summaryrefslogtreecommitdiff
path: root/drivers/s390
AgeCommit message (Collapse)Author
2014-09-08Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "A bug fix for the vdso code, the loadparm for booting from SCSI is added and the access permissions for the dasd module parameters are corrected" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/vdso: remove NULL pointer check from clock_gettime s390/ipl: Add missing SCSI loadparm attributes to /sys/firmware s390/dasd: Make module parameter visible in sysfs
2014-09-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix skb leak in mac802154, from Martin Townsend 2) Use select not depends on NF_NAT for NFT_NAT, from Pablo Neira Ayuso 3) Fix union initializer bogosity in vxlan, from Gerhard Stenzel 4) Fix RX checksum configuration in stmmac driver, from Giuseppe CAVALLARO 5) Fix TSO with non-accelerated VLANs in e1000, e1000e, bna, ehea, i40e, i40evf, mvneta, and qlge, from Vlad Yasevich 6) Fix capability checks in phy_init_eee(), from Giuseppe CAVALLARO 7) Try high order allocations more sanely for SKBs, specifically if a high order allocation fails, fall back directly to zero order pages rather than iterating down one order at a time. From Eric Dumazet 8) Fix a memory leak in openvswitch, from Li RongQing 9) amd-xgbe initializes wrong spinlock, from Thomas Lendacky 10) RTNL locking was busted in setsockopt for anycast and multicast, fix from Sabrina Dubroca 11) Fix peer address refcount leak in ipv6, from Nicolas Dichtel 12) DocBook typo fixes, from Masanari Iida * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (101 commits) ipv6: restore the behavior of ipv6_sock_ac_drop() amd-xgbe: Enable interrupts for all management counters amd-xgbe: Treat certain counter registers as 64 bit greth: moved TX ring cleaning to NAPI rx poll func cnic : Cleanup CONFIG_IPV6 & VLAN check net: treewide: Fix typo found in DocBook/networking.xml bnx2x: Fix link problems for 1G SFP RJ45 module 3c59x: avoid panic in boomerang_start_xmit when finding page address: netfilter: add explicit Kconfig for NETFILTER_XT_NAT ipv6: use addrconf_get_prefix_route() to remove peer addr ipv6: fix a refcnt leak with peer addr net-timestamp: only report sw timestamp if reporting bit is set drivers/net/fddi/skfp/h/skfbi.h: Remove useless PCI_BASE_2ND macros l2tp: fix race while getting PMTU on PPP pseudo-wire ipv6: fix rtnl locking in setsockopt for anycast and multicast VMXNET3: Check for map error in vmxnet3_set_mc openvswitch: distinguish between the dropped and consumed skb amd-xgbe: Fix initialization of the wrong spin lock openvswitch: fix a memory leak netfilter: fix missing dependencies in NETFILTER_XT_TARGET_LOG ...
2014-09-02qeth: don't query for info if hardware not ready.Eugene Crosser
When qeth device is queried for ethtool data, hardware operation is performed to extract the necessary information from the card. If the card is not online at the moment (e.g. it is undergoing recovery), this operation produces undesired effects like temporarily freezing the system. This patch prevents execution of the hardware query operation when the card is not online. In such case, ioctl() operation returns error with errno ENODEV. Reviewed-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com> Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-01s390/dasd: Make module parameter visible in sysfsPeter Oberparleiter
Change the visibility of the dasd parameter of kernel module dasd_mod to be consistent with the eer_pages parameter. Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Acked-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-08-15s390/sclp: remove unnecessary XTABS flagMartin Schwidefsky
The sclp line mode terminal driver scans the tty output for '\t', there is no need to set the XTABS flag in c_oflag. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-08-15s390/3215: fix tty output containing tabsMartin Schwidefsky
git commit 37f81fa1f63ad38e16125526bb2769ae0ea8d332 "n_tty: do O_ONLCR translation as a single write" surfaced a bug in the 3215 device driver. In combination this broke tab expansion for tty ouput. The cause is an asymmetry in the behaviour of tty3215_ops->write vs tty3215_ops->put_char. The put_char function scans for '\t' but the write function does not. As the driver has logic for the '\t' expansion remove XTABS from c_oflag of the initial termios as well. Reported-by: Stephen Powell <zlinuxman@wowway.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-08-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Martin Schwidefsky: "Mostly cleanups and bug-fixes, with two exceptions. The first is lazy flushing of I/O-TLBs for PCI to improve performance, the second is software dirty bits in the pmd for the madvise-free implementation" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (24 commits) s390/locking: Reenable optimistic spinning s390/mm: implement dirty bits for large segment table entries KVM: s390/mm: Fix page table locking vs. split pmd lock s390/dasd: fix camel case s390/3215: fix hanging console issue s390/irq: improve displayed interrupt order in /proc/interrupts s390/seccomp: fix error return for filtered system calls s390/pci: introduce lazy IOTLB flushing for DMA unmap dasd: fix error recovery for alias devices during format dasd: fix list_del corruption during format dasd: fix unresponsive device during format dasd: use aliases for formatted devices during format s390/pci: fix kmsg component s390/kdump: Return NOTIFY_OK for all actions other than MEM_GOING_OFFLINE s390/watchdog: Fix module name in Kconfig help text s390/dasd: replace seq_printf by seq_puts s390/dasd: replace pr_warning by pr_warn s390/dasd: Move EXPORT_SYMBOL after function/variable s390/dasd: remove unnecessary null test before debugfs_remove s390/zfcp: use qdio buffer helpers ...
2014-08-06Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This patch set consists of the usual driver updates (ufs, storvsc, pm8001 hpsa). It also has removal of the user space target driver code (everyone is using LIO now), a partial PCI MSI-X update, more multi-queue updates, conversion to 64 bit LUNs (so we could theoretically cope with any LUN returned by a device) and placeholder support for the ZBC device type (Shingle drives), plus an assortment of minor updates and bug fixes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (143 commits) scsi: do not issue SCSI RSOC command to Promise Vtrak E610f vmw_pvscsi: Use pci_enable_msix_exact() instead of pci_enable_msix() pm8001: Fix invalid return when request_irq() failed lpfc: Remove superfluous call to pci_disable_msix() isci: Use pci_enable_msix_exact() instead of pci_enable_msix() bfa: Use pci_enable_msix_exact() instead of pci_enable_msix() bfa: Cleanup bfad_setup_intr() function bfa: Do not call pci_enable_msix() after it failed once fnic: Use pci_enable_msix_exact() instead of pci_enable_msix() scsi: use short driver name for per-driver cmd slab caches scsi_debug: support scsi-mq, queues and locks Drivers: add blist flags scsi: ufs: fix endianness sparse warnings scsi: ufs: make undeclared functions static bnx2i: Update driver version to 2.7.10.1 pm8001: fix a memory leak in nvmd_resp pm8001: fix update_flash pm8001: fix a memory leak in flash_update pm8001: Cleaning up uninitialized variables pm8001: Fix to remove null pointer checks that could never happen ...
2014-08-01s390/dasd: fix camel caseStefan Haberland
Rename enable_PAV to enable_pav. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-07-28s390/3215: fix hanging console issueMartin Schwidefsky
The ccw_device_start in raw3215_start_io can fail. raw3215_try_io does not check if the request could be started and removes any pending timer. This can leave the system in a hanging state. Check for pending request after raw3215_start_io and start a timer if necessary. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-07-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/infiniband/hw/cxgb4/device.c The cxgb4 conflict was simply overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-22dasd: fix error recovery for alias devices during formatStefan Haberland
Kernel panic or a hanging device during format if an alias device is set offline or I/O errors occur. Omit the error recovery procedure for alias devices and do retries on the base device with full erp. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-07-22dasd: fix list_del corruption during formatStefan Haberland
If I/O errors occur during format a kernel panic with a list_del corruption may occur. Stop error recovery procedure after an erp action was taken. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-07-22dasd: fix unresponsive device during formatStefan Haberland
If path events occur the formatting process stucks because path events may flush format requests from the queue. Kick the format process after path events are handled. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-07-22dasd: use aliases for formatted devices during formatStefan Haberland
Formatting of a previously formatted device is slower than newly format a device when alias devices are available. For already formatted devices the alias devices are not used for formatting. Fix the alias handling for already formatted devices. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-07-22s390/dasd: replace seq_printf by seq_putsFabian Frederick
Fix checkpatch warnings: "WARNING: Prefer seq_puts to seq_printf" Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-07-22s390/dasd: replace pr_warning by pr_warnFabian Frederick
Fix checkpatch warning: "WARNING: Prefer pr_warn(... to pr_warning(..." + coalesce formats. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-07-22s390/dasd: Move EXPORT_SYMBOL after function/variableFabian Frederick
Fix checkpatch warnings: "WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable" Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-07-22s390/dasd: remove unnecessary null test before debugfs_removeFabian Frederick
This fixes checkpatch warning: "WARNING: debugfs_remove(NULL) is safe this check is probably not required" Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-07-22s390/zfcp: use qdio buffer helpersSebastian Ott
Use qdio buffer helpers to manage the buffers used for the request and response queues. No functional change. Reviewed-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-07-22s390/qeth: extract qdio buffers from output buffer structSebastian Ott
Because of the embedded qdio_buffer array struct qeth_qdio_out_q is quite large resulting in an order 4 allocation. This is likely to fail at runtime and wastes a lot of memory since the actual size is just about 34K. Since there is no need for this buffer to be contiguous split it up using qdio buffer helpers. Reported-by: Neale Ferguson <neale@sinenomine.net> Reviewed-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-07-22s390/qeth: extract qdio buffers from input buffer structSebastian Ott
Because of the embedded qdio_buffer array struct qeth_qdio_q is quite large resulting in an order 4 allocation. This is likely to fail at runtime and wastes a lot of memory since the actual size is just about 36K. Since there is no need for this buffer to be contiguous split it up using qdio buffer helpers. Reported-by: Neale Ferguson <neale@sinenomine.net> Reviewed-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-07-22s390/qeth: qdio queue helpersSebastian Ott
Get rid of duplicated code by introducing some helpers to allocate and free qdio queues used by qeth for its input and completion queue. No functional change. Reviewed-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-07-22s390/qdio: add helpers to manage qdio buffersSebastian Ott
Users of qdio buffers employ different strategies to manage these buffers. The qeth driver uses huge contiguous buffers which leads to high order allocations with all their downsides. This patch provides helpers to allocate, free, and reset arrays of qdio buffers using non contiguous pages. Reviewed-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-07-21qeth: Display adjacent switch attributesStefan Raspl
Add support to display the adjacent switch port's forwarding attributes. Currently supports info on forwarding modes '802.1' and 'rr' (reflective relay). Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com> Reviewed-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-17scsi: use 64-bit LUNsHannes Reinecke
The SCSI standard defines 64-bit values for LUNs, and large arrays employing large or hierarchical LUN numbers become more and more common. So update the linux SCSI stack to use 64-bit LUN numbers. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@infradead.org> Reviewed-by: Ewan Milne <emilne@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-16s390/zcrypt: improve device probing for zcrypt adapter cardsIngo Tuchscherer
Improve device probing process for zcrypt adapters to transmit service request during registration process. Signed-off-by: Ingo Tuchscherer <ingo.tuchscherer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-07-16s390/3270: correct size detection with the read-partition commandMartin Schwidefsky
The size detection for 3270 terminals with the read-partition command is broken. The raw3270_reset_device_cb function clears the init_data array, but if raw3270_writesf_readpart has been called the read-partition command is queued which needs the init_data array. In this case the size detection will fail and the invalid command does funny things to the terminal. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-07-15net: set name_assign_type in alloc_netdev()Tom Gundersen
Extend alloc_netdev{,_mq{,s}}() to take name_assign_type as argument, and convert all users to pass NET_NAME_UNKNOWN. Coccinelle patch: @@ expression sizeof_priv, name, setup, txqs, rxqs, count; @@ ( -alloc_netdev_mqs(sizeof_priv, name, setup, txqs, rxqs) +alloc_netdev_mqs(sizeof_priv, name, NET_NAME_UNKNOWN, setup, txqs, rxqs) | -alloc_netdev_mq(sizeof_priv, name, setup, count) +alloc_netdev_mq(sizeof_priv, name, NET_NAME_UNKNOWN, setup, count) | -alloc_netdev(sizeof_priv, name, setup) +alloc_netdev(sizeof_priv, name, NET_NAME_UNKNOWN, setup) ) v9: move comments here from the wrong commit Signed-off-by: Tom Gundersen <teg@jklm.no> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-21Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 patches from Martin Schwidefsky: "A couple of bug fixes, a debug change for qdio, an update for the default config, and one small extension. The watchdog module based on diagnose 0x288 is converted to the watchdog API and it now works under LPAR as well" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/ccwgroup: use ccwgroup_ungroup wrapper s390/ccwgroup: fix an uninitialized return code s390/ccwgroup: obtain extra reference for asynchronous processing qdio: Keep device-specific dbf entries s390/compat: correct ucontext layout for high gprs s390/cio: set device name as early as possible s390: update default configuration s390: avoid format strings leaking into names s390/airq: silence lockdep warning s390/watchdog: add support for LPAR operation (diag288) s390/watchdog: use watchdog API s390/sclp_vt220: Enable ASCII console per default s390/qdio: replace shift loop by ilog2 s390/cio: silence lockdep warning s390/uaccess: always load the kernel ASCE after task switch s390/ap_bus: Make modules parameters visible in sysfs
2014-06-16s390/ccwgroup: use ccwgroup_ungroup wrapperSebastian Ott
To ungroup and deregister the group device always use the ccwgroup_ungroup wrapper. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-06-16s390/ccwgroup: fix an uninitialized return codeSebastian Ott
Since commit 0b60f9ead5d4816e7e3d6e28f4a0d22d4a1b2513 "s390: use device_remove_file_self() instead of device_schedule_callback()" the return code of ccwgroup_ungroup_store is uninitialized. Make sure the rc is always initialized. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-06-16s390/ccwgroup: obtain extra reference for asynchronous processingSebastian Ott
Commit 0b60f9ead5d4816e7e3d6e28f4a0d22d4a1b2513 "s390: use device_remove_file_self() instead of device_schedule_callback()" changed ccwgroup to use an extra work queue instead of device_schedule_callback. This function obtained an extra device reference for its async work which is missing in the new implementation and results in a "freeing memory with a lock still held" BUG. Fix this by obtaining an extra reference for the async work. Reported-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-06-16qdio: Keep device-specific dbf entriesStefan Raspl
Keep the per-device dbf entries until module is removed, with proper error checking for debug feature setup. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Reviewed-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-06-16s390/cio: set device name as early as possibleSebastian Ott
Currently we set the device name at the time we call device_add after we receive the interrupt for the first I/O. When something is not working as expected during that first I/O (e.g. we don't receive an interrupt) we print a message including the device name which has not yet been initialized. Set the device name after calling device_initialize (prior to starting the first I/O) so that we have the name present if some unexpected error occurs during that first I/O. Reported-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reported-by: Jason J. Herne <jjherne@linux.vnet.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-06-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Seccomp BPF filters can now be JIT'd, from Alexei Starovoitov. 2) Multiqueue support in xen-netback and xen-netfront, from Andrew J Benniston. 3) Allow tweaking of aggregation settings in cdc_ncm driver, from Bjørn Mork. 4) BPF now has a "random" opcode, from Chema Gonzalez. 5) Add more BPF documentation and improve test framework, from Daniel Borkmann. 6) Support TCP fastopen over ipv6, from Daniel Lee. 7) Add software TSO helper functions and use them to support software TSO in mvneta and mv643xx_eth drivers. From Ezequiel Garcia. 8) Support software TSO in fec driver too, from Nimrod Andy. 9) Add Broadcom SYSTEMPORT driver, from Florian Fainelli. 10) Handle broadcasts more gracefully over macvlan when there are large numbers of interfaces configured, from Herbert Xu. 11) Allow more control over fwmark used for non-socket based responses, from Lorenzo Colitti. 12) Do TCP congestion window limiting based upon measurements, from Neal Cardwell. 13) Support busy polling in SCTP, from Neal Horman. 14) Allow RSS key to be configured via ethtool, from Venkata Duvvuru. 15) Bridge promisc mode handling improvements from Vlad Yasevich. 16) Don't use inetpeer entries to implement ID generation any more, it performs poorly, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1522 commits) rtnetlink: fix userspace API breakage for iproute2 < v3.9.0 tcp: fixing TLP's FIN recovery net: fec: Add software TSO support net: fec: Add Scatter/gather support net: fec: Increase buffer descriptor entry number net: fec: Factorize feature setting net: fec: Enable IP header hardware checksum net: fec: Factorize the .xmit transmit function bridge: fix compile error when compiling without IPv6 support bridge: fix smatch warning / potential null pointer dereference via-rhine: fix full-duplex with autoneg disable bnx2x: Enlarge the dorq threshold for VFs bnx2x: Check for UNDI in uncommon branch bnx2x: Fix 1G-baseT link bnx2x: Fix link for KR with swapped polarity lane sctp: Fix sk_ack_backlog wrap-around problem net/core: Add VF link state control policy net/fsl: xgmac_mdio is dependent on OF_MDIO net/fsl: Make xgmac_mdio read error message useful net_sched: drr: warn when qdisc is not work conserving ...
2014-06-11Merge tag 'virtio-next-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull virtio updates from Rusty Russell: "Main excitement is a virtio_scsi fix for alloc holding spinlock on the abort path, which I refuse to CC stable since (1) I discovered it myself, and (2) it's been there forever with no reports" * tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: virtio_scsi: don't call virtqueue_add_sgs(... GFP_NOIO) holding spinlock. virtio-rng: fixes for device registration/unregistration virtio-rng: fix boot with virtio-rng device virtio-rng: support multiple virtio-rng devices virtio_ccw: introduce device_lost in virtio_ccw_device virtio: virtio_break_device() to mark all virtqueues broken.
2014-06-11s390: avoid format strings leaking into namesKees Cook
This makes sure format strings can't accidentally leak into kernel interface names. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-06-10s390/airq: silence lockdep warningSebastian Ott
airq_iv_(alloc|free) is called by some users with interrupts enabled and by some with interrupts disabled which leads to the following lockdep warning: [ INFO: possible irq lock inversion dependency detected ] 3.14.0-15249-gbf29b7b-dirty #25 Not tainted --------------------------------------------------------- insmod/2108 just changed the state of lock: (&(&iv->lock)->rlock){+.....}, at: [<000000000046ee3e>] airq_iv_alloc+0x62/0x228 but this lock was taken by another, HARDIRQ-READ-safe lock in the past: (&info->lock){.-.-..} and interrupts could create inverse lock ordering between them. other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&(&iv->lock)->rlock); local_irq_disable(); lock(&info->lock); lock(&(&iv->lock)->rlock); <Interrupt> lock(&info->lock); *** DEADLOCK *** Although this is a false alarm (since each airq user consistently calls these functions from the same context) fix this by ensuring that interrupts are disabled when the airq lock is held. Reported-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-06-10s390/watchdog: use watchdog APIPhilipp Hachtmann
Converted the vmwatchdog driver to use the kernel's watchdog API. Signed-off-by: Philipp Hachtmann <phacht@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-06-10s390/sclp_vt220: Enable ASCII console per defaultPeter Oberparleiter
When you want to use the HMC's ASCII console as console device for a z/VM guest you have to specify console=ttyS1 on the kernel command line. But it won't work until you specify conmode=sclp as well. This behavior is inconsistent with the use of the ASCII console as TTY device which works on z/VM without the need to specify a conmode. Fix this inconsistency by removing the check for conmode=sclp in the ASCII console registration function. Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-06-10s390/qdio: replace shift loop by ilog2Fabian Frederick
account_sbals is called by get_inbound_buffer_frontier and get_outbound_buffer_frontier with 'count' value > 0 so we can safely convert shift loop to ilog2. Cc: Joe Perches <joe@perches.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-06-10s390/cio: silence lockdep warningSebastian Ott
On systems where a ccw based console device is used a lockdep false alarm could be triggered when a device driver calls printk while holding a subchannels lock (e.g. in it's irq handler). Since this is valid behavior fix this by introducing a separate lock class for the console subchannels lock. The lockdep warning was revealed by "printk: enable interrupts before calling console_trylock_for_printk()" which changed console_unlock() to be called with lockdep enabled. [ INFO: possible recursive locking detected ] 3.15.0-rc5-next-20140520 #1 Not tainted --------------------------------------------- ccwgroup/2239 is trying to acquire lock: (&(sch->lock)->rlock){-.-...}, at: [<0000000000642a52>] raw3215_write+0x52/0x200 but task is already holding lock: (&(sch->lock)->rlock){-.-...}, at: [<00000000005fd160>] do_cio_interrupt+0x60/0x108 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(sch->lock)->rlock); lock(&(sch->lock)->rlock); *** DEADLOCK *** May be due to missing lock nesting notation 8 locks held by ccwgroup/2239: stack backtrace: CPU: 3 PID: 2239 Comm: ccwgroup Not tainted 3.15.0-rc5-next-20140520 #1 0000000036fab518 0000000036fab528 0000000000000002 0000000000000000 0000000036fab5b8 0000000036fab530 0000000036fab530 00000000001116e8 0000000000000000 0000000000986ec4 00000000009701b6 000000000000000b 0000000036fab578 0000000036fab518 0000000000000000 0000000000000000 0000000000000000 00000000001116e8 0000000036fab518 0000000036fab578 Call Trace: ([<0000000000111626>] show_trace+0x14e/0x158) [<000000000011169a>] show_stack+0x6a/0xe8 [<00000000007c6e72>] dump_stack+0x82/0xb0 [<00000000001a95f2>] validate_chain.isra.37+0xa4a/0xbb0 [<00000000001acaca>] __lock_acquire+0x4da/0xcd0 [<00000000001ada1a>] lock_acquire+0xba/0x218 [<00000000007cd634>] _raw_spin_lock_irqsave+0x6c/0xb8 [<0000000000642a52>] raw3215_write+0x52/0x200 [<0000000000643d16>] con3215_write+0x76/0xf8 [<00000000001bd87a>] call_console_drivers.constprop.25+0xfa/0x210 [<00000000001be0b0>] console_unlock+0x3e0/0x4e8 [<00000000001be450>] vprintk_emit+0x298/0x6e0 [<00000000005aa210>] dev_vprintk_emit+0xe0/0x1a8 [<00000000005aa320>] dev_printk_emit+0x48/0x50 [<00000000005aa390>] __dev_printk+0x68/0xb0 [<00000000005aa7c2>] _dev_info+0x62/0x70 [<0000000000657bf0>] qeth_l2_send_setmac_cb+0xd0/0x190 [<0000000000651a1e>] qeth_send_control_data_cb+0x3a6/0x6a8 [<0000000000655546>] qeth_irq+0x1a6/0xac0 [<000000000060a0ac>] ccw_device_call_handler+0xa4/0xc0 [<0000000000608b62>] ccw_device_irq+0x5a/0x190 [<00000000005fd1ca>] do_cio_interrupt+0xca/0x108 [<00000000001c0a2e>] handle_irq_event_percpu+0x5e/0x378 [<00000000001c46fc>] handle_percpu_irq+0x6c/0x98 [<00000000001c0066>] generic_handle_irq+0x46/0x68 [<000000000010b5b6>] do_IRQ+0x5e/0x88 [<00000000007cf304>] io_call+0x6/0x20 [<000000000064c63a>] qeth_send_control_data+0x322/0x570 ([<000000000064c50e>] qeth_send_control_data+0x1f6/0x570) [<0000000000651db2>] qeth_send_ipa_cmd+0x92/0x120 [<000000000065b310>] __qeth_l2_set_online+0x170/0xaa8 [<000000000060ebb6>] ccwgroup_set_online+0x56/0x90 [<000000000060ef96>] ccwgroup_online_store+0xd6/0xe0 [<000000000033d11a>] kernfs_fop_write+0x10a/0x188 [<00000000002bbd00>] vfs_write+0x98/0x1c0 [<00000000002bc8a0>] SyS_write+0x60/0xd0 [<00000000007cee3a>] sysc_nr_ok+0x22/0x28 [<000003fffd0c3f28>] 0x3fffd0c3f28 Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-06-10s390/ap_bus: Make modules parameters visible in sysfsMichael Veigel
Change the visibility of the module parameters ap_domain_index and ap_thread_flag for the owner and the members of the owners group in sysfs. Previously the parameters where invisible due to a value of zero as permissions parameter in the module_param_named macro. Signed-off-by: Michael Veigel <veigel@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-06-06net: use ethtool_cmd_speed_set helper to set ethtool speed valueJiri Pirko
Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-04Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm into nextLinus Torvalds
Pull KVM updates from Paolo Bonzini: "At over 200 commits, covering almost all supported architectures, this was a pretty active cycle for KVM. Changes include: - a lot of s390 changes: optimizations, support for migration, GDB support and more - ARM changes are pretty small: support for the PSCI 0.2 hypercall interface on both the guest and the host (the latter acked by Catalin) - initial POWER8 and little-endian host support - support for running u-boot on embedded POWER targets - pretty large changes to MIPS too, completing the userspace interface and improving the handling of virtualized timer hardware - for x86, a larger set of changes is scheduled for 3.17. Still, we have a few emulator bugfixes and support for running nested fully-virtualized Xen guests (para-virtualized Xen guests have always worked). And some optimizations too. The only missing architecture here is ia64. It's not a coincidence that support for KVM on ia64 is scheduled for removal in 3.17" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (203 commits) KVM: add missing cleanup_srcu_struct KVM: PPC: Book3S PR: Rework SLB switching code KVM: PPC: Book3S PR: Use SLB entry 0 KVM: PPC: Book3S HV: Fix machine check delivery to guest KVM: PPC: Book3S HV: Work around POWER8 performance monitor bugs KVM: PPC: Book3S HV: Make sure we don't miss dirty pages KVM: PPC: Book3S HV: Fix dirty map for hugepages KVM: PPC: Book3S HV: Put huge-page HPTEs in rmap chain for base address KVM: PPC: Book3S HV: Fix check for running inside guest in global_invalidates() KVM: PPC: Book3S: Move KVM_REG_PPC_WORT to an unused register number KVM: PPC: Book3S: Add ONE_REG register names that were missed KVM: PPC: Add CAP to indicate hcall fixes KVM: PPC: MPIC: Reset IRQ source private members KVM: PPC: Graciously fail broken LE hypercalls PPC: ePAPR: Fix hypercall on LE guest KVM: PPC: BOOK3S: Remove open coded make_dsisr in alignment handler KVM: PPC: BOOK3S: Always use the saved DAR value PPC: KVM: Make NX bit available with magic page KVM: PPC: Disable NX for old magic page using guests KVM: PPC: BOOK3S: HV: Add mixed page-size support for guest ...
2014-06-03Merge branch 'sched-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next Pull scheduler updates from Ingo Molnar: "The main scheduling related changes in this cycle were: - various sched/numa updates, for better performance - tree wide cleanup of open coded nice levels - nohz fix related to rq->nr_running use - cpuidle changes and continued consolidation to improve the kernel/sched/idle.c high level idle scheduling logic. As part of this effort I pulled cpuidle driver changes from Rafael as well. - standardized idle polling amongst architectures - continued work on preparing better power/energy aware scheduling - sched/rt updates - misc fixlets and cleanups" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (49 commits) sched/numa: Decay ->wakee_flips instead of zeroing sched/numa: Update migrate_improves/degrades_locality() sched/numa: Allow task switch if load imbalance improves sched/rt: Fix 'struct sched_dl_entity' and dl_task_time() comments, to match the current upstream code sched: Consolidate open coded implementations of nice level frobbing into nice_to_rlimit() and rlimit_to_nice() sched: Initialize rq->age_stamp on processor start sched, nohz: Change rq->nr_running to always use wrappers sched: Fix the rq->next_balance logic in rebalance_domains() and idle_balance() sched: Use clamp() and clamp_val() to make sys_nice() more readable sched: Do not zero sg->cpumask and sg->sgp->power in build_sched_groups() sched/numa: Fix initialization of sched_domain_topology for NUMA sched: Call select_idle_sibling() when not affine_sd sched: Simplify return logic in sched_read_attr() sched: Simplify return logic in sched_copy_attr() sched: Fix exec_start/task_hot on migrated tasks arm64: Remove TIF_POLLING_NRFLAG metag: Remove TIF_POLLING_NRFLAG sched/idle: Make cpuidle_idle_call() void sched/idle: Reflow cpuidle_idle_call() sched/idle: Delay clearing the polling bit ...
2014-05-30s390/net: fix format string mismatchesUrsula Braun
cppcheck blamed some issues in drivers/s390/net/... They are fixed here. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com> Reported-by: Toralf Foerster <toralf.foerster@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-30qeth: Fix for possible null pointer dereferenceRickard Strandqvist
There is otherwise a risk of a possible null pointer dereference. Was largely found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-28s390/lowcore: replace lowcore irb array with a per-cpu variableMartin Schwidefsky
Remove the 96-byte irb array from the lowcore and create a per-cpu variable instead. That way we will pick up any change in the definition of the struct irb automatically. Acked-By: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 00:35:21 +0000