summaryrefslogtreecommitdiff
path: root/drivers/scsi/fcoe
AgeCommit message (Collapse)Author
2014-11-24scsi: avoid ->change_queue_depth indirection for queue full trackingChristoph Hellwig
All drivers use the implementation for ramping the queue up and down, so instead of overloading the change_queue_depth method call the implementation diretly if the driver opts into it by setting the track_queue_depth flag in the host template. Note that a few drivers validated the new queue depth in their change_queue_depth method, but as we never go over the queue depth set during slave_configure or the sysfs file this isn't nessecary and can safely be removed. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Venkatesh Srinivas <venkateshs@google.com>
2014-11-21vlan: make __vlan_hwaccel_put_tag return voidJiri Pirko
Always returns the same skb it gets, so change to void. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-12scsi: always assign block layer tags if enabledChristoph Hellwig
Allow a driver to ask for block layer tags by setting .use_blk_tags in the host template, in which case it will always see a valid value in request->tag, similar to the behavior when using blk-mq. This means even SCSI "untagged" commands will now have a tag, which is especially useful when using a host-wide tag map. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-12scsi: provide a generic change_queue_type methodChristoph Hellwig
Most drivers use exactly the same implementation, so provide it as a library function. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-10-13Merge branch 'sched-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: "The main changes in this cycle were: - Optimized support for Intel "Cluster-on-Die" (CoD) topologies (Dave Hansen) - Various sched/idle refinements for better idle handling (Nicolas Pitre, Daniel Lezcano, Chuansheng Liu, Vincent Guittot) - sched/numa updates and optimizations (Rik van Riel) - sysbench speedup (Vincent Guittot) - capacity calculation cleanups/refactoring (Vincent Guittot) - Various cleanups to thread group iteration (Oleg Nesterov) - Double-rq-lock removal optimization and various refactorings (Kirill Tkhai) - various sched/deadline fixes ... and lots of other changes" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (72 commits) sched/dl: Use dl_bw_of() under rcu_read_lock_sched() sched/fair: Delete resched_cpu() from idle_balance() sched, time: Fix build error with 64 bit cputime_t on 32 bit systems sched: Improve sysbench performance by fixing spurious active migration sched/x86: Fix up typo in topology detection x86, sched: Add new topology for multi-NUMA-node CPUs sched/rt: Use resched_curr() in task_tick_rt() sched: Use rq->rd in sched_setaffinity() under RCU read lock sched: cleanup: Rename 'out_unlock' to 'out_free_new_mask' sched: Use dl_bw_of() under RCU read lock sched/fair: Remove duplicate code from can_migrate_task() sched, mips, ia64: Remove __ARCH_WANT_UNLOCKED_CTXSW sched: print_rq(): Don't use tasklist_lock sched: normalize_rt_tasks(): Don't use _irqsave for tasklist_lock, use task_rq_lock() sched: Fix the task-group check in tg_has_rt_tasks() sched/fair: Leverage the idle state info when choosing the "idlest" cpu sched: Let the scheduler see CPU idle states sched/deadline: Fix inter- exclusive cpusets migrations sched/deadline: Clear dl_entity params when setscheduling to different class sched/numa: Kill the wrong/dead TASK_DEAD check in task_numa_fault() ...
2014-09-30fcoe: extend ethtool to FC port speed mappingChris Leech
add support for 20 Gbit and 40 Gbit links Signed-off-by: Chris Leech <cleech@redhat.com> Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-19sched, cleanup, treewide: Remove set_current_state(TASK_RUNNING) after ↵Kirill Tkhai
schedule() schedule(), io_schedule() and schedule_timeout() always return with TASK_RUNNING state set, so one more setting is unnecessary. (All places in patch are visible good, only exception is kiblnd_scheduler() from: drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c Its schedule() is one line above standard 3 lines of unified diff) No places where set_current_state() is used for mb(). Signed-off-by: Kirill Tkhai <ktkhai@parallels.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: http://lkml.kernel.org/r/1410529254.3569.23.camel@tkhai Cc: Alasdair Kergon <agk@redhat.com> Cc: Anil Belur <askb23@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dave Kleikamp <shaggy@kernel.org> Cc: David Airlie <airlied@linux.ie> Cc: David Howells <dhowells@redhat.com> Cc: Dmitry Eremin <dmitry.eremin@intel.com> Cc: Frank Blaschka <blaschka@linux.vnet.ibm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Isaac Huang <he.huang@intel.com> Cc: James E.J. Bottomley <JBottomley@parallels.com> Cc: James E.J. Bottomley <jejb@parisc-linux.org> Cc: J. Bruce Fields <bfields@fieldses.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Laura Abbott <lauraa@codeaurora.org> Cc: Liang Zhen <liang.zhen@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Masaru Nomura <massa.nomura@gmail.com> Cc: Michael Opdenacker <michael.opdenacker@free-electrons.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Neil Brown <neilb@suse.de> Cc: Oleg Drokin <green@linuxhacker.ru> Cc: Peng Tao <bergwolf@gmail.com> Cc: Richard Weinberger <richard@nod.at> Cc: Robert Love <robert.w.love@intel.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Trond Myklebust <trond.myklebust@primarydata.com> Cc: Ursula Braun <ursula.braun@de.ibm.com> Cc: Zi Shen Lim <zlim.lnx@gmail.com> Cc: devel@driverdev.osuosl.org Cc: dm-devel@redhat.com Cc: dri-devel@lists.freedesktop.org Cc: fcoe-devel@open-fcoe.org Cc: jfs-discussion@lists.sourceforge.net Cc: linux390@de.ibm.com Cc: linux-afs@lists.infradead.org Cc: linux-cris-kernel@axis.com Cc: linux-kernel@vger.kernel.org Cc: linux-nfs@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linux-raid@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: linux-scsi@vger.kernel.org Cc: qla2xxx-upstream@qlogic.com Cc: user-mode-linux-devel@lists.sourceforge.net Cc: user-mode-linux-user@lists.sourceforge.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-05-07Merge branch 'sched/urgent' into sched/core, to avoid conflictsIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-18sched, treewide: Replace hardcoded nice values with MIN_NICE/MAX_NICEDongsheng Yang
Replace various -20/+19 hardcoded nice values with MIN_NICE/MAX_NICE. Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/ff13819fd09b7a5dba5ab5ae797f2e7019bdfa17.1394532288.git.yangds.fnst@cn.fujitsu.com Cc: devel@driverdev.osuosl.org Cc: devicetree@vger.kernel.org Cc: fcoe-devel@open-fcoe.org Cc: linux390@de.ibm.com Cc: linux-kernel@vger.kernel.org Cc: linux-mm@kvack.org Cc: linux-s390@vger.kernel.org Cc: linux-scsi@vger.kernel.org Cc: nbd-general@lists.sourceforge.net Cc: ocfs2-devel@oss.oracle.com Cc: openipmi-developer@lists.sourceforge.net Cc: qla2xxx-upstream@qlogic.com Cc: linux-arch@vger.kernel.org [ Consolidated the patches, twiddled the changelog. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-03-20scsi, fcoe: Fix CPU hotplug callback registrationSrivatsa S. Bhat
Subsystems that want to register CPU hotplug callbacks, as well as perform initialization for the CPUs that are already online, often do it as shown below: get_online_cpus(); for_each_online_cpu(cpu) init_cpu(cpu); register_cpu_notifier(&foobar_cpu_notifier); put_online_cpus(); This is wrong, since it is prone to ABBA deadlocks involving the cpu_add_remove_lock and the cpu_hotplug.lock (when running concurrently with CPU hotplug operations). Instead, the correct and race-free way of performing the callback registration is: cpu_notifier_register_begin(); for_each_online_cpu(cpu) init_cpu(cpu); /* Note the use of the double underscored version of the API */ __register_cpu_notifier(&foobar_cpu_notifier); cpu_notifier_register_done(); Fix the fcoe code in scsi by using this latter form of callback registration. Cc: Robert Love <robert.w.love@intel.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-11-14Merge tag 'scsi-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull first round of SCSI updates from James Bottomley: "This patch set is driver updates for qla4xxx, scsi_debug, pm80xx, fcoe/libfc, eas2r, lpfc, be2iscsi and megaraid_sas plus some assorted bug fixes and cleanups" * tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (106 commits) [SCSI] scsi_error: Escalate to LUN reset if abort fails [SCSI] Add 'eh_deadline' to limit SCSI EH runtime [SCSI] remove check for 'resetting' [SCSI] dc395: Move 'last_reset' into internal host structure [SCSI] tmscsim: Move 'last_reset' into host structure [SCSI] advansys: Remove 'last_reset' references [SCSI] dpt_i2o: return SCSI_MLQUEUE_HOST_BUSY when in reset [SCSI] dpt_i2o: Remove DPTI_STATE_IOCTL [SCSI] megaraid_sas: Fix synchronization problem between sysPD IO path and AEN path [SCSI] lpfc: Fix typo on NULL assignment [SCSI] scsi_dh_alua: ALUA handler attach should succeed while TPG is transitioning [SCSI] scsi_dh_alua: ALUA check sense should retry device internal reset unit attention [SCSI] esas2r: Cleanup snprinf formatting of firmware version [SCSI] esas2r: Remove superfluous mask of pcie_cap_reg [SCSI] esas2r: Fixes for big-endian platforms [SCSI] esas2r: Directly call kernel functions for atomic bit operations [SCSI] lpfc 8.3.43: Update lpfc version to driver version 8.3.43 [SCSI] lpfc 8.3.43: Fixed not processing task management IOCB response status [SCSI] lpfc 8.3.43: Fixed spinlock hang. [SCSI] lpfc 8.3.43: Fixed invalid Total_Data_Placed value received for els and ct command responses ...
2013-10-14scsi: Convert uses of compare_ether_addr to ether_addr_equalJoe Perches
Preliminary to removing compare_ether_addr altogether: Use the new bool function ether_addr_equal to add some clarity and reduce the likelihood for misuse of compare_ether_addr for sorting. Done via cocci script: $ cat compare_ether_addr.cocci @@ expression a,b; @@ - !compare_ether_addr(a, b) + ether_addr_equal(a, b) @@ expression a,b; @@ - compare_ether_addr(a, b) + !ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) == 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) != 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) == 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) != 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !!ether_addr_equal(a, b) + ether_addr_equal(a, b) Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
2013-10-14fcoe: Fix missing mutex_unlock in fcoe_sysfs_fcf_add error pathNeil Horman
In this pending patch: http://patchwork.open-fcoe.org/patch/104/ Tomas Henzl noted that the error path when fcoe_fcf_device_add fails, was missing a mutex_unlock call. Not sure what staet the integration of the above patch is in, but if you could either merge this with it, or apply it on top of what you already have, that would be great. Thanks! Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: thenzl@redhat.com Reported-by: thenzl@redhat.com Signed-off-by: Robert Love <robert.w.love@intel.com>
2013-10-11libfcoe: Make fcoe_sysfs optional / fix fnic NULL exceptionRobert Love
fnic doesn't use any of the create/destroy/enable/disable interfaces either from the (legacy) module paramaters or the (new) fcoe_sysfs interfaces. When fcoe_sysfs was introduced fnic wasn't changed since it wasn't using the interfaces. libfcoe incorrectly assumed that that all of its users were using fcoe_sysfs and when adding and deleting FCFs would assume the existance of a fcoe_ctlr_device. fnic was not allocating this structure because it doesn't care about the standard user interfaces (fnic starts on link only). If/When libfcoe tried to use the fcoe_ctlr_device's lock for the first time a NULL pointer exception would be triggered. Since fnic doesn't care about sysfs or user interfaces, the solution is to drop libfcoe's assumption that all drivers are using fcoe_sysfs. This patch accomplishes this by changing some of the structure relationships. We need a way to determine when a LLD is using fcoe_sysfs or not and we can do that by checking for the existance of the fcoe_ctlr_device. Prior to this patch, it was assumed that the fcoe_ctlr structure was allocated with the fcoe_ctlr_device and immediately followed it in memory. To reach the fcoe_ctlr_device we would simply go back in memory from the fcoe_ctlr to get the fcoe_ctlr_device. Since fnic doesn't allocate the fcoe_ctlr_device, we cannot keep that assumption. This patch adds a pointer from the fcoe_ctlr to the fcoe_ctlr_device. For bnx2fc and fcoe we will continue to allocate the two structures together, but then we'll set the ctlr->cdev pointer to point at the fcoe_ctlr_device. fnic will not change and will continue to allocate the fcoe_ctlr itself, and ctlr->cdev will remain NULL. When libfcoe adds fcoe_fcf's to the fcoe_ctlr it will check if ctlr->cdev is set and only if so will it continue to interact with fcoe_sysfs. Signed-off-by: Robert Love <robert.w.love@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Tested-by: Hiral Patel <hiralpat@cisco.com>
2013-09-26scsi: fcoe: fix build errorGreg Kroah-Hartman
I had a typo in a variable name for the previous patch (SCSI: fcoe: convert bus code to use bus_group) that broke the build, this fixes that. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26SCSI: fcoe: convert bus code to use bus_groupsGreg Kroah-Hartman
The bus_attrs field of struct bus_type is going away soon, dev_groups should be used instead. This converts the fcoe bus code to use the correct field. Cc: Robert Love <robert.w.love@intel.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-04fcoe: Reduce fcoe_sysfs_fcf_add() stack usageBart Van Assche
This patch fixes the following compiler warning: drivers/scsi/fcoe/fcoe_ctlr.c: In function fcoe_sysfs_fcf_add: drivers/scsi/fcoe/fcoe_ctlr.c:211:1: warning: the frame size of 1480 bytes is larger than 1024 bytes [-Wframe-larger-than=] Signed-off-by: Bart Van Assche <bvanassche@acm.org> Cc: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
2013-09-04fcoe: Add missing newlines in debug messagesBart Van Assche
FCoE debug statements must end in a newline. Add one where it is missing. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Cc: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
2013-09-04fcoe: Declare fcoe_ctlr_mode_set() staticBart Van Assche
The function fcoe_ctlr_mode_set() is local, hence declare it static. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Cc: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
2013-09-04fcoe: cleanup return codes from fcoe_rcvNeil Horman
the return codes from fcoe_rcv should be NET_RX_*, not 0 or -1. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
2013-09-04fcoe: make sure fcoe frames are unshared prior to manipulating themNeil Horman
Based on my last patch I noticed that fcoe_rcv has a simmilar problem, in that it manipulates the passed in skb without checking to see if it has other users. Making manipulations to a shared skb can result in various corruptions. Easy fix, just make sure the skb is unshared prior to doing anything with it. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
2013-09-04fcoe: ensure that skb placed on the fip_recv_list are unsharedNeil Horman
Recently had this Oops reported to me on the 3.10 kernel: [ 807.554955] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 [ 807.562799] IP: [<ffffffff814e6fc7>] skb_dequeue+0x47/0x70 [ 807.568296] PGD 20c889067 PUD 20c8b8067 PMD 0 [ 807.572769] Oops: 0002 [#1] SMP [ 807.655597] Hardware name: Dell Inc. PowerEdge R415/0DDT2D, BIOS 1.8.6 12/06/2011 [ 807.663079] Workqueue: events fcoe_ctlr_recv_work [libfcoe] [ 807.668656] task: ffff88020b42a160 ti: ffff88020ae6c000 task.ti: ffff88020ae6c000 [ 807.676126] RIP: 0010:[<ffffffff814e6fc7>] [<ffffffff814e6fc7>] skb_dequeue+0x47/0x70 [ 807.684046] RSP: 0000:ffff88020ae6dd70 EFLAGS: 00010097 [ 807.689349] RAX: 0000000000000246 RBX: ffff8801d04d6700 RCX: 0000000000000000 [ 807.696474] RDX: 0000000000000000 RSI: 0000000000000246 RDI: ffff88020df26434 [ 807.703598] RBP: ffff88020ae6dd88 R08: 00000000000173e0 R09: ffff880216e173e0 [ 807.710723] R10: ffffffff814e5897 R11: ffffea0007413580 R12: ffff88020df26420 [ 807.717847] R13: ffff88020df26434 R14: 0000000000000004 R15: ffff8801d04c42ce [ 807.724972] FS: 00007fdaab6048c0(0000) GS:ffff880216e00000(0000) knlGS:0000000000000000 [ 807.733049] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 807.738785] CR2: 0000000000000008 CR3: 000000020cbc9000 CR4: 00000000000006f0 [ 807.745910] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 807.753033] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 807.760156] Stack: [ 807.762162] ffff8801d04d6700 0000000000000001 ffff88020df26400 ffff88020ae6de20 [ 807.769586] ffffffffa0444409 ffff88020b046a00 ffff88020ae6dde8 ffffffff810105be [ 807.777008] ffff88020b42a868 0000000000000000 ffff88020df264a8 ffff88020df26348 [ 807.784431] Call Trace: [ 807.786885] [<ffffffffa0444409>] fcoe_ctlr_recv_work+0x59/0x9a0 [libfcoe] [ 807.793755] [<ffffffff810105be>] ? __switch_to+0x13e/0x4a0 [ 807.799324] [<ffffffff8107d0e6>] process_one_work+0x176/0x420 [ 807.805151] [<ffffffff8107dd0b>] worker_thread+0x11b/0x3a0 [ 807.810717] [<ffffffff8107dbf0>] ? rescuer_thread+0x350/0x350 [ 807.816545] [<ffffffff810842b0>] kthread+0xc0/0xd0 [ 807.821416] [<ffffffff810841f0>] ? insert_kthread_work+0x40/0x40 [ 807.827503] [<ffffffff8160ce2c>] ret_from_fork+0x7c/0xb0 [ 807.832897] [<ffffffff810841f0>] ? insert_kthread_work+0x40/0x40 [ 807.858500] RIP [<ffffffff814e6fc7>] skb_dequeue+0x47/0x70 [ 807.864076] RSP <ffff88020ae6dd70> [ 807.867558] CR2: 0000000000000008 Looks like the root cause is the fact that the packet recieve function fcoe_ctlr_recv enqueues the skb to a sk_buff_head_list prior to ensuring that the skb is unshared. This can happen when multiple packet listeners recieve an skb, as the deliver_skb function just increments skb->users for each handler. As a result, having multiple users of a single skb results in multiple manipulators of its methods, implying list corruption, and the oops recorded above. The fix is pretty easy, just make sure that we clone the skb if its got multiple users with the skb_share_check function, like other protocols do. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
2013-07-13Merge tag 'scsi-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull final round of SCSI updates from James Bottomley: "This is the remaining set of SCSI patches for the merge window. It's mostly driver updates (scsi_debug, qla2xxx, storvsc, mp3sas). There are also several bug fixes in fcoe, libfc, and megaraid_sas. We also have a couple of core changes to try to make device destruction more deterministic" * tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (46 commits) [SCSI] scsi constants: command, sense key + additional sense strings fcoe: Reduce number of sparse warnings fcoe: Stop fc_rport_priv structure leak libfcoe: Fix meaningless log statement libfc: Differentiate echange timer cancellation debug statements libfc: Remove extra space in fc_exch_timer_cancel definition fcoe: fix the link error status block sparse warnings fcoe: Fix smatch warning in fcoe_fdmi_info function libfc: Reject PLOGI from nodes with incompatible role [SCSI] enable destruction of blocked devices which fail LUN scanning [SCSI] Fix race between starved list and device removal [SCSI] megaraid_sas: fix a bug for 64 bit arches [SCSI] scsi_debug: reduce duplication between prot_verify_read and prot_verify_write [SCSI] scsi_debug: simplify offset calculation for dif_storep [SCSI] scsi_debug: invalidate protection info for unmapped region [SCSI] scsi_debug: fix NULL pointer dereference with parameters dif=0 dix=1 [SCSI] scsi_debug: fix incorrectly nested kmap_atomic() [SCSI] scsi_debug: fix invalid address passed to kunmap_atomic() [SCSI] mpt3sas: Bump driver version to v02.100.00.00 [SCSI] mpt3sas: when async scanning is enabled then while scanning, devices are removed but their transport layer entries are not removed ...
2013-07-09fcoe: Reduce number of sparse warningsBart Van Assche
Declare local variables and functions 'static'. This patch does not change any functionality. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Robert Love <robert.w.love@intel.com>
2013-07-09fcoe: Stop fc_rport_priv structure leakMark Rustad
When repeatedly doing rmmod and modprobe on the ixgbe driver while FCoE is active in a VN2VN configuration, memory leaks would be discovered by kmemleak with the following backtrace: unreferenced object 0xffff88003d076000 (size 1024): comm "kworker/0:3", pid 2998, jiffies 4295436448 (age 1015.332s) hex dump (first 32 bytes): 48 8a fe 6f 00 88 ff ff 00 00 00 00 00 00 00 00 H..o............ 01 00 00 00 02 00 00 00 7b ac 87 21 1b 00 00 10 ........{..!.... backtrace: [<ffffffff814b308b>] kmemleak_alloc+0x5b/0xc0 [<ffffffff8115c6e8>] __kmalloc+0xd8/0x1b0 [<ffffffffa0216638>] fc_rport_create+0x48/0x1f0 [libfc] [<ffffffffa023cd86>] fcoe_ctlr_vn_add.isra.10+0x56/0x1a0 [libfcoe] [<ffffffffa023f440>] fcoe_ctlr_vn_recv+0x8b0/0xab0 [libfcoe] [<ffffffffa023fb06>] fcoe_ctlr_recv_work+0x4c6/0xf60 [libfcoe] [<ffffffff81067404>] process_one_work+0x1e4/0x4d0 [<ffffffff81068def>] worker_thread+0x10f/0x380 [<ffffffff8107019a>] kthread+0xea/0xf0 [<ffffffff814d32ec>] ret_from_fork+0x7c/0xb0 [<ffffffffffffffff>] 0xffffffffffffffff This patch stops the leak of the fc_rport_priv structure. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Jack Morgan <jack.morgan@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
2013-07-09libfcoe: Fix meaningless log statementRobert Love
ctlr_dev was initialized to NULL, and never re-assigned. This caused the log statement to always report failure. This patch removes the unused variable and fixes the log statement to always report 'success', as that is what should be logged if the code reaches this point. Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Jack Morgan <jack.morgan@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com>
2013-07-09fcoe: fix the link error status block sparse warningsYi Zou
Both fcoe_fc_els_lesb and fc_els_lesb are in __be32 already, and both are exactly the same size in bytes, with somewhat different member names to reflect the fact the former is for Ethernet media the latter is for Fiber Channel, so, remove conversion and use __be32 directly. This fixes the warning from sparse check. Signed-off-by: Yi Zou <yi.zou@intel.com> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Tested-by: Jack Morgan <jack.morgan@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
2013-07-09fcoe: Fix smatch warning in fcoe_fdmi_info functionNeerav Parikh
This patch fixes a smatch warning as below: smatch warnings: drivers/scsi/fcoe/fcoe.c:782 fcoe_fdmi_info() warn: 'fdmi' puts 896 bytes on stack Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Neerav Parikh <Neerav.Parikh@intel.com> Tested-by: Jack Morgan <jack.morgan@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
2013-07-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/freescale/fec_main.c drivers/net/ethernet/renesas/sh_eth.c net/ipv4/gre.c The GRE conflict is between a bug fix (kfree_skb --> kfree_skb_list) and the splitting of the gre.c code into seperate files. The FEC conflict was two sets of changes adding ethtool support code in an "!CONFIG_M5272" CPP protected block. Finally the sh_eth.c conflict was between one commit add bits set in the .eesr_err_check mask whilst another commit removed the .tx_error_check member and assignments. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-26Merge tag 'fcoe1' into fixesJames Bottomley
This patch fixes a critical bug that was introduced in 3.9 related to VLAN tagging FCoE frames.
2013-06-26Merge tag 'fcoe' into fixesJames Bottomley
3.10 fixes
2013-06-25fcoe: Use correct API to set vlan tag for FCoE Ethertype skbsRobert Love
fcoe_xmit was coded such that it would skip the vlan net device/layer and instead set some vlan flags and transmit on the real net device. The real net device has code that would add the vlan tag for fcoe skbs. This avoids some extra processing for data frames and provides a small performance improvement. Since fcoe_xmit was not using the vlan net device, __vlan_put_tag within the real net device's xmit routine was ultimately being called to set the vlan tag. With the below change the behavior of __vlan_put_tag changed slightly, it now sets the skb->protocol = vlan_proto. vlan_proto was not a field being set by fcoe_xmit, so the skb->protocol is now not being set to ETH_P_8021Q, as it should be. This patch converts fcoe_xmit to use the vlan_put_tag routine which will tag the skb and fcoe will continue to transmit fcoe skbs on the real net device. For reference, the below change was the one that altered the __vlan_put_tag behavior. commit 86a9bad3ab6b6f858fd4443b48738cabbb6d094c Author: Patrick McHardy <kaber@trash.net> Date: Fri Apr 19 02:04:30 2013 +0000 net: vlan: add protocol argument to packet tagging functions Add a protocol argument to the VLAN packet tagging functions. In case of HW tagging, we need that protocol available in the ndo_start_xmit functions, so it is stored in a new field in the skb. The new field fits into a hole (on 64 bit) and doesn't increase the sks's size. Signed-off-by: Robert Love <robert.w.love@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: John Fastabend <john.r.fastabend@intel.com>
2013-05-28net: pass info struct via netdevice notifierJiri Pirko
So far, only net_device * could be passed along with netdevice notifier event. This patch provides a possibility to pass custom structure able to provide info that event listener needs to know. Signed-off-by: Jiri Pirko <jiri@resnulli.us> v2->v3: fix typo on simeth shortened dev_getter shortened notifier_info struct name v1->v2: fix notifier_call parameter in call_netdevice_notifier() Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-10libfcoe: Fix Conflicting FCFs issue in the fabricKrishna Mohan
When multiple FCFs in use, and first FIP Advertisement received is with "Available for Login" i.e A bit set to 0, FCF selection will fail. The fix is to remove the assumption in the code that first FCF is only allowed selectable FCF. Consider the scenario fip->fcfs contains FCF1(fabricname X, marked A=0) FCF2(fabricname Y, marked A=1). list_first_entry(first) points to FCF1 and 1st iteration we ignore the FCF and on 2nd iteration we compare FCF1 & FCF2 fabric name and we fails to perform FCF selection. Signed-off-by: Krishna Mohan <krmohan@cisco.com> Reviewed-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
2013-05-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Highlights (1721 non-merge commits, this has to be a record of some sort): 1) Add 'random' mode to team driver, from Jiri Pirko and Eric Dumazet. 2) Make it so that any driver that supports configuration of multiple MAC addresses can provide the forwarding database add and del calls by providing a default implementation and hooking that up if the driver doesn't have an explicit set of handlers. From Vlad Yasevich. 3) Support GSO segmentation over tunnels and other encapsulating devices such as VXLAN, from Pravin B Shelar. 4) Support L2 GRE tunnels in the flow dissector, from Michael Dalton. 5) Implement Tail Loss Probe (TLP) detection in TCP, from Nandita Dukkipati. 6) In the PHY layer, allow supporting wake-on-lan in situations where the PHY registers have to be written for it to be configured. Use it to support wake-on-lan in mv643xx_eth. From Michael Stapelberg. 7) Significantly improve firewire IPV6 support, from YOSHIFUJI Hideaki. 8) Allow multiple packets to be sent in a single transmission using network coding in batman-adv, from Martin Hundebøll. 9) Add support for T5 cxgb4 chips, from Santosh Rastapur. 10) Generalize the VXLAN forwarding tables so that there is more flexibility in configurating various aspects of the endpoints. From David Stevens. 11) Support RSS and TSO in hardware over GRE tunnels in bxn2x driver, from Dmitry Kravkov. 12) Zero copy support in nfnelink_queue, from Eric Dumazet and Pablo Neira Ayuso. 13) Start adding networking selftests. 14) In situations of overload on the same AF_PACKET fanout socket, or per-cpu packet receive queue, minimize drop by distributing the load to other cpus/fanouts. From Willem de Bruijn and Eric Dumazet. 15) Add support for new payload offset BPF instruction, from Daniel Borkmann. 16) Convert several drivers over to mdoule_platform_driver(), from Sachin Kamat. 17) Provide a minimal BPF JIT image disassembler userspace tool, from Daniel Borkmann. 18) Rewrite F-RTO implementation in TCP to match the final specification of it in RFC4138 and RFC5682. From Yuchung Cheng. 19) Provide netlink socket diag of netlink sockets ("Yo dawg, I hear you like netlink, so I implemented netlink dumping of netlink sockets.") From Andrey Vagin. 20) Remove ugly passing of rtnetlink attributes into rtnl_doit functions, from Thomas Graf. 21) Allow userspace to be able to see if a configuration change occurs in the middle of an address or device list dump, from Nicolas Dichtel. 22) Support RFC3168 ECN protection for ipv6 fragments, from Hannes Frederic Sowa. 23) Increase accuracy of packet length used by packet scheduler, from Jason Wang. 24) Beginning set of changes to make ipv4/ipv6 fragment handling more scalable and less susceptible to overload and locking contention, from Jesper Dangaard Brouer. 25) Get rid of using non-type-safe NLMSG_* macros and use nlmsg_*() instead. From Hong Zhiguo. 26) Optimize route usage in IPVS by avoiding reference counting where possible, from Julian Anastasov. 27) Convert IPVS schedulers to RCU, also from Julian Anastasov. 28) Support cpu fanouts in xt_NFQUEUE netfilter target, from Holger Eitzenberger. 29) Network namespace support for nf_log, ebt_log, xt_LOG, ipt_ULOG, nfnetlink_log, and nfnetlink_queue. From Gao feng. 30) Implement RFC3168 ECN protection, from Hannes Frederic Sowa. 31) Support several new r8169 chips, from Hayes Wang. 32) Support tokenized interface identifiers in ipv6, from Daniel Borkmann. 33) Use usbnet_link_change() helper in USB net driver, from Ming Lei. 34) Add 802.1ad vlan offload support, from Patrick McHardy. 35) Support mmap() based netlink communication, also from Patrick McHardy. 36) Support HW timestamping in mlx4 driver, from Amir Vadai. 37) Rationalize AF_PACKET packet timestamping when transmitting, from Willem de Bruijn and Daniel Borkmann. 38) Bring parity to what's provided by /proc/net/packet socket dumping and the info provided by netlink socket dumping of AF_PACKET sockets. From Nicolas Dichtel. 39) Fix peeking beyond zero sized SKBs in AF_UNIX, from Benjamin Poirier" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1722 commits) filter: fix va_list build error af_unix: fix a fatal race with bit fields bnx2x: Prevent memory leak when cnic is absent bnx2x: correct reading of speed capabilities net: sctp: attribute printl with __printf for gcc fmt checks netlink: kconfig: move mmap i/o into netlink kconfig netpoll: convert mutex into a semaphore netlink: Fix skb ref counting. net_sched: act_ipt forward compat with xtables mlx4_en: fix a build error on 32bit arches Revert "bnx2x: allow nvram test to run when device is down" bridge: avoid OOPS if root port not found drivers: net: cpsw: fix kernel warn on cpsw irq enable sh_eth: use random MAC address if no valid one supplied 3c509.c: call SET_NETDEV_DEV for all device types (ISA/ISAPnP/EISA) tg3: fix to append hardware time stamping flags unix/stream: fix peeking with an offset larger than data in queue unix/dgram: fix peeking with an offset larger than data in queue unix/dgram: peek beyond 0-sized skbs openvswitch: Remove unneeded ovs_netdev_get_ifindex() ...
2013-04-29scsi: rename random32() to prandom_u32()Akinobu Mita
Use preferable function name which implies using a pseudo-random number generator. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Robert Love <robert.w.love@intel.com> Cc: James Smart <james.smart@emulex.com> Cc: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-19net: vlan: rename NETIF_F_HW_VLAN_* feature flags to NETIF_F_HW_VLAN_CTAG_*Patrick McHardy
Rename the hardware VLAN acceleration features to include "CTAG" to indicate that they only support CTAGs. Follow up patches will introduce 802.1ad server provider tagging (STAGs) and require the distinction for hardware not supporting acclerating both. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-25libfcoe: Fix fcoe_sysfs VN2VN modeRobert Love
The libfc discovery layer is being initialized in the 'create' paths for both legacy libfcoe module parameters and fcoe_sysfs control interfaces. The problem is that for VN2VN mode the discovery layer is initialized as if it were in 'fabric' mode and it is not re-configured when the mode is changed to 'vn2vn'. This patch splits out code that needs to be initialized once and code that can, and should be, re-configured when the mode changes. Additionally this patch makes that change so that the discovery layer can be reconfigured to the libfcoe implementation when in 'vn2vn' mode. Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Jack Morgan <jack.morgan@intel.com> Reviewed-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
2013-03-25libfc, fcoe, bnx2fc: Split fc_disc_init into fc_disc_{init, config}Robert Love
Split discovery initialization in code that is setup once (fcoe_disc_init) and code that can be re-configured (fcoe_disc_config). Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Jack Morgan <jack.morgan@intel.com> Reviewed-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
2013-03-25libfc, fcoe, bnx2fc: Always use fcoe_disc_init for discovery layer ↵Robert Love
initialization Currently libfcoe is doing some libfc discovery layer initialization outside of libfc. This patch moves this code into libfc and sets up a split in discovery (one time) initialization code and (re-configurable) settings that will come in the next patch. Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Jack Morgan <jack.morgan@intel.com> Reviewed-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
2013-03-25fcoe: Fix deadlock between create and destroy pathsRobert Love
We can deadlock (s_active and fcoe_config_mutex) if a port is being destroyed at the same time one is being created. [ 4200.503113] ====================================================== [ 4200.503114] [ INFO: possible circular locking dependency detected ] [ 4200.503116] 3.8.0-rc5+ #8 Not tainted [ 4200.503117] ------------------------------------------------------- [ 4200.503118] kworker/3:2/2492 is trying to acquire lock: [ 4200.503119] (s_active#292){++++.+}, at: [<ffffffff8122d20b>] sysfs_addrm_finish+0x3b/0x70 [ 4200.503127] but task is already holding lock: [ 4200.503128] (fcoe_config_mutex){+.+.+.}, at: [<ffffffffa02f3338>] fcoe_destroy_work+0xe8/0x120 [fcoe] [ 4200.503133] which lock already depends on the new lock. [ 4200.503135] the existing dependency chain (in reverse order) is: [ 4200.503136] -> #1 (fcoe_config_mutex){+.+.+.}: [ 4200.503139] [<ffffffff810c7711>] lock_acquire+0xa1/0x140 [ 4200.503143] [<ffffffff816ca7be>] mutex_lock_nested+0x6e/0x360 [ 4200.503146] [<ffffffffa02f11bd>] fcoe_enable+0x1d/0xb0 [fcoe] [ 4200.503148] [<ffffffffa02f127d>] fcoe_ctlr_enabled+0x2d/0x50 [fcoe] [ 4200.503151] [<ffffffffa02ffbe8>] store_ctlr_enabled+0x38/0x90 [libfcoe] [ 4200.503154] [<ffffffff81424878>] dev_attr_store+0x18/0x30 [ 4200.503157] [<ffffffff8122b750>] sysfs_write_file+0xe0/0x150 [ 4200.503160] [<ffffffff811b334c>] vfs_write+0xac/0x180 [ 4200.503162] [<ffffffff811b3692>] sys_write+0x52/0xa0 [ 4200.503164] [<ffffffff816d7159>] system_call_fastpath+0x16/0x1b [ 4200.503167] -> #0 (s_active#292){++++.+}: [ 4200.503170] [<ffffffff810c680f>] __lock_acquire+0x135f/0x1c90 [ 4200.503172] [<ffffffff810c7711>] lock_acquire+0xa1/0x140 [ 4200.503174] [<ffffffff8122c626>] sysfs_deactivate+0x116/0x160 [ 4200.503176] [<ffffffff8122d20b>] sysfs_addrm_finish+0x3b/0x70 [ 4200.503178] [<ffffffff8122b2eb>] sysfs_hash_and_remove+0x5b/0xb0 [ 4200.503180] [<ffffffff8122f3d1>] sysfs_remove_group+0x61/0x100 [ 4200.503183] [<ffffffff814251eb>] device_remove_groups+0x3b/0x60 [ 4200.503185] [<ffffffff81425534>] device_remove_attrs+0x44/0x80 [ 4200.503187] [<ffffffff81425e97>] device_del+0x127/0x1c0 [ 4200.503189] [<ffffffff81425f52>] device_unregister+0x22/0x60 [ 4200.503191] [<ffffffffa0300970>] fcoe_ctlr_device_delete+0xe0/0xf0 [libfcoe] [ 4200.503194] [<ffffffffa02f1b5c>] fcoe_interface_cleanup+0x6c/0xa0 [fcoe] [ 4200.503196] [<ffffffffa02f3355>] fcoe_destroy_work+0x105/0x120 [fcoe] [ 4200.503198] [<ffffffff8107ee91>] process_one_work+0x1a1/0x580 [ 4200.503203] [<ffffffff81080c6e>] worker_thread+0x15e/0x440 [ 4200.503205] [<ffffffff8108715a>] kthread+0xea/0xf0 [ 4200.503207] [<ffffffff816d70ac>] ret_from_fork+0x7c/0xb0 [ 4200.503209] other info that might help us debug this: [ 4200.503211] Possible unsafe locking scenario: [ 4200.503212] CPU0 CPU1 [ 4200.503213] ---- ---- [ 4200.503214] lock(fcoe_config_mutex); [ 4200.503215] lock(s_active#292); [ 4200.503218] lock(fcoe_config_mutex); [ 4200.503219] lock(s_active#292); [ 4200.503221] *** DEADLOCK *** [ 4200.503223] 3 locks held by kworker/3:2/2492: [ 4200.503224] #0: (fcoe){.+.+.+}, at: [<ffffffff8107ee2b>] process_one_work+0x13b/0x580 [ 4200.503228] #1: ((&port->destroy_work)){+.+.+.}, at: [<ffffffff8107ee2b>] process_one_work+0x13b/0x580 [ 4200.503232] #2: (fcoe_config_mutex){+.+.+.}, at: [<ffffffffa02f3338>] fcoe_destroy_work+0xe8/0x120 [fcoe] [ 4200.503236] stack backtrace: [ 4200.503238] Pid: 2492, comm: kworker/3:2 Not tainted 3.8.0-rc5+ #8 [ 4200.503240] Call Trace: [ 4200.503243] [<ffffffff816c2f09>] print_circular_bug+0x1fb/0x20c [ 4200.503246] [<ffffffff810c680f>] __lock_acquire+0x135f/0x1c90 [ 4200.503248] [<ffffffff810c463a>] ? debug_check_no_locks_freed+0x9a/0x180 [ 4200.503250] [<ffffffff810c7711>] lock_acquire+0xa1/0x140 [ 4200.503253] [<ffffffff8122d20b>] ? sysfs_addrm_finish+0x3b/0x70 [ 4200.503255] [<ffffffff8122c626>] sysfs_deactivate+0x116/0x160 [ 4200.503258] [<ffffffff8122d20b>] ? sysfs_addrm_finish+0x3b/0x70 [ 4200.503260] [<ffffffff8122d20b>] sysfs_addrm_finish+0x3b/0x70 [ 4200.503262] [<ffffffff8122b2eb>] sysfs_hash_and_remove+0x5b/0xb0 [ 4200.503265] [<ffffffff8122f3d1>] sysfs_remove_group+0x61/0x100 [ 4200.503273] [<ffffffff814251eb>] device_remove_groups+0x3b/0x60 [ 4200.503275] [<ffffffff81425534>] device_remove_attrs+0x44/0x80 [ 4200.503277] [<ffffffff81425e97>] device_del+0x127/0x1c0 [ 4200.503279] [<ffffffff81425f52>] device_unregister+0x22/0x60 [ 4200.503282] [<ffffffffa0300970>] fcoe_ctlr_device_delete+0xe0/0xf0 [libfcoe] [ 4200.503285] [<ffffffffa02f1b5c>] fcoe_interface_cleanup+0x6c/0xa0 [fcoe] [ 4200.503287] [<ffffffffa02f3355>] fcoe_destroy_work+0x105/0x120 [fcoe] [ 4200.503290] [<ffffffff8107ee91>] process_one_work+0x1a1/0x580 [ 4200.503292] [<ffffffff8107ee2b>] ? process_one_work+0x13b/0x580 [ 4200.503295] [<ffffffffa02f3250>] ? fcoe_if_destroy+0x230/0x230 [fcoe] [ 4200.503297] [<ffffffff81080c6e>] worker_thread+0x15e/0x440 [ 4200.503299] [<ffffffff81080b10>] ? busy_worker_rebind_fn+0x100/0x100 [ 4200.503301] [<ffffffff8108715a>] kthread+0xea/0xf0 [ 4200.503304] [<ffffffff81087070>] ? kthread_create_on_node+0x160/0x160 [ 4200.503306] [<ffffffff816d70ac>] ret_from_fork+0x7c/0xb0 [ 4200.503308] [<ffffffff81087070>] ? kthread_create_on_node+0x160/0x160 Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Jack Morgan <jack.morgan@intel.com>
2013-03-01[SCSI] Merge tag 'fcoe-02-19-13' into for-linusJames Bottomley
FCoE Updates for 3.9 Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-19libfcoe: Check for unusable FCFs before looking for conflicting FCFsBhanu Prakash Gollapudi
When there are multiple FCFs in the fabric, and one of them becomes unavailable, the fabric name for the unavailable FCF becomes 0 along with FIP_FL_AVAIL getting reset. In this case, FCF selection logic does not select any FCF as it first checks for conflicting FCFs (since fabric name is 0, it fails the condition), instead of first checking if it is usable or not. Fix it by first checking if FCF is usable and skip that FCF, and go to the next one in the list to check if it can be selected. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
2013-02-11libfcoe: Handle CVL while waiting to select an FCFBhanu Prakash Gollapudi
When a CVL is received while we wait to select best FCF, we drop it without handling it. This causes initiator and the switch to go out-of-sync. Initiator proceeds selecting one of the FCFs and tries to send FIP FLOGI. However the switch may reject the FLOGI, as it has cleared its internal state, and expects the initiator to start FIP discovery protocol. Fix this condition by resetting the fcoe controller. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Reviewed-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
2013-01-28fcoe: Fix deadlock while deleting FCoE interface with NPIV portsNeerav Parikh
This patch fixes following deadlock caused by destroying of an FCoE interface with active NPIV ports on that interface. Call Trace: [<ffffffff814b7e88>] schedule+0x64/0x66 [<ffffffff814b6b4f>] schedule_timeout+0x36/0xe3 [<ffffffff81070c55>] ? update_curr+0xd6/0x110 [<ffffffff81071f6b>] ? hrtick_update+0x1b/0x4d [<ffffffff81072405>] ? dequeue_task_fair+0x1ca/0x1d9 [<ffffffff8106a369>] ? need_resched+0x1e/0x28 [<ffffffff814b7d14>] wait_for_common+0x9b/0xf1 [<ffffffff8106e7be>] ? try_to_wake_up+0x1e0/0x1e0 [<ffffffff814b7e22>] wait_for_completion+0x1d/0x1f [<ffffffff8105ae82>] flush_workqueue+0x116/0x2a1 [<ffffffff8105b357>] drain_workqueue+0x66/0x14c [<ffffffff8105b8ef>] destroy_workqueue+0x1a/0xcf [<ffffffffa009211e>] fc_remove_host+0x154/0x17f [scsi_transport_fc] [<ffffffffa00edbb8>] fcoe_if_destroy+0x184/0x1c9 [fcoe] [<ffffffffa00edc28>] fcoe_destroy_work+0x2b/0x44 [fcoe] [<ffffffff8105a82a>] process_one_work+0x1a8/0x2a4 [<ffffffffa00edbfd>] ? fcoe_if_destroy+0x1c9/0x1c9 [fcoe] [<ffffffff8105c396>] worker_thread+0x1db/0x268 [<ffffffff810604a3>] ? wake_up_bit+0x2a/0x2a [<ffffffff8105c1bb>] ? manage_workers.clone.16+0x1f6/0x1f6 [<ffffffff8105ffd6>] kthread+0x6f/0x77 [<ffffffff814c0304>] kernel_thread_helper+0x4/0x10 [<ffffffff8105ff67>] ? kthread_freezable_should_stop+0x4b/0x4b Call Trace: [<ffffffff814b7e88>] schedule+0x64/0x66 [<ffffffff814b8041>] schedule_preempt_disabled+0xe/0x10 [<ffffffff814b70a1>] __mutex_lock_common.clone.5+0x117/0x17a [<ffffffff814b7117>] __mutex_lock_slowpath+0x13/0x15 [<ffffffff814b6f76>] mutex_lock+0x23/0x37 [<ffffffff8125b890>] ? list_del+0x11/0x30 [<ffffffffa00edc84>] fcoe_vport_destroy+0x43/0x5f [fcoe] [<ffffffffa009130a>] fc_vport_terminate+0x48/0x110 [scsi_transport_fc] [<ffffffffa00913ef>] fc_vport_sched_delete+0x1d/0x79 [scsi_transport_fc] [<ffffffff8105a82a>] process_one_work+0x1a8/0x2a4 [<ffffffffa00913d2>] ? fc_vport_terminate+0x110/0x110 [scsi_transport_fc] [<ffffffff8105c396>] worker_thread+0x1db/0x268 [<ffffffff8105c1bb>] ? manage_workers.clone.16+0x1f6/0x1f6 [<ffffffff8105ffd6>] kthread+0x6f/0x77 [<ffffffff814c0304>] kernel_thread_helper+0x4/0x10 [<ffffffff8105ff67>] ? kthread_freezable_should_stop+0x4b/0x4b [<ffffffff814c0300>] ? gs_change+0x13/0x13 A prior attempt to fix this issue is posted here: http://lists.open-fcoe.org/pipermail/devel/2012-October/012318.html or http://article.gmane.org/gmane.linux.scsi.open-fcoe.devel/11924 Based on feedback and discussion with Neil Horman it seems that the above patch may have a case where the fcoe_vport_destroy() and fcoe_destroy_work() can race; hence that patch has been withdrawn with this patch that is trying to solve the same problem in a different way. In the current approach instead of removing the fcoe_config_mutex from the vport_delete callback function; I've chosen to delete all the NPIV ports first on a given root lport before continuing with the removal of the root lport. Signed-off-by: Neerav Parikh <Neerav.Parikh@intel.com> Tested-by: Marcus Dennis <marcusx.e.dennis@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
2013-01-28fcoe: close race on link speed detection in fcoe codeNeil Horman
When creating an fcoe interfce, we call fcoe_link_speed_update before we add the lports fcoe interface to the fc_hostlist. Since network device events like NETDEV_CHANGE are only processed if an fcoe interface is found with an underlying netdev that matches the netdev of the event. Since this processing in fcoe_device_notification is how link_speed changes get communicated to the libfc code (via fcoe_link_speed_update), we have a race condition - if a NETDEV_CHANGE event is sent after the call to fcoe_link_speed_update in fcoe_netdev_config, but before we add the interface to the fc_hostlist, we will loose the event and attributes like /sys/class/fc_host/hostX/speed will not get updated properly. Fix this by moving the add to the fc_hostlist above the serialized call to fcoe_netdev_config, ensuring that we catch netdev envents before we make a direct call to fcoe_link_speed_update. Also use this opportunity to clean up access to the fc_hostlist a bit by creating a fcoe_hostlist_del accessor and replacing the cleanup in fcoe_exit to use it properly. Tested by myself successfully [ Comment over 80 chars broken into multi-line by Robert Love to satisfy checkpatch.pl ] Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reviewed-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
2012-12-17random32: rename random32 to prandomAkinobu Mita
This renames all random32 functions to have 'prandom_' prefix as follows: void prandom_seed(u32 seed); /* rename from srandom32() */ u32 prandom_u32(void); /* rename from random32() */ void prandom_seed_state(struct rnd_state *state, u64 seed); /* rename from prandom32_seed() */ u32 prandom_u32_state(struct rnd_state *state); /* rename from prandom32() */ The purpose of this renaming is to prevent some kernel developers from assuming that prandom32() and random32() might imply that only prandom32() was the one using a pseudo-random number generator by prandom32's "p", and the result may be a very embarassing security exposure. This concern was expressed by Theodore Ts'o. And furthermore, I'm going to introduce new functions for getting the requested number of pseudo-random bytes. If I continue to use both prandom32 and random32 prefixes for these functions, the confusion is getting worse. As a result of this renaming, "prandom_" is the common prefix for pseudo-random number library. Currently, srandom32() and random32() are preserved because it is difficult to rename too many users at once. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Robert Love <robert.w.love@intel.com> Cc: Michel Lespinasse <walken@google.com> Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu> Cc: David Laight <david.laight@aculab.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Artem Bityutskiy <dedekind1@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-14debris left by "[SCSI] libfcoe: Remove mutex_trylock/restart_syscall checks"Al Viro
AFAICS, the situation for fcoe_transport_disable() seems to be the same as for fcoe_transport_enable(). IOW, shouldn't it have restart_syscall() removed as well? I don't see any in-tree ->disable() instances that could return -ERESTARTSYS, anyway... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Robert Love <robert.w.love@intel.com>
2012-12-14libfcoe, fcoe: consolidate the fcoe_ctlr_get_lesb/fcoe_get_lesbYi Zou
Similarly they can be moved into libfcoe instead of being private to fcoe now. Also add comments particularly on the term LESB to the corresponding function. Signed-off-by: Yi Zou <yi.zou@intel.com> Cc: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Tested-by: Marcus Dennis <marcusx.e.dennis@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
2012-12-14libfcoe, fcoe: move fcoe_link_speed_update() to libfcoe and export itYi Zou
With the previous patch, fcoe_link_speed_update() can be moved into libfcoe and exported to used by fcoe, bnx2fc, and etc. Signed-off-by: Yi Zou <yi.zou@intel.com> Cc: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Tested-by: Marcus Dennis <marcusx.e.dennis@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 10:05:18 +0000