summaryrefslogtreecommitdiff
path: root/drivers/scsi/be2iscsi/be_iscsi.c
AgeCommit message (Collapse)Author
2016-02-23be2iscsi: Rename MCC and BMBX processing functionsJitendra Bhivare
beiscsi_mccq_compl -> beiscsi_mccq_compl_wait - indicate blocking call. be_mcc_wait_compl -> be_mcc_compl_poll - indicate polling for completion. be_mbox_db_ready_wait -> be_mbox_db_ready_poll - indicate polling for RDY. be_mcc_compl_process -> beiscsi_process_mbox_compl - indicate BMBX compl. Signed-off-by: Jitendra Bhivare <jitendra.bhivare@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23be2iscsi: Fix async link event processingJitendra Bhivare
Use only port_link_status only to determine link state change. Only bit 0 is used to get the state. Remove code for processing port_fault. Fixed get_nic_conf structure definition. Removed rsvd[23] field in be_cmd_get_nic_conf_resp. Moved definitions of struct field values below the field. Signed-off-by: Jitendra Bhivare <jitendra.bhivare@avagotech.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23be2iscsi: Fix to process 25G link speed info from FWJitendra Bhivare
Async link event provides port_speed info. Cache the port_speed info and use the same to report in ISCSI_HOST_PARAM_PORT_SPEED query. Removed link status query IOCTL used to do the same. Signed-off-by: Jitendra Bhivare <jitendra.bhivare@avagotech.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23be2iscsi: Fix IOPOLL implementationJitendra Bhivare
OS not responding when running 2 port traffic on 72 CPUs system. be2iscsi IRQs gets affined to CPU0 when irqbalancer is disabled. be_iopoll processing completions in BLOCK_IOPOLL_SOFTIRQ hogged CPU0. 1. Use budget to exit the polling loop. beiscsi_process_cq didn't honour it. 2. Rearming of EQ is done only after iopoll completes. [mkp: Fixed up blk_iopoll -> irq_poll transition] Signed-off-by: Jitendra Bhivare <jitendra.bhivare@avagotech.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23be2iscsi: Fix VLAN support for IPv6 networkJitendra Bhivare
Configuring VLAN parameters through IPv6 interface was not supported in driver. Signed-off-by: Jitendra Bhivare <jitendra.bhivare@avagotech.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23be2iscsi: Added return value check for mgmt_get_all_if_idJitendra Bhivare
Use of mutex_lock_interruptible can return -EINTR, handle and log the error. Signed-off-by: Jitendra Bhivare <jitendra.bhivare@avagotech.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-12-11irq_poll: make blk-iopoll available outside the block layerChristoph Hellwig
The new name is irq_poll as iopoll is already taken. Better suggestions welcome. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
2015-10-27be2iscsi: Revert ownership to EmulexKetan Mukadam
We would like to get the following updates in: Revert ownership to "Emulex" from "Avago Technologies" Signed-off-by: Ketan Mukadam <ketan.mukadam@avagotech.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-05-18MAINTAINERS, be2iscsi: change email domainMinh Tran
be2iscsi change of ownership from Emulex to Avago Technologies recently. We like to get the following updates in: changed "Emulex" to "Avago Technologies", changed email addresses from "emulex.com" to "avagotech.com", updated MAINTAINER list for be2iscsi driver. Signed-off-by: Minh Tran <minh.tran@avagotech.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@avagotech.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2014-09-16be2iscsi: Fix processing CQE before connection resources are freedJayamohan Kallickal
Driver should process the completion queue entries before a connection resources are freed. While running mixed traffic due to latency, driver processes the CQE after the connection resources are freed. This fix processes all the completion queue before the connection resources are freed. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-16be2iscsi: Fix the copyright yearJayamohan Kallickal
Change the copyright year to 2014 Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-25bnx2i, be2iscsi: fix custom stats lengthMike Christie
The custom stats is an array with custom_length indicating the length of the array. This patch fixes bnx2i and be2iscsi's setting of the custom stats length. They both just have the one, eh_abort_cnt, so that should be in the first entry of the custom array and custom_length should then be one. Reported-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Acked-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Acked-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-28be2iscsi: Fix TCP parameters while connection offloading.Jayamohan Kallickal
SKH-R adapter, TCP Window Size/Scale parameters are passed in TCP Connection Offload Mbx Command. Signed-off-by: Minh Tran <minhduc.tran@emulex.com> Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-03-15[SCSI] be2iscsi: Fix the session cleanup when reboot/shutdown happensJayamohan Kallickal
In iSCSI Boot scenario, when machine is reboot/shutdown phase the active sessions are not closed. Driver queue cleanup is done as part of unload and device is disabled. Sessions are still active, iSCSI commands are issued from session which comes to driver, as driver cleanup and device disabled there is kernel stack dump with errors. Fix is invoking iscsi_session_failure with ISCSI_ERR_INVALID_HOST on all the active sessions when shutdown routine is called. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] be2iscsi: Fix port speed typo in driver.Jayamohan Kallickal
The 100Mbps port speed macro used was not proper. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] be2iscsi: Fix handling timed out MBX completion from FWJayamohan Kallickal
When an MBX command timeout happens,the resources associated with the MBX command were freed. If FW were to give the response to host after the timeout value set by driver then driver crashes as the MBX Cmd resources were already freed. This patch fixes this issue by maintaing a state flag for each of the MBX command posted/timedout/completed. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-12-19[SCSI] be2iscsi: fix memory leak in error pathGeyslan G. Bem
There are two memory leaks in cases 'ISCSI_NET_PARAM_VLAN_ID' and 'ISCSI_NET_PARAM_VLAN_PRIORITY' and also a potential junk pointer free if mgmt_get_if_info() returns error because if_info will be unset and it is stack allocated. Signed-off-by: Geyslan G. Bem <geyslan@gmail.com> Cc: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] be2iscsi: Fix AER handling in driverJayamohan Kallickal
Signed-off-by: Minh Tran <minhduc.tran@emulex.com> Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] be2iscsi: Fix Insufficient Buffer Error returned in MBX CompletionJayamohan Kallickal
When MBX_Cmd completion happens with error code Insufficient Buffer, the MBX_Cmd is posted again with the new buffer size posted by FW. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] be2iscsi: Fix connection offload to support Dual Chute.Jayamohan Kallickal
The connection is offload to each chute in a round-robin manner if both the chute is loaded with iSCSI protocol Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] be2iscsi: Fix CID allocation/freeing to support Dual chute modeJayamohan Kallickal
Configuration parameters returns the number of connection that can be offloaded one each chute. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] be2iscsi: Fix negotiated parameters upload to FWJayamohan Kallickal
- Removed the check of MaxXmitDSL == 0 as this is not a possible case. - Update connection offload data structure for SKH-R adapters. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] be2iscsi: Fix repeated issue of MAC ADDR get IOCTLJayamohan Kallickal
Storing MAC ADDR of each function in it's priv structure to avoid issuing MAC_ADDR get IOCTL. Based on a flag set/unset it's decided if MAC_ADDR is stored in priv structure or IOCTL needs to be issued. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-02[SCSI] be2scsi: Update copyright dates to 2013Jayamohan Kallickal
Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-02[SCSI] be2iscsi: Fix checking Adapter state while establishing CXNJayamohan Kallickal
Before tyring to establish a CXN with the target, check if the adapter is in a stable state Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-02[SCSI] be2iscsi: Fix dynamic CID allocation Mechanism in driverJayamohan Kallickal
Number of CID assigned to a function from adapter can be dynamic. The CID count for each function was fixed number before. Code Fix done so that adapters with fixed/dynamic CID count will work with the driver. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-02[SCSI] be2iscsi : Fix the NOP-In handling code pathJayamohan Kallickal
When target send a NOP-IN with valid TTT, driver issues a NOP-OUT and the task was not freed from driver. The task list available for the session used to run out, and as no more task list were available no more iSCSI commands were exchanged on that session. This patches fixed the issue, by calling iscsi_put_task. Signed-off-by: Minh Tran <minhduc.tran@emulex.com> Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-02[SCSI] be2iscsi: Fix freeing CXN specific driver resources.Jayamohan Kallickal
Free CXN specific resource held by driver when login redirection or connection retry happens. Login redirection was failing because WRB/SGL were not allocated from the CID on which doorbell was rung. Fixed the issue raised by MikeC Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-02[SCSI] be2iscsi: Fix MBX Command issuesJayamohan Kallickal
- Check Ready Bit before posting the BMBX Hi Address - Fix the parameters passed to beiscsi_mccq_compl in beiscsi_open_conn() - Fix tag value check in beiscsi_ep_connect. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-04-24treewide: Fix typo in printk and commentsMasanari Iida
Fix typo in printk and comments within various drivers. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-27[SCSI] be2iscsi: Fix for MBX timeout issueJohn Soni Jose
The MBX timeout value set to 100 and if adapter doesn;t return response in that time driver will return from waiting for completion with an error to the caller. In the earlier code driver use to wait until MBX response comes from adapter. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-11-27[SCSI] be2iscsi: Update the copyright informationJohn Soni Jose
Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-11-27[SCSI] be2iscsi: Fix session update context with V2 version.John Soni Jose
For updating session context on adapter, V2 version is to be used with the latest adapter. This fix checks for the adapter type and uses correct version of session context. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-11-27[SCSI] be2iscsi: Fix return value and typo.John Soni Jose
Fix return value and typo in the message displayed. Fix the goto label when wrb_hanlde allocation fails. Fix the error message display in beiscsi_alloc_pdu Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-14[SCSI] be2iscsi: Fix a kernel panic because of TCP RST/FIN received.John Soni Jose
A TCP RST/FIN can be received even before the connection specific structures are initialized.This fix checks for the conn structure is intialized or not when RST/FIN is received. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-14[SCSI] be2iscsi: Add support for configuring the VLAN on the adapter.John Soni Jose
Add support for configuring the VLAN parameters on the adapter using the iscsiadm interface. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-14[SCSI] be2iscsi: Format the MAC_ADDR with sysfs_format_mac.John Soni Jose
The MAC_ADDR stored in driver private structure is of unsigned char data type but strlcpy parameters is of signed char data type. This conversion of data types lead to change in the value.This changed value is passed to the upper layer and junk characters were displayed when "iscsiadm -m iface" command was run. In case of iSCSI boot, since the the MAC_ADDR was coming junk the boot was also not working Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-14[SCSI] be2iscsi: Added Logging mechanism for the driver.John Soni Jose
Added new log level mechanism for different events. These log levels can be set at driver load time/run time. The log level is set for each Scsi_host. Fixed few multi-line print warning to get over the new checkpatch.pl warnings on multi-line strings. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-25[SCSI] be2iscsi: Get Port State and Speed of the AdapterJohn Soni Jose
Implement ISCSI_HOST_PARAM_PORT_STATE and ISCSI_HOST_PARAM_PORT_SPEED to get the Adapter port state and port name Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-25[SCSI] be2iscsi: adding functionality to change network settings using iscsiadmMike Christie
This patch allows iscsiadm to set/ delete static IP and enable /disable DHCP. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-25[SCSI] be2iscsi: Get Initiator Name for the iSCSI_HostJohn Soni Jose
Implement the ISCSI_HOST_PARAM_INITIATOR_NAME for .get_host_param Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-25[SCSI] be2iscsi: Fix typo function name mismatchJayamohan Kallickal
Signed-off-by: Minh Tran <MinhDuc.Tran@Emulex.Com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-03switch ->is_visible() to returning umode_tAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-08-27[SCSI] be2iscsi: remove host and session castsMike Christie
iscsi_session_to_shost is a macro around dev_to_shost which returns a Scsi_Host so there is no need to cast. iscsi_session_to_shost is a macro around shost_priv which returns a void pointer so no need to cast. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-27[SCSI] iscsi class: sysfs group is_visible callout for iscsi host attrsMike Christie
The iscsi class currently does not support writable sysfs attrs for LLD sysfs settings. This patch converts the iscsi class and driver's host attrs to use the attribute container sysfs group and the sysfs group's is_visible callout to be able to support readable or writable sysfs attrs. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-27[SCSI] iscsi class: sysfs group is_visible callout for session attrsMike Christie
The iscsi class currently does not support writable sysfs attrs for LLD sysfs settings. This patch converts the iscsi class and driver's session attrs to use the attribute container sysfs group and the sysfs group's is_visible callout to be able to support readable or writable sysfs attrs. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-27[SCSI] iscsi cls: sysfs group is_visible callout for conn attrsMike Christie
The iscsi class currently does not support writable sysfs attrs for LLD sysfs settings. This patch converts the iscsi class and drivers to use the attribute container sysfs group and the sysfs group's is_visible callout to be able to support readable or writable sysfs attrs. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-04-15[SCSI] be2iscsi: change in copyright noticeJayamohan Kallickal
- Modifying copyright year to 2011 - Replacing Serverengines with Emulex as Serverengines Corp has been acquired by Emulex Corp Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-24[SCSI] be2iscsi: fix null ptr ref in conn get paramMike Christie
The ep_disconnect function could be freeing the ep while beiscsi_conn_get_param is running. This has the driver use the get ep param callback instead of the get conn param to fix this. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (84 commits) [SCSI] be2iscsi: SGE Len == 64K [SCSI] be2iscsi: Remove premature free of cid [SCSI] be2iscsi: More time for FW [SCSI] libsas: fix bug for vacant phy [SCSI] sd: Fix overflow with big physical blocks [SCSI] st: add MTWEOFI to write filemarks without flushing drive buffer [SCSI] libsas: Don't issue commands to devices that have been hot-removed [SCSI] megaraid_sas: Add Online Controller Reset to MegaRAID SAS drive [SCSI] lpfc 8.3.17: Update lpfc driver version to 8.3.17 [SCSI] lpfc 8.3.17: Replace function reset methodology [SCSI] lpfc 8.3.17: SCSI fixes [SCSI] lpfc 8.3.17: BSG fixes [SCSI] lpfc 8.3.17: SLI Additions and Fixes [SCSI] lpfc 8.3.17: Code Cleanup and Locking fixes [SCSI] zfcp: Remove scsi_cmnd->serial_number from debug traces [SCSI] ipr: fix array error logging [SCSI] aha152x: enable PCMCIA on 64bit [SCSI] scsi_dh_alua: Handle all states correctly [SCSI] cxgb4i: connection and ddp setting update [SCSI] cxgb3i: fixed connection over vlan ...
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-28 18:49:15 +0000