timeoutJames Smart
Changed the timeout value for flash-based SLI_CONFIG (0x9B) mailbox command to 300 seconds for worst case flash delays. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-07-27[SCSI] lpfc 8.3.25: Add FCF priority failover functionalityJames Smart
This patch implements a new FCF failover policy for the lpfc driver. It allows the driver to choose which FCF to failover to based on the FCF priority. This patch also introduces a new sysfs parameter (fcf_failover_policy) to allow the user to choose which FCF failover policy to use. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-07-27[SCSI] lpfc 8.3.25: Enhancements to Debug infrastructureJames Smart
Enhancements to Debug infrastructure - debugfs additions for new hardware. - Correct stack overflow in lpfc_debugfs_dumpHBASlim_data() - Correct warning on uninitialized reg_val in lpfc_idiag_drbacc_write() - Separated the iDiag command for capturing mailbox commands for generic issue mailbox command entry point and for BSG multi-buffer handling. - Added capturing dumping capabiliy of mailbox command and external buffer for the completion of the mailbox command so that the outcome can be examined. - Changed all the iDiag command structure data array indexing introduced so far with properly defined macros. - Added SLI4 device PCI BAR memory mapped register read/browse, write-by- value, set-bit, and clear-bit methods for both interface type 0 and interface type 2. - Corrected warnings on mbxstatus being uninitialized in error paths in lpfc_bsg.c Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-07-27[SCSI] lpfc 8.3.25: PCI and SR-IOV FixesJames Smart
PCI and SR-IOV Fixes - Call pci_save_state after the pci_restore_state completes. - After calling pci_enable_pcie_error_reporting() and checking the return value for logging messages from rc, reset rc to 0 to it will not later be interpreted for error. - Read PCI config space SR-IOV capability to get the number of VFs supported. - Check for the PF's supported number of VFs before invoking PCI enable sriov API call and log error message that user requested number of VFs is beyond the PF capability if such request is passed in. - Added check for Physical function with Virtual Functions attached. If so, first disable all the VFs before proceeding to device reset. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-07-27[SCSI] lpfc 8.3.25: Adapter Interface fixes and changesJames Smart
Adapter Interface fixes and changes - Modify the macro field from lpfc_init_vpi_vpi to lpfc_init_vfi_vpi - Add the new CQE_CODE_RECEIVE_V1 CQE Code, add code in the driver to handle the new Code the same as the CQE_CODE_RECEIVE code except that there are two new checks for this code that will cause the driver to use the new V1 macros for rq_id and fcf_id. - Fix a bug in lpfc_prep_seq() where the size out of the first CQE was ONLY being used, even though multiple dmabufs make up the sequence, each have their own CQE with potentially different sizes. - Fix bug in lpfc_bsg_ct_unsol_event() where the ulpContext and ulpWord[3] fields of the XMIT_SEQUENCE64_CX IOCB were being calculated incorrectly. - Do physical to logical translation before indexing into the active XRI array. - Populate physical vpi in the iocb data structure. - Put the current accumulated total in each IOCB in the chain as we are walking thru then. The last IOCB in the chain should have the total length of the sequence. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-05-26[SCSI] lpfc 8.3.24: Add resource extent supportJames Smart
This patch adds support for hardware that returns resource ids via extents rather than contiguous ranges. [jejb: checkpatch.pl fixes] Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <jbottomley@parallels.com>
2011-05-26[SCSI] lpfc 8.3.24: Add request-firmware supportJames Smart
Add request-firmware support: - Add support for request_firmware interface for INTF2 SLI4 ports. - Add ability to reset SLI4 INTF2 ports. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <jbottomley@parallels.com>
2011-05-26[SCSI] lpfc 8.3.24: Add SR-IOV controlJames Smart
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <jbottomley@parallels.com>
2011-05-26[SCSI] lpfc 8.3.24: Miscellaneous Fixes and CorrectionsJames Smart
Miscellaneous Fixes and Corrections - Remove the memset in the lpfc_sli4_remove_rpi_hdrs call. - Correct swapping of SGE word 2 relative to offset value - Reorganize CQ and EQ usage to comply with SLI4 Specification. - Expand the driver to check the rn bit. Only detect an error if the error bit is set and the RN bit is NOT set. - If mailbox completion code is not success AND the mailbox status is success, then and only then will the driver overwrite the mailbox status. - When driver initializing device, if the device is on a PCIe bus, set PCI's "needs fundamental reset" bit so that EEH uses fundamental reset instead of hot reset for recovery. - Prevent driver from using new WWN when changed in firmware (until driver reload) - When HBA reports maximum SGE size > 0xffffffff (infinite), override with 0x80000000. - Fixed potential missed SLI4 device initialization failure conditions. - Added 100ms delay before driver action following IF_TYPE_2 function reset. - Reverted patch to UNREG/REG on PLOGI to mapped/unmapped node. - Add a check for the CVL received flag in the fcf inuse routine to avoid unregistering the fcf if Devloss fires before Delay discover timer fires. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <jbottomley@parallels.com>
2011-03-23[SCSI] lpfc 8.3.22: Update Copyright DatesJames Smart
Update Copyright Dates Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-23[SCSI] lpfc 8.3.22: T10-DIF correctionsJames Smart
T10-DIF corrections - Add selective reset jump table entry - Split T10-DIF BDEs that cross 4K boundary Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-18[SCSI] lpfc 8.3.21: FC Discovery changesJames Smart
FC Discovery changes - Treat received PLOGI while logged in as a relogin (unregister and reregister). - Added a timer to delay Nport discovery when clean bit is cleared and Fabric portname/nodename/FCID is changed. - Invalidate Port's DID when receiving PLOGI from p2p port with CONFIG_PORT mailbox command. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-18[SCSI] lpfc 8.3.21: RRQ Implementation fixesJames Smart
RRQ Implementation fixes - Added checks to prevent a call to findnode_did in clr_active_rrq - Added the del_sync_timer call for the rrq_tmr to the stop_hba_timers routine. - Added a check in __lpfc_set_active_rrq for the driver unloading to prevent adding an rrq when the driver is being removed. - Add code to scsi_iocb_cmpl to check for the remote stop and add the rrq. - Added the same check to els retry. - Added code to compare the source did in the els rrq to the vports did and chose the right exchange ID. - Initialize the start_cmd pointer to indicate when we have looped through all of the scsi buffers. - Remove the need for the lock around the clearing of the active bit in the rrq. - Added code to clean the els and fcp xri aborted list and remove the all of the RRQs for a deleted vport. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-30 01:44:58 +0000