summaryrefslogtreecommitdiff
path: root/drivers/s390
AgeCommit message (Collapse)Author
2017-02-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Martin Schwidefsky: - New entropy generation for the pseudo random number generator. - Early boot printk output via sclp to help debug crashes on boot. This needs to be enabled with a kernel parameter. - Add proper no-execute support with a bit in the page table entry. - Bug fixes and cleanups. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (65 commits) s390/syscall: fix single stepped system calls s390/zcrypt: make ap_bus explicitly non-modular s390/zcrypt: Removed unneeded debug feature directory creation. s390: add missing "do {} while (0)" loop constructs to multiline macros s390/mm: add cond_resched call to kernel page table dumper s390: get rid of MACHINE_HAS_PFMF and MACHINE_HAS_HPAGE s390/mm: make memory_block_size_bytes available for !MEMORY_HOTPLUG s390: replace ACCESS_ONCE with READ_ONCE s390: Audit and remove any remaining unnecessary uses of module.h s390: mm: Audit and remove any unnecessary uses of module.h s390: kernel: Audit and remove any unnecessary uses of module.h s390/kdump: Use "LINUX" ELF note name instead of "CORE" s390: add no-execute support s390: report new vector facilities s390: use correct input data address for setup_randomness s390/sclp: get rid of common response code handling s390/sclp: don't add new lines to each printed string s390/sclp: make early sclp code readable s390/sclp: disable early sclp code as soon as the base sclp driver is active s390/sclp: move early printk code to drivers ...
2017-02-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Highlights: 1) Support TX_RING in AF_PACKET TPACKET_V3 mode, from Sowmini Varadhan. 2) Simplify classifier state on sk_buff in order to shrink it a bit. From Willem de Bruijn. 3) Introduce SIPHASH and it's usage for secure sequence numbers and syncookies. From Jason A. Donenfeld. 4) Reduce CPU usage for ICMP replies we are going to limit or suppress, from Jesper Dangaard Brouer. 5) Introduce Shared Memory Communications socket layer, from Ursula Braun. 6) Add RACK loss detection and allow it to actually trigger fast recovery instead of just assisting after other algorithms have triggered it. From Yuchung Cheng. 7) Add xmit_more and BQL support to mvneta driver, from Simon Guinot. 8) skb_cow_data avoidance in esp4 and esp6, from Steffen Klassert. 9) Export MPLS packet stats via netlink, from Robert Shearman. 10) Significantly improve inet port bind conflict handling, especially when an application is restarted and changes it's setting of reuseport. From Josef Bacik. 11) Implement TX batching in vhost_net, from Jason Wang. 12) Extend the dummy device so that VF (virtual function) features, such as configuration, can be more easily tested. From Phil Sutter. 13) Avoid two atomic ops per page on x86 in bnx2x driver, from Eric Dumazet. 14) Add new bpf MAP, implementing a longest prefix match trie. From Daniel Mack. 15) Packet sample offloading support in mlxsw driver, from Yotam Gigi. 16) Add new aquantia driver, from David VomLehn. 17) Add bpf tracepoints, from Daniel Borkmann. 18) Add support for port mirroring to b53 and bcm_sf2 drivers, from Florian Fainelli. 19) Remove custom busy polling in many drivers, it is done in the core networking since 4.5 times. From Eric Dumazet. 20) Support XDP adjust_head in virtio_net, from John Fastabend. 21) Fix several major holes in neighbour entry confirmation, from Julian Anastasov. 22) Add XDP support to bnxt_en driver, from Michael Chan. 23) VXLAN offloads for enic driver, from Govindarajulu Varadarajan. 24) Add IPVTAP driver (IP-VLAN based tap driver) from Sainath Grandhi. 25) Support GRO in IPSEC protocols, from Steffen Klassert" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1764 commits) Revert "ath10k: Search SMBIOS for OEM board file extension" net: socket: fix recvmmsg not returning error from sock_error bnxt_en: use eth_hw_addr_random() bpf: fix unlocking of jited image when module ronx not set arch: add ARCH_HAS_SET_MEMORY config net: napi_watchdog() can use napi_schedule_irqoff() tcp: Revert "tcp: tcp_probe: use spin_lock_bh()" net/hsr: use eth_hw_addr_random() net: mvpp2: enable building on 64-bit platforms net: mvpp2: switch to build_skb() in the RX path net: mvpp2: simplify MVPP2_PRS_RI_* definitions net: mvpp2: fix indentation of MVPP2_EXT_GLOBAL_CTRL_DEFAULT net: mvpp2: remove unused register definitions net: mvpp2: simplify mvpp2_bm_bufs_add() net: mvpp2: drop useless fields in mvpp2_bm_pool and related code net: mvpp2: remove unused 'tx_skb' field of 'struct mvpp2_tx_queue' net: mvpp2: release reference to txq_cpu[] entry after unmapping net: mvpp2: handle too large value in mvpp2_rx_time_coal_set() net: mvpp2: handle too large value handling in mvpp2_rx_pkts_coal_set() net: mvpp2: remove useless arguments in mvpp2_rx_{pkts, time}_coal_set ...
2017-02-21Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This update includes the usual round of major driver updates (ncr5380, ufs, lpfc, be2iscsi, hisi_sas, storvsc, cxlflash, aacraid, megaraid_sas, ...). There's also an assortment of minor fixes and the major update of switching a bunch of drivers to pci_alloc_irq_vectors from Christoph" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (188 commits) scsi: megaraid_sas: handle dma_addr_t right on 32-bit scsi: megaraid_sas: array overflow in megasas_dump_frame() scsi: snic: switch to pci_irq_alloc_vectors scsi: megaraid_sas: driver version upgrade scsi: megaraid_sas: Change RAID_1_10_RMW_CMDS to RAID_1_PEER_CMDS and set value to 2 scsi: megaraid_sas: Indentation and smatch warning fixes scsi: megaraid_sas: Cleanup VD_EXT_DEBUG and SPAN_DEBUG related debug prints scsi: megaraid_sas: Increase internal command pool scsi: megaraid_sas: Use synchronize_irq to wait for IRQs to complete scsi: megaraid_sas: Bail out the driver load if ld_list_query fails scsi: megaraid_sas: Change build_mpt_mfi_pass_thru to return void scsi: megaraid_sas: During OCR, if get_ctrl_info fails do not continue with OCR scsi: megaraid_sas: Do not set fp_possible if TM capable for non-RW syspdIO, change fp_possible to bool scsi: megaraid_sas: Remove unused pd_index from megasas_build_ld_nonrw_fusion scsi: megaraid_sas: megasas_return_cmd does not memset IO frame to zero scsi: megaraid_sas: max_fw_cmds are decremented twice, remove duplicate scsi: megaraid_sas: update can_queue only if the new value is less scsi: megaraid_sas: Change max_cmd from u32 to u16 in all functions scsi: megaraid_sas: set pd_after_lb from MR_BuildRaidContext and initialize pDevHandle to MR_DEVHANDLE_INVALID scsi: megaraid_sas: latest controller OCR capability from FW before sending shutdown DCMD ...
2017-02-20s390/zcrypt: make ap_bus explicitly non-modularPaul Gortmaker
The Makefile in drivers/s390 has: obj-y += cio/ block/ char/ crypto/ net/ scsi/ virtio/ and the Makefile in crypto/ has: ap-objs := ap_bus.o ap_card.o ap_queue.o meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. Also note that MODULE_ALIAS is a no-op for non-module builds. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. We replace module.h with moduleparam.h since the file does declare some module parameters even though it is not modular itself. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-02-20s390/zcrypt: Removed unneeded debug feature directory creation.Harald Freudenberger
The ap bus code and the zcrypt api had invocations to the debug feature debugfs_create_dir() call but never populated these directories in any way. Removed this unneeded code. Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-02-17Merge branch 'for-4.11/next' into for-4.11/linus-mergeJens Axboe
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2017-02-11Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Six fairly small fixes. None is a real show stopper, two automation detected problems: one memory leak, one use after free and four others each of which fixes something that has been a significant source of annoyance to someone" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: zfcp: fix use-after-free by not tracing WKA port open/close on failed send scsi: aacraid: Fix INTx/MSI-x issue with older controllers scsi: mpt3sas: disable ASPM for MPI2 controllers scsi: mpt3sas: Force request partial completion alignment scsi: qla2xxx: Avoid that issuing a LIP triggers a kernel crash scsi: qla2xxx: Fix a recently introduced memory leak
2017-02-09Merge remote-tracking branch 'mkp-scsi/4.10/scsi-fixes' into fixesJames Bottomley
2017-02-09scsi: zfcp: fix use-after-free by not tracing WKA port open/close on failed sendSteffen Maier
Dan Carpenter kindly reported: <quote> The patch d27a7cb91960: "zfcp: trace on request for open and close of WKA port" from Aug 10, 2016, leads to the following static checker warning: drivers/s390/scsi/zfcp_fsf.c:1615 zfcp_fsf_open_wka_port() warn: 'req' was already freed. drivers/s390/scsi/zfcp_fsf.c 1609 zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT); 1610 retval = zfcp_fsf_req_send(req); 1611 if (retval) 1612 zfcp_fsf_req_free(req); ^^^ Freed. 1613 out: 1614 spin_unlock_irq(&qdio->req_q_lock); 1615 if (req && !IS_ERR(req)) 1616 zfcp_dbf_rec_run_wka("fsowp_1", wka_port, req->req_id); ^^^^^^^^^^^ Use after free. 1617 return retval; 1618 } Same thing for zfcp_fsf_close_wka_port() as well. </quote> Rather than relying on req being NULL (or ERR_PTR) for all cases where we don't want to trace or should not trace, simply check retval which is unconditionally initialized with -EIO != 0 and it can only become 0 on successful retval = zfcp_fsf_req_send(req). With that we can also remove the then again unnecessary unconditional initialization of req which was introduced with that earlier commit. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Suggested-by: Benjamin Block <bblock@linux.vnet.ibm.com> Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Fixes: d27a7cb91960 ("zfcp: trace on request for open and close of WKA port") Cc: <stable@vger.kernel.org> #2.6.38+ Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com> Reviewed-by: Jens Remus <jremus@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-08s390/sclp: get rid of common response code handlingHeiko Carstens
Get rid of common response code handling. Each command requires its own response code handling anyway. Also the retry in case of -EBUSY does not work and can be simply removed. Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-02-08s390/sclp: don't add new lines to each printed stringHeiko Carstens
The early vt220 sclp printk code added an extra new line to each printed multi-line text. If used for the early sclp console this will lead to numerous extra new lines. Therefore get rid of this semantic and require that each to be printed string contains a line feed character if a new line is wanted. Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-02-08s390/sclp: make early sclp code readableHeiko Carstens
This patch - unifies the old sclp early code and the sclp early printk code, so they can use common functions - makes sure all sclp early functions and variables have the same "sclp_early" prefix - converts the sclp early printk code into readable code by using existing data structures instead of hard coded magic arrays - splits the early sclp code into two files: sclp_early.c and sclp_early_core.c. The core file contains everything that is required by the kernel decompressor and may not call functions not contained within the core file. Otherwise the result would be a link error. - changes interrupt handling to be completely synchronous. The old early sclp code had a small window which allowed to receive several interrupts instead of exactly the single expected interrupt. This did hide a subtle potential bug, which is fixed with this large rework. - contains a couple of small cleanups. Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-02-08s390/sclp: disable early sclp code as soon as the base sclp driver is activeHeiko Carstens
Make sure the early sclp code does not generate any sclp requests anymore as soon as the base sclp driver is active. Otherwise both drivers may see unexpected requests or may miss expected interrupts. Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-02-08s390/sclp: move early printk code to driversHeiko Carstens
Move the early sclp printk code to the drivers folder where also the rest of the sclp code can be found. This way it is possible to use the sclp private header files for further cleanups. Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-02-06scsi: remove eh_timed_out methods in the transport templateChristoph Hellwig
Instead define the timeout behavior purely based on the host_template eh_timed_out method and wire up the existing transport implementations in the host templates. This also clears up the confusion that the transport template method overrides the host template one, so some drivers have to re-override the transport template one. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-03s390/qdio: improve some debug printsJulian Wiedmann
With multiple input queues, these DBFs turned out to be not very helpful... Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-02-03s390/qdio: fix up tiqdio_thinint_handler() kerneldocJulian Wiedmann
Missed in commit f4eae94f7137 ("s390/airq: simplify adapter interrupt code") Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Reviewed-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-02-03s390/qdio: clean up q->irq_ptr usageJulian Wiedmann
In tiqdio_call_inq_handlers(), we're looping over all input queues on the *same* irq. So instead of using the queues' back pointer, we can just access the irq directly. No functional change. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-02-03s390/qdio: clear DSCI prior to scanning multiple input queuesJulian Wiedmann
For devices with multiple input queues, tiqdio_call_inq_handlers() iterates over all input queues and clears the device's DSCI during each iteration. If the DSCI is re-armed during one of the later iterations, we therefore do not scan the previous queues again. The re-arming also raises a new adapter interrupt. But its handler does not trigger a rescan for the device, as the DSCI has already been erroneously cleared. This can result in queue stalls on devices with multiple input queues. Fix it by clearing the DSCI just once, prior to scanning the queues. As the code is moved in front of the loop, we also need to access the DSCI directly (ie irq->dsci) instead of going via each queue's parent pointer to the same irq. This is not a functional change, and a follow-up patch will clean up the other users. In practice, this bug only affects CQ-enabled HiperSockets devices, ie. devices with sysfs-attribute "hsuid" set. Setting a hsuid is needed for AF_IUCV socket applications that use HiperSockets communication. Fixes: 104ea556ee7f ("qdio: support asynchronous delivery of storage blocks") Cc: <stable@vger.kernel.org> # v3.2+ Reviewed-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-02-03s390/dcssblk: fix device size calculation in dcssblk_direct_access()Gerald Schaefer
Since commit dd22f551 "block: Change direct_access calling convention", the device size calculation in dcssblk_direct_access() is off-by-one. This results in bdev_direct_access() always returning -ENXIO because the returned value is not page aligned. Fix this by adding 1 to the dev_sz calculation. Fixes: dd22f551 ("block: Change direct_access calling convention") Cc: <stable@vger.kernel.org> # 4.0+ Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-01-31scm_blk: remove unneeded REQ_TYPE_FS checkChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-31s390/dasd: correct inconsistent indentingStefan Haberland
Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-01-31s390/dasd: check blockdevice pointer before trying to sync blockdeviceStefan Haberland
If safe offline is called for a DASD alias device a null pointer is passed to fsync_bdev. So check for existence of the blockdevice before calling fsync_bdev. Should not be a real world problem since safe offline for an alias device does not make sense and fsync_bdev can deal with a NULL pointer which it gets after successful NULL pointer dereferencing on s390. Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-01-31s390/dasd: check for device error pointer within state change interruptsStefan Haberland
Check if the device pointer is valid. Just a sanity check since we already are in the int handler of the device. Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-01-31s390/dasd: allow 0 for path_threshold attributeStefan Haberland
Allow 0 as valid input for the path_threshold attribute to deactivate the IFCC/CCC error handling. Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-01-31s390/dasd: Improve parameter list parsingJan Höppner
The function dasd_busid() still uses simple_strtoul() to convert a string to an integer value. This function is obsolete for quite some time already and should be replaced. The whole parameter parsing semantic still relies somewhat on the fact, that simple_strtoul() parses a string containing literals without complains and just returns the parsed integer value plus the residual string. kstrtoint(), however, would return -EINVAL in such a case. Since we want to get rid of simple_strtoul() and now have a nice dasd[] containing only single elements, we can clean up and simplify a few things. Replace simple_strtoul() with kstrtouint(), improve and simplify the overall parameter parsing by the following: - instead of residual strings return proper error codes - remove dasd_parse_next_element() and decide directly what sort of element is being parsed - if we parse a device or a range of devices, split that element into separate bits with a new function - remove warning about invalid ending as it doesn't apply anymore - annotate all parsing functions and data that can be freed after initialisation with __init and __initdata respectively - clean up bits and pieces while at it Reviewed-by: Stefan Haberland <sth@linux.vnet.ibm.com> Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Jan Höppner <hoeppner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-01-31s390/dasd: Always store parameter elements in an arrayJan Höppner
When the DASD driver is built into the kernel, the entire comma separated parameter list is stored as one single element in the dasd[] array, opposed to the module build where each element is stored separately in dasd[]. There is no point in doing so. Therefore, store each part of the list as single elements in dasd[] as well when built into the kernel. Also, create a define for the maximum of 256 parameters. Reviewed-by: Stefan Haberland <sth@linux.vnet.ibm.com> Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Jan Höppner <hoeppner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-01-31s390/zcrypt: use spin_lock_bh for all queue locks and unlocks.Harald Freudenberger
During tests the Kernel complained about inconsistend lock state: inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. Now all the queue locks use spin_lock_bh/spin_unlock_bh. Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-01-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Two trivial overlapping changes conflicts in MPLS and mlx5. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-19virtio/s390: virtio: constify virtio_config_ops structuresBhumika Goyal
Declare virtio_config_ops structure as const as it is only stored in the config field of a virtio_device structure. This field is of type const, so virtio_config_ops structures having this property can be declared const. Done using Coccinelle: @r1 disable optional_qualifier@ identifier i; position p; @@ static struct virtio_config_ops i@p={...}; @ok1@ identifier r1.i; position p; struct virtio_ccw_device x; @@ x.vdev.config=&i@p @bad@ position p!={r1.p,ok1.p}; identifier r1.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r1.i; @@ +const struct virtio_config_ops i; File size before and after applying the patch remains the same. text data bss dec hex filename 9235 296 32928 42459 a5db drivers/s390/virtio/virtio_ccw.o Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Message-Id: <1484333336-13443-1-git-send-email-bhumirks@gmail.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2017-01-19virtio/s390: add missing \n to end of dev_err messageColin Ian King
Trival fix, dev_err message is missing a \n, so add it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Message-Id: <20160927200844.16008-1-colin.king@canonical.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2017-01-19virtio/s390: support READ_STATUS command for virtio-ccwPierre Morel
As virtio-1 introduced the possibility of the device manipulating the status byte, revision 2 of the virtio-ccw transport introduced a means of getting the status byte from the device via READ_STATUS. Let's wire it up for revisions >= 2 and fall back to returning the stored status byte if not supported. Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2017-01-16s390/cio: remove cmf related code relevant for 31 bit onlySebastian Ott
This is a leftover from the 31 bit era to avoid 64 bit divisions. Get rid of it. Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-01-16s390: use false/true when using boolHeiko Carstens
Yet another trivial patch to reduce the noise that coccinelle generates. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-01-16s390: proper type casts for csum_partial invocationsHeiko Carstens
Keep sparse and other static code checkers from emitting warnings like: arch/s390/kernel/ipl.c:1549:14: warning: incorrect type in assignment (different base types) arch/s390/kernel/ipl.c:1549:14: expected unsigned int [unsigned] csum arch/s390/kernel/ipl.c:1549:14: got restricted __wsum All usages in s390 code are ok. Therefore add proper casts. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-01-16s390/zcore: remove unneeded linux/miscdevice.h includeCorentin Labbe
drivers/s390/char/zcore.c does not contain any miscdevice so the inclusion of linux/miscdevice.h is uncessary. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-01-16s390/cio: remove unused struct memberSebastian Ott
Remove an unused member of struct channel subsystem. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-01-16s390/cio: export real cssidSebastian Ott
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-01-16s390/cio: css initialization cleanupSebastian Ott
Simplify error handling during css initialization by moving the error handling code to setup_css (which now cleans up after itself). Also remove the odd special cleanup handling of the pseudo_subchannel. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-01-16s390/cio: css attribute cleanupSebastian Ott
Cleanup the code to handle the css device attribute. Move everything to an attribute group to let the driver core handle attribute creation and removal. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-01-16s390/cio: use cssid for pgid generationSebastian Ott
Obtain the real channel subsystem id and use that for the generation of a unique path group id. Note that this change does not affect the channel subsystem id as used in the user-visible naming of subchannels and friends. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Dong Jia Shi <bjsdjshik@linux.vnet.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-01-16s390/cio: clarify cssid usageSebastian Ott
Currently the cssid in various structures is used as the id of the respective channel subsystem. Sometimes however we call the index in the channel_subsystems array cssid. In some places the id is even used as the index. Provide a new define MAX_CSS_IDX and use it where appropriate. In addition to that provide a dummy function to find a channel subsystem by its id and a macro to iterate over the channel subsystems. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-01-16s390/zcrypt: get rid of variable length arraysHeiko Carstens
The variable length arrays used to specify clobbered memory within ap_nqap and ap_dqap would only work if the length would be known at compile time. This is not the case for both usages. Therefore simply use a full memory clobber and get rid of the old construct. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-01-16s390/zcrypt: make structures staticHeiko Carstens
Get rid of these: drivers/s390/crypto/ap_card.c:140:20: warning: symbol 'ap_card_type' was not declared. Should it be static? drivers/s390/crypto/ap_queue.c:567:20: warning: symbol 'ap_queue_type' was not declared. Should it be static? Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-01-16s390/cio: get rid of variable length arrayHeiko Carstens
Use a flexible array instead. The size of the structure is not used within chsc_sstpi, therefore no change in semantics but one less sparse warning: drivers/s390/cio/chsc.c:1219:27: warning: Variable length array is used. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-01-12s390/qeth: fix retrieval of vipa and proxy-arp addressesUrsula Braun
qeth devices in layer3 mode need a separate handling of vipa and proxy-arp addresses. vipa and proxy-arp addresses processed by qeth can be read from userspace. Introduced with commit 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback") the retrieval of vipa and proxy-arp addresses is broken, if more than one vipa or proxy-arp address are set. The qeth code used local variable "int i" for 2 different purposes. This patch now spends 2 separate local variables of type "int". While touching these functions hash_for_each_safe() is converted to hash_for_each(), since there is no removal of hash entries. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Reviewed-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Reference-ID: RQM 3524 Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-12s390/qeth: issue STARTLAN as first IPA commandJulian Wiedmann
STARTLAN needs to be the first IPA command after MPC initialization completes. So move the qeth_send_startlan() call from the layer disciplines into the core path, right after the MPC handshake. While at it, replace the magic LAN OFFLINE return code with the existing enum. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Reviewed-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-12s390/qeth: shuffle MAC management functions aroundJulian Wiedmann
Move all MAC utility functions in one place, and drop the forward declarations. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-12s390/qeth: extract qeth_l2_remove_mac()Julian Wiedmann
This matches qeth_l2_write_mac(). Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-04 22:34:02 +0000