summaryrefslogtreecommitdiff
path: root/drivers/s390/char
AgeCommit message (Collapse)Author
2008-04-17[S390] Remove code duplication from monreader / dcssblk.Martin Schwidefsky
Move the function that prints the segment warning messages found in the monreader driver and the dcssblk driver to the extmem base code. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-04-17[S390] replace remaining __FUNCTION__ occurrencesHarvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-04-17[S390] vmur: Use wait queue instead of mutex to serialize openFrank Munzert
If user space opens a unit record device node then vmur is leaving the kernel with lock open_mutex still held to prevent other processes from opening the device simultaneously. This causes lockdep to complain about a lock held when returning to user space. Now the mutex is replaced by a wait queue to serialize device open. Signed-off-by: Frank Munzert <munzert@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-04-17[S390] tape: duplicate sysfs filename when setting tape device onlineMichael Holzheu
When a tape device is set online, offline and online again, the following error message is printed on the console: "sysfs: duplicate filename 'non-rewinding' can not be created". The reason is that when setting a device online, the tape driver creates a sysfs symlink from the tape device to the tape class device. Unfortunately the symlink is not removed correctly, when the device is set offline. Instead of passing the tape device object to sysfs_remove_link, the class device object is used. This patch fixes this problem and uses the correct tape device object now. Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-04-17[S390] sclp: Get rid of in_atomic() use.Heiko Carstens
Reintroduces in_interrupt() check in sclp_tty code. Add may_schedule parameter to vt220 write function, so we can let the write function know if it may schedule or not. So we disallow scheduling for all console calls and may allow them for tty calls. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-03-05[S390] sclp_vt220: speed up console output for interactive workChristian Borntraeger
Currently an output buffer can wait up to HZ/2 until the buffer is flushed. The wait time is noticeable in interactive tools like mc. Change the value to HZ/20, which seems enough for interactive work. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-03-04Build fix for drivers/s390/char/defkeymap.cTony Breeds
Commit 5ce2087ed0eb424e0889bdc9102727f65d2ecdde (Fix default compose table initialization) left a trailing quote. CC drivers/s390/char/defkeymap.o drivers/s390/char/defkeymap.c:155: error: missing terminating ' character drivers/s390/char/defkeymap.c:156: error: syntax error before ';' token make[3]: *** [drivers/s390/char/defkeymap.o] Error 1 Fix that. Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-03Fix default compose table initializationSamuel Thibault
Oddly enough, unsigned int c = '\300'; puts a "negative" value in c, not 0300... This fixes the default unicode compose table by using integers instead of character constants. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-19[S390] sclp: clean up send/receive naming schemePeter Oberparleiter
Make state change events adjust the correct mask by cleaning up naming inconsistencies. Also remove chance for lockup by removing unnecessary mask related check before reading events. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-02-09[S390] sclp_vt220: Fix vt220 initializationChristian Borntraeger
There are two problems in the vt220 intialization: o Currently the vt220 console looses early printk events until the the vt220 tty is registered. o console should work if tty_register fails sclp_vt220_con_init calls __sclp_vt220_init and register_console. It does not register the driver with the sclp core code via sclp_register. That results in an sclp_send_mask=0. Therefore, __sclp_vt220_emit will reject buffers with EIO. Unfortunately register_console will cause the printk buffer to be sent to the console and, therefore, every early message gets dropped. The sclp_send_mask is set later during boot, when sclp_vt220_tty_init calls sclp_register. The solution is to move the sclp_register call from sclp_vt220_tty_init to __sclp_vt220_init. This makes sure that the console is properly registered with the sclp subsystem before the first log buffer messages are passed to the vt220 console. We also adopt the cleanup on error to keep the console alive if tty_register fails. Thanks to Peter Oberparleiter and Heiko Carstens for review and ideas for improvement. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-02-05[S390] sclp_tty/sclp_vt220: Fix scheduling while atomicChristian Borntraeger
Under load the following bug message appeared while using sysrq-t: BUG: scheduling while atomic: bash/3662/0x00000004 0000000000105b74 000000003ba17740 0000000000000002 0000000000000000 000000003ba177e0 000000003ba17758 000000003ba17758 0000000000105bfe 0000000000817ba8 000000003f2a5350 0000000000000000 0000000000000000 000000003ba17740 000000000000000c 000000003ba17740 000000003ba177b0 0000000000568630 0000000000105bfe 000000003ba17740 000000003ba17790 Call Trace: ([<0000000000105b74>] show_trace+0x13c/0x158) [<0000000000105c58>] show_stack+0xc8/0xfc [<0000000000105cbc>] dump_stack+0x30/0x40 [<000000000012a0c8>] __schedule_bug+0x84/0x94 [<000000000056234e>] schedule+0x5ea/0x970 [<0000000000477cd2>] __sclp_vt220_write+0x1f6/0x3ec [<0000000000477f00>] sclp_vt220_con_write+0x38/0x48 [<0000000000130b4a>] __call_console_drivers+0xbe/0xd8 [<0000000000130bf0>] _call_console_drivers+0x8c/0xd0 [<0000000000130eea>] release_console_sem+0x1a6/0x2fc [<0000000000131786>] vprintk+0x262/0x480 [<00000000001319fa>] printk+0x56/0x68 [<0000000000125aaa>] print_cfs_rq+0x45e/0x4a4 [<000000000012614e>] sched_debug_show+0x65e/0xee8 [<000000000012a8fc>] show_state_filter+0x1cc/0x1f0 [<000000000044d39c>] sysrq_handle_showstate+0x2c/0x3c [<000000000044d1fe>] __handle_sysrq+0xae/0x18c [<00000000002001f2>] write_sysrq_trigger+0x8a/0x90 [<00000000001f7862>] proc_reg_write+0x9a/0xc4 [<00000000001a83d4>] vfs_write+0xb8/0x174 [<00000000001a8b88>] sys_write+0x58/0x8c [<0000000000112e7c>] sysc_noemu+0x10/0x16 [<0000020000116f68>] 0x20000116f68 The problem seems to be, that with a full console buffer, release_console_sem disables interrupts with spin_lock_irqsave and then calls the console function without enabling interrupts. __sclp_vt220_write checks for in_interrupt, to decide if it can schedule. It should check for in_atomic instead. The same is true for sclp_tty.c. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-28blk_end_request: changing s390 (take 4)Kiyoshi Ueda
This patch converts s390 to use blk_end_request interfaces. Related 'uptodate' arguments are converted to 'error'. As a result, the interfaces of internal functions below are changed: o dasd_end_request o tapeblock_end_request Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-26[S390] constify function pointer tables.Jan Engelhardt
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] drivers/s390/: Spelling fixesJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] use LIST_HEAD instead of LIST_HEAD_INITDenis Cheng
single list_head variable initialized with LIST_HEAD_INIT could almost always can be replaced with LIST_HEAD declaration, this shrinks the code and looks better. Signed-off-by: Denis Cheng <crquan@gmail.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] drivers/s390: Add missing "space"Joe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] Get rid of additional_cpus kernel parameter.Heiko Carstens
It caused only a lot of confusion. From now on cpu hotplug of up to NR_CPUS will work by default. If somebody wants to limit that then the possible_cpus parameter can be used. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] sclp: convert channel path configure code to use sync interface.Heiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] Standby cpu activation/deactivation.Heiko Carstens
Add a new interface so that cpus can be put into standby state and configured state. Only offline cpus can be put into standby state or configured state. For that the new percpu sysfs attribute "configure" must be used. To put a cpu in standby state a "0" must be written to the attribute. In order to switch it into configured state a "1" must be written to the attribute. Only cpus in configured state can be brought online. In addition this patch introduces a static mapping of physical to logical cpus. As a result only the sysfs directories of present cpus will be created. To scan for new cpus the new sysfs attribute "rescan" must be used. Writing to /sys/devices/system/cpu/rescan will trigger a rescan of cpus and will create directories for new cpus. On IPL only configured cpus will be used. And on reboot/shutdown all cpus will remain in their current state (configured/standby). Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] sclp: sysfs interface for SCLP cpiMichael Ernst
Signed-off-by: Michael Ernst <mernst@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-25cpu-hotplug: replace lock_cpu_hotplug() with get_online_cpus()Gautham R Shenoy
Replace all lock_cpu_hotplug/unlock_cpu_hotplug from the kernel and use get_online_cpus and put_online_cpus instead as it highlights the refcount semantics in these operations. The new API guarantees protection against the cpu-hotplug operation, but it doesn't guarantee serialized access to any of the local data structures. Hence the changes needs to be reviewed. In case of pseries_add_processor/pseries_remove_processor, use cpu_maps_update_begin()/cpu_maps_update_done() as we're modifying the cpu_present_map there. Signed-off-by: Gautham R Shenoy <ego@in.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-22[S390] struct class_device -> struct device conversion.Cornelia Huck
Convert struct class_device users under drivers/s390/char to use struct device. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-10-19Fix misspellings of "system", "controller", "interrupt" and "necessary".Robert P. J. Day
Fix the various misspellings of "system", controller", "interrupt" and "[un]necessary". Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-17unicode diacritics supportSamuel Thibault
There have been issues with non-latin1 diacritics and unicode. http://bugzilla.kernel.org/show_bug.cgi?id=7746 Git 759448f459234bfcf34b82471f0dba77a9aca498 `Kernel utf-8 handling' partly resolved it by adding conversion between diacritics and unicode. The patch below goes further by just turning diacritics into unicode, hence providing better future support. The kbd support can be fetched from http://bugzilla.kernel.org/attachment.cgi?id=12313 This was tested in all of latin1, latin9, latin2 and unicode with french and czech dead keys. Turn the kernel accent_table into unicode, and extend ioctls KDGKBDIACR and KDSKBDIACR into their equivalents KDGKBDIACRUC and KDSKBDIACR. New function int conv_uni_to_8bit(u32 uni) for converting unicode into 8bit _input_. No, we don't want to store the translation, as it is potentially sparse and large. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: Jan Engelhardt <jengelh@gmx.de> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-12[S390] 3215: Handle special console device.Cornelia Huck
The early console device is special as it already has all needed data set and raw3215[0] allocated from con3215_init(). Therefore, it needs special treatment in the probe function so it can be matched with the 3215 driver which is already owning it. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-10-12[S390] vmwatchdog: fix broken inline assembly.Heiko Carstens
Constraint for err is wrong since it is preinitialized and the code relies on it in case of an exception. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-10-12[S390] tape: Fix medium state handlingMichael Holzheu
Currently there are situations, where the tape medium state (loaded, unloaded, unknown) is not set correctly. The reason is that the medium association field is used to determine the medium state. This not always leads to correct results. To fix that we use another field of the medium sense data instead. Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-10-12[S390] zcore: fix inline assembly in memcpy_real()Michael Holzheu
memcpy_real uses the mvcle instruction. This instruction alters all used registers (source, destination and 2 x count). Therefore we have to flag those registers as input/output registers (+d). In addition to that, we have to specify, that we read from memory designated by "src" and write to memory designated by "dest". Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-10-12[S390] Get rid of a bunch of sparse warnings again.Heiko Carstens
Also removes a bunch of ^L in drivers/s390/cio/cmf.c Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-10-10Fixup rq_for_each_segment() indentationJens Axboe
Remove one level of nesting where appropriate. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-10Introduce rq_for_each_segment replacing rq_for_each_bioNeilBrown
Every usage of rq_for_each_bio wraps a usage of bio_for_each_segment, so these can be combined into rq_for_each_segment. We define "struct req_iterator" to hold the 'bio' and 'index' that are needed for the double iteration. Signed-off-by: Neil Brown <neilb@suse.de> Various compile fixes by me... Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-08-22[S390] vmur: fix reference counting for vmur device structureMichael Holzheu
When a vmur device is removed due to a detach of the device, currently the ur device structure is freed. Unfortunately it can happen, that there is still a user of the device structure, when the character device is open during the detach process. To fix this, reference counting for the vmur structure is introduced. In addition to that, the online, offline, probe and remove functions are serialized now using a global mutex. Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-08-22[S390] vmur: fix diag14 exceptions with addresses > 2GB.Michael Holzheu
There are several s390 diagnose calls, which must be executed below the 2GB memory boundary. In order to enforce this, those diagnoses must be compiled into the kernel. Currently diag 14 can be called within the vmur kernel module from addresses above 2GB. This leads to specification exceptions. This patch moves diag10, diag14 and diag210 into the new diag.c file. Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-08-10[S390] monwriter: Serialization bug for multithreaded applications.Melissa Howland
Locking added so that multithreaded applications can now do writes from different threads without the risk of storage corruption. Signed-off-by: Melissa Howland <melissah@us.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-08-10[S390] vmur: diag14 only works with buffers below 2GBMichael Holzheu
If memory buffers above 2GB are used, diagnose 14 raises a specification exception. This fix ensures that buffer allocation is done below the 2GB boundary. Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-08-10[S390] vmur: add "top of queue" sanity check for reader openMichael Holzheu
If the z/VM reader is already open, it can happen that after opening the Linux reader device, not the topmost file is processed. According the semantics of the Linux z/VM unit record device driver, always the topmost file has to be processed. With this fix an error is returned if that is not the case. Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-08-10[S390] vmur: reject open on z/VM reader files with status HOLDMichael Holzheu
If a reader file with HOLD status is at the top of the reader queue, currently all read requests will return data of the second file in the queue. But the semantics of vmur is that always the topmost file is read. With this fix -EPERM is returned on open, if the topmost reader file is in HOLD status. Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-08-10[S390] vmur: use DECLARE_COMPLETION_ONSTACK to keep lockdep happyHeiko Carstens
INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. 000000000ff9fb08 000000000ff9fb18 0000000000000002 0000000000000000 000000000ff9fbb8 000000000ff9fb30 000000000ff9fb30 0000000000104198 0000000000000000 0000000000000002 0000000000000000 0000000000000000 000000000ff9fb18 000000000000000c 000000000ff9fb18 000000000ff9fb88 0000000000448db0 0000000000104198 000000000ff9fb18 000000000ff9fb68 Call Trace: ([<00000000001040ea>] show_trace+0x12e/0x170) [<00000000001041f2>] show_stack+0xc6/0xf8 [<0000000000104252>] dump_stack+0x2e/0x3c [<0000000000155f9c>] __lock_acquire+0x460/0x1048 [<0000000000156c16>] lock_acquire+0x92/0xb8 [<000000000043f406>] _spin_lock_irqsave+0x62/0x80 [<0000000000121382>] complete+0x32/0x78 [<000000001082b468>] ur_int_handler+0xc8/0xec [vmur] [<0000000000313216>] ccw_device_call_handler+0xae/0xd4 [<0000000000310da4>] ccw_device_irq+0x5c/0x130 [<0000000000312c84>] io_subchannel_irq+0x8c/0x118 [<000000000030a88c>] do_IRQ+0x16c/0x194 [<0000000000111a62>] io_no_vtime+0x16/0x1c [<0000000080001394>] 0x80001394 Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-08-10[S390] vmur: allocate single record buffers instead of one big data bufferMichael Holzheu
vmur allocates one contiguous kernel buffer to copy user data when creating ccw programs for punch or printer. If big block sizes are used, under memory pressure it can happen, that we do not get memory in one chunk. Now we allocate memory for each single record to avoid high order allocations. Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-27[S390] Fix sclp_vt220 error handling.Heiko Carstens
Also convert to slab_is_available() as an indicator if get_zeroed_page() will work or not. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-27[S390] vmur: fix diag14_read.Frank Munzert
Record length of spool file must be only stored in 1st SPLINK record Signed-off-by: Frank Munzert <munzert@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-27[S390] Get rid of new section mismatch warnings.Heiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-27[S390] sclp: kill unused SCLP config option.Heiko Carstens
sclp is always compiled in. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-24[BLOCK] Get rid of request_queue_t typedefJens Axboe
Some of the code has been gradually transitioned to using the proper struct request_queue, but there's lots left. So do a full sweet of the kernel and get rid of this typedef and replace its uses with the proper type. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-19some kmalloc/memset ->kzalloc (tree wide)Yoann Padioleau
Transform some calls to kmalloc/memset to a single kzalloc (or kcalloc). Here is a short excerpt of the semantic patch performing this transformation: @@ type T2; expression x; identifier f,fld; expression E; expression E1,E2; expression e1,e2,e3,y; statement S; @@ x = - kmalloc + kzalloc (E1,E2) ... when != \(x->fld=E;\|y=f(...,x,...);\|f(...,x,...);\|x=E;\|while(...) S\|for(e1;e2;e3) S\) - memset((T2)x,0,E1); @@ expression E1,E2,E3; @@ - kzalloc(E1 * E2,E3) + kcalloc(E1,E2,E3) [akpm@linux-foundation.org: get kcalloc args the right way around] Signed-off-by: Yoann Padioleau <padator@wanadoo.fr> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Acked-by: Russell King <rmk@arm.linux.org.uk> Cc: Bryan Wu <bryan.wu@analog.com> Acked-by: Jiri Slaby <jirislaby@gmail.com> Cc: Dave Airlie <airlied@linux.ie> Acked-by: Roland Dreier <rolandd@cisco.com> Cc: Jiri Kosina <jkosina@suse.cz> Acked-by: Dmitry Torokhov <dtor@mail.ru> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Acked-by: Pierre Ossman <drzeus-list@drzeus.cx> Cc: Jeff Garzik <jeff@garzik.org> Cc: "David S. Miller" <davem@davemloft.net> Acked-by: Greg KH <greg@kroah.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17Make the "z/VM unit record device driver" depend on S390Linus Torvalds
I really don't see anybody else wanting to select it ;) Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17[S390] z/VM unit record device driverFrank Munzert
z/VM Unit record character device driver to access VM reader, punch, and printer. Signed-off-by: Frank Munzert <munzert@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-17[S390] vmcp cleanupChristian Borntraeger
A number of small changes to vmcp: - Change preferred email address. - Use PRINT_xxx machros from debug.h like most s390 drivers, define "vmcp:" as PRINTK_HEADER and wrap error message at column 80. - Add error number to error message. - Update copyright, as I touched this file. - Small whitespace diff. - Use mutex instead of semaphore (Thanks Heiko for the patch) - Don't register debug feature on failure. - Check debug feature registration on init to avoid a potential oops on unload if the debug feature could not be registered--> 2 more messages. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-10[S390] vmlogrdr function annotation.Christian Borntraeger
Use __init and __exit for vmlogrdr. Both functions are only referenced by the module_init exit macros, so this change should be fine. Acked-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-10[S390] zcore: Fix __user annotation.Heiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>