summaryrefslogtreecommitdiff
path: root/drivers/s390
AgeCommit message (Collapse)Author
2009-03-26[S390] dasd: enable compat ioctlsHeiko Carstens
All of the ioctls are compatible. Just enable them. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-03-26[S390] Automatic IPL after dumpFrank Munzert
Provide new shutdown action "dump_reipl" for automatic ipl after dump. Signed-off-by: Frank Munzert <munzert@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-03-25qeth: fix wait_event_timeout handlingHeiko Carstens
wait_event_timeout just takes the numnber of jiffies to wait as an argument. That value does not include jiffies itself. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-25qeth: check for completion of a running recoveryUrsula Braun
When a recovery is started for a qeth device, additional invocations to change a mac address, to configure a VLAN interface on top, or to add multicast addresses should wait till recovery is finished, otherwise recovery might fail. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-25qeth: unregister MAC addresses during recovery.Klaus-Dieter Wacker
qeth: Unregister MAC addresses from device (layer 2) during recovery cycle. When the device is set online the MAC addresses are registered again on the device. Signed-off-by: Klaus-Dieter Wacker <kdwacker@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-25qeth: remove EDDPFrank Blaschka
Performance measurements showed EDDP does not lower CPU costs but increase them. So we dump out EDDP code from qeth driver. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-25qeth: add statistics for tx csumFrank Blaschka
Add statistics counter for software tx checksumming. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-25qeth: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24sysfs: only allow one scheduled removal callback per kobjAlex Chiang
The only way for a sysfs attribute to remove itself (without deadlock) is to use the sysfs_schedule_callback() interface. Vegard Nossum discovered that a poorly written sysfs ->store callback can repeatedly schedule remove callbacks on the same device over and over, e.g. $ while true ; do echo 1 > /sys/devices/.../remove ; done If the 'remove' attribute uses the sysfs_schedule_callback API and also does not protect itself from concurrent accesses, its callback handler will be called multiple times, and will eventually attempt to perform operations on a freed kobject, leading to many problems. Instead of requiring all callers of sysfs_schedule_callback to implement their own synchronization, provide the protection in the infrastructure. Now, sysfs_schedule_callback will only allow one scheduled callback per kobject. On subsequent calls with the same kobject, return -EAGAIN. This is a short term fix. The long term fix is to allow sysfs attributes to remove themselves directly, without any of this callback hokey pokey. [cornelia.huck@de.ibm.com: s390 ccwgroup bits] Reported-by: vegard.nossum@gmail.com Signed-off-by: Alex Chiang <achiang@hp.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24Driver core: Fix device_move() vs. dpm list ordering, v2Cornelia Huck
dpm_list currently relies on the fact that child devices will be registered after their parents to get a correct suspend order. Using device_move() however destroys this assumption, as an already registered device may be moved under a newly registered one. This patch adds a new argument to device_move(), allowing callers to specify how dpm_list should be adapted. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24Driver core: implement uevent suppress in kobjectMing Lei
This patch implements uevent suppress in kobject and removes it from struct device, based on the following ideas: 1,Uevent sending should be one attribute of kobject, so suppressing it in kobject layer is more natural than in device layer. By this way, we can do it for other objects embedded with kobject. 2,It may save several bytes for each instance of struct device.(On my omap3(32bit ARM) based box, can save 8bytes per device object) This patch also introduces dev_set|get_uevent_suppress() helpers to set and query uevent_suppress attribute in case to help kobject as private part of struct device in future. [This version is against the latest driver-core patch set of Greg,please ignore the last version.] Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24s390: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers
Cc: schwidefsky@de.ibm.com Cc: linux-s390@vger.kernel.org Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
2009-03-24claw: fix minor findings from code analysis toolAndrew H. Richter
This patch fixes two problems in the claw driver identified by static code analysis: o Change in case differentiation of received sense codes o Use correct data length in claw hard_start_xmit routine Signed-off-by: Andrew H. Richter <richtera@us.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24ctcm: fix minor findings from code analysis toolJoel A. Fowler
From: Ursula Braun <ursula.braun@de.ibm.com> This patch fixes problems in the ctcm driver identified by static code analysis: o remove an unnecessary always true condition in ctcm_unpack_skb o remove duplicate assignment in ctc_mpc_alloc_channel o remove an unnecessary always true condition in ctcmpc_send_sweep_resp o remove duplicate initialization in ctcmpc_unpack_skb o shorten if condition in mpc_action_go_inop o remove INOP event if mpc group is undefined in mpc_action_doxid7 Signed-off-by: Joel A. Fowler <fowlerja@us.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24ctcm: avoid wraparound in length of incoming dataRoel Kluin
Since the receive code should tolerate any incoming garbage, it should be protected against a potential wraparound when manipulating length values within incoming data. block_len is unsigned, so a too large subtraction will cause a wraparound. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24ctcm: invalid return code from hard_start_xmitUrsula Braun
Avoid kernel warning by using the correct hard_start_xmit return code NETDEV_TX_BUSY for skb requeuing. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24claw: invalid return codes from hard_start_xmitUrsula Braun
Avoid kernel warnings by using the correct hard_start_xmit return code NETDEV_TX_BUSY for skb requeuing. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24netiucv: invalid return code from hard_start_xmitUrsula Braun
Avoid kernel warning by using the correct hard_start_xmit return code NETDEV_TX_BUSY for skb requeuing. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24lcs: invalid return codes from hard_start_xmit.Klaus-Dieter Wacker
Lcs hard_start_xmit routine issued return codes other than defined for this interface. Now lcs returns only either NETDEV_TX_OK or NETDEV_TX_BUSY. Signed-off-by: Klaus-Dieter Wacker <kdwacker@de.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24Use kthread instead of kernel_threadKlaus-Dieter Wacker
Lcs uses low-level kernel_thread implementation. All drivers should use <linux/kthread.h> API instead. Signed-off-by: Klaus-Dieter Wacker <kdwacker@de.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-12[SCSI] zfcp: Report fc_host_port_type as NPIVChristof Schmitt
Report the fc_host_port_type as FC_PORTTYPE_NPIV when the subchannel is running in NPIV mode. This allows to see the correct type with lsscsi -H -t --list Acked-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] zfcp: Ensure all work is cancelled on adapter dequeueSwen Schillig
A scheduled work might still be pending, running while the adapter is in progress to get dequeued from the system. This can lead to an invalid pointer dereference (Oops). Once the adpater is set online again, ensure the nameserver environment is initialized to the appropriate values again. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] zfcp: fix queue, scheduled work processing.Swen Schillig
Ensure the refcounting is correct even if we were not able to schedule a work. In addition we have to make sure no scheduled work is pending while we're dequeing the adapter from the systems environment. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] zfcp: erp failed status bit will not be setMartin Petermann
It will not be necessary to set the erp failed status bit in case a SCSI device is removed by the SCSI mid layer. In the case a SCSI device is unavailable for a short time (15 to 20 seconds) a FCP unit will not get on-line again. Signed-off-by: Martin Petermann <martin@linux.vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] zfcp: Block FC transport rports early on errorsChristof Schmitt
Use the I/O blocking mechanism in the FC transport class to allow faster failovers for multipathing: - Call fc_remote_port_delete early to set the rport to BLOCKED. - Check the rport status in queuecommand with fc_remote_portchkready to no longer accept new I/O for this port and fail the I/O with the appropriate scsi_cmnd result. - Implement the terminate_rport_io handler to abort all pending I/O requests - Return SCSI commands with DID_TRANSPORT_DISRUPTED while erp is running. - When updating the remote port status, check for late changes and update the remote ports status accordingly. Acked-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] zfcp: incorrect reaction on incoming RSCNSwen Schillig
After an error condition resolved a remote storage port was never re-opened. The incoming RSCN was not processed accordingly due to a misinterpreted status flag / return value combination. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] zfcp: Remove PCI flagChristof Schmitt
The usage of the PCI flag to trigger interrupts is optional. Even without setting the flag, qdio still receives interrupts to continue working on the queue. Remove the PCI flag from zfcp, it is not necessary. Acked-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] zfcp: replace current ERP logging with a more convenient versionSwen Schillig
The current number based id ERP logging is replaced by a string based tag version. The benefit is an easier location of the code in question and the removal of the lengthy array referencing the individual messages. The string (7 bytes) based version does not use more space since those bytes were "used" anyway due to the alignment of the structure. The encoding of the 7 byte string is as follows [0-1] = filename [2-5] = task/function [6] = section Due to the character of this string (fixed length) a string termination is not required here. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] zfcp: prevent adapter close on initial adapter openSwen Schillig
An adapter close was always performed whether it was required, (e.g. in an error scenario) or not (e.g. initial open). This patch is changing the process in only doing an adapter close when it is required. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] zfcp: remove undefined subtype for status read responseSwen Schillig
The status read response FSF_STATUS_READ_SUB_ERROR_PORT is not defined in the specs and therefore not valid. All occurrences are removed from the code. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] zfcp: Send ELS ADISC from workqueueChristof Schmitt
Issue ELS ADISC requests from workqueue. This allows the link test request to be sent when the request queue is full due to I/O load for other remote ports. It also simplifies request queue locking, zfcp_fsf_send_fcp_command_task is now the only function that has interrupts disabled from the caller. This is also a prereq for the FC passthrough support that issues ELS requests from userspace. Acked-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] zfcp: Improve reliability of SCSI eh handlers in zfcpChristof Schmitt
When the SCSI midlayer is running error recovery, the low-level error recovery in zfcp could be running and preventing the SCSI midlayer to issue error recovery requests. To avoid unnecessary error recovery escalation, wait for the zfcp erp to finish and retry if necessary. While reworking the SCSI eh handlers, alsa cleanup the code and simplify the interface from zfcp_scsi to the fsf layer. Acked-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] zfcp: Wait for free SBALs when possibleChristof Schmitt
For calls from zfcp erp, scsi_eh and sysfs switch the calls issuing FSF requests to zfcp_fsf_req_sbal_get to wait for free SBALs. Acked-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] zfcp: Only increment req_id for successfully issued requestsChristof Schmitt
Only increment the req_id for successfully issued requests. This avoids some confusion when debugging issued fsf requests. Acked-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] zfcp: Simplify latency lock handlingChristof Schmitt
The lock only needs to protect the softirq context called from qdio against the userspace context called from sysfs. spin_lock and spin_lock_bh is enough. Acked-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] zfcp: add measurement data for average qdio queue utilisationMartin Peschke
Provide measurement data for the utilisation of the QDIO outbound queue. The additional value allows to calculate an average queue utilisation by looking at the deltas per time unit. Needed for capacity planning. It is up to user space to handle wrap-arounds of the 64 bit value. The new counter neatly complements the existing counter for queue full conditions. That is why, both statistics counter have been integrated. Signed-off-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] zfcp: Remove UNIT_REGISTERED status flagChristof Schmitt
Use the device pointer in zfcp_unit for tracking if we have a registered SCSI device. With this approach, the flag ZFCP_STATUS_UNIT_REGISTERED is only redundant and can be removed. Acked-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] zfcp: Remove some port flagsChristof Schmitt
PORT_PHYS_CLOSING is only set and cleared, but not actually used for status checking. PORT_INVALID_WWPN is set when the GID_PN request does not return a d_id for a remote port, e.g. when a remote port has been unplugged. For this case, the d_id is zero. In the erp we can check the d_id and use the normal escalation procedure that gives up after three retries and remove the special case. PORT_NO_WWPN is unused: Each port in the remote port list has a valid wwpn. The WKA ports are now tracked outside the port list. Remove the PORT_NO_WWPN flag, since this is no longer set for any port. Acked-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] Remove SUGGEST flagsMartin K. Petersen
The SUGGEST_* flags in the SCSI command result have been out of fashion for a while and we don't actually use them in the error handling. Remove the remaining occurrences. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-02-24Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller
2009-02-19[S390] fix "mem=" handling in case of standby memoryHeiko Carstens
Standby memory detected with the sclp interface gets always registered with add_memory calls without considering the limitationt that the "mem=" kernel paramater implies. So fix this and only register standby memory that is below the specified limit. This fixes zfcpdump since it uses "mem=32M". In case there is appr. 2GB standby memory present all of usable memory would be used for the struct pages needed for standby memory. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-02-19[S390] sclp: handle empty event buffersPeter Oberparleiter
Handle a malformed hardware response which some versions of the Support Element (SE) may present during SE restart and which otherwise would result in an endless loop in function sclp_dispatch_evbufs. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-02-14Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller
Conflicts: drivers/net/wireless/iwlwifi/iwl-agn.c drivers/net/wireless/iwlwifi/iwl3945-base.c
2009-02-11[S390] dasd: fix race in dasd timer handlingStefan Weinhuber
In dasd_device_set_timer and dasd_block_set_timer we interpret the return value of mod_timer in a wrong way. If the timer expires in the small window between our check of timer_pending and the call to mod_timer, then the timer will be set, mod_timer returns zero and we will call add_timer for a timer that is already pending. As del_timer and mod_timer do all the necessary checking themselves, we can simplify our code and remove the race a the same time. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-02-11[S390] dasd: bus_id -> dev_name() conversion.Cornelia Huck
bus_id usage crept in again; fix it. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-26Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2009-01-25kmsg: convert claw printk messagesAndy Richter
claw printks are converted to dev_xxx and pr_xxx macros. Signed-off-by: Andy Richter <richtera@us.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-25lcs: fix compilation for !CONFIG_IP_MULTICASTHeiko Carstens
drivers/s390/net/lcs.c: In function 'lcs_new_device': drivers/s390/net/lcs.c:2179: error: implicit declaration of function 'lcs_set_multicast_list' Reported-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21claw: convert to net_device_opsFrank Blaschka
claw convert to net_device_ops. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21netiucv: convert to net_device_opsFrank Blaschka
netiucv convert to net_device_ops. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 19:44:08 +0000