summaryrefslogtreecommitdiff
path: root/drivers/scsi/hpsa.c
AgeCommit message (Collapse)Author
2014-06-02hpsa: remove messages about volume status VPD inquiry page not supportedStephen M. Cameron
They are annoying and do not help anyone. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Reviewed-by: Justin Lindley <justin.lindley@hp.com> Reviewed-by: Mike Miller <michael.miller@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-06-02hpsa: report check condition even if no sense data present for ioaccel2 modeStephen M. Cameron
It shouldn't happen that we get a check condition with no sense data, but if it does, we shouldn't just drop the check condition on the floor. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Reviewed-by: Justin Lindley <justin.lindley@hp.com> Reviewed-by: Mike Miller <michael.miller@canonical.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-06-02hpsa: remove bad unlikely annotation from device list updating codeStephen M. Cameron
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Reviewed-by: Justin Lindley <justin.lindley@hp.com> Reviewed-by: Mike Miller <michael.miller@canonical.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-06-02hpsa: kill annoying messages about SSD Smart Path retriesStephen M. Cameron
There's nothing the user can or should do about these messages, the commands are retried down the normal RAID path, and the messages just flood the logs and sap performance. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Reviewed-by: Joe Handzik <joseph.t.handzik@hp.com> Reviewed-by: Mike Miller <michael.miller@canonical.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-06-02hpsa: define extended_report_lun_entry data structureStephen M. Cameron
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Reviewed-by: Joe Handzik <joseph.t.handzik@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-06-02hpsa: Rearrange start_io to avoid one unlock/lock sequence in main io pathStephen M. Cameron
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Reviewed-by: Joe Handzik <joseph.t.handzik@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-06-02hpsa: avoid unnecessary readl on every command submissionStephen M. Cameron
for controllers which support either of the ioaccel transport methods. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Reviewed-by: Mike Miller <michael.miller@canonical.com> Reviewed-by: Joe Handzik <joseph.t.handzik@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-06-02hpsa: use per-cpu variable for lockup_detectedStephen M. Cameron
Avoid excessive locking by using per-cpu variable for lockup_detected Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Reviewed-by: Scott Teel <scott.teel@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-06-02hpsa: set irq affinity hints to route MSI-X vectors across CPUsStephen M. Cameron
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Reviewed-by: Mike Miller <michael.miller@canonical.com> Reviewed-by: Scott Teel <scott.teel@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-06-02hpsa: allocate reply queues individuallyStephen M. Cameron
Now that we can allocate more than 4 reply queues (up to 64) we shouldn't try to make them share the same allocation but should allocate them separately. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Reviewed-by: Mike Miller <michael.miller@canonical.com> Reviewed-by: Scott Teel <scott.teel@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-06-02hpsa: choose number of reply queues more intelligently.Stephen M. Cameron
No sense having 8 or 16 reply queues if you only have 4 cpus, and likewise no sense limiting to 8 reply queues if you have many more cpus. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Reviewed-by: Mike Miller <michael.miller@canonical.com> Reviewed-by: Scott Teel <scott.teel@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-06-02hpsa: use gcc aligned attribute instead of manually padding structsStephen M. Cameron
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Reviewed-by: Webb Scales <webb.scales@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-06-02hpsa: change doorbell reset delay to ten secondsJustin Lindley
After 3.22 firmware, PMC firmware guys tell us the previous 5 second delay after a reset now needs to be 10 secs to avoid a PCIe error due to the driver looking at the controller too soon after the reset. Signed-off-by: Justin Lindley <justin.lindley@hp.com> Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Reviewed-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-06-02hpsa: allow passthru ioctls to work with bidirectional commandsStephen M. Cameron
Treat the the data direction bits as a bit mask allowing both READ and WRITE at the same time instead of testing for equality to see if it's a exclusively a READ or a WRITE. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Reviewed-by: Mike Miller <michael.miller@canonical.com> Reviewed-by: Webb Scales <webb.scales@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-06-02hpsa: remove unused fields from struct ctlr_infoStephen M. Cameron
The fields "major", "max_outstanding", and "usage_count" of struct ctlr_info were not used for anything. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Reviewed-by: Mike Miller <michael.miller@canonical.com> Reviewed-by: Webb Scales <webb.scales@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-28hpsa: fix bad comparison of signed with unsigned in hpsa_update_scsi_devicesJoe Handzik
rescan_hba_mode was defined as a u8 so could never be less than zero: rescan_hba_mode = hpsa_hba_mode_enabled(h); if (rescan_hba_mode < 0) goto out; Signed-off-by: Joe Handzik <joseph.t.handzik@hp.com> Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19hpsa: do not ignore failure of sense controller parameters commandJoe Handzik
Signed-off-by: Joe Handzik <joseph.t.handzik@hp.com> Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19hpsa: fix memory leak in hpsa_hba_mode_enabledJoe Handzik
And while we're at it fix a magic number Signed-off-by: Joe Handzik <joseph.t.handzik@hp.com> Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19hpsa: add new Smart Array PCI IDs (May 2014)Joe Handzik
Signed-off-by: Scott Teel <scott.teel@hp.com> Signed-off-by: Joe Handzik <joseph.t.handzik@hp.com> Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Cc: stable@vger.kernel.org Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19hpsa: Checking for a NULL return from a kzalloc callJoe Handzik
Checking for a NULL return from a kzalloc call in hpsa_get_pdisk_of_ioaccel2. Signed-off-by: Scott Teel <scott.teel@hp.com> Signed-off-by: Joe Handzik <joseph.t.handzik@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-04-21[SCSI] hpsa: fix NULL dereference in hpsa_put_ctlr_into_performant_mode()scameron@beardog.cce.hp.com
Initialize local variable trans_support before it is used rather than after. It is supposed to contain the value of a register on the controller containing bits that describe which transport modes the controller supports (e.g. "performant", "ioaccel1", "ioaccel2"). A NULL pointer dereference will almost certainly occur if trans_support is not initialized at the right point. If for example the uninitialized trans_support value does not have the bit set for ioaccel2 support when it should be, then ioaccel2_alloc_cmds_and_bft() will not get called as it should be and the h->ioaccel2_blockFetchTable array will remain NULL instead of being allocated. Too late, trans_support finally gets initialized with the correct value with ioaccel2 mode bit set, which later causes calc_bucket_map() to be called to fill in h->ioaccel2_blockFetchTable[]. However h->ioaccel2_blockFetchTable is NULL because it didn't get allocated because earlier trans_support wasn't initialized at the right point. Fixes: e1f7de0cdd68d246d7008241cd9e443a54f880a8 Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Reported-by: Baoquan He <bhe@redhat.com> Tested-by: Baoquan He <bhe@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-19[SCSI] hpsa: update driver version to 3.4.4-1Stephen M. Cameron
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-19[SCSI] hpsa: fix bad endif placement in RAID 5 mapper codeStephen M. Cameron
It caused the i/o request to always be counted as ineligible for the accelerated i/o path on 32 bit systems and negatively affected performance. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] hpsa: Do not zero fields of ioaccel2 command structure twiceStephen M. Cameron
Structure was already memset to zero at the top of hpsa_scsi_ioaccel2_queue_command Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] hpsa: Add hba mode to the hpsa driverStephen M. Cameron
This allows exposing physical disks behind Smart Array controllers to the OS (if the controller has the right firmware and is in "hba" mode) Signed-off-by: Joe Handzik <joseph.t.handzik@hp.com> Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] hpsa: increase the probability of a reported success after a device resetTomas Henzl
rc is set in the loop, and it isn't set back to zero anywhere this patch fixes it Signed-off-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] hpsa: bring format-in-progress drives online when readyStephen M. Cameron
Do not expose drives that are undergoing a format immediately to the OS, instead wait until they are ready before bringing them online. This is so that logical drives created with "rapid parity initialization" do not get immediately kicked off the system for being unresponsive. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] hpsa: remove unused kthread.h headerStephen M. Cameron
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] hpsa: Add support for a few HP Storage controllersStephen M. Cameron
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] hpsa add sysfs debug switch for raid map debugging messagesStephen M. Cameron
Signed-off-by: Scott Teel <scott.teel@hp.com> Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] hpsa: improve error messages for driver initiated commandsStephen M. Cameron
On encountering unexpected error conditions from driver initiated commands, print something useful like CDB and sense data rather than something useless like the kernel virtual address of the command buffer. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] hpsa: only do device rescan for certain eventsStephen M. Cameron
Do no rescan on every events -- way too many rescans are triggered if we don't filter the events. Limit rescans to be triggered by the following set of events: * controller state change * enclosure hot plug * physical drive state change * logical drive state change * redundant controller state change * accelerated io enabled/disabled * accelerated io configuration change Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] hpsa: when switching out of accel mode await only accel command ↵Stephen M. Cameron
completions Don't wait for *all* commands to complete, only for accelerated mode commands. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] hpsa: add controller base data-at-rest encryption compatibility ioaccel2Scott Teel
Add controller-based data-at-rest encryption compatibility to ioaccel2 path (HP SSD Smart Path). Encryption feature requires driver to supply additional fields for encryption enable, tweak index, and data encryption key index in the ioaccel2 request structure. Encryption enable flag and data encryption key index come from raid_map data structure from raid offload command. During ioaccel2 submission, check device structure's raid map to see if encryption is enabled for the device. If so, call new function below. Add function set_encrypt_ioaccel2 to set encryption flag, data encryption key index, and calculate tweak value from request's logical block address. Signed-off-by: Scott Teel <scott.teel@hp.com> Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] hpsa: update source file copyrightsScott Teel
Signed-off-by: Scott Teel <scott.teel@hp.com> Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] hpsa: retry certain ioaccel error cases on the RAID pathScott Teel
Change the handling of HP SSD Smart Path errors with status: 0x02 CHECK CONDITION 0x08 BUSY 0x18 RESERVATION CONFLICT 0x40 TASK ABORTED So that they get retried on the RAID Path. Signed-off-by: Scott Teel <scott.teel@hp.com> Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] hpsa: do not inquire for unsupported ioaccel status vpd pageStephen M. Cameron
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] hpsa: allow VPD page zero to be queriedStephen M. Cameron
Code was confused and assumed that page zero was not VPD page and all non-zero pages were VPD pages. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] hpsa: rescan devices on ioaccel2 errorScott Teel
Allow driver to schedule a rescan whenever a request fails on the ioaccel2 path. This eliminates the possibility of driver getting stuck in non-ioaccel mode. IOaccel mode (HP SSD Smart Path) is disabled by driver upon error detection. Driver relied on idea that request would be retried through normal path, and a subsequent error would occur on that path, and be processed by controller firmware. As part of that process, controller disables ioaccel mode and later reinstates it, signalling driver to change modes. In some error cases, the error will not duplicate on the standard path, so the driver could get stuck in non-ioaccel mode. To avoid that, we allow driver to request a rescan during the next run of the rescan thread. Signed-off-by: Scott Teel <scott.teel@hp.com> Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] hpsa: allow user to disable accelerated i/o pathScott Teel
Allow SSD Smart Path for a controller to be disabled by the user, regardless of settings in controller firmware or array configuration. To disable: echo 0 > /sys/class/scsi_host/host<id>/acciopath_status To re-enable: echo 1 > /sys/class/scsi_host/host<id>/acciopath_status To check state: cat /sys/class/scsi_host/host<id>/acciopath_status Signed-off-by: Scott Teel <scott.teel@hp.com> Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] hpsa: complete the ioaccel raidmap codeScott Teel
Load balance across members of a N-way mirror set, and handle the meta-RAID levels: R10, R50, R60. Signed-off-by: Scott Teel <scott.teel@hp.com> Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] hpsa: make device update copy the raid map alsoStephen M. Cameron
Otherwise we could wind up using incorrect raid map data, and then very bad things would likely happen. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] hpsa: add task management for ioaccel mode 2Scott Teel
Underlying firmware cannot handle task abort on accelerated path (SSD Smart Path). Change abort requests for accelerated path commands to physical target reset. Send reset request on normal IO path. Signed-off-by: Scott Teel <scott.teel@hp.com> Signed-off-by: Mike Miller <michael.miller@canonical.com> Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] hpsa: teach hpsa_device_reset to do either target or lun resetScott Teel
Signed-off-by: Scott Teel <scott.teel@hp.com> Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] hpsa: get ioaccel mode 2 i/o workingScott Teel
Signed-off-by: Scott Teel <scott.teel@hp.com> Signed-off-by: Joe Handzik <Joseph.T.Handzik@hp.com> Signed-off-by: Mike Miller <michael.miller@canonical.com> Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] hpsa: initialize controller to perform io accelerator mode 2Stephen M. Cameron
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Scott Teel <scott.teel@hp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] hpsa: get physical device handles for io accel mode 2 as well as mode 1Mike MIller
Signed-off-by: Mike MIller <michael.miller@canonical.com> Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] hpsa: do ioaccel mode 2 resource allocationsStephen M. Cameron
Signed-off-by: Mike Miller <michael.miller@canonical.com> Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] hpsa: Acknowledge controller events in ioaccell mode 2 as well as mode 1Stephen M. Cameron
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] hpsa: add ioaccel mode 2 structure definitionsMike Miller
Signed-off-by: Mike Miller <michael.miller@canonical.com> Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-29 09:43:19 +0000