summaryrefslogtreecommitdiff
path: root/drivers/scsi/iscsi_tcp.c
AgeCommit message (Collapse)Author
2019-02-05scsi: remove bidirectional command supportChristoph Hellwig
No real need for bidi support once the OSD code is gone. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-20scsi: iscsi: Capture iscsi debug messages using tracepointsFred Herard
This commit enhances iscsi initiator modules to capture iscsi debug messages using linux kernel tracepoint facility: https://www.kernel.org/doc/Documentation/trace/tracepoints.txt The following tracepoint events have been created under the iscsi tracepoint event group: iscsi_dbg_conn - to capture connection debug messages (libiscsi module) iscsi_dbg_session - to capture session debug messages (libiscsi module) iscsi_dbg_eh - to capture error handling debug messages (libiscsi module) iscsi_dbg_tcp - to capture iscsi tcp debug messages (libiscsi_tcp module) iscsi_dbg_sw_tcp - to capture iscsi sw tcp debug messages (iscsi_tcp module) iscsi_dbg_trans_session - to cpature iscsi transsport sess debug messages (scsi_transport_iscsi module) iscsi_dbg_trans_conn - to capture iscsi transport conn debug messages (scsi_transport_iscsi module) [mkp: typos] Signed-off-by: Fred Herard <fred.herard@oracle.com> Reviewed-by: Rajan Shanmugavelu <rajan.shanmugavelu@oracle.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-18scsi: remove the use_clustering flagChristoph Hellwig
The same effects can be achieved by setting the dma_boundary to PAGE_SIZE - 1 and the max_segment_size to PAGE_SIZE, so shift those settings into the drivers. Note that in many cases the setting might be bogus, but this keeps the status quo. [mkp: fix myrs and myrb] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16scsi: iscsi_tcp: Explicitly cast param in iscsi_sw_tcp_host_get_paramNathan Chancellor
Clang warns when one enumerated type is implicitly converted to another. drivers/scsi/iscsi_tcp.c:803:15: warning: implicit conversion from enumeration type 'enum iscsi_host_param' to different enumeration type 'enum iscsi_param' [-Wenum-conversion] &addr, param, buf); ^~~~~ 1 warning generated. iscsi_conn_get_addr_param handles ISCSI_HOST_PARAM_IPADDRESS just fine so add an explicit cast to iscsi_param to make it clear to Clang that this is expected behavior. Link: https://github.com/ClangBuiltLinux/linux/issues/153 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-19scsi: iscsi_tcp: don't set a bounce limitChristoph Hellwig
The default already is to never bounce, so the call is a no-op. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-05Merge tag 'for-4.17/block-20180402' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block layer updates from Jens Axboe: "It's a pretty quiet round this time, which is nice. This contains: - series from Bart, cleaning up the way we set/test/clear atomic queue flags. - series from Bart, fixing races between gendisk and queue registration and removal. - set of bcache fixes and improvements from various folks, by way of Michael Lyle. - set of lightnvm updates from Matias, most of it being the 1.2 to 2.0 transition. - removal of unused DIO flags from Nikolay. - blk-mq/sbitmap memory ordering fixes from Omar. - divide-by-zero fix for BFQ from Paolo. - minor documentation patches from Randy. - timeout fix from Tejun. - Alpha "can't write a char atomically" fix from Mikulas. - set of NVMe fixes by way of Keith. - bsg and bsg-lib improvements from Christoph. - a few sed-opal fixes from Jonas. - cdrom check-disk-change deadlock fix from Maurizio. - various little fixes, comment fixes, etc from various folks" * tag 'for-4.17/block-20180402' of git://git.kernel.dk/linux-block: (139 commits) blk-mq: Directly schedule q->timeout_work when aborting a request blktrace: fix comment in blktrace_api.h lightnvm: remove function name in strings lightnvm: pblk: remove some unnecessary NULL checks lightnvm: pblk: don't recover unwritten lines lightnvm: pblk: implement 2.0 support lightnvm: pblk: implement get log report chunk lightnvm: pblk: rename ppaf* to addrf* lightnvm: pblk: check for supported version lightnvm: implement get log report chunk helpers lightnvm: make address conversions depend on generic device lightnvm: add support for 2.0 address format lightnvm: normalize geometry nomenclature lightnvm: complete geo structure with maxoc* lightnvm: add shorten OCSSD version in geo lightnvm: add minor version to generic geometry lightnvm: simplify geometry structure lightnvm: pblk: refactor init/exit sequences lightnvm: Avoid validation of default op value lightnvm: centralize permission check for lightnvm ioctl ...
2018-04-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Minor conflicts in drivers/net/ethernet/mellanox/mlx5/core/en_rep.c, we had some overlapping changes: 1) In 'net' MLX5E_PARAMS_LOG_{SQ,RQ}_SIZE --> MLX5E_REP_PARAMS_LOG_{SQ,RQ}_SIZE 2) In 'net-next' params->log_rq_size is renamed to be params->log_rq_mtu_frames. 3) In 'net-next' params->hard_mtu is added. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-19scsi: iscsi_tcp: set BDI_CAP_STABLE_WRITES when data digest enabledJianchao Wang
iscsi tcp will first send out data, then calculate and send data digest. If we don't have BDI_CAP_STABLE_WRITES, the page cache will be written in spite of the on going writeback. Consequently, wrong digest will be got and sent to target. To fix this, set BDI_CAP_STABLE_WRITES when data digest is enabled in iscsi_tcp .slave_configure callback. Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Acked-by: Chris Leech <cleech@redhat.com> Acked-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-08iscsi: Use blk_queue_flag_set()Bart Van Assche
Use blk_queue_flag_set() instead of open-coding this function. Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-02-12net: make getname() functions return length rather than use int* parameterDenys Vlasenko
Changes since v1: Added changes in these files: drivers/infiniband/hw/usnic/usnic_transport.c drivers/staging/lustre/lnet/lnet/lib-socket.c drivers/target/iscsi/iscsi_target_login.c drivers/vhost/net.c fs/dlm/lowcomms.c fs/ocfs2/cluster/tcp.c security/tomoyo/network.c Before: All these functions either return a negative error indicator, or store length of sockaddr into "int *socklen" parameter and return zero on success. "int *socklen" parameter is awkward. For example, if caller does not care, it still needs to provide on-stack storage for the value it does not need. None of the many FOO_getname() functions of various protocols ever used old value of *socklen. They always just overwrite it. This change drops this parameter, and makes all these functions, on success, return length of sockaddr. It's always >= 0 and can be differentiated from an error. Tests in callers are changed from "if (err)" to "if (err < 0)", where needed. rpc_sockname() lost "int buflen" parameter, since its only use was to be passed to kernel_getsockname() as &buflen and subsequently not used in any way. Userspace API is not changed. text data bss dec hex filename 30108430 2633624 873672 33615726 200ef6e vmlinux.before.o 30108109 2633612 873672 33615393 200ee21 vmlinux.o Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> CC: David S. Miller <davem@davemloft.net> CC: linux-kernel@vger.kernel.org CC: netdev@vger.kernel.org CC: linux-bluetooth@vger.kernel.org CC: linux-decnet-user@lists.sourceforge.net CC: linux-wireless@vger.kernel.org CC: linux-rdma@vger.kernel.org CC: linux-sctp@vger.kernel.org CC: linux-nfs@vger.kernel.org CC: linux-x25@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-03scsi: doc: fix iscsi-related kernel-doc warningsRandy Dunlap
Fix kernel-doc warnings in drivers/scsi/ that are related to iscsi support interfaces. Fixes these kernel-doc warnings: (tested by adding these files to a new target.rst documentation file: WIP) ../drivers/scsi/libiscsi.c:2740: warning: No description found for parameter 'dd_size' ../drivers/scsi/libiscsi.c:2740: warning: No description found for parameter 'id' ../drivers/scsi/libiscsi.c:2961: warning: No description found for parameter 'cls_conn' ../drivers/scsi/iscsi_tcp.c:313: warning: No description found for parameter 'conn' ../drivers/scsi/iscsi_tcp.c:363: warning: No description found for parameter 'conn' ../drivers/scsi/libiscsi_tcp.c:810: warning: No description found for parameter 'tcp_conn' ../drivers/scsi/libiscsi_tcp.c:810: warning: No description found for parameter 'segment' ../drivers/scsi/libiscsi_tcp.c:887: warning: No description found for parameter 'offloaded' ../drivers/scsi/libiscsi_tcp.c:887: warning: No description found for parameter 'status' ../drivers/scsi/libiscsi_tcp.c:887: warning: Excess function parameter 'offload' description in 'iscsi_tcp_recv_skb' ../drivers/scsi/libiscsi_tcp.c:964: warning: Excess function parameter 'conn' description in 'iscsi_tcp_task_init' ../drivers/scsi/libiscsi_tcp.c:964: warning: Excess function parameter 'sc' description in 'iscsi_tcp_task_init' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Cc: linux-scsi@vger.kernel.org Cc: target-devel@vger.kernel.org Cc: Sagi Grimberg <sagi@grimberg.me> Cc: linux-rdma@vger.kernel.org Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: iscsi_tcp: Remove a set-but-not-used variableBart Van Assche
This patch avoids that gcc reports the following warning when building with W=1: drivers/scsi/iscsi_tcp.c:166:24: warning: variable ?session? set but not used [-Wunused-but-set-variable] Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Cc: Lee Duncan <lduncan@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-05-08treewide: convert PF_MEMALLOC manipulations to new helpersVlastimil Babka
We now have memalloc_noreclaim_{save,restore} helpers for robust setting and clearing of PF_MEMALLOC. Let's convert the code which was using the generic tsk_restore_flags(). No functional change. [vbabka@suse.cz: in net/core/sock.c the hunk is missing] Link: http://lkml.kernel.org/r/20170405074700.29871-4-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Josef Bacik <jbacik@fb.com> Cc: Lee Duncan <lduncan@suse.com> Cc: Chris Leech <cleech@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Wouter Verhelst <w@uter.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-04-11sched/core: Remove 'task' parameter and rename tsk_restore_flags() to ↵NeilBrown
current_restore_flags() It is not safe for one thread to modify the ->flags of another thread as there is no locking that can protect the update. So tsk_restore_flags(), which takes a task pointer and modifies the flags, is an invitation to do the wrong thing. All current users pass "current" as the task, so no developers have accepted that invitation. It would be best to ensure it remains that way. So rename tsk_restore_flags() to current_restore_flags() and don't pass in a task_struct pointer. Always operate on current->flags. Signed-off-by: NeilBrown <neilb@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-06scsi: remove eh_timed_out methods in the transport templateChristoph Hellwig
Instead define the timeout behavior purely based on the host_template eh_timed_out method and wire up the existing transport implementations in the host templates. This also clears up the confusion that the transport template method overrides the host template one, so some drivers have to re-override the transport template one. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-05-19scsi_tcp: block BH in TCP callbacksEric Dumazet
iscsi_sw_tcp_data_ready() and iscsi_sw_tcp_state_change() were using read_lock(&sk->sk_callback_lock) which is fine if caller disabled BH. TCP stack no longer has this requirement and can run from process context. Use read_lock_bh() variant to restore previous assumption. Ideally this code could use RCU instead... Fixes: 5413d1babe8f ("net: do not block BH while processing socket backlog") Fixes: d41a69f1d390 ("tcp: make tcp_sendmsg() aware of socket backlog") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Venkatesh Srinivas <venkateshs@google.com> Acked-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-27iscsi_tcp: Use ahashHerbert Xu
This patch replaces uses of the long obsolete hash interface with ahash. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
2014-11-24scsi: drop reason argument from ->change_queue_depthChristoph Hellwig
Drop the now unused reason argument from the ->change_queue_depth method. Also add a return value to scsi_adjust_queue_depth, and rename it to scsi_change_queue_depth now that it can be used as the default ->change_queue_depth implementation. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-24scsi: avoid ->change_queue_depth indirection for queue full trackingChristoph Hellwig
All drivers use the implementation for ramping the queue up and down, so instead of overloading the change_queue_depth method call the implementation diretly if the driver opts into it by setting the track_queue_depth flag in the host template. Note that a few drivers validated the new queue depth in their change_queue_depth method, but as we never go over the queue depth set during slave_configure or the sysfs file this isn't nessecary and can safely be removed. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Venkatesh Srinivas <venkateshs@google.com>
2014-09-30iscsi_tcp: export port being usedMike Christie
This just has iscsi_tcp support ISCSI_PARAM_LOCAL_PORT which exports the local port being used by the iscsi connection. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-23net: Split sk_no_check into sk_no_check_{rx,tx}Tom Herbert
Define separate fields in the sock structure for configuring disabling checksums in both TX and RX-- sk_no_check_tx and sk_no_check_rx. The SO_NO_CHECK socket option only affects sk_no_check_tx. Also, removed UDP_CSUM_* defines since they are no longer necessary. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-11net: Fix use after free by removing length arg from sk_data_ready callbacks.David S. Miller
Several spots in the kernel perform a sequence like: skb_queue_tail(&sk->s_receive_queue, skb); sk->sk_data_ready(sk, skb->len); But at the moment we place the SKB onto the socket receive queue it can be consumed and freed up. So this skb->len access is potentially to freed up memory. Furthermore, the skb->len can be modified by the consumer so it is possible that the value isn't accurate. And finally, no actual implementation of this callback actually uses the length argument. And since nobody actually cared about it's value, lots of call sites pass arbitrary values in such as '0' and even '1'. So just remove the length argument from the callback, that way there is no confusion whatsoever and all of these use-after-free cases get fixed as a side effect. Based upon a patch by Eric Dumazet and his suggestion to audit this issue tree-wide. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-15[SCSI] iscsi_tcp: check for valid session before accessingMike Christie
Check that the session is setup before accessing its connection. This fixes a oops where userspace tries to get the ip address before the session is bound to a host. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] libiscsi: Reduce locking contention in fast pathShlomo Pongratz
Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] iscsi_tcp: consider session state in iscsi_sw_sk_state_checkChris Leech
It seems some iSCSI targets (including the Linux kernel target) close the TCP connection from the target side immediately after processing a session logout. When a TCP FIN comes in right after the iSCSI logout response, iscsi_sw_sk_state_check sees the local socket as not yet being in CLOSE_WAIT or CLOSE and logs an error. But the initiator would close the connection right after processing the logout response anyway, and the error is confusing to admins who just requested that the session be shut down. This adds a check of the session state, and suppresses the error if we are in the process of logging out. Signed-off-by: Chris Leech <cleech@redhat.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-04-11[SCSI] iscsi_tcp: support PF_MEMALLOC/__GFP_MEMALLOCMike Christie
This patch has software iscsi use PF_MEMALLOC/__GFP_MEMALLOC to be able to better support swap over iscsi disks similar to what was added for nbd. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-24[SCSI] iscsi_tcp: increase max_lun to ~0, don't careRob Evers
Signed-off-by: Rob Evers <revers@redhat.com> Acked-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-21sock: Introduce named constants for sk_reusePavel Emelyanov
Name them in a "backward compatible" manner, i.e. reuse or not are still 1 and 0 respectively. The reuse value of 2 means that the socket with it will forcibly reuse everyone else's port. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-19[SCSI] libiscsi_tcp: fix max_r2t manipulationMike Christie
Problem description from Xi Wang: A large max_r2t could lead to integer overflow in subsequent call to iscsi_tcp_r2tpool_alloc(), allocating a smaller buffer than expected and leading to out-of-bounds write. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-03switch ->is_visible() to returning umode_tAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-10-31scsi: Fix up files implicitly depending on module.h inclusionPaul Gortmaker
The module.h header was implicitly present everywhere, so files with no explicit include of the module infrastructure would build anyway. We are now removing the implicit include, and so we need to call out the module.h file that we need explicitly. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-08-27[SCSI] iscsi class: sysfs group is_visible callout for iscsi host attrsMike Christie
The iscsi class currently does not support writable sysfs attrs for LLD sysfs settings. This patch converts the iscsi class and driver's host attrs to use the attribute container sysfs group and the sysfs group's is_visible callout to be able to support readable or writable sysfs attrs. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-27[SCSI] iscsi class: sysfs group is_visible callout for session attrsMike Christie
The iscsi class currently does not support writable sysfs attrs for LLD sysfs settings. This patch converts the iscsi class and driver's session attrs to use the attribute container sysfs group and the sysfs group's is_visible callout to be able to support readable or writable sysfs attrs. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-27[SCSI] iscsi cls: sysfs group is_visible callout for conn attrsMike Christie
The iscsi class currently does not support writable sysfs attrs for LLD sysfs settings. This patch converts the iscsi class and drivers to use the attribute container sysfs group and the sysfs group's is_visible callout to be able to support readable or writable sysfs attrs. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29[SCSI] iscsi_tcp: fix locking around iscsi sk user dataMike Christie
iscsi_sw_tcp_conn_restore_callbacks could have set the sk_user_data field to NULL then iscsi_sw_tcp_data_ready could read that and try to access the NULL pointer. This adds some checks for NULL sk_user_data in the sk callback functions and it uses the sk_callback_lock to set/get that sk_user_data field. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-02-24[SCSI] iscsi_tcp: use iscsi_conn_get_addr_param libiscsi functionMike Christie
This has iscsi_tcp use the iscsi_conn_get_addr_param libiscsi function. It also drops the use of the libiscsi session portal buffers, so they can be removed in the next patches. Instead of copying the values at bind time we get them during get() time. If we are not connected userspace will now get -ENOTCONN, so it knows that connection is disconnected instead of a possible stale value. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-05-25[SCSI] iscsi_tcp: remove sk_sleep checkMike Christie
There is no need to call sk_sleep before calling wake_up_interruptible, because the wait_queue_head is now with the socket. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-05-21Fix networking tree iscsi_tcp.c mis-mergeLinus Torvalds
The removal of the 'waitqueue_active()' test in commit d7d05548a6 ("[SCSI] iscsi_tcp: fix relogin/shutdown hang") got incorrectly resolved by David when he back-merged the main git tree into the networking tree in commit 278554bd65 ("Merge branch 'master' of master.kernel.org:..."). There was a content conflict due to 'sock->sk->sk_sleep' being changed into 'sk_sleep(sock->sk)' in the networking tree, but David didn't pick up the iscsi change from the main tree. Reported-by: James Bottomley <James.Bottomley@suse.de> Cc: David Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (182 commits) [SCSI] aacraid: add an ifdef'd device delete case instead of taking the device offline [SCSI] aacraid: prohibit access to array container space [SCSI] aacraid: add support for handling ATA pass-through commands. [SCSI] aacraid: expose physical devices for models with newer firmware [SCSI] aacraid: respond automatically to volumes added by config tool [SCSI] fcoe: fix fcoe module ref counting [SCSI] libfcoe: FIP Keep-Alive messages for VPorts are sent with incorrect port_id and wwn [SCSI] libfcoe: Fix incorrect MAC address clearing [SCSI] fcoe: fix a circular locking issue with rtnl and sysfs mutex [SCSI] libfc: Move the port_id into lport [SCSI] fcoe: move link speed checking into its own routine [SCSI] libfc: Remove extra pointer check [SCSI] libfc: Remove unused fc_get_host_port_type [SCSI] fcoe: fixes wrong error exit in fcoe_create [SCSI] libfc: set seq_id for incoming sequence [SCSI] qla2xxx: Updates to ISP82xx support. [SCSI] qla2xxx: Optionally disable target reset. [SCSI] qla2xxx: ensure flash operation and host reset via sg_reset are mutually exclusive [SCSI] qla2xxx: Silence bogus warning by gcc for wrap and did. [SCSI] qla2xxx: T10 DIF support added. ...
2010-05-18[SCSI] Merge scsi-misc-2.6 into scsi-rc-fixes-2.6James Bottomley
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-20net: sk_sleep() helperEric Dumazet
Define a new function to return the waitqueue of a "struct sock". static inline wait_queue_head_t *sk_sleep(struct sock *sk) { return sk->sk_sleep; } Change all read occurrences of sk_sleep by a call to this function. Needed for a future RCU conversion. sk_sleep wont be a field directly available. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-11[SCSI] iscsi_tcp: Change iscsi_sw_tcp_conn_restore_callbacks argumentsAvi Kaplan
This patch changes the arguments to iscsi_sw_tcp_conn_restore_callbacks, so that it works like the function to set the callbacks and because in upcoming patches we need a iscsi_conn. Signed-off-by: Avi Kaplan <savik751@gmail.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] iscsi_tcp: fix relogin/shutdown hangMike Christie
When I made this patch: b64e77f70b8c11766e967e3485331a9e6ef01390 it was to solve a problem where we were already on the waitqueue becuase a connection problem/logout caused us to be on there when we were cleaning up the session. If we happen to get on queue for more normal reasons like their just does not happen to be any send space at the same time we are closing the connection we hit a race and get stuck in the wait. We should not check if the waitqueue is active because we could race with the network code. If the network xmit code is just about to enter the prepare to wait when we check for the waitqueue to be active then we will miss each other and the network code will fall into the wait and we will not run wake_up. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-03[SCSI] libiscsi: Make iscsi_eh_target_reset start with session resetJayamohan Kallickal
The iscsi_eh_target_reset has been modified to attempt target reset only. If it fails, then iscsi_eh_session_reset will be called. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] iscsi_tcp: wake xmit thread when killing sessionMike Christie
If the connection is bad, then the xmit thread could end up waiting a long time (up to sendtmeo seconds) in tcp_sendpage. This patch has us set the sk_error and wake up the xmit thread so we can quickly fail. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] libiscsi: add warm target reset tmf supportMike Christie
This implements warm target reset tmf support for the scsi-ml target reset callback. Previously we would just drop the session in that callback. This patch will now try a target reset and if that fails drop the session. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-02[SCSI] libiscsi: iscsi_session_setup to allow for private spaceJayamohan Kallickal
This patch contains changes that allow iscsi_session_setup to allocate private space for LLD's Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com> Acked-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-05[SCSI] iscsi_tcp: add new conn error to indicate tcp conn closedMike Christie
If a target closed the connection, we will detect it in the state_changed or data_ready callout. This adds a new conn error value to use for this problem, so it is not confused with when the initiator throws a conn error and drops the connection. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>