| Age | Commit message (Collapse) | Author |
|---|
|
When get_buf_states() gets called with count > 1, it scans the
corresponding number of SBAL states until it encounters a mismatch.
But when these SBALs are in a HW-owned state, the callers don't actually
care _how many_ such SBALs are on the queue. If we can't process the
first SBAL, we can't process any of the following SBALs either. So when
the first SBAL is HW-owned, skip the scan of the remaining SBALs and
thus save some CPU time.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
For a 1-SBAL state inspection, use the corresponding helper.
No functional change, just reducing the number of immediate callers to
get_buf_states().
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Old code restricted the number of inspected SBALs to
QDIO_MAX_BUFFERS_PER_Q - 1, as otherwise the first_to_check and
first_to_kick cursors could overlap. Subsequent code would then assume that
there was no progress on the queue, when in fact _all_ SBALs on the queue
were ready-to-process.
This limitation no longer applies, so allow the queue-scan code to inspect
all SBALs on the queue. Note that qeth requires an additional patch
("s390/qeth: stop/wake TX queues based on their fill level"), to avoid
potential queue stalls when all 128 SBALs are reported as ready-to-process.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Since commit d485235b00 "s390: assume diag308 set always works",
the kernel does not use the rchp instruction anymore. So let's
remove the tracing for it.
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Acked-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Improve /proc/interrupts on s390 to show statistics for individual
MSI interrupts.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Provide the ability to create cachesize aligned interrupt vectors.
These will be used for per-CPU interrupt vectors.
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Add an extra parameter for airq handlers to recognize
floating vs. directed interrupts.
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
The quiesce function calls cio_cancel_halt_clear() and if we
get an -EBUSY we go into a loop where we:
- wait for any interrupts
- flush all I/O in the workqueue
- retry cio_cancel_halt_clear
During the period where we are waiting for interrupts or
flushing all I/O, the channel subsystem could have completed
a halt/clear action and turned off the corresponding activity
control bits in the subchannel status word. This means the next
time we call cio_cancel_halt_clear(), we will again start by
calling cancel subchannel and so we can be stuck between calling
cancel and halt forever.
Rather than calling cio_cancel_halt_clear() immediately after
waiting, let's try to disable the subchannel. If we succeed in
disabling the subchannel then we know nothing else can happen
with the device.
Suggested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Message-Id: <4d5a4b98ab1b41ac6131b5c36de18b76c5d66898.1555449329.git.alifm@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
When releasing the vfio-ccw mdev, we currently do not release
any existing channel program and its pinned pages. This can
lead to the following warning:
[1038876.561565] WARNING: CPU: 2 PID: 144727 at drivers/vfio/vfio_iommu_type1.c:1494 vfio_sanity_check_pfn_list+0x40/0x70 [vfio_iommu_type1]
....
1038876.561921] Call Trace:
[1038876.561935] ([<00000009897fb870>] 0x9897fb870)
[1038876.561949] [<000003ff8013bf62>] vfio_iommu_type1_detach_group+0xda/0x2f0 [vfio_iommu_type1]
[1038876.561965] [<000003ff8007b634>] __vfio_group_unset_container+0x64/0x190 [vfio]
[1038876.561978] [<000003ff8007b87e>] vfio_group_put_external_user+0x26/0x38 [vfio]
[1038876.562024] [<000003ff806fc608>] kvm_vfio_group_put_external_user+0x40/0x60 [kvm]
[1038876.562045] [<000003ff806fcb9e>] kvm_vfio_destroy+0x5e/0xd0 [kvm]
[1038876.562065] [<000003ff806f63fc>] kvm_put_kvm+0x2a4/0x3d0 [kvm]
[1038876.562083] [<000003ff806f655e>] kvm_vm_release+0x36/0x48 [kvm]
[1038876.562098] [<00000000003c2dc4>] __fput+0x144/0x228
[1038876.562113] [<000000000016ee82>] task_work_run+0x8a/0xd8
[1038876.562125] [<000000000014c7a8>] do_exit+0x5d8/0xd90
[1038876.562140] [<000000000014d084>] do_group_exit+0xc4/0xc8
[1038876.562155] [<000000000015c046>] get_signal+0x9ae/0xa68
[1038876.562169] [<0000000000108d66>] do_signal+0x66/0x768
[1038876.562185] [<0000000000b9e37e>] system_call+0x1ea/0x2d8
[1038876.562195] 2 locks held by qemu-system-s39/144727:
[1038876.562205] #0: 00000000537abaf9 (&container->group_lock){++++}, at: __vfio_group_unset_container+0x3c/0x190 [vfio]
[1038876.562230] #1: 00000000670008b5 (&iommu->lock){+.+.}, at: vfio_iommu_type1_detach_group+0x36/0x2f0 [vfio_iommu_type1]
[1038876.562250] Last Breaking-Event-Address:
[1038876.562262] [<000003ff8013aa24>] vfio_sanity_check_pfn_list+0x3c/0x70 [vfio_iommu_type1]
[1038876.562272] irq event stamp: 4236481
[1038876.562287] hardirqs last enabled at (4236489): [<00000000001cee7a>] console_unlock+0x6d2/0x740
[1038876.562299] hardirqs last disabled at (4236496): [<00000000001ce87e>] console_unlock+0xd6/0x740
[1038876.562311] softirqs last enabled at (4234162): [<0000000000b9fa1e>] __do_softirq+0x556/0x598
[1038876.562325] softirqs last disabled at (4234153): [<000000000014e4cc>] irq_exit+0xac/0x108
[1038876.562337] ---[ end trace 6c96d467b1c3ca06 ]---
Similarly we do not free the channel program when we are removing
the vfio-ccw device. Let's fix this by resetting the device and freeing
the channel program and pinned pages in the release path. For the remove
path we can just quiesce the device, since in the remove path the mediated
device is going away for good and so we don't need to do a full reset.
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Message-Id: <ae9f20dc8873f2027f7b3c5d2aaa0bdfe06850b8.1554756534.git.alifm@linux.ibm.com>
Acked-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
Currently we call flush_workqueue while holding the subchannel
spinlock. But flush_workqueue function can go to sleep, so
do not call the function while holding the spinlock.
Fixes the following bug:
[ 285.203430] BUG: scheduling while atomic: bash/14193/0x00000002
[ 285.203434] INFO: lockdep is turned off.
....
[ 285.203485] Preemption disabled at:
[ 285.203488] [<000003ff80243e5c>] vfio_ccw_sch_quiesce+0xbc/0x120 [vfio_ccw]
[ 285.203496] CPU: 7 PID: 14193 Comm: bash Tainted: G W
....
[ 285.203504] Call Trace:
[ 285.203510] ([<0000000000113772>] show_stack+0x82/0xd0)
[ 285.203514] [<0000000000b7a102>] dump_stack+0x92/0xd0
[ 285.203518] [<000000000017b8be>] __schedule_bug+0xde/0xf8
[ 285.203524] [<0000000000b95b5a>] __schedule+0x7a/0xc38
[ 285.203528] [<0000000000b9678a>] schedule+0x72/0xb0
[ 285.203533] [<0000000000b9bfbc>] schedule_timeout+0x34/0x528
[ 285.203538] [<0000000000b97608>] wait_for_common+0x118/0x1b0
[ 285.203544] [<0000000000166d6a>] flush_workqueue+0x182/0x548
[ 285.203550] [<000003ff80243e6e>] vfio_ccw_sch_quiesce+0xce/0x120 [vfio_ccw]
[ 285.203556] [<000003ff80245278>] vfio_ccw_mdev_reset+0x38/0x70 [vfio_ccw]
[ 285.203562] [<000003ff802458b0>] vfio_ccw_mdev_remove+0x40/0x78 [vfio_ccw]
[ 285.203567] [<000003ff801a499c>] mdev_device_remove_ops+0x3c/0x80 [mdev]
[ 285.203573] [<000003ff801a4d5c>] mdev_device_remove+0xc4/0x130 [mdev]
[ 285.203578] [<000003ff801a5074>] remove_store+0x6c/0xa8 [mdev]
[ 285.203582] [<000000000046f494>] kernfs_fop_write+0x14c/0x1f8
[ 285.203588] [<00000000003c1530>] __vfs_write+0x38/0x1a8
[ 285.203593] [<00000000003c187c>] vfs_write+0xb4/0x198
[ 285.203597] [<00000000003c1af2>] ksys_write+0x5a/0xb0
[ 285.203601] [<0000000000b9e270>] system_call+0xdc/0x2d8
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <626bab8bb2958ae132452e1ddaf1b20882ad5a9d.1554756534.git.alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
Add a region to the vfio-ccw device that can be used to submit
asynchronous I/O instructions. ssch continues to be handled by the
existing I/O region; the new region handles hsch and csch.
Interrupt status continues to be reported through the same channels
as for ssch.
Acked-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
The vfio-ccw code will need this, and it matches treatment of ssch
and csch.
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
Allow to extend the regions used by vfio-ccw. The first user will be
handling of halt and clear subchannel.
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
Introduce a mutex to disallow concurrent reads or writes to the
I/O region. This makes sure that the data the kernel or user
space see is always consistent.
The same mutex will be used to protect the async region as well.
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
The flow for processing ssch requests can be improved by splitting
the BUSY state:
- CP_PROCESSING: We reject any user space requests while we are in
the process of translating a channel program and submitting it to
the hardware. Use -EAGAIN to signal user space that it should
retry the request.
- CP_PENDING: We have successfully submitted a request with ssch and
are now expecting an interrupt. As we can't handle more than one
channel program being processed, reject any further requests with
-EBUSY. A final interrupt will move us out of this state.
By making this a separate state, we make it possible to issue a
halt or a clear while we're still waiting for the final interrupt
for the ssch (in a follow-on patch).
It also makes a lot of sense not to preemptively filter out writes to
the io_region if we're in an incorrect state: the state machine will
handle this correctly.
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
When we get a solicited interrupt, the start function may have
been cleared by a csch, but we still have a channel program
structure allocated. Make it safe to call the cp accessors in
any case, so we can call them unconditionally.
While at it, also make sure that functions called from other parts
of the code return gracefully if the channel program structure
has not been initialized (even though that is a bug in the caller).
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
qdio.ko offers a small number of high-level functions to drive the
scanning of a QDIO queue for ready-to-process SBALs:
qdio_get_next_buffers(), __[ti]qdio_inbound_processing() and
__qdio_outbound_processing().
Let each of those functions maintain the 'start' index for their current
scan, and pass it to lower-level helpers as needed. This improves the
code's overall layering, and allows us to eliminate the additional
first_to_kick cursor with a follow-on patch.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Refactor all the low-level helpers to take the first_to_check cursor as
parameter, rather than accessing it directly.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
clang points out that the declaration of cio_irb does not match the
definition exactly, it is missing the alignment attribute:
../drivers/s390/cio/cio.c:50:1: warning: section does not match previous declaration [-Wsection]
DEFINE_PER_CPU_ALIGNED(struct irb, cio_irb);
^
../include/linux/percpu-defs.h:150:2: note: expanded from macro 'DEFINE_PER_CPU_ALIGNED'
DEFINE_PER_CPU_SECTION(type, name, PER_CPU_ALIGNED_SECTION) \
^
../include/linux/percpu-defs.h:93:9: note: expanded from macro 'DEFINE_PER_CPU_SECTION'
extern __PCPU_ATTRS(sec) __typeof__(type) name; \
^
../include/linux/percpu-defs.h:49:26: note: expanded from macro '__PCPU_ATTRS'
__percpu __attribute__((section(PER_CPU_BASE_SECTION sec))) \
^
../drivers/s390/cio/cio.h:118:1: note: previous attribute is here
DECLARE_PER_CPU(struct irb, cio_irb);
^
../include/linux/percpu-defs.h:111:2: note: expanded from macro 'DECLARE_PER_CPU'
DECLARE_PER_CPU_SECTION(type, name, "")
^
../include/linux/percpu-defs.h:87:9: note: expanded from macro 'DECLARE_PER_CPU_SECTION'
extern __PCPU_ATTRS(sec) __typeof__(type) name
^
../include/linux/percpu-defs.h:49:26: note: expanded from macro '__PCPU_ATTRS'
__percpu __attribute__((section(PER_CPU_BASE_SECTION sec))) \
^
Use DECLARE_PER_CPU_ALIGNED() here, to make the two match.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
This cursor is used for debugging only. But since
commit "s390/qdio: pass up count of ready-to-process SBALs" it effectively
duplicates the first_to_check cursor, diverging for just a short moment
when get_*_buffer_frontier() updates q->first_to_check.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
When passing a range of ready-to-process SBALs to the upper-layer
driver, use the available 'count' instead of calculating the distance
between the first_to_check and first_to_kick cursors.
This simplifies the logic of the queue-scan path, and opens up the
possibility of scanning all 128 SBALs in one go (as determining the
reported count no longer requires wrap-around safe arithmetic on the
queue's cursors).
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
When qdio_{in,out}bound_q_moved() scans a queue for pending work, it
currently only returns a boolean to its caller. The interface to the
upper-layer-drivers (qdio_kick_handler() and qdio_get_next_buffers())
then re-calculates the number of pending SBALs from the
q->first_to_check and q->first_to_kick cursors.
Refactor this so that whenever get_{in,out}bound_buffer_frontier()
adjusted the queue's first_to_check cursor, it also returns the
corresponding count of ready-to-process SBALs (and 0 else).
A subsequent patch will then make use of this additional information.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
The DSCI is a 1-byte field, placed at the start of an u32. So when
printing it to a queue's debug state, limit the output to the part
that's actually occupied by the DSCI.
When the DSCI is set this gives us the expected output of '1', rather
than the current (obscure) value of '16777216'.
Suggested-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
This helper is not thinint-specific, qdio_get_next_buffers() also calls it
for non-thinint devices. So give it a more fitting name, and while at it
adjust its parameter.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
pci_out_supported() currently takes a single queue as parameter, even
though Output IRQ support is a per-device feature. Adjust the parameter,
so that the macro can also be used in code paths with no access to a queue
struct. This allows us to remove the remaining open-coded checks for
QIB_AC_OUTBOUND_PCI_SUPPORTED.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
"Improvements and bug fixes for 5.1-rc2:
- Fix early free of the channel program in vfio
- On AP device removal make sure that all messages are flushed with
the driver still attached that queued the message
- Limit brk randomization to 32MB to reduce the chance that the heap
of ld.so is placed after the main stack
- Add a rolling average for the steal time of a CPU, this will be
needed for KVM to decide when to do busy waiting
- Fix a warning in the CPU-MF code
- Add a notification handler for AP configuration change to react
faster to new AP devices"
* tag 's390-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cpumf: Fix warning from check_processor_id
zcrypt: handle AP Info notification from CHSC SEI command
vfio: ccw: only free cp on final interrupt
s390/vtime: steal time exponential moving average
s390/zcrypt: revisit ap device remove procedure
s390: limit brk randomization to 32MB
|
|
Pull KVM updates from Paolo Bonzini:
"ARM:
- some cleanups
- direct physical timer assignment
- cache sanitization for 32-bit guests
s390:
- interrupt cleanup
- introduction of the Guest Information Block
- preparation for processor subfunctions in cpu models
PPC:
- bug fixes and improvements, especially related to machine checks
and protection keys
x86:
- many, many cleanups, including removing a bunch of MMU code for
unnecessary optimizations
- AVIC fixes
Generic:
- memcg accounting"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (147 commits)
kvm: vmx: fix formatting of a comment
KVM: doc: Document the life cycle of a VM and its resources
MAINTAINERS: Add KVM selftests to existing KVM entry
Revert "KVM/MMU: Flush tlb directly in the kvm_zap_gfn_range()"
KVM: PPC: Book3S: Add count cache flush parameters to kvmppc_get_cpu_char()
KVM: PPC: Fix compilation when KVM is not enabled
KVM: Minor cleanups for kvm_main.c
KVM: s390: add debug logging for cpu model subfunctions
KVM: s390: implement subfunction processor calls
arm64: KVM: Fix architecturally invalid reset value for FPEXC32_EL2
KVM: arm/arm64: Remove unused timer variable
KVM: PPC: Book3S: Improve KVM reference counting
KVM: PPC: Book3S HV: Fix build failure without IOMMU support
Revert "KVM: Eliminate extra function calls in kvm_get_dirty_log_protect()"
x86: kvmguest: use TSC clocksource if invariant TSC is exposed
KVM: Never start grow vCPU halt_poll_ns from value below halt_poll_ns_grow_start
KVM: Expose the initial start value in grow_halt_poll_ns() as a module parameter
KVM: grow_halt_poll_ns() should never shrink vCPU halt_poll_ns
KVM: x86/mmu: Consolidate kvm_mmu_zap_all() and kvm_mmu_zap_mmio_sptes()
KVM: x86/mmu: WARN if zapping a MMIO spte results in zapping children
...
|
|
The current AP bus implementation periodically polls the AP configuration
to detect changes. When the AP configuration is dynamically changed via the
SE or an SCLP instruction, the changes will not be reflected to sysfs until
the next time the AP configuration is polled. The CHSC architecture
provides a Store Event Information (SEI) command to make notification of an
AP configuration change. This patch introduces a handler to process
notification from the CHSC SEI command by immediately kicking off an AP bus
scan-after-event.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Sebastian Ott <sebott@linux.ibm.com>
Reviewed-by: Harald Freudenberger <FREUDE@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
When we get an interrupt for a channel program, it is not
necessarily the final interrupt; for example, the issuing
guest may request an intermediate interrupt by specifying
the program-controlled-interrupt flag on a ccw.
We must not switch the state to idle if the interrupt is not
yet final; even more importantly, we must not free the translated
channel program if the interrupt is not yet final, or the host
can crash during cp rewind.
Fixes: e5f84dbaea59 ("vfio: ccw: return I/O results asynchronously")
Cc: stable@vger.kernel.org # v4.12+
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
Since we have a little function to see whether a channel
program address falls within a range of CCWs, let's use
it in the other places of code that make these checks.
(Why isn't ccw_head fully removed? Well, because this
way some longs lines don't have to be reflowed.)
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190222183941.29596-3-farman@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
The routine ccwchain_calc_length() is tasked with looking at a
channel program, seeing how many CCWs are chained together by
the presence of the Chain-Command flag, and returning a count
to the caller.
Previously, it also considered a Transfer-in-Channel CCW as being
an appropriate mechanism for chaining. The problem at the time
was that the TIC CCW will almost certainly not go to the next CCW
in memory (because the CC flag would be sufficient), and so
advancing to the next 8 bytes will cause us to read potentially
invalid memory. So that comparison was removed, and the target
of the TIC is processed as a new chain.
This is fine when a TIC goes to a new chain (consider a NOP+TIC to
a channel program that is being redriven), but there is another
scenario where this falls apart. A TIC can be used to "rewind"
a channel program, for example to find a particular record on a
disk with various orientation CCWs. In this case, we DO want to
consider the memory after the TIC since the TIC will be skipped
once the requested criteria is met. This is due to the Status
Modifier presented by the device, though software doesn't need to
operate on it beyond understanding the behavior change of how the
channel program is executed.
So to handle this, we will re-introduce the check for a TIC CCW
but limit it by examining the target of the TIC. If the TIC
doesn't go back into the current chain, then current behavior
applies; we should stop counting CCWs and let the target of the
TIC be handled as a new chain. But, if the TIC DOES go back into
the current chain, then we need to keep looking at the memory after
the TIC for when the channel breaks out of the TIC loop. We can't
use tic_target_chain_exists() because the chain in question hasn't
been built yet, so we will redefine that comparison with some small
functions to make it more readable and to permit refactoring later.
Fixes: 405d566f98ae ("vfio-ccw: Don't assume there are more ccws after a TIC")
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190222183941.29596-2-farman@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/vfio-ccw into features
Pull vfio-ccw from Cornelia Huck with the following changes:
- A fix in ccw chain processing.
|
|
There is no need to use void pointers, all drivers are in agreement
about the underlying data structure of the SBAL arrays.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
This patch implements the Set Guest Information Block operation
to request association or disassociation of a Guest Information
Block (GIB) with the Adapter Interruption Facility. The operation
is required to receive GIB alert interrupts for guest adapters
in conjunction with AIV and GISA.
Signed-off-by: Michael Mueller <mimu@linux.ibm.com>
Reviewed-by: Sebastian Ott <sebott@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190131085247.13826-9-mimu@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
When trying to calculate the length of a ccw chain, we assume
there are ccws after a TIC. This can lead to overcounting and
copying garbage data from guest memory.
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Message-Id: <d63748c1f1b03147bcbf401596638627a5e35ef7.1548082107.git.alifm@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/vfio-ccw into features
Pull vfio-ccw from Cornelia Huck with the following changes:
- remove unneeded BOXED state
- maintainership changes
|
|
Remove write permissions for fops without a write callback.
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
VFIO_CCW_STATE_BOXED and VFIO_CCW_STATE_BUSY have
identical actions for the same events.
Let's merge both into a single state to simplify the code.
We choose to keep VFIO_CCW_STATE_BUSY.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <1539767923-10539-2-git-send-email-pmorel@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
Direct returns from within a loop are rude, but it doesn't mean it gets
to avoid releasing the memory acquired beforehand.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20181109023937.96105-3-farman@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
If pfn_array_alloc fails somehow, we need to release the pfn_array_table
that was malloc'd earlier.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20181109023937.96105-2-farman@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
Let's register the mediated device when all the data structures
which could be used are initialized.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <1540487720-11634-3-git-send-email-pmorel@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
Fix the following sparse warning:
drivers/s390/cio/vfio_ccw_drv.c:25:19: warning: symbol 'vfio_ccw_io_region'
was not declared. Should it be static?
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Message-Id: <alpine.LFD.2.21.1810151328570.1636@schleppi.aag-de.ibmmobiledemo.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
Move remaining definitions and declarations from include/linux/bootmem.h
into include/linux/memblock.h and remove the redundant header.
The includes were replaced with the semantic patch below and then
semi-automated removal of duplicated '#include <linux/memblock.h>
@@
@@
- #include <linux/bootmem.h>
+ #include <linux/memblock.h>
[sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h]
Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au
[sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h]
Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au
[sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal]
Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au
Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Martin Schwidefsky:
- Improved access control for the zcrypt driver, multiple device nodes
can now be created with different access control lists
- Extend the pkey API to provide random protected keys, this is useful
for encrypted swap device with ephemeral protected keys
- Add support for virtually mapped kernel stacks
- Rework the early boot code, this moves the memory detection into the
boot code that runs prior to decompression.
- Add KASAN support
- Bug fixes and cleanups
* tag 's390-4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (83 commits)
s390/pkey: move pckmo subfunction available checks away from module init
s390/kasan: support preemptible kernel build
s390/pkey: Load pkey kernel module automatically
s390/perf: Return error when debug_register fails
s390/sthyi: Fix machine name validity indication
s390/zcrypt: fix broken zcrypt_send_cprb in-kernel api function
s390/vmalloc: fix VMALLOC_START calculation
s390/mem_detect: add missing include
s390/dumpstack: print psw mask and address again
s390/crypto: Enhance paes cipher to accept variable length key material
s390/pkey: Introduce new API for transforming key blobs
s390/pkey: Introduce new API for random protected key verification
s390/pkey: Add sysfs attributes to emit secure key blobs
s390/pkey: Add sysfs attributes to emit protected key blobs
s390/pkey: Define protected key blob format
s390/pkey: Introduce new API for random protected key generation
s390/zcrypt: add ap_adapter_mask sysfs attribute
s390/zcrypt: provide apfs failure code on type 86 error reply
s390/zcrypt: zcrypt device driver cleanup
s390/kasan: add support for mem= kernel parameter
...
|
|
Provide function to find a ccwgroup device by its busid.
Acked-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
We have two nested loops to check the entries within the pfn_array_table
arrays. But we mistakenly use the outer array as an index in our check,
and completely ignore the indexing performed by the inner loop.
Cc: stable@vger.kernel.org
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20181002010235.42483-1-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
If I attach a vfio-ccw device to my guest, I get the following warning
on the host when the host kernel is CONFIG_HARDENED_USERCOPY=y
[250757.595325] Bad or missing usercopy whitelist? Kernel memory overwrite attempt detected to SLUB object 'dma-kmalloc-512' (offset 64, size 124)!
[250757.595365] WARNING: CPU: 2 PID: 10958 at mm/usercopy.c:81 usercopy_warn+0xac/0xd8
[250757.595369] Modules linked in: kvm vhost_net vhost tap xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack libcrc32c devlink tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables sunrpc dm_multipath s390_trng crc32_vx_s390 ghash_s390 prng aes_s390 des_s390 des_generic sha512_s390 sha1_s390 eadm_sch tape_3590 tape tape_class qeth_l2 qeth ccwgroup vfio_ccw vfio_mdev zcrypt_cex4 mdev vfio_iommu_type1 zcrypt vfio sha256_s390 sha_common zfcp scsi_transport_fc qdio dasd_eckd_mod dasd_mod
[250757.595424] CPU: 2 PID: 10958 Comm: CPU 2/KVM Not tainted 4.18.0-derp #2
[250757.595426] Hardware name: IBM 3906 M05 780 (LPAR)
...snip regs...
[250757.595523] Call Trace:
[250757.595529] ([<0000000000349210>] usercopy_warn+0xa8/0xd8)
[250757.595535] [<000000000032daaa>] __check_heap_object+0xfa/0x160
[250757.595540] [<0000000000349396>] __check_object_size+0x156/0x1d0
[250757.595547] [<000003ff80332d04>] vfio_ccw_mdev_write+0x74/0x148 [vfio_ccw]
[250757.595552] [<000000000034ed12>] __vfs_write+0x3a/0x188
[250757.595556] [<000000000034f040>] vfs_write+0xa8/0x1b8
[250757.595559] [<000000000034f4e6>] ksys_pwrite64+0x86/0xc0
[250757.595568] [<00000000008959a0>] system_call+0xdc/0x2b0
[250757.595570] Last Breaking-Event-Address:
[250757.595573] [<0000000000349210>] usercopy_warn+0xa8/0xd8
While vfio_ccw_mdev_{write|read} validates that the input position/count
does not run over the ccw_io_region struct, the usercopy code that does
copy_{to|from}_user doesn't necessarily know this. It sees the variable
length and gets worried that it's affecting a normal kmalloc'd struct,
and generates the above warning.
Adjust how the ccw_io_region is alloc'd with a whitelist to remove this
warning. The boundary checking will continue to do its thing.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20180921204013.95804-3-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
In the event that we want to change the layout of the ccw_io_region in the
future[1], it might be easier to work with it as a pointer within the
vfio_ccw_private struct rather than an embedded struct.
[1] https://patchwork.kernel.org/comment/22228541/
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20180921204013.95804-2-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
I've stumbled over this too many times now... AOBs are only ever used on
Output Queues. So in qdio_kick_handler(), move the call to their handler
into the Output-only path, and get rid of the convoluted contains_aobs()
helper. No functional change.
While at it, also remove
1. the unused sbal_state->aob field. For processing an async completion,
upper-layer drivers get their AOB pointer from the CQ buffer.
2. an unused EXPORT for qdio_allocate_aob(). External users would have
no way of passing an allocated AOB back into qdio.ko anyways...
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
