| Age | Commit message (Collapse) | Author | |
|---|---|---|---|
| 2020-01-26 | s390/qeth: remove HARDSETUP state | Julian Wiedmann | |
| qeth_l?_stop_card() is _never_ called while in HARDSETUP state, and there's no other usage of the card state that relies on the DOWN -> HARDSETUP -> SOFTSETUP transition. As related cleanup, remove the check in qeth_realloc_buffer_pool() as it is already done by the callers. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||
| 2020-01-26 | s390/qeth: make cmd/reply matching more flexible | Julian Wiedmann | |
| When data is received on the READ channel, the matching logic for cmds that are waiting for a reply is currently hard-coded into the channel's main IO callback. Move this into a per-cmd callback, so that we can apply custom matching logic for each individual cmd. This also allows us to remove the coarse-grained check for unexpected non-IPA replies, since they will no longer match against _all_ pending cmds. Note that IDX cmds use _no_ matcher, since their reply is synchronously received as part of the cmd's IO. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||
| 2020-01-26 | s390/qeth: consolidate online/offline code | Julian Wiedmann | |
| Large parts of the online/offline code are identical now, and cleaning up the remaining stuff is easier with a shared core. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||
| 2020-01-26 | s390/qeth: consolidate QDIO queue setup | Julian Wiedmann | |
| Move some duplicated logic into a shared code path. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||
| 2020-01-26 | s390/qeth: shift some bridgeport code around | Julian Wiedmann | |
| qeth_l2_setup_bridgeport_attrs() is entirely unrelated to sysfs functionality, move it where it belongs. While at it merge all the bridgeport-specific code in the set-online path together. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||
| 2020-01-19 | Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/net | David S. Miller | |
| 2020-01-09 | s390/zcrypt: move ap device reset from bus to driver code | Harald Freudenberger | |
| This patch moves the reset invocation of an ap device when fresh detected from the ap bus to the probe() function of the driver responsible for this device. The virtualisation of ap devices makes it necessary to remove unconditioned resets on fresh appearing apqn devices. It may be that such a device is already enabled for guest usage. So there may be a race condition between host ap bus and guest ap bus doing the reset. This patch moves the reset from the ap bus to the zcrypt drivers. So if there is no zcrypt driver bound to an ap device - for example the ap device is bound to the vfio device driver - the ap device is untouched passed to the vfio device driver. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> | |||
| 2020-01-09 | s390/zcrypt: Fix CCA cipher key gen with clear key value function | Harald Freudenberger | |
| Regression tests showed that the CCA cipher key function which generates an CCA cipher key with given clear key value does not work correctly. At parsing the reply CPRB two limits are wrong calculated resulting in rejecting the reply as invalid with s390dbf message "_ip_cprb_helper reply with invalid or unknown key block". Fixes: f2bbc96e7cfa ("s390/pkey: add CCA AES cipher key support") Cc: Stable <stable@vger.kernel.org> Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> | |||
| 2019-12-31 | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net | David S. Miller | |
| Simple overlapping changes in bpf land wrt. bpf_helper_defs.h handling. Signed-off-by: David S. Miller <davem@davemloft.net> | |||
| 2019-12-26 | s390/qeth: remove QETH_RX_PULL_LEN | Julian Wiedmann | |
| Since commit f677fcb9aeb6 ("s390/qeth: ensure linear access to packet headers"), the CQ-specific skbs are allocated with a slightly bigger linear part than necessary. Shrink it down to the maximum that's needed by qeth_extract_skb(). Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||
| 2019-12-26 | s390/qeth: use napi_gro_frags() for SG skbs | Julian Wiedmann | |
| For non-linear packets, get the skb for attaching the page fragments from napi_get_frags() so that it can be recycled during GRO. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||
| 2019-12-26 | s390/qeth: consolidate RX code | Julian Wiedmann | |
| To reduce the path length and levels of indirection, move the RX processing from the sub-drivers into the core. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||
| 2019-12-24 | s390/qeth: fix initialization on old HW | Julian Wiedmann | |
| I stumbled over an old OSA model that claims to support DIAG_ASSIST, but then rejects the cmd to query its DIAG capabilities. In the old code this was ok, as the returned raw error code was > 0. Now that we translate the raw codes to errnos, the "rc < 0" causes us to fail the initialization of the device. The fix is trivial: don't bail out when the DIAG query fails. Such an error is not critical, we can still use the device (with a slightly reduced set of features). Fixes: 742d4d40831d ("s390/qeth: convert remaining legacy cmd callbacks") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||
| 2019-12-24 | s390/qeth: vnicc Fix init to default | Alexandra Winter | |
| During vnicc_init wanted_char should be compared to cur_char and not to QETH_VNICC_DEFAULT. Without this patch there is no way to enforce the default values as desired values. Note, that it is expected, that a card comes online with default values. This patch was tested with private card firmware. Fixes: caa1f0b10d18 ("s390/qeth: add VNICC enable/disable support") Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||
| 2019-12-24 | s390/qeth: Fix vnicc_is_in_use if rx_bcast not set | Alexandra Winter | |
| Symptom: After vnicc/rx_bcast has been manually set to 0, bridge_* sysfs parameters can still be set or written. Only occurs on HiperSockets, as OSA doesn't support changing rx_bcast. Vnic characteristics and bridgeport settings are mutually exclusive. rx_bcast defaults to 1, so manually setting it to 0 should disable bridge_* parameters. Instead it makes sense here to check the supported mask. If the card does not support vnicc at all, bridge commands are always allowed. Fixes: caa1f0b10d18 ("s390/qeth: add VNICC enable/disable support") Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||
| 2019-12-24 | s390/qeth: fix false reporting of VNIC CHAR config failure | Alexandra Winter | |
| Symptom: Error message "Configuring the VNIC characteristics failed" in dmesg whenever an OSA interface on z15 is set online. The VNIC characteristics get re-programmed when setting a L2 device online. This follows the selected 'wanted' characteristics - with the exception that the INVISIBLE characteristic unconditionally gets switched off. For devices that don't support INVISIBLE (ie. OSA), the resulting IO failure raises a noisy error message ("Configuring the VNIC characteristics failed"). For IQD, INVISIBLE is off by default anyways. So don't unnecessarily special-case the INVISIBLE characteristic, and thereby suppress the misleading error message on OSA devices. Fixes: caa1f0b10d18 ("s390/qeth: add VNICC enable/disable support") Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||
| 2019-12-24 | s390/qeth: lock the card while changing its hsuid | Julian Wiedmann | |
| qeth_l3_dev_hsuid_store() initially checks the card state, but doesn't take the conf_mutex to ensure that the card stays in this state while being reconfigured. Rework the code to take this lock, and drop a redundant state check in a helper function. Fixes: b333293058aa ("qeth: add support for af_iucv HiperSockets transport") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||
| 2019-12-24 | s390/qeth: fix qdio teardown after early init error | Julian Wiedmann | |
| qeth_l?_set_online() goes through a number of initialization steps, and on any error uses qeth_l?_stop_card() to tear down the residual state. The first initialization step is qeth_core_hardsetup_card(). When this fails after having established a QDIO context on the device (ie. somewhere after qeth_mpc_initialize()), qeth_l?_stop_card() doesn't shut down this QDIO context again (since the card state hasn't progressed from DOWN at this stage). Even worse, we then call qdio_free() as final teardown step to free the QDIO data structures - while some of them are still hooked into wider QDIO infrastructure such as the IRQ list. This is inevitably followed by use-after-frees and other nastyness. Fix this by unconditionally calling qeth_qdio_clear_card() to shut down the QDIO context, and also to halt/clear any pending activity on the various IO channels. Remove the naive attempt at handling the teardown in qeth_mpc_initialize(), it clearly doesn't suffice and we're handling it properly now in the wider teardown code. Fixes: 4a71df50047f ("qeth: new qeth device driver") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||
| 2019-12-22 | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net | David S. Miller | |
| Mere overlapping changes in the conflicts here. Signed-off-by: David S. Miller <davem@davemloft.net> | |||
| 2019-12-22 | Merge tag 'block-5.5-20191221' of git://git.kernel.dk/linux-block | Linus Torvalds | |
| Pull block fixes from Jens Axboe: "Let's try this one again, this time without the compat_ioctl changes. We've got those fixed up, but that can go out next week. This contains: - block queue flush lockdep annotation (Bart) - Type fix for bsg_queue_rq() (Bart) - Three dasd fixes (Stefan, Jan) - nbd deadlock fix (Mike) - Error handling bio user map fix (Yang) - iocost fix (Tejun) - sbitmap waitqueue addition fix that affects the kyber IO scheduler (David)" * tag 'block-5.5-20191221' of git://git.kernel.dk/linux-block: sbitmap: only queue kyber's wait callback if not already active block: fix memleak when __blk_rq_map_user_iov() is failed s390/dasd: fix typo in copyright statement s390/dasd: fix memleak in path handling error case s390/dasd/cio: Interpret ccw_device_get_mdc return value correctly block: Fix a lockdep complaint triggered by request queue flushing block: Fix the type of 'sts' in bsg_queue_rq() block: end bio with BLK_STS_AGAIN in case of non-mq devs and REQ_NOWAIT nbd: fix shutdown and recv work deadlock v2 iocost: over-budget forced IOs should schedule async delay | |||
| 2019-12-22 | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net | Linus Torvalds | |
| Pull networking fixes from David Miller: 1) Several nf_flow_table_offload fixes from Pablo Neira Ayuso, including adding a missing ipv6 match description. 2) Several heap overflow fixes in mwifiex from qize wang and Ganapathi Bhat. 3) Fix uninit value in bond_neigh_init(), from Eric Dumazet. 4) Fix non-ACPI probing of nxp-nci, from Stephan Gerhold. 5) Fix use after free in tipc_disc_rcv(), from Tuong Lien. 6) Enforce limit of 33 tail calls in mips and riscv JIT, from Paul Chaignon. 7) Multicast MAC limit test is off by one in qede, from Manish Chopra. 8) Fix established socket lookup race when socket goes from TCP_ESTABLISHED to TCP_LISTEN, because there lacks an intervening RCU grace period. From Eric Dumazet. 9) Don't send empty SKBs from tcp_write_xmit(), also from Eric Dumazet. 10) Fix active backup transition after link failure in bonding, from Mahesh Bandewar. 11) Avoid zero sized hash table in gtp driver, from Taehee Yoo. 12) Fix wrong interface passed to ->mac_link_up(), from Russell King. 13) Fix DSA egress flooding settings in b53, from Florian Fainelli. 14) Memory leak in gmac_setup_txqs(), from Navid Emamdoost. 15) Fix double free in dpaa2-ptp code, from Ioana Ciornei. 16) Reject invalid MTU values in stmmac, from Jose Abreu. 17) Fix refcount leak in error path of u32 classifier, from Davide Caratti. 18) Fix regression causing iwlwifi firmware crashes on boot, from Anders Kaseorg. 19) Fix inverted return value logic in llc2 code, from Chan Shu Tak. 20) Disable hardware GRO when XDP is attached to qede, frm Manish Chopra. 21) Since we encode state in the low pointer bits, dst metrics must be at least 4 byte aligned, which is not necessarily true on m68k. Add annotations to fix this, from Geert Uytterhoeven. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (160 commits) sfc: Include XDP packet headroom in buffer step size. sfc: fix channel allocation with brute force net: dst: Force 4-byte alignment of dst_metrics selftests: pmtu: fix init mtu value in description hv_netvsc: Fix unwanted rx_table reset net: phy: ensure that phy IDs are correctly typed mod_devicetable: fix PHY module format qede: Disable hardware gro when xdp prog is installed net: ena: fix issues in setting interrupt moderation params in ethtool net: ena: fix default tx interrupt moderation interval net/smc: unregister ib devices in reboot_event net: stmmac: platform: Fix MDIO init for platforms without PHY llc2: Fix return statement of llc_stat_ev_rx_null_dsap_xid_c (and _test_c) net: hisilicon: Fix a BUG trigered by wrong bytes_compl net: dsa: ksz: use common define for tag len s390/qeth: don't return -ENOTSUPP to userspace s390/qeth: fix promiscuous mode after reset s390/qeth: handle error due to unsupported transport mode cxgb4: fix refcount init for TC-MQPRIO offload tc-testing: initial tdc selftests for cls_u32 ... | |||
| 2019-12-20 | s390/qeth: don't return -ENOTSUPP to userspace | Julian Wiedmann | |
| ENOTSUPP is not uapi, use EOPNOTSUPP instead. Fixes: d66cb37e9664 ("qeth: Add new priority queueing options") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||
| 2019-12-20 | s390/qeth: fix promiscuous mode after reset | Julian Wiedmann | |
| When managing the promiscuous mode during an RX modeset, qeth caches the current HW state to avoid repeated programming of the same state on each modeset. But while tearing down a device, we forget to clear the cached state. So when the device is later set online again, the initial RX modeset doesn't program the promiscuous mode since we believe it is already enabled. Fix this by clearing the cached state in the tear-down path. Note that for the SBP variant of promiscuous mode, this accidentally works right now because we unconditionally restore the SBP role while re-initializing. Fixes: 4a71df50047f ("qeth: new qeth device driver") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||
| 2019-12-20 | s390/qeth: handle error due to unsupported transport mode | Julian Wiedmann | |
| Along with z/VM NICs, there's additional device types that only support a specific transport mode (eg. external-bridged IQD). Identify the corresponding error code, and raise a fitting error message so that the user knows to adjust their device configuration. On top of that also fix the subsequent error path, so that the rejected cmd doesn't need to wait for a timeout but gets cancelled straight away. Fixes: 4a71df50047f ("qeth: new qeth device driver") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||
| 2019-12-20 | s390/dasd: fix typo in copyright statement | Stefan Haberland | |
| coypright -> copyright Reported-by: Kate Stewart <kstewart@linuxfoundation.org> Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | |||
| 2019-12-20 | s390/dasd: fix memleak in path handling error case | Stefan Haberland | |
| If for whatever reason the dasd_eckd_check_characteristics() function exits after at least some paths have their configuration data allocated those data is never freed again. In the error case the device->private pointer is set to NULL and dasd_eckd_uncheck_device() will exit without freeing the path data because of this NULL pointer. Fix by calling dasd_eckd_clear_conf_data() for error cases. Also use dasd_eckd_clear_conf_data() in dasd_eckd_uncheck_device() to avoid code duplication. Reported-by: Qian Cai <cai@lca.pw> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | |||
| 2019-12-20 | s390/dasd/cio: Interpret ccw_device_get_mdc return value correctly | Jan Höppner | |
| The max data count (mdc) is an unsigned 16-bit integer value as per AR documentation and is received via ccw_device_get_mdc() for a specific path mask from the CIO layer. The function itself also always returns a positive mdc value or 0 in case mdc isn't supported or couldn't be determined. Though, the comment for this function describes a negative return value to indicate failures. As a result, the DASD device driver interprets the return value of ccw_device_get_mdc() incorrectly. The error case is essentially a dead code path. To fix this behaviour, check explicitly for a return value of 0 and change the comment for ccw_device_get_mdc() accordingly. This fix merely enables the error code path in the DASD functions get_fcx_max_data() and verify_fcx_max_data(). The actual functionality stays the same and is still correct. Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com> Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | |||
| 2019-12-18 | s390/qeth: make use of napi_schedule_irqoff() | Julian Wiedmann | |
| qeth_qdio_start_poll() is called from the qdio layer's IRQ handler, while IRQs are masked. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||
| 2019-12-18 | s390/qeth: consolidate helpers for capability checking | Julian Wiedmann | |
| Convert the old code to use struct qeth_ipa_caps, and while at it remove all unused helper macros. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||
| 2019-12-18 | s390/qeth: stop yielding the ip_lock during IPv4 registration | Julian Wiedmann | |
| As commit df2a2a5225cc ("s390/qeth: convert IP table spinlock to mutex") converted the ip_lock to a mutex, we no longer have to yield it while the subsequent IO sleep-waits for completion. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||
| 2019-12-18 | s390/qeth: don't raise NETDEV_REBOOT event from L3 offline path | Julian Wiedmann | |
| This is a leftover from back when a recovery action didn't go through dev_close(), and was meant to shoot down all remaining af_iucv sockets on the interface. Now that the offline path always calls dev_close(), the NETDEV_GOING_DOWN event from __dev_close_many() is sufficient and this hack can be removed. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||
| 2019-12-18 | s390/qeth: remove open-coded inet_make_mask() | Julian Wiedmann | |
| Use inet_make_mask() to replace some complicated bit-fiddling. Also use the right data types to replace some raw memcpy calls with proper assignments. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||
| 2019-12-18 | s390/qeth: clean up L3 sysfs code | Julian Wiedmann | |
| Consolidate some duplicated code for adding RXIP/VIPA addresses, and move the locking to where it's actually needed. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||
| 2019-12-18 | s390/qeth: overhaul L3 IP address dump code | Julian Wiedmann | |
| The current code that dumps the RXIP/VIPA/IPATO addresses via sysfs first checks whether the buffer still provides sufficient space to hold another formatted address. But the maximum length of an formatted IPv4 address is 15 characters, not 12. So we underestimate the max required length and if the buffer was previously filled to _just_ the right level, a formatted address can end up being truncated. Revamp these code paths to use the _actually_ required length of the formatted IP address, and while at it suppress a gratuitous newline. Also use scnprintf() to format the output. In case of a truncation, this would allow us to return the number of characters that were actually written. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||
| 2019-12-18 | s390/qeth: wake up all waiters from qeth_irq() | Julian Wiedmann | |
| card->wait_q is shared by different users, for different wake-up conditions. qeth_irq() can potentially trigger multiple of these conditions: 1) A change to channel->irq_pending, which qeth_send_control_data() is waiting for. 2) A change to card->state, which qeth_clear_channel() and qeth_halt_channel() are waiting for. As qeth_irq() does only a single wake_up(), we might miss to wake up a second eligible waiter. Luckily all waiters are guarded with a timeout, so this situation should recover on its own eventually. To make things work robustly, add an additional wake_up() for changes to channel->state. And extract a helper that updates channel->irq_pending along with the needed wake_up(). Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||
| 2019-12-18 | s390/qeth: only handle IRQs while device is online | Julian Wiedmann | |
| A qeth device that's offline should not be receiving any IRQs - all pending IOs have been terminated, and we avoid starting any new ones. So rather than immediately registering the IRQ handler when the device is probed, only register it while the device is online. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||
| 2019-12-12 | netdev: pass the stuck queue to the timeout handler | Michael S. Tsirkin | |
| This allows incrementing the correct timeout statistic without any mess. Down the road, devices can learn to reset just the specific queue. The patch was generated with the following script: use strict; use warnings; our $^I = '.bak'; my @work = ( ["arch/m68k/emu/nfeth.c", "nfeth_tx_timeout"], ["arch/um/drivers/net_kern.c", "uml_net_tx_timeout"], ["arch/um/drivers/vector_kern.c", "vector_net_tx_timeout"], ["arch/xtensa/platforms/iss/network.c", "iss_net_tx_timeout"], ["drivers/char/pcmcia/synclink_cs.c", "hdlcdev_tx_timeout"], ["drivers/infiniband/ulp/ipoib/ipoib_main.c", "ipoib_timeout"], ["drivers/infiniband/ulp/ipoib/ipoib_main.c", "ipoib_timeout"], ["drivers/message/fusion/mptlan.c", "mpt_lan_tx_timeout"], ["drivers/misc/sgi-xp/xpnet.c", "xpnet_dev_tx_timeout"], ["drivers/net/appletalk/cops.c", "cops_timeout"], ["drivers/net/arcnet/arcdevice.h", "arcnet_timeout"], ["drivers/net/arcnet/arcnet.c", "arcnet_timeout"], ["drivers/net/arcnet/com20020.c", "arcnet_timeout"], ["drivers/net/ethernet/3com/3c509.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c515.c", "corkscrew_timeout"], ["drivers/net/ethernet/3com/3c574_cs.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c589_cs.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c59x.c", "vortex_tx_timeout"], ["drivers/net/ethernet/3com/3c59x.c", "vortex_tx_timeout"], ["drivers/net/ethernet/3com/typhoon.c", "typhoon_tx_timeout"], ["drivers/net/ethernet/8390/8390.h", "ei_tx_timeout"], ["drivers/net/ethernet/8390/8390.h", "eip_tx_timeout"], ["drivers/net/ethernet/8390/8390.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/8390p.c", "eip_tx_timeout"], ["drivers/net/ethernet/8390/ax88796.c", "ax_ei_tx_timeout"], ["drivers/net/ethernet/8390/axnet_cs.c", "axnet_tx_timeout"], ["drivers/net/ethernet/8390/etherh.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/hydra.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/mac8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/mcf8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/lib8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/ne2k-pci.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/pcnet_cs.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/smc-ultra.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/wd.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/zorro8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/adaptec/starfire.c", "tx_timeout"], ["drivers/net/ethernet/agere/et131x.c", "et131x_tx_timeout"], ["drivers/net/ethernet/allwinner/sun4i-emac.c", "emac_timeout"], ["drivers/net/ethernet/alteon/acenic.c", "ace_watchdog"], ["drivers/net/ethernet/amazon/ena/ena_netdev.c", "ena_tx_timeout"], ["drivers/net/ethernet/amd/7990.h", "lance_tx_timeout"], ["drivers/net/ethernet/amd/7990.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/a2065.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/am79c961a.c", "am79c961_timeout"], ["drivers/net/ethernet/amd/amd8111e.c", "amd8111e_tx_timeout"], ["drivers/net/ethernet/amd/ariadne.c", "ariadne_tx_timeout"], ["drivers/net/ethernet/amd/atarilance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/au1000_eth.c", "au1000_tx_timeout"], ["drivers/net/ethernet/amd/declance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/lance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/mvme147.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/ni65.c", "ni65_timeout"], ["drivers/net/ethernet/amd/nmclan_cs.c", "mace_tx_timeout"], ["drivers/net/ethernet/amd/pcnet32.c", "pcnet32_tx_timeout"], ["drivers/net/ethernet/amd/sunlance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/xgbe/xgbe-drv.c", "xgbe_tx_timeout"], ["drivers/net/ethernet/apm/xgene-v2/main.c", "xge_timeout"], ["drivers/net/ethernet/apm/xgene/xgene_enet_main.c", "xgene_enet_timeout"], ["drivers/net/ethernet/apple/macmace.c", "mace_tx_timeout"], ["drivers/net/ethernet/atheros/ag71xx.c", "ag71xx_tx_timeout"], ["drivers/net/ethernet/atheros/alx/main.c", "alx_tx_timeout"], ["drivers/net/ethernet/atheros/atl1c/atl1c_main.c", "atl1c_tx_timeout"], ["drivers/net/ethernet/atheros/atl1e/atl1e_main.c", "atl1e_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl.c", "atlx_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl1.c", "atlx_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl2.c", "atl2_tx_timeout"], ["drivers/net/ethernet/broadcom/b44.c", "b44_tx_timeout"], ["drivers/net/ethernet/broadcom/bcmsysport.c", "bcm_sysport_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2.c", "bnx2_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnxt/bnxt.c", "bnxt_tx_timeout"], ["drivers/net/ethernet/broadcom/genet/bcmgenet.c", "bcmgenet_timeout"], ["drivers/net/ethernet/broadcom/sb1250-mac.c", "sbmac_tx_timeout"], ["drivers/net/ethernet/broadcom/tg3.c", "tg3_tx_timeout"], ["drivers/net/ethernet/calxeda/xgmac.c", "xgmac_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_main.c", "liquidio_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_vf_main.c", "liquidio_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_vf_rep.c", "lio_vf_rep_tx_timeout"], ["drivers/net/ethernet/cavium/thunder/nicvf_main.c", "nicvf_tx_timeout"], ["drivers/net/ethernet/cirrus/cs89x0.c", "net_timeout"], ["drivers/net/ethernet/cisco/enic/enic_main.c", "enic_tx_timeout"], ["drivers/net/ethernet/cisco/enic/enic_main.c", "enic_tx_timeout"], ["drivers/net/ethernet/cortina/gemini.c", "gmac_tx_timeout"], ["drivers/net/ethernet/davicom/dm9000.c", "dm9000_timeout"], ["drivers/net/ethernet/dec/tulip/de2104x.c", "de_tx_timeout"], ["drivers/net/ethernet/dec/tulip/tulip_core.c", "tulip_tx_timeout"], ["drivers/net/ethernet/dec/tulip/winbond-840.c", "tx_timeout"], ["drivers/net/ethernet/dlink/dl2k.c", "rio_tx_timeout"], ["drivers/net/ethernet/dlink/sundance.c", "tx_timeout"], ["drivers/net/ethernet/emulex/benet/be_main.c", "be_tx_timeout"], ["drivers/net/ethernet/ethoc.c", "ethoc_tx_timeout"], ["drivers/net/ethernet/faraday/ftgmac100.c", "ftgmac100_tx_timeout"], ["drivers/net/ethernet/fealnx.c", "fealnx_tx_timeout"], ["drivers/net/ethernet/freescale/dpaa/dpaa_eth.c", "dpaa_tx_timeout"], ["drivers/net/ethernet/freescale/fec_main.c", "fec_timeout"], ["drivers/net/ethernet/freescale/fec_mpc52xx.c", "mpc52xx_fec_tx_timeout"], ["drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c", "fs_timeout"], ["drivers/net/ethernet/freescale/gianfar.c", "gfar_timeout"], ["drivers/net/ethernet/freescale/ucc_geth.c", "ucc_geth_timeout"], ["drivers/net/ethernet/fujitsu/fmvj18x_cs.c", "fjn_tx_timeout"], ["drivers/net/ethernet/google/gve/gve_main.c", "gve_tx_timeout"], ["drivers/net/ethernet/hisilicon/hip04_eth.c", "hip04_timeout"], ["drivers/net/ethernet/hisilicon/hix5hd2_gmac.c", "hix5hd2_net_timeout"], ["drivers/net/ethernet/hisilicon/hns/hns_enet.c", "hns_nic_net_timeout"], ["drivers/net/ethernet/hisilicon/hns3/hns3_enet.c", "hns3_nic_net_timeout"], ["drivers/net/ethernet/huawei/hinic/hinic_main.c", "hinic_tx_timeout"], ["drivers/net/ethernet/i825xx/82596.c", "i596_tx_timeout"], ["drivers/net/ethernet/i825xx/ether1.c", "ether1_timeout"], ["drivers/net/ethernet/i825xx/lib82596.c", "i596_tx_timeout"], ["drivers/net/ethernet/i825xx/sun3_82586.c", "sun3_82586_timeout"], ["drivers/net/ethernet/ibm/ehea/ehea_main.c", "ehea_tx_watchdog"], ["drivers/net/ethernet/ibm/emac/core.c", "emac_tx_timeout"], ["drivers/net/ethernet/ibm/emac/core.c", "emac_tx_timeout"], ["drivers/net/ethernet/ibm/ibmvnic.c", "ibmvnic_tx_timeout"], ["drivers/net/ethernet/intel/e100.c", "e100_tx_timeout"], ["drivers/net/ethernet/intel/e1000/e1000_main.c", "e1000_tx_timeout"], ["drivers/net/ethernet/intel/e1000e/netdev.c", "e1000_tx_timeout"], ["drivers/net/ethernet/intel/fm10k/fm10k_netdev.c", "fm10k_tx_timeout"], ["drivers/net/ethernet/intel/i40e/i40e_main.c", "i40e_tx_timeout"], ["drivers/net/ethernet/intel/iavf/iavf_main.c", "iavf_tx_timeout"], ["drivers/net/ethernet/intel/ice/ice_main.c", "ice_tx_timeout"], ["drivers/net/ethernet/intel/ice/ice_main.c", "ice_tx_timeout"], ["drivers/net/ethernet/intel/igb/igb_main.c", "igb_tx_timeout"], ["drivers/net/ethernet/intel/igbvf/netdev.c", "igbvf_tx_timeout"], ["drivers/net/ethernet/intel/ixgb/ixgb_main.c", "ixgb_tx_timeout"], ["drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c", "adapter->netdev->netdev_ops->ndo_tx_timeout(adapter->netdev);"], ["drivers/net/ethernet/intel/ixgbe/ixgbe_main.c", "ixgbe_tx_timeout"], ["drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c", "ixgbevf_tx_timeout"], ["drivers/net/ethernet/jme.c", "jme_tx_timeout"], ["drivers/net/ethernet/korina.c", "korina_tx_timeout"], ["drivers/net/ethernet/lantiq_etop.c", "ltq_etop_tx_timeout"], ["drivers/net/ethernet/marvell/mv643xx_eth.c", "mv643xx_eth_tx_timeout"], ["drivers/net/ethernet/marvell/pxa168_eth.c", "pxa168_eth_tx_timeout"], ["drivers/net/ethernet/marvell/skge.c", "skge_tx_timeout"], ["drivers/net/ethernet/marvell/sky2.c", "sky2_tx_timeout"], ["drivers/net/ethernet/marvell/sky2.c", "sky2_tx_timeout"], ["drivers/net/ethernet/mediatek/mtk_eth_soc.c", "mtk_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx4/en_netdev.c", "mlx4_en_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx4/en_netdev.c", "mlx4_en_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx5/core/en_main.c", "mlx5e_tx_timeout"], ["drivers/net/ethernet/micrel/ks8842.c", "ks8842_tx_timeout"], ["drivers/net/ethernet/micrel/ksz884x.c", "netdev_tx_timeout"], ["drivers/net/ethernet/microchip/enc28j60.c", "enc28j60_tx_timeout"], ["drivers/net/ethernet/microchip/encx24j600.c", "encx24j600_tx_timeout"], ["drivers/net/ethernet/natsemi/sonic.h", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/sonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/jazzsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/macsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/natsemi.c", "ns_tx_timeout"], ["drivers/net/ethernet/natsemi/ns83820.c", "ns83820_tx_timeout"], ["drivers/net/ethernet/natsemi/xtsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/neterion/s2io.h", "s2io_tx_watchdog"], ["drivers/net/ethernet/neterion/s2io.c", "s2io_tx_watchdog"], ["drivers/net/ethernet/neterion/vxge/vxge-main.c", "vxge_tx_watchdog"], ["drivers/net/ethernet/netronome/nfp/nfp_net_common.c", "nfp_net_tx_timeout"], ["drivers/net/ethernet/nvidia/forcedeth.c", "nv_tx_timeout"], ["drivers/net/ethernet/nvidia/forcedeth.c", "nv_tx_timeout"], ["drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c", "pch_gbe_tx_timeout"], ["drivers/net/ethernet/packetengines/hamachi.c", "hamachi_tx_timeout"], ["drivers/net/ethernet/packetengines/yellowfin.c", "yellowfin_tx_timeout"], ["drivers/net/ethernet/pensando/ionic/ionic_lif.c", "ionic_tx_timeout"], ["drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c", "netxen_tx_timeout"], ["drivers/net/ethernet/qlogic/qla3xxx.c", "ql3xxx_tx_timeout"], ["drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c", "qlcnic_tx_timeout"], ["drivers/net/ethernet/qualcomm/emac/emac.c", "emac_tx_timeout"], ["drivers/net/ethernet/qualcomm/qca_spi.c", "qcaspi_netdev_tx_timeout"], ["drivers/net/ethernet/qualcomm/qca_uart.c", "qcauart_netdev_tx_timeout"], ["drivers/net/ethernet/rdc/r6040.c", "r6040_tx_timeout"], ["drivers/net/ethernet/realtek/8139cp.c", "cp_tx_timeout"], ["drivers/net/ethernet/realtek/8139too.c", "rtl8139_tx_timeout"], ["drivers/net/ethernet/realtek/atp.c", "tx_timeout"], ["drivers/net/ethernet/realtek/r8169_main.c", "rtl8169_tx_timeout"], ["drivers/net/ethernet/renesas/ravb_main.c", "ravb_tx_timeout"], ["drivers/net/ethernet/renesas/sh_eth.c", "sh_eth_tx_timeout"], ["drivers/net/ethernet/renesas/sh_eth.c", "sh_eth_tx_timeout"], ["drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c", "sxgbe_tx_timeout"], ["drivers/net/ethernet/seeq/ether3.c", "ether3_timeout"], ["drivers/net/ethernet/seeq/sgiseeq.c", "timeout"], ["drivers/net/ethernet/sfc/efx.c", "efx_watchdog"], ["drivers/net/ethernet/sfc/falcon/efx.c", "ef4_watchdog"], ["drivers/net/ethernet/sgi/ioc3-eth.c", "ioc3_timeout"], ["drivers/net/ethernet/sgi/meth.c", "meth_tx_timeout"], ["drivers/net/ethernet/silan/sc92031.c", "sc92031_tx_timeout"], ["drivers/net/ethernet/sis/sis190.c", "sis190_tx_timeout"], ["drivers/net/ethernet/sis/sis900.c", "sis900_tx_timeout"], ["drivers/net/ethernet/smsc/epic100.c", "epic_tx_timeout"], ["drivers/net/ethernet/smsc/smc911x.c", "smc911x_timeout"], ["drivers/net/ethernet/smsc/smc9194.c", "smc_timeout"], ["drivers/net/ethernet/smsc/smc91c92_cs.c", "smc_tx_timeout"], ["drivers/net/ethernet/smsc/smc91x.c", "smc_timeout"], ["drivers/net/ethernet/stmicro/stmmac/stmmac_main.c", "stmmac_tx_timeout"], ["drivers/net/ethernet/sun/cassini.c", "cas_tx_timeout"], ["drivers/net/ethernet/sun/ldmvsw.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/niu.c", "niu_tx_timeout"], ["drivers/net/ethernet/sun/sunbmac.c", "bigmac_tx_timeout"], ["drivers/net/ethernet/sun/sungem.c", "gem_tx_timeout"], ["drivers/net/ethernet/sun/sunhme.c", "happy_meal_tx_timeout"], ["drivers/net/ethernet/sun/sunqe.c", "qe_tx_timeout"], ["drivers/net/ethernet/sun/sunvnet.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/sunvnet_common.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/sunvnet_common.h", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/synopsys/dwc-xlgmac-net.c", "xlgmac_tx_timeout"], ["drivers/net/ethernet/ti/cpmac.c", "cpmac_tx_timeout"], ["drivers/net/ethernet/ti/cpsw.c", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/cpsw_priv.c", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/cpsw_priv.h", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/davinci_emac.c", "emac_dev_tx_timeout"], ["drivers/net/ethernet/ti/netcp_core.c", "netcp_ndo_tx_timeout"], ["drivers/net/ethernet/ti/tlan.c", "tlan_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_net.h", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_net.c", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_wireless.c", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/spider_net.c", "spider_net_tx_timeout"], ["drivers/net/ethernet/toshiba/tc35815.c", "tc35815_tx_timeout"], ["drivers/net/ethernet/via/via-rhine.c", "rhine_tx_timeout"], ["drivers/net/ethernet/wiznet/w5100.c", "w5100_tx_timeout"], ["drivers/net/ethernet/wiznet/w5300.c", "w5300_tx_timeout"], ["drivers/net/ethernet/xilinx/xilinx_emaclite.c", "xemaclite_tx_timeout"], ["drivers/net/ethernet/xircom/xirc2ps_cs.c", "xirc_tx_timeout"], ["drivers/net/fjes/fjes_main.c", "fjes_tx_retry"], ["drivers/net/slip/slip.c", "sl_tx_timeout"], ["include/linux/usb/usbnet.h", "usbnet_tx_timeout"], ["drivers/net/usb/aqc111.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/ax88172a.c", "usbnet_tx_timeout"], ["drivers/net/usb/ax88179_178a.c", "usbnet_tx_timeout"], ["drivers/net/usb/catc.c", "catc_tx_timeout"], ["drivers/net/usb/cdc_mbim.c", "usbnet_tx_timeout"], ["drivers/net/usb/cdc_ncm.c", "usbnet_tx_timeout"], ["drivers/net/usb/dm9601.c", "usbnet_tx_timeout"], ["drivers/net/usb/hso.c", "hso_net_tx_timeout"], ["drivers/net/usb/int51x1.c", "usbnet_tx_timeout"], ["drivers/net/usb/ipheth.c", "ipheth_tx_timeout"], ["drivers/net/usb/kaweth.c", "kaweth_tx_timeout"], ["drivers/net/usb/lan78xx.c", "lan78xx_tx_timeout"], ["drivers/net/usb/mcs7830.c", "usbnet_tx_timeout"], ["drivers/net/usb/pegasus.c", "pegasus_tx_timeout"], ["drivers/net/usb/qmi_wwan.c", "usbnet_tx_timeout"], ["drivers/net/usb/r8152.c", "rtl8152_tx_timeout"], ["drivers/net/usb/rndis_host.c", "usbnet_tx_timeout"], ["drivers/net/usb/rtl8150.c", "rtl8150_tx_timeout"], ["drivers/net/usb/sierra_net.c", "usbnet_tx_timeout"], ["drivers/net/usb/smsc75xx.c", "usbnet_tx_timeout"], ["drivers/net/usb/smsc95xx.c", "usbnet_tx_timeout"], ["drivers/net/usb/sr9700.c", "usbnet_tx_timeout"], ["drivers/net/usb/sr9800.c", "usbnet_tx_timeout"], ["drivers/net/usb/usbnet.c", "usbnet_tx_timeout"], ["drivers/net/vmxnet3/vmxnet3_drv.c", "vmxnet3_tx_timeout"], ["drivers/net/wan/cosa.c", "cosa_net_timeout"], ["drivers/net/wan/farsync.c", "fst_tx_timeout"], ["drivers/net/wan/fsl_ucc_hdlc.c", "uhdlc_tx_timeout"], ["drivers/net/wan/lmc/lmc_main.c", "lmc_driver_timeout"], ["drivers/net/wan/x25_asy.c", "x25_asy_timeout"], ["drivers/net/wimax/i2400m/netdev.c", "i2400m_tx_timeout"], ["drivers/net/wireless/intel/ipw2x00/ipw2100.c", "ipw2100_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/main.c", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/orinoco_usb.c", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/orinoco.h", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_dev.c", "islpci_eth_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_eth.c", "islpci_eth_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_eth.h", "islpci_eth_tx_timeout"], ["drivers/net/wireless/marvell/mwifiex/main.c", "mwifiex_tx_timeout"], ["drivers/net/wireless/quantenna/qtnfmac/core.c", "qtnf_netdev_tx_timeout"], ["drivers/net/wireless/quantenna/qtnfmac/core.h", "qtnf_netdev_tx_timeout"], ["drivers/net/wireless/rndis_wlan.c", "usbnet_tx_timeout"], ["drivers/net/wireless/wl3501_cs.c", "wl3501_tx_timeout"], ["drivers/net/wireless/zydas/zd1201.c", "zd1201_tx_timeout"], ["drivers/s390/net/qeth_core.h", "qeth_tx_timeout"], ["drivers/s390/net/qeth_core_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l2_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l2_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l3_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l3_main.c", "qeth_tx_timeout"], ["drivers/staging/ks7010/ks_wlan_net.c", "ks_wlan_tx_timeout"], ["drivers/staging/qlge/qlge_main.c", "qlge_tx_timeout"], ["drivers/staging/rtl8192e/rtl8192e/rtl_core.c", "_rtl92e_tx_timeout"], ["drivers/staging/rtl8192u/r8192U_core.c", "tx_timeout"], ["drivers/staging/unisys/visornic/visornic_main.c", "visornic_xmit_timeout"], ["drivers/staging/wlan-ng/p80211netdev.c", "p80211knetdev_tx_timeout"], ["drivers/tty/n_gsm.c", "gsm_mux_net_tx_timeout"], ["drivers/tty/synclink.c", "hdlcdev_tx_timeout"], ["drivers/tty/synclink_gt.c", "hdlcdev_tx_timeout"], ["drivers/tty/synclinkmp.c", "hdlcdev_tx_timeout"], ["net/atm/lec.c", "lec_tx_timeout"], ["net/bluetooth/bnep/netdev.c", "bnep_net_timeout"] ); for my $p (@work) { my @pair = @$p; my $file = $pair[0]; my $func = $pair[1]; print STDERR $file , ": ", $func,"\n"; our @ARGV = ($file); while (<ARGV>) { if (m/($func\s*\(struct\s+net_device\s+\*[A-Za-z_]?[A-Za-z-0-9_]*)(\))/) { print STDERR "found $1+$2 in $file\n"; } if (s/($func\s*\(struct\s+net_device\s+\*[A-Za-z_]?[A-Za-z-0-9_]*)(\))/$1, unsigned int txqueue$2/) { print STDERR "$func found in $file\n"; } print; } } where the list of files and functions is simply from: git grep ndo_tx_timeout, with manual addition of headers in the rare cases where the function is from a header, then manually changing the few places which actually call ndo_tx_timeout. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Shannon Nelson <snelson@pensando.io> Reviewed-by: Martin Habets <mhabets@solarflare.com> changes from v9: fixup a forward declaration changes from v9: more leftovers from v3 change changes from v8: fix up a missing direct call to timeout rebased on net-next changes from v7: fixup leftovers from v3 change changes from v6: fix typo in rtl driver changes from v5: add missing files (allow any net device argument name) changes from v4: add a missing driver header changes from v3: change queue # to unsigned Changes from v2: added headers Changes from v1: Fix errors found by kbuild: generalize the pattern a bit, to pick up a couple of instances missed by the previous version. Signed-off-by: David S. Miller <davem@davemloft.net> | |||
| 2019-12-09 | treewide: Use sizeof_field() macro | Pankaj Bharadiya | |
| Replace all the occurrences of FIELD_SIZEOF() with sizeof_field() except at places where these are defined. Later patches will remove the unused definition of FIELD_SIZEOF(). This patch is generated using following script: EXCLUDE_FILES="include/linux/stddef.h|include/linux/kernel.h" git grep -l -e "\bFIELD_SIZEOF\b" | while read file; do if [[ "$file" =~ $EXCLUDE_FILES ]]; then continue fi sed -i -e 's/\bFIELD_SIZEOF\b/sizeof_field/g' $file; done Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Link: https://lore.kernel.org/r/20190924105839.110713-3-pankaj.laxminarayan.bharadiya@intel.com Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: David Miller <davem@davemloft.net> # for net | |||
| 2019-12-08 | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net | Linus Torvalds | |
| Pull networking fixes from David Miller: 1) More jumbo frame fixes in r8169, from Heiner Kallweit. 2) Fix bpf build in minimal configuration, from Alexei Starovoitov. 3) Use after free in slcan driver, from Jouni Hogander. 4) Flower classifier port ranges don't work properly in the HW offload case, from Yoshiki Komachi. 5) Use after free in hns3_nic_maybe_stop_tx(), from Yunsheng Lin. 6) Out of bounds access in mqprio_dump(), from Vladyslav Tarasiuk. 7) Fix flow dissection in dsa TX path, from Alexander Lobakin. 8) Stale syncookie timestampe fixes from Guillaume Nault. [ Did an evil merge to silence a warning introduced by this pull - Linus ] * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits) r8169: fix rtl_hw_jumbo_disable for RTL8168evl net_sched: validate TCA_KIND attribute in tc_chain_tmplt_add() r8169: add missing RX enabling for WoL on RTL8125 vhost/vsock: accept only packets with the right dst_cid net: phy: dp83867: fix hfs boot in rgmii mode net: ethernet: ti: cpsw: fix extra rx interrupt inet: protect against too small mtu values. gre: refetch erspan header from skb->data after pskb_may_pull() pppoe: remove redundant BUG_ON() check in pppoe_pernet tcp: Protect accesses to .ts_recent_stamp with {READ,WRITE}_ONCE() tcp: tighten acceptance of ACKs not matching a child socket tcp: fix rejected syncookies due to stale timestamps lpc_eth: kernel BUG on remove tcp: md5: fix potential overestimation of TCP option space net: sched: allow indirect blocks to bind to clsact in TC net: core: rename indirect block ingress cb function net-sysfs: Call dev_hold always in netdev_queue_add_kobject net: dsa: fix flow dissection on Tx path net/tls: Fix return values to avoid ENOTSUPP net: avoid an indirect call in ____sys_recvmsg() ... | |||
| 2019-12-05 | s390/qeth: fix dangling IO buffers after halt/clear | Julian Wiedmann | |
| The cio layer's intparm logic does not align itself well with how qeth manages cmd IOs. When an active IO gets terminated via halt/clear, the corresponding IRQ's intparm does not reflect the cmd buffer but rather the intparm that was passed to ccw_device_halt() / ccw_device_clear(). This behaviour was recently clarified in commit b91d9e67e50b ("s390/cio: fix intparm documentation"). As a result, qeth_irq() currently doesn't cancel a cmd that was terminated via halt/clear. This primarily causes us to leak card->read_cmd after the qeth device is removed, since our IO path still holds a refcount for this cmd. For qeth this means that we need to keep track of which IO is pending on a device ('active_cmd'), and use this as the intparm when calling halt/clear. Otherwise qeth_irq() can't match the subsequent IRQ to its cmd buffer. Since we now keep track of the _expected_ intparm, we can also detect any mismatch; this would constitute a bug somewhere in the lower layers. In this case cancel the active cmd - we effectively "lost" the IRQ and should not expect any further notification for this IO. Fixes: 405548959cc7 ("s390/qeth: add support for dynamically allocated cmds") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||
| 2019-12-05 | s390/qeth: ensure linear access to packet headers | Julian Wiedmann | |
| When the RX path builds non-linear skbs, the packet headers can currently spill over into page fragments. Depending on the packet type and what fields we need to access in the headers, this could cause us to go past the end of skb->data. So for non-linear packets, copy precisely the length of the necessary headers ('linear_len') into skb->data. And don't copy more, upper-level protocols will peel whatever additional packet headers they need. Fixes: 4a71df50047f ("qeth: new qeth device driver") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||
| 2019-12-05 | s390/qeth: guard against runt packets | Julian Wiedmann | |
| Depending on a packet's type, the RX path needs to access fields in the packet headers and thus requires a minimum packet length. Enforce this length when building the skb. On the other hand a single runt packet is no reason to drop the whole RX buffer. So just skip it, and continue processing on the next packet. Fixes: 4a71df50047f ("qeth: new qeth device driver") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||
| 2019-12-03 | Merge tag 's390-5.5-2' of ↵ | Linus Torvalds | |
| git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull more s390 updates from Vasily Gorbik: - Make stack unwinder reliable and suitable for livepatching. Add unwinder testing module. - Fixes for CALL_ON_STACK helper used for stack switching. - Fix unwinding from bpf code. - Fix getcpu and remove compat support in vdso code. - Fix address space control registers initialization. - Save KASLR offset for early dumps. - Handle new FILTERED_BY_HYPERVISOR reply code in crypto code. - Minor perf code cleanup and potential memory leak fix. - Add couple of error messages for corner cases during PCI device creation. * tag 's390-5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (33 commits) s390: remove compat vdso code s390/livepatch: Implement reliable stack tracing for the consistency model s390/unwind: add stack pointer alignment sanity checks s390/unwind: filter out unreliable bogus %r14 s390/unwind: start unwinding from reliable state s390/test_unwind: add program check context tests s390/test_unwind: add irq context tests s390/test_unwind: print verbose unwinding results s390/test_unwind: add CALL_ON_STACK tests s390: fix register clobbering in CALL_ON_STACK s390/test_unwind: require that unwinding ended successfully s390/unwind: add a test for the internal API s390/unwind: always inline get_stack_pointer s390/pci: add error message on device number limit s390/pci: add error message for UID collision s390/cpum_sf: Check for SDBT and SDB consistency s390/cpum_sf: Use TEAR_REG macro consistantly s390/cpum_sf: Remove unnecessary check for pending SDBs s390/cpum_sf: Replace function name in debug statements s390/kaslr: store KASLR offset for early dumps ... | |||
| 2019-12-02 | Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi | Linus Torvalds | |
| Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: aacraid, ufs, zfcp, NCR5380, lpfc, qla2xxx, smartpqi, hisi_sas, target, mpt3sas, pm80xx plus a whole load of minor updates and fixes. The major core changes are Al Viro's reworking of sg's handling of copy to/from user, Ming Lei's removal of the host busy counter to avoid contention in the multiqueue case and Damien Le Moal's fixing of residual tracking across error handling" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (251 commits) scsi: bnx2fc: timeout calculation invalid for bnx2fc_eh_abort() scsi: target: core: Fix a pr_debug() argument scsi: iscsi: Don't send data to unbound connection scsi: target: iscsi: Wait for all commands to finish before freeing a session scsi: target: core: Release SPC-2 reservations when closing a session scsi: target: core: Document target_cmd_size_check() scsi: bnx2i: fix potential use after free Revert "scsi: qla2xxx: Fix memory leak when sending I/O fails" scsi: NCR5380: Add disconnect_mask module parameter scsi: NCR5380: Unconditionally clear ICR after do_abort() scsi: NCR5380: Call scsi_set_resid() on command completion scsi: scsi_debug: num_tgts must be >= 0 scsi: lpfc: use hdwq assigned cpu for allocation scsi: arcmsr: fix indentation issues scsi: qla4xxx: fix double free bug scsi: pm80xx: Modified the logic to collect fatal dump scsi: pm80xx: Tie the interrupt name to the module instance scsi: pm80xx: Controller fatal error through sysfs scsi: pm80xx: Do not request 12G sas speeds scsi: pm80xx: Cleanup command when a reset times out ... | |||
| 2019-12-01 | Merge tag 'compat-ioctl-5.5' of ↵ | Linus Torvalds | |
| git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground Pull removal of most of fs/compat_ioctl.c from Arnd Bergmann: "As part of the cleanup of some remaining y2038 issues, I came to fs/compat_ioctl.c, which still has a couple of commands that need support for time64_t. In completely unrelated work, I spent time on cleaning up parts of this file in the past, moving things out into drivers instead. After Al Viro reviewed an earlier version of this series and did a lot more of that cleanup, I decided to try to completely eliminate the rest of it and move it all into drivers. This series incorporates some of Al's work and many patches of my own, but in the end stops short of actually removing the last part, which is the scsi ioctl handlers. I have patches for those as well, but they need more testing or possibly a rewrite" * tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (42 commits) scsi: sd: enable compat ioctls for sed-opal pktcdvd: add compat_ioctl handler compat_ioctl: move SG_GET_REQUEST_TABLE handling compat_ioctl: ppp: move simple commands into ppp_generic.c compat_ioctl: handle PPPIOCGIDLE for 64-bit time_t compat_ioctl: move PPPIOCSCOMPRESS to ppp_generic compat_ioctl: unify copy-in of ppp filters tty: handle compat PPP ioctls compat_ioctl: move SIOCOUTQ out of compat_ioctl.c compat_ioctl: handle SIOCOUTQNSD af_unix: add compat_ioctl support compat_ioctl: reimplement SG_IO handling compat_ioctl: move WDIOC handling into wdt drivers fs: compat_ioctl: move FITRIM emulation into file systems gfs2: add compat_ioctl support compat_ioctl: remove unused convert_in_user macro compat_ioctl: remove last RAID handling code compat_ioctl: remove /dev/raw ioctl translation compat_ioctl: remove PCI ioctl translation compat_ioctl: remove joystick ioctl translation ... | |||
| 2019-11-30 | s390/zcrypt: handle new reply code FILTERED_BY_HYPERVISOR | Harald Freudenberger | |
| This patch introduces support for a new architectured reply code 0x8B indicating that a hypervisor layer (if any) has rejected an ap message. Linux may run as a guest on top of a hypervisor like zVM or KVM. So the crypto hardware seen by the ap bus may be restricted by the hypervisor for example only a subset like only clear key crypto requests may be supported. Other requests will be filtered out - rejected by the hypervisor. The new reply code 0x8B will appear in such cases and needs to get recognized by the ap bus and zcrypt device driver zoo. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> | |||
| 2019-11-25 | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next | Linus Torvalds | |
| Pull networking updates from David Miller: "Another merge window, another pull full of stuff: 1) Support alternative names for network devices, from Jiri Pirko. 2) Introduce per-netns netdev notifiers, also from Jiri Pirko. 3) Support MSG_PEEK in vsock/virtio, from Matias Ezequiel Vara Larsen. 4) Allow compiling out the TLS TOE code, from Jakub Kicinski. 5) Add several new tracepoints to the kTLS code, also from Jakub. 6) Support set channels ethtool callback in ena driver, from Sameeh Jubran. 7) New SCTP events SCTP_ADDR_ADDED, SCTP_ADDR_REMOVED, SCTP_ADDR_MADE_PRIM, and SCTP_SEND_FAILED_EVENT. From Xin Long. 8) Add XDP support to mvneta driver, from Lorenzo Bianconi. 9) Lots of netfilter hw offload fixes, cleanups and enhancements, from Pablo Neira Ayuso. 10) PTP support for aquantia chips, from Egor Pomozov. 11) Add UDP segmentation offload support to igb, ixgbe, and i40e. From Josh Hunt. 12) Add smart nagle to tipc, from Jon Maloy. 13) Support L2 field rewrite by TC offloads in bnxt_en, from Venkat Duvvuru. 14) Add a flow mask cache to OVS, from Tonghao Zhang. 15) Add XDP support to ice driver, from Maciej Fijalkowski. 16) Add AF_XDP support to ice driver, from Krzysztof Kazimierczak. 17) Support UDP GSO offload in atlantic driver, from Igor Russkikh. 18) Support it in stmmac driver too, from Jose Abreu. 19) Support TIPC encryption and auth, from Tuong Lien. 20) Introduce BPF trampolines, from Alexei Starovoitov. 21) Make page_pool API more numa friendly, from Saeed Mahameed. 22) Introduce route hints to ipv4 and ipv6, from Paolo Abeni. 23) Add UDP segmentation offload to cxgb4, Rahul Lakkireddy" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1857 commits) libbpf: Fix usage of u32 in userspace code mm: Implement no-MMU variant of vmalloc_user_node_flags slip: Fix use-after-free Read in slip_open net: dsa: sja1105: fix sja1105_parse_rgmii_delays() macvlan: schedule bc_work even if error enetc: add support Credit Based Shaper(CBS) for hardware offload net: phy: add helpers phy_(un)lock_mdio_bus mdio_bus: don't use managed reset-controller ax88179_178a: add ethtool_op_get_ts_info() mlxsw: spectrum_router: Fix use of uninitialized adjacency index mlxsw: spectrum_router: After underlay moves, demote conflicting tunnels bpf: Simplify __bpf_arch_text_poke poke type handling bpf: Introduce BPF_TRACE_x helper for the tracing tests bpf: Add bpf_jit_blinding_enabled for !CONFIG_BPF_JIT bpf, testing: Add various tail call test cases bpf, x86: Emit patchable direct jump as tail call bpf: Constant map key tracking for prog array pokes bpf: Add poke dependency tracking for prog array maps bpf: Add initial poke descriptor table for jit images bpf: Move owner type, jited info into array auxiliary data ... | |||
| 2019-11-25 | Merge tag 's390-5.5-1' of ↵ | Linus Torvalds | |
| git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Vasily Gorbik: - Adjust PMU device drivers registration to avoid WARN_ON and few other perf improvements. - Enhance tracing in vfio-ccw. - Few stack unwinder fixes and improvements, convert get_wchan custom stack unwinding to generic api usage. - Fixes for mm helpers issues uncovered with tests validating architecture page table helpers. - Fix noexec bit handling when hardware doesn't support it. - Fix memleak and unsigned value compared with zero bugs in crypto code. Minor code simplification. - Fix crash during kdump with kasan enabled kernel. - Switch bug and alternatives from asm to asm_inline to improve inlining decisions. - Use 'depends on cc-option' for MARCH and TUNE options in Kconfig, add z13s and z14 ZR1 to TUNE descriptions. - Minor head64.S simplification. - Fix physical to logical CPU map for SMT. - Several cleanups in qdio code. - Other minor cleanups and fixes all over the code. * tag 's390-5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (41 commits) s390/cpumf: Adjust registration of s390 PMU device drivers s390/smp: fix physical to logical CPU map for SMT s390/early: move access registers setup in C code s390/head64: remove unnecessary vdso_per_cpu_data setup s390/early: move control registers setup in C code s390/kasan: support memcpy_real with TRACE_IRQFLAGS s390/crypto: Fix unsigned variable compared with zero s390/pkey: use memdup_user() to simplify code s390/pkey: fix memory leak within _copy_apqns_from_user() s390/disassembler: don't hide instruction addresses s390/cpum_sf: Assign error value to err variable s390/cpum_sf: Replace function name in debug statements s390/cpum_sf: Use consistant debug print format for sampling s390/unwind: drop unnecessary code around calling ftrace_graph_ret_addr() s390: add error handling to perf_callchain_kernel s390: always inline current_stack_pointer() s390/mm: add mm_pxd_folded() checks to pxd_free() s390/mm: properly clear _PAGE_NOEXEC bit when it is not supported s390/mm: simplify page table helpers for large entries s390/mm: make pmd/pud_bad() report large entries as bad ... | |||
| 2019-11-25 | Merge tag 'for-5.5/disk-revalidate-20191122' of git://git.kernel.dk/linux-block | Linus Torvalds | |
| Pull disk revalidation updates from Jens Axboe: "This continues the work that Jan Kara started to thoroughly cleanup and consolidate how we handle rescans and revalidations" * tag 'for-5.5/disk-revalidate-20191122' of git://git.kernel.dk/linux-block: block: move clearing bd_invalidated into check_disk_size_change block: remove (__)blkdev_reread_part as an exported API block: fix bdev_disk_changed for non-partitioned devices block: move rescan_partitions to fs/block_dev.c block: merge invalidate_partitions into rescan_partitions block: refactor rescan_partitions | |||
| 2019-11-22 | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net | Jakub Kicinski | |
| Minor conflict in drivers/s390/net/qeth_l2_main.c, kept the lock from commit c8183f548902 ("s390/qeth: fix potential deadlock on workqueue flush"), removed the code which was removed by commit 9897d583b015 ("s390/qeth: consolidate some duplicated HW cmd code"). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> | |||
 |
index : linux.git | |
| Unnamed repository; edit this file 'description' to name the repository. |
| summaryrefslogtreecommitdiff |