summaryrefslogtreecommitdiff
path: root/drivers/s390
AgeCommit message (Collapse)Author
2017-09-19s390/cio: recover from bad pathsSebastian Ott
In some situations we don't receive notification from firmware that a previously unusable channelpath is usable again. Schedule recovery for devices that return from path verification without using all potentially usable paths. The recovery thread will periodically trigger a path verification on the affected devices. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Suggested-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-19s390/scm_blk: consistently use blk_status_t as error typeSebastian Ott
Fix these warnings found by sparse: drivers/s390/block/scm_blk.c:257:24: warning: incorrect type in assignment (different base types) drivers/s390/block/scm_blk.c:257:24: expected int [signed] <noident> drivers/s390/block/scm_blk.c:257:24: got restricted blk_status_t [usertype] error drivers/s390/block/scm_blk.c:420:33: warning: incorrect type in argument 2 (different base types) drivers/s390/block/scm_blk.c:420:33: expected restricted blk_status_t [usertype] error drivers/s390/block/scm_blk.c:420:33: got int [signed] <noident> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-13s390/dasd: fix race during dasd initializationStefan Haberland
Fix a panic in blk_mq_hctx_has_pending() that is caused by a racy call to blk_mq_run_hw_queues in a dasd function that might get called with the request queue not yet initialized during initialization. Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull more s390 updates from Martin Schwidefsky: "The second patch set for the 4.14 merge window: - Convert the dasd device driver to the blk-mq interface. - Provide three zcrypt interfaces for vfio_ap. These will be required for KVM guest access to the crypto cards attached via the AP bus. - A couple of memory management bug fixes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/dasd: blk-mq conversion s390/mm: use a single lock for the fields in mm_context_t s390/mm: fix race on mm->context.flush_mm s390/mm: fix local TLB flushing vs. detach of an mm address space s390/zcrypt: externalize AP queue interrupt control s390/zcrypt: externalize AP config info query s390/zcrypt: externalize test AP queue s390/mm: use VM_BUG_ON in crst_table_[upgrade|downgrade]
2017-09-08s390/dasd: blk-mq conversionStefan Haberland
Use new blk-mq interfaces. Use multiple queues and also use the block layer complete helper that finish the IO on the CPU that initiated it. Reviewed-by: Jan Hoeppner <hoeppner@linux.vnet.ibm.com> Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-07Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This is mostly updates of the usual suspects: lpfc, qla2xxx, hisi_sas, megaraid_sas, zfcp and a host of minor updates. The major driver change here is the elimination of the block based cciss driver in favour of the SCSI based hpsa driver (which now drives all the legacy cases cciss used to be required for). Plus a reset handler clean up and the redo of the SAS SMP handler to use bsg lib" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits) scsi: scsi-mq: Always unprepare before requeuing a request scsi: Show .retries and .jiffies_at_alloc in debugfs scsi: Improve requeuing behavior scsi: Call scsi_initialize_rq() for filesystem requests scsi: qla2xxx: Reset the logo flag, after target re-login. scsi: qla2xxx: Fix slow mem alloc behind lock scsi: qla2xxx: Clear fc4f_nvme flag scsi: qla2xxx: add missing includes for qla_isr scsi: qla2xxx: Fix an integer overflow in sysfs code scsi: aacraid: report -ENOMEM to upper layer from aac_convert_sgraw2() scsi: aacraid: get rid of one level of indentation scsi: aacraid: fix indentation errors scsi: storvsc: fix memory leak on ring buffer busy scsi: scsi_transport_sas: switch to bsg-lib for SMP passthrough scsi: smartpqi: remove the smp_handler stub scsi: hpsa: remove the smp_handler stub scsi: bsg-lib: pass the release callback through bsg_setup_queue scsi: Rework handling of scsi_device.vpd_pg8[03] scsi: Rework the code for caching Vital Product Data (VPD) scsi: rcu: Introduce rcu_swap_protected() ...
2017-09-07Merge branch 'for-4.14/block' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block layer updates from Jens Axboe: "This is the first pull request for 4.14, containing most of the code changes. It's a quiet series this round, which I think we needed after the churn of the last few series. This contains: - Fix for a registration race in loop, from Anton Volkov. - Overflow complaint fix from Arnd for DAC960. - Series of drbd changes from the usual suspects. - Conversion of the stec/skd driver to blk-mq. From Bart. - A few BFQ improvements/fixes from Paolo. - CFQ improvement from Ritesh, allowing idling for group idle. - A few fixes found by Dan's smatch, courtesy of Dan. - A warning fixup for a race between changing the IO scheduler and device remova. From David Jeffery. - A few nbd fixes from Josef. - Support for cgroup info in blktrace, from Shaohua. - Also from Shaohua, new features in the null_blk driver to allow it to actually hold data, among other things. - Various corner cases and error handling fixes from Weiping Zhang. - Improvements to the IO stats tracking for blk-mq from me. Can drastically improve performance for fast devices and/or big machines. - Series from Christoph removing bi_bdev as being needed for IO submission, in preparation for nvme multipathing code. - Series from Bart, including various cleanups and fixes for switch fall through case complaints" * 'for-4.14/block' of git://git.kernel.dk/linux-block: (162 commits) kernfs: checking for IS_ERR() instead of NULL drbd: remove BIOSET_NEED_RESCUER flag from drbd_{md_,}io_bio_set drbd: Fix allyesconfig build, fix recent commit drbd: switch from kmalloc() to kmalloc_array() drbd: abort drbd_start_resync if there is no connection drbd: move global variables to drbd namespace and make some static drbd: rename "usermode_helper" to "drbd_usermode_helper" drbd: fix race between handshake and admin disconnect/down drbd: fix potential deadlock when trying to detach during handshake drbd: A single dot should be put into a sequence. drbd: fix rmmod cleanup, remove _all_ debugfs entries drbd: Use setup_timer() instead of init_timer() to simplify the code. drbd: fix potential get_ldev/put_ldev refcount imbalance during attach drbd: new disk-option disable-write-same drbd: Fix resource role for newly created resources in events2 drbd: mark symbols static where possible drbd: Send P_NEG_ACK upon write error in protocol != C drbd: add explicit plugging when submitting batches drbd: change list_for_each_safe to while(list_first_entry_or_null) drbd: introduce drbd_recv_header_maybe_unplug ...
2017-09-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Support ipv6 checksum offload in sunvnet driver, from Shannon Nelson. 2) Move to RB-tree instead of custom AVL code in inetpeer, from Eric Dumazet. 3) Allow generic XDP to work on virtual devices, from John Fastabend. 4) Add bpf device maps and XDP_REDIRECT, which can be used to build arbitrary switching frameworks using XDP. From John Fastabend. 5) Remove UFO offloads from the tree, gave us little other than bugs. 6) Remove the IPSEC flow cache, from Florian Westphal. 7) Support ipv6 route offload in mlxsw driver. 8) Support VF representors in bnxt_en, from Sathya Perla. 9) Add support for forward error correction modes to ethtool, from Vidya Sagar Ravipati. 10) Add time filter for packet scheduler action dumping, from Jamal Hadi Salim. 11) Extend the zerocopy sendmsg() used by virtio and tap to regular sockets via MSG_ZEROCOPY. From Willem de Bruijn. 12) Significantly rework value tracking in the BPF verifier, from Edward Cree. 13) Add new jump instructions to eBPF, from Daniel Borkmann. 14) Rework rtnetlink plumbing so that operations can be run without taking the RTNL semaphore. From Florian Westphal. 15) Support XDP in tap driver, from Jason Wang. 16) Add 32-bit eBPF JIT for ARM, from Shubham Bansal. 17) Add Huawei hinic ethernet driver. 18) Allow to report MD5 keys in TCP inet_diag dumps, from Ivan Delalande. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1780 commits) i40e: point wb_desc at the nvm_wb_desc during i40e_read_nvm_aq i40e: avoid NVM acquire deadlock during NVM update drivers: net: xgene: Remove return statement from void function drivers: net: xgene: Configure tx/rx delay for ACPI drivers: net: xgene: Read tx/rx delay for ACPI rocker: fix kcalloc parameter order rds: Fix non-atomic operation on shared flag variable net: sched: don't use GFP_KERNEL under spin lock vhost_net: correctly check tx avail during rx busy polling net: mdio-mux: add mdio_mux parameter to mdio_mux_init() rxrpc: Make service connection lookup always check for retry net: stmmac: Delete dead code for MDIO registration gianfar: Fix Tx flow control deactivation cxgb4: Ignore MPS_TX_INT_CAUSE[Bubble] for T6 cxgb4: Fix pause frame count in t4_get_port_stats cxgb4: fix memory leak tun: rename generic_xdp to skb_xdp tun: reserve extra headroom only when XDP is set net: dsa: bcm_sf2: Configure IMP port TC2QOS mapping net: dsa: bcm_sf2: Advertise number of egress queues ...
2017-09-06s390/zcrypt: externalize AP queue interrupt controlHarald Freudenberger
KVM has a need to control the interrupts on real and virtualized AP queue devices. This fix provides a new function to control the interrupt facilities of an AP queue device. Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-06s390/zcrypt: externalize AP config info queryHarald Freudenberger
KVM has a need to fetch the crypto configuration information as it is returned by the PQAP(QCI) instruction. This patch introduces a new API ap_query_configuration() which provides this info in a handy way for the caller. Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-06s390/zcrypt: externalize test AP queueTony Krowiak
Under certain specified conditions, the Test AP Queue (TAPQ) subfunction of the Process Adjunct Processor Queue (PQAP) instruction will be intercepted by a guest VM. The guest VM must have a means for executing the intercepted instruction. The vfio_ap driver will provide an interface to execute the PQAP(TAPQ) instruction subfunction on behalf of a guest VM. The code for executing the AP instructions currently resides in the AP bus. This patch refactors the AP bus code to externalize access to the PQAP(TAPQ) instruction subfunction to make it available to the vfio_ap driver. Signed-off-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com> Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-05Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Martin Schwidefsky: "The first part of the s390 updates for 4.14: - Add machine type 0x3906 for IBM z14 - Add IBM z14 TLB flushing improvements for KVM guests - Exploit the TOD clock epoch extension to provide a continuous TOD clock afer 2042/09/17 - Add NIAI spinlock hints for IBM z14 - Rework the vmcp driver and use CMA for the respone buffer of z/VM CP commands - Drop some s390 specific asm headers and use the generic version - Add block discard for DASD-FBA devices under z/VM - Add average request times to DASD statistics - A few of those constify patches which seem to be in vogue right now - Cleanup and bug fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (50 commits) s390/mm: avoid empty zero pages for KVM guests to avoid postcopy hangs s390/dasd: Add discard support for FBA devices s390/zcrypt: make CPRBX const s390/uaccess: avoid mvcos jump label s390/mm: use generic mm_hooks s390/facilities: fix typo s390/vmcp: simplify vmcp_response_free() s390/topology: Remove the unused parent_node() macro s390/dasd: Change unsigned long long to unsigned long s390/smp: convert cpuhp_setup_state() return code to zero on success s390: fix 'novx' early parameter handling s390/dasd: add average request times to dasd statistics s390/scm: use common completion path s390/pci: log changes to uid checking s390/vmcp: simplify vmcp_ioctl() s390/vmcp: return -ENOTTY for unknown ioctl commands s390/vmcp: split vmcp header file and move to uapi s390/vmcp: make use of contiguous memory allocator s390/cpcmd,vmcp: avoid GFP_DMA allocations s390/vmcp: fix uaccess check and avoid undefined behavior ...
2017-09-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Three cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-31Merge tag 'vfio-ccw-20170724' of ↵Martin Schwidefsky
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/vfio-ccw into fixes Pull vfio-ccw fix from Cornelia Huck: "A bugfix in the ccw translation code."
2017-08-29s390/dasd: Add discard support for FBA devicesJan Höppner
The z/VM hypervisor provides virtual disks (VDISK) which are backed by main memory of the hypervisor. Those devices are seen as DASD FBA disks within the Linux guest. Whenever data is written to such a device, memory is allocated on-the-fly by z/VM accordingly. This memory, however, is not being freed if data on the device is deleted by the guest OS. In order to make memory usable after deletion again, add discard support to the FBA discipline. While at it, update comments regarding the DASD_FEATURE_* flags. Reviewed-by: Stefan Haberland <sth@linux.vnet.ibm.com> Signed-off-by: Jan Höppner <hoeppner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-08-29s390/zcrypt: make CPRBX constBhumika Goyal
Make this const as it is only used in a copy operation. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-08-29s390/vmcp: simplify vmcp_response_free()Heiko Carstens
Get rid of the goto and "out" label within vmcp_response_free() which I added. This just makes the code harder to read than necessary. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-08-23block: replace bi_bdev with a gendisk pointer and partitions indexChristoph Hellwig
This way we don't need a block_device structure to submit I/O. The block_device has different life time rules from the gendisk and request_queue and is usually only available when the block device node is open. Other callers need to explicitly create one (e.g. the lightnvm passthrough code, or the new nvme multipathing code). For the actual I/O path all that we need is the gendisk, which exists once per block device. But given that the block layer also does partition remapping we additionally need a partition index, which is used for said remapping in generic_make_request. Note that all the block drivers generally want request_queue or sometimes the gendisk, so this removes a layer of indirection all over the stack. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-23s390/dasd: Change unsigned long long to unsigned longJan Höppner
Unsigned long long and unsigned long were different in size for 31-bit. For 64-bit the size for both datatypes is 8 Bytes and since the support for 31-bit is long gone we can clean up a little and change everything to unsigned long. Change get_phys_clock() along the way to accept unsigned long as well so that the DASD code can be consistent. Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Jan Höppner <hoeppner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-08-23s390/dasd: add average request times to dasd statisticsStefan Haberland
Add average times to the DASD statistics interface. Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-08-18s390/qeth: use skb_cow_head() for L2 OSA xmitJulian Wiedmann
Taking a full copy via skb_realloc_headroom() on every xmit is overkill and wastes CPU time; all we actually need is to push on the qeth_hdr. So rework the L2 OSA TX path to avoid the copy. Minor complications arise because struct qeth_hdr must not cross a page boundary. So add a new helper qeth_push_hdr() that catches this, and falls back to the hdr cache that we already use for IQDs. This change uncovered that qeth's TX completion takes rather long. Now that we no longer free the original skb straight away and thus call skb->destructor later than before, throughput regresses significantly. For now, restore old behaviour by adding an explicit skb_orphan(), and a big TODO to improve the TX completion time. Tested-by: Nils Hoppmann <niho@de.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18s390/qeth: unify code to build header elementsJulian Wiedmann
After plenty of refactoring, use hd_len as single indication that the skb needs a dedicated header element. This preserves existing behaviour for TSO, as 'hdr' always points to skb->data. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18s390/qeth: pass full IQD header length to fill_buffer()Julian Wiedmann
This is a prerequisite for unifying the code to build header elements. The TSO header has a different size, so we can no longer rely on implicitly adding the size of a normal qeth_hdr. No functional change. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18s390/qeth: pass TSO data offset to fill_buffer()Julian Wiedmann
For TSO we need to skip the skb's qeth/IP/TCP headers when mapping it into buffer elements. Instead of (mis)using skb_pull(), pass a corresponding offset to fill_buffer() like we already do for IQDs. No actual change in the resulting TSO buffers. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18s390/qeth: pass TSO header length to fill_buffer()Julian Wiedmann
The TSO code already calculates the length of its header element, no need to duplicate this in the low-level code again. Use this opportunity to make hd_len unsigned, and for TSO match its calculation to what tso_fill_header() does. No functional change. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18s390/qeth: pass full data length to l2_fill_header()Julian Wiedmann
For IQD we already need to fix up the qeth_hdr's length field, and future changes will require more flexibility for OSA as well. The device-specific path knows best what header length it requires, so just pass it from there. While at it, remove the unused qeth_card parameter. No functional change. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18s390/qeth: split L2 xmit pathsJulian Wiedmann
l2_hard_start_xmit() actually doesn't contain much shared code, and having device-specific paths makes isolated changes a lot easier. So split it into three routines for IQD, OSN and OSD/OSM/OSX. No functional change. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15s390/qeth: fix using of ref counter for rxip addressesKittipon Meesompop
IP-address setting and removal are delayed when the device is not yet in state SOFTSETUP or UP. ref_counter has been implemented only for ip-address with type normal. In this patch ref_counter logic is also used for ip-address with type rxip to allow appropriate handling of multiple postponed rxip add and del calls. Signed-off-by: Kittipon Meesompop <kmeesomp@linux.vnet.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15s390/qeth: fix trace-messages for deleting rxip addressesKittipon Meesompop
change trace-messages: - from addrxip4 to delrxip4 - from addrxip6 to delrxip6 Signed-off-by: Kittipon Meesompop <kmeesomp@linux.vnet.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15s390/qeth: reject multicast rxip addressesKittipon Meesompop
There exist different commands to add unicast and multicast addresses on the OSA card. rxip addresses are always set as unicast addresses and thus just unicast addresses should be allowed. Adding a multicast address now fails and a grace message is generated. Signed-off-by: Kittipon Meesompop <kmeesomp@linux.vnet.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15s390/qeth: extract bridgeport cmd builderJulian Wiedmann
Consolidation of duplicated code, no functional change. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15s390/net: reduce inliningJulian Wiedmann
Clean up the inline cruft in s390 net drivers. Many of the inlined functions had only one caller anyway. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15s390/qeth: make more use of skb APIJulian Wiedmann
Replace some open-coded parts with their proper API calls. Also remove two skb_[re]set_mac_header() calls in the L2 xmit paths that are clearly no longer required, since at least commit 6d1ccff62780 ("net: reset mac header in dev_start_xmit()"). Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Acked-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15s390/qeth: clean up fill_buffer() offset logicJulian Wiedmann
For some xmit paths we pass down a data offset to qeth_fill_buffer(), to indicate that the first k bytes of the skb should be skipped when mapping it into buffer elements. Commit acd9776b5c45 ("s390/qeth: no ETH header for outbound AF_IUCV") recently switched the offset for the IUCV-over-HiperSockets path from 0 to ETH_HLEN, and now we have device offset OSA = 0 IQD > 0 for all xmit paths. OSA would previously pass down -1 from do_send_packet(), to distinguish between 1) OSA and 2) IQD with offset 0. That's no longer needed now, so have it pass 0, make the offset unsigned and clean up how we apply the offset in __qeth_fill_buffer(). No change of behaviour for any of our current xmit paths. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Acked-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15s390/qeth: straighten out fill_buffer() interfaceJulian Wiedmann
1. for adjusting the buffer's next_element_to_fill in __fill_buffer(), just pass the full qeth_qdio_out_buffer struct 2. when adding a header element, be consistent about passing a hint ('is_first_elem') to __fill_buffer() No functional change. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Acked-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15s390/qeth: simplify fragment type selectionJulian Wiedmann
Improve readability of the code that determines a buffer element's fragment type, and reduce the number of cases down from 5 to 3. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Acked-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15s390/qeth: remove extra L3 adapterparms queryJulian Wiedmann
qeth_l3_setadapter_parms() queries the device for supported adapterparms, even though they already have been queried as part of the device's high-level setup. Remove that extra call. The only call chain for qeth_l3_setadapter_parms() is __qeth_l3_set_online() qeth_core_hardsetup_card() qeth_query_setadapterparms() qeth_l3_setadapter_parms() qeth_query_setadapterparms() , and we only reach qeth_l3_setadapter_parms() if the first adapterparms query succeeds. Hence removing the second query results in no loss of functionality. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Acked-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15s390/qeth: remove extra L2 adapterparms queryJulian Wiedmann
qeth_l2_request_initial_mac() queries the device for its supported adapterparms, even though they already have been queried as part of the device's high-level setup. Remove that extra call. The only call chain for qeth_l2_request_initial_mac() is __qeth_l2_set_online() qeth_core_hardsetup_card() qeth_query_setadapterparms() qeth_l2_setup_netdev() qeth_l2_request_initial_mac() qeth_query_setadapterparms() , and we only reach qeth_l2_request_initial_mac() if the first adapterparms query succeeds. Hence removing the second query results in no loss of functionality. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Acked-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15s390/qeth: don't access skb after transmissionJulian Wiedmann
After transmitting a skb via send_packet[_fast](), the statistics code accesses the skb once more to account for transmitted page frags. This has a (theoretical?) race against the TX completion - if the TX completion is processed and frees the skb before hard_start_xmit() gets to the statistics part, we access random memory. Fix this by caching the # of page frags, before the skb is transmitted. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Acked-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-10scsi: zfcp: early returns for traces disabled via levelMartin Peschke
This patch adds early checks to avoid burning CPU cycles on the assembly of trace entries which would be skipped anyway. Introduce a static const variable to keep the trace level to check with debug_level_enabled() in sync with the actual trace emit with debug_event(). In order not to refactor the SAN tracing too much, simply use a define instead. This change is only for the non / semi hot paths, while the actual (I/O) hot path was already improved earlier: zfcp_dbf_scsi() is already guarded by its only caller _zfcp_dbf_scsi() since commit dcd20e2316cd ("[SCSI] zfcp: Only collect SCSI debug data for matching trace levels"). zfcp_dbf_hba_fsf_res() is already guarded by its only caller zfcp_dbf_hba_fsf_response() since commit 2e261af84cdb ("[SCSI] zfcp: Only collect FSF/HBA debug data for matching trace levels"). Signed-off-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> [maier@linux.vnet.ibm.com: rebase, reword, default level 3 branch prediction] Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com> Signed-off-by: Benjamin Block <bblock@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-10scsi: zfcp: clean up unnecessary module_param_named() with no_auto_port_rescanMartin Peschke
Improves commit 43f60cbd56c4 ("[SCSI] zfcp: No automatic port_rescan on events") Signed-off-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> [maier@linux.vnet.ibm.com: reword, underscore in description to match sysfs] Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com> Signed-off-by: Benjamin Block <bblock@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-10scsi: zfcp: clean up a member of struct zfcp_qdio that was assigned but ↵Martin Peschke
never used v2.6.38 commit a54ca0f62f95 ("[SCSI] zfcp: Redesign of the debug tracing for HBA records.") dropped trace information previously introduced with v2.6.27 commit c3baa9a26c5a ("[SCSI] zfcp: Add information about interrupt to trace.") but kept and needlessly assigned a now no longer used struct field. Signed-off-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> [maier@linux.vnet.ibm.com: reword, added git history] Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com> Signed-off-by: Benjamin Block <bblock@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-10scsi: zfcp: clean up no longer existent prototype from zfcp API headerSteffen Maier
Commit a54ca0f62f95 ("[SCSI] zfcp: Redesign of the debug tracing for HBA records.") refactored zfcp_dbf_hba_berr into zfcp_dbf_hba_bit_err but added the prototype for the latter without removing it for the former. Suggested-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com> Signed-off-by: Benjamin Block <bblock@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-10scsi: zfcp: clean up redundant code with fall through in link down SRB ↵Martin Peschke
switch case Signed-off-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> [maier@linux.vnet.ibm.com: re-worded short description for more details] Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com> Signed-off-by: Benjamin Block <bblock@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-10scsi: zfcp: fix kernel doc comment typos for struct zfcp_dbf_scsiSteffen Maier
Improves commit 250a1352b95e ("[SCSI] zfcp: Redesign of the debug tracing for SCSI records.") Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com> Signed-off-by: Benjamin Block <bblock@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-10scsi: zfcp: use endianness conversions with common FC(P) struct fieldsSteffen Maier
Just to silence sparse. Since zfcp only exists for s390 and s390 is big endian, this has been working correctly without conversions and all the new conversions are NOPs so no performance impact. Nonetheless, use the conversion on the constant expression where possible. NB: N_Port-IDs have always been handled with hton24 or ntoh24 conversions because they also convert to / from character array. Affected common code structs and .fields are: HOT I/O PATH: fcp_cmnd .fc_dl FCP command: regular SCSI I/O, including DIX case SEMI-HOT I/O PATH: fcp_cmnd .fc_dl recovery FCP command: task management function (LUN / target reset) fcp_resp_ext FCP response having FCP_SNS_LEN_VAL with .fr_rsp_len .fr_sns_len FCP response having FCP_RESID_UNDER with .fr_resid RECOVERY / DISCOVERY PATHS: fc_ct_hdr .ct_cmd .ct_mr_size zfcp auto port scan [GPN_FT] with fc_gpn_ft_resp.fp_wwpn, recovery for returned port [GID_PN] with fc_ns_gid_pn.fn_wwpn, get symbolic port name [GSPN], register symbolic port name [RSPN] (NPIV only). fc_els_rscn .rscn_plen incoming ELS (RSCN). fc_els_flogi .fl_wwpn .fl_wwnn incoming ELS (PLOGI), port open response with .fl_csp.sp_bb_data .fl_cssp[0..3].cp_class, FCP channel physical port, point-to-point peer (P2P only). fc_els_logo .fl_n_port_wwn incoming ELS (LOGO). fc_els_adisc .adisc_wwnn .adisc_wwpn path test after RSCN for gone target port. Since v4.10 commit 05de97003c77 ("linux/types.h: enable endian checks for all sparse builds"), below sparse endianness reports appear by default. Previously, one needed to pass argument CF="-D__CHECK_ENDIAN__" to make as in: $ make C=1 CF="-D__CHECK_ENDIAN__" M=drivers/s390/scsi. Silenced sparse warnings and one error: $ make C=1 M=drivers/s390/scsi ... CHECK drivers/s390/scsi/zfcp_dbf.c drivers/s390/scsi/zfcp_dbf.c:463:22: warning: restricted __be16 degrades to integer drivers/s390/scsi/zfcp_dbf.c:476:28: warning: restricted __be16 degrades to integer CC drivers/s390/scsi/zfcp_dbf.o ... CHECK drivers/s390/scsi/zfcp_fc.c drivers/s390/scsi/zfcp_fc.c:263:26: warning: restricted __be16 degrades to integer drivers/s390/scsi/zfcp_fc.c:299:41: warning: incorrect type in argument 2 (different base types) drivers/s390/scsi/zfcp_fc.c:299:41: expected unsigned long long [unsigned] [usertype] wwpn drivers/s390/scsi/zfcp_fc.c:299:41: got restricted __be64 [usertype] fl_wwpn drivers/s390/scsi/zfcp_fc.c:309:40: warning: incorrect type in argument 2 (different base types) drivers/s390/scsi/zfcp_fc.c:309:40: expected unsigned long long [unsigned] [usertype] wwpn drivers/s390/scsi/zfcp_fc.c:309:40: got restricted __be64 [usertype] fl_n_port_wwn drivers/s390/scsi/zfcp_fc.c:338:31: warning: restricted __be16 degrades to integer drivers/s390/scsi/zfcp_fc.c:355:24: warning: incorrect type in assignment (different base types) drivers/s390/scsi/zfcp_fc.c:355:24: expected restricted __be16 [usertype] ct_cmd drivers/s390/scsi/zfcp_fc.c:355:24: got unsigned short [unsigned] [usertype] cmd drivers/s390/scsi/zfcp_fc.c:356:28: warning: incorrect type in assignment (different base types) drivers/s390/scsi/zfcp_fc.c:356:28: expected restricted __be16 [usertype] ct_mr_size drivers/s390/scsi/zfcp_fc.c:356:28: got int drivers/s390/scsi/zfcp_fc.c:379:36: warning: incorrect type in assignment (different base types) drivers/s390/scsi/zfcp_fc.c:379:36: expected restricted __be64 [usertype] fn_wwpn drivers/s390/scsi/zfcp_fc.c:379:36: got unsigned long long [unsigned] [usertype] wwpn drivers/s390/scsi/zfcp_fc.c:463:18: warning: restricted __be64 degrades to integer drivers/s390/scsi/zfcp_fc.c:465:17: warning: cast from restricted __be64 drivers/s390/scsi/zfcp_fc.c:473:20: warning: incorrect type in assignment (different base types) drivers/s390/scsi/zfcp_fc.c:473:20: expected unsigned long long [unsigned] [usertype] wwnn drivers/s390/scsi/zfcp_fc.c:473:20: got restricted __be64 [usertype] fl_wwnn drivers/s390/scsi/zfcp_fc.c:474:29: warning: incorrect type in assignment (different base types) drivers/s390/scsi/zfcp_fc.c:474:29: expected unsigned int [unsigned] [usertype] maxframe_size drivers/s390/scsi/zfcp_fc.c:474:29: got restricted __be16 [usertype] sp_bb_data drivers/s390/scsi/zfcp_fc.c:476:30: warning: restricted __be16 degrades to integer drivers/s390/scsi/zfcp_fc.c:478:30: warning: restricted __be16 degrades to integer drivers/s390/scsi/zfcp_fc.c:480:30: warning: restricted __be16 degrades to integer drivers/s390/scsi/zfcp_fc.c:482:30: warning: restricted __be16 degrades to integer drivers/s390/scsi/zfcp_fc.c:500:28: warning: incorrect type in assignment (different base types) drivers/s390/scsi/zfcp_fc.c:500:28: expected unsigned long long [unsigned] [usertype] wwnn drivers/s390/scsi/zfcp_fc.c:500:28: got restricted __be64 [usertype] adisc_wwnn drivers/s390/scsi/zfcp_fc.c:502:38: warning: restricted __be64 degrades to integer drivers/s390/scsi/zfcp_fc.c:541:40: warning: incorrect type in assignment (different base types) drivers/s390/scsi/zfcp_fc.c:541:40: expected restricted __be64 [usertype] adisc_wwpn drivers/s390/scsi/zfcp_fc.c:541:40: got unsigned long long [unsigned] [usertype] port_name drivers/s390/scsi/zfcp_fc.c:542:40: warning: incorrect type in assignment (different base types) drivers/s390/scsi/zfcp_fc.c:542:40: expected restricted __be64 [usertype] adisc_wwnn drivers/s390/scsi/zfcp_fc.c:542:40: got unsigned long long [unsigned] [usertype] node_name drivers/s390/scsi/zfcp_fc.c:669:16: warning: restricted __be16 degrades to integer drivers/s390/scsi/zfcp_fc.c:696:24: warning: restricted __be64 degrades to integer drivers/s390/scsi/zfcp_fc.c:699:54: warning: incorrect type in argument 2 (different base types) drivers/s390/scsi/zfcp_fc.c:699:54: expected unsigned long long [unsigned] [usertype] <noident> drivers/s390/scsi/zfcp_fc.c:699:54: got restricted __be64 [usertype] fp_wwpn CC drivers/s390/scsi/zfcp_fc.o CHECK drivers/s390/scsi/zfcp_fsf.c drivers/s390/scsi/zfcp_fsf.c:479:34: warning: incorrect type in assignment (different base types) drivers/s390/scsi/zfcp_fsf.c:479:34: expected unsigned long long [unsigned] [usertype] port_name drivers/s390/scsi/zfcp_fsf.c:479:34: got restricted __be64 [usertype] fl_wwpn drivers/s390/scsi/zfcp_fsf.c:480:34: warning: incorrect type in assignment (different base types) drivers/s390/scsi/zfcp_fsf.c:480:34: expected unsigned long long [unsigned] [usertype] node_name drivers/s390/scsi/zfcp_fsf.c:480:34: got restricted __be64 [usertype] fl_wwnn drivers/s390/scsi/zfcp_fsf.c:506:36: warning: incorrect type in assignment (different base types) drivers/s390/scsi/zfcp_fsf.c:506:36: expected unsigned long long [unsigned] [usertype] peer_wwpn drivers/s390/scsi/zfcp_fsf.c:506:36: got restricted __be64 [usertype] fl_wwpn drivers/s390/scsi/zfcp_fsf.c:507:36: warning: incorrect type in assignment (different base types) drivers/s390/scsi/zfcp_fsf.c:507:36: expected unsigned long long [unsigned] [usertype] peer_wwnn drivers/s390/scsi/zfcp_fsf.c:507:36: got restricted __be64 [usertype] fl_wwnn drivers/s390/scsi/zfcp_fc.h:269:46: warning: restricted __be32 degrades to integer drivers/s390/scsi/zfcp_fc.h:270:29: error: incompatible types in comparison expression (different base types) Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com> Signed-off-by: Benjamin Block <bblock@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-10scsi: zfcp: use common code fcp_cmnd and fcp_resp with union in ↵Steffen Maier
fsf_qtcb_bottom_io This eases crash dump analysis by automatically dissecting these protocol headers at least somewhat rather than getting a string interpretation of large unstructured character array buffer fields. Also, we can get rid of some unnecessary and error-prone type casts. This change is possible since v2.6.33 commit 4318e08c84e4 ("[SCSI] zfcp: Update FCP protocol related code"). Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com> Signed-off-by: Benjamin Block <bblock@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-10scsi: zfcp: clarify that we don't need "link" test on failed open portSteffen Maier
Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com> Signed-off-by: Benjamin Block <bblock@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-10scsi: zfcp: more fitting constant for fc_ct_hdr.ct_reason on port scan responseSteffen Maier
v2.6.33 commit dbf5dfe9dbce ("[SCSI] zfcp: Use common code definitions for FC CT structs") replaced own definitions with common code definitions. While FC_BA_RJT_UNABLE happens to be defined with the same value 9 as FC_FS_RJT_UNABL and thus also works, here we should use the latter from fc_gs.h. See also its use in libfc's fc_disc_gpn_ft_resp(). Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com> Signed-off-by: Benjamin Block <bblock@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-10scsi: zfcp: trace high part of "new" 64 bit SCSI LUNSteffen Maier
Complements debugging aspects of the otherwise functionally complete v3.17 commit 9cb78c16f5da ("scsi: use 64-bit LUNs"). While I don't have access to a target exporting 3 or 4 level LUNs, I did test it by explicitly attaching a non-existent fake 4 level LUN by means of zfcp sysfs attribute "unit_add". In order to see corresponding trace records of otherwise successful events, we had to increase the trace level of area SCSI and HBA to 6. $ echo 6 > /sys/kernel/debug/s390dbf/zfcp_0.0.1880_scsi/level $ echo 6 > /sys/kernel/debug/s390dbf/zfcp_0.0.1880_hba/level $ echo 0x4011402240334044 > \ /sys/bus/ccw/drivers/zfcp/0.0.1880/0x50050763031bd327/unit_add Example output formatted by an updated zfcpdbf from the s390-tools package interspersed with kernel messages at scsi_logging_level=4605: Timestamp : ... Area : REC Subarea : 00 Level : 1 Exception : - CPU ID : .. Caller : 0x... Record ID : 1 Tag : scsla_1 LUN : 0x4011402240334044 WWPN : 0x50050763031bd327 D_ID : 0x00...... Adapter status : 0x5400050b Port status : 0x54000001 LUN status : 0x41000000 Ready count : 0x00000001 Running count : 0x00000000 ERP want : 0x01 ERP need : 0x01 scsi 2:0:0:4630896905707208721: scsi scan: INQUIRY pass 1 length 36 scsi 2:0:0:4630896905707208721: scsi scan: INQUIRY successful with code 0x0 Timestamp : ... Area : HBA Subarea : 00 Level : 6 Exception : - CPU ID : .. Caller : 0x... Record ID : 1 Tag : fs_norm Request ID : 0x<inquiry2-req-id> Request status : 0x00000010 FSF cmnd : 0x00000001 FSF sequence no: 0x... FSF issued : ... FSF stat : 0x00000000 FSF stat qual : 00000000 00000000 00000000 00000000 Prot stat : 0x00000001 Prot stat qual : ........ ........ 00000000 00000000 Port handle : 0x... LUN handle : 0x... | Timestamp : ... Area : SCSI Subarea : 00 Level : 6 Exception : - CPU ID : .. Caller : 0x... Record ID : 1 Tag : rsl_nor Request ID : 0x<inquiry2-req-id> SCSI ID : 0x00000000 SCSI LUN : 0x40224011 SCSI LUN high : 0x40444033 <======================= SCSI result : 0x00000000 SCSI retries : 0x00 SCSI allowed : 0x03 SCSI scribble : 0x<inquiry2-req-id> SCSI opcode : 12000000 a4000000 00000000 00000000 FCP rsp inf cod: 0x00 FCP rsp IU : 00000000 00000000 00000000 00000000 00000000 00000000 scsi 2:0:0:4630896905707208721: scsi scan: INQUIRY pass 2 length 164 scsi 2:0:0:4630896905707208721: scsi scan: INQUIRY successful with code 0x0 scsi 2:0:0:4630896905707208721: scsi scan: peripheral device type of 31, \ no device added Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Fixes: 9cb78c16f5da ("scsi: use 64-bit LUNs") Cc: <stable@vger.kernel.org> #3.17+ Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com> Reviewed-by: Jens Remus <jremus@linux.vnet.ibm.com> Signed-off-by: Benjamin Block <bblock@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-28 09:36:45 +0000