summaryrefslogtreecommitdiff
path: root/drivers/rtc
AgeCommit message (Collapse)Author
2018-03-01rtc: sirfsoc: remove useless sirfsoc_rtc_ioctlAlexandre Belloni
sirfsoc_rtc_ioctl() doesn't implement any actual ioctl, remove it. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01rtc: m48t59: use generic nvmemAlexandre Belloni
Instead of adding a binary sysfs attribute from the driver (which suffers from a race condition as the attribute appears after the device), use the core to register an nvmem device. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01rtc: m48t59: switch to rtc_register_deviceAlexandre Belloni
This allows for future improvement of the driver. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01rtc: ds1343: use generic nvmemAlexandre Belloni
Instead of adding a binary sysfs attribute from the driver (which suffers from a race condition as the attribute appears after the device), use the core to register an nvmem device. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01rtc: ds1343: remove undocumented and useless sysfs filesAlexandre Belloni
A documented ABI already exists to get information about the alarm. It is the only one that is used. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01rtc: ds1343: switch to rtc_register_deviceAlexandre Belloni
This allows for future improvement of the driver. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01rtc: ds1343: simplify regmap initializationAlexandre Belloni
Avoid using memset as gcc can properly initialize structures. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01rtc: remove nvmem_configAlexandre Belloni
Because nvmem_config is only used and copied at nvmem registration, remove it from struct rtc_device. All the rtc drivers using nvmem are now calling rtc_nvmem_register directly. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01rtc: rv8803: fix possible race conditionAlexandre Belloni
The probe function is not allowed to fail after registering the RTC. Call rtc_register_device() at the end. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01rtc: rv8803: put struct nvmem_config on the stackAlexandre Belloni
Avoid allocating memory for struct nvmem_config. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01rtc: rv8803: call rtc_nvmem_register()Alexandre Belloni
Call rtc_nvmem_register instead of letting the core do it and stop using the nvmem_config member of struct rtc_device. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01rtc: pcf85363: put struct nvmem_config on the stackAlexandre Belloni
Avoid allocating memory for struct nvmem_config. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01rtc: pcf85363: call rtc_nvmem_register()Alexandre Belloni
Call rtc_nvmem_register instead of letting the core do it and stop using the nvmem_config member of struct rtc_device. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01rtc: omap: call rtc_nvmem_register()Alexandre Belloni
Call rtc_nvmem_register instead of letting the core do it and stop using the nvmem_config member of struct rtc_device. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01rtc: m48t86: put m48t86_nvmem_cfg on the stackAlexandre Belloni
Move m48t86_nvmem_cfg to the stack of m48t86_rtc_probe. This results in a very small code size reduction and make it safer on systems with two similar RTCs: text data bss dec hex filename 1733 164 0 1897 769 drivers/rtc/rtc-m48t86.o.before 1793 100 0 1893 765 drivers/rtc/rtc-m48t86.o.after Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01rtc: m48t86: call rtc_nvmem_register()Alexandre Belloni
Call rtc_nvmem_register instead of letting the core do it and stop using the nvmem_config member of struct rtc_device. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01rtc: ds1511: put ds1511_nvmem_cfg on the stackAlexandre Belloni
Move ds1511_nvmem_cfg to the stack of ds1511_rtc_probe. This results in a very small code size reduction and make it safer on systems with two similar RTCs: text data bss dec hex filename 2128 164 4 2296 8f8 drivers/rtc/rtc-ds1511.o.before 2175 100 4 2279 8e7 drivers/rtc/rtc-ds1511.o.after Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01rtc: ds1511: call rtc_nvmem_register()Alexandre Belloni
Call rtc_nvmem_register instead of letting the core do it and stop using the nvmem_config member of struct rtc_device. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01rtc: ds1307: put struct nvmem_config on the stackAlexandre Belloni
Avoid allocating memory for struct nvmem_config as it is only necessary at the nvmem registration. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01rtc: ds1307: call rtc_nvmem_register()Alexandre Belloni
Call rtc_nvmem_register instead of letting the core do it and stop using the nvmem_config member of struct rtc_device. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01rtc: ds1305: put ds1305_nvmem_cfg on the stackAlexandre Belloni
This makes to code safer on system using two similar RTCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01rtc: ds1305: call rtc_nvmem_register()Alexandre Belloni
Call rtc_nvmem_register instead of letting the core do it and stop using the nvmem_config member of struct rtc_device. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01rtc: export rtc_nvmem_register() to driversAlexandre Belloni
Export rtc_nvmem_register() so it can be called from drivers instead of only the core. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01rtc: nvmem: allow registering the nvmem device before the rtcAlexandre Belloni
Switch the parent of the nvmem device to the parent of the rtc device so it can be registered before the RTC. This is a small change in the ABI as the nvmem moves out of the /sys/class/rtc/rtcX folder to be under the parent device folder (that is where the previous nvram files where registered). However, it is still available under its correct location, /sys/bus/nvmem/devices which is the one that should be used by userspace applications. The other benefit is that the nvmem device can stay registered even if the rtc registration fails. Or it is possible to not register the rtc if the nvmem registration failed. Finally, it makes a lot of sense for devices that actually have different i2c or spi addresses for the RTC and the EEPROM. That is basically how it would end up when using MFD or even completely separate devices. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-02-14rtc: nvmem: disallow registering nvmem more than onceAlexandre Belloni
Make rtc_nvmem_register return -EBUSY when an nvmem is already registered for that RTC. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-02-14rtc: nvmem: return error valuesAlexandre Belloni
In case of error, make rtc_nvmem_register() able to return an error value to its caller. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-02-14rtc: nvmem: pass nvmem_config to rtc_nvmem_register()Alexandre Belloni
To be able to remove nvmem_config from struct rtc_device, pass it as a parameter to rtc_nvmem_register. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-02-13rtc: ds1302: remove redundant initializations of pointer bpColin Ian King
Pointe bp is being initialized and this value is never read, it is being updated to the same value later just before it is going to be used. Remove the initialization as it is never read and keep the setting of bp closer to the use of bp. Cleans up clang warnings: drivers/rtc/rtc-ds1302.c:115:7: warning: Value stored to 'bp' during its initialization is never read drivers/rtc/rtc-ds1302.c:46:7: warning: Value stored to 'bp' during its initialization is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-02-13rtc: goldfish: Add missing MODULE_LICENSEJames Hogan
Fix the following warning in MIPS allmodconfig by adding a MODULE_LICENSE() at the end of rtc-goldfish.c, based on the file header comment which says GNU General Public License version 2: WARNING: modpost: missing MODULE_LICENSE() in drivers/rtc/rtc-goldfish.o Fixes: f22d9cdcb5eb ("rtc: goldfish: Add RTC driver for Android emulator") Signed-off-by: James Hogan <jhogan@kernel.org> Cc: Miodrag Dinic <miodrag.dinic@mips.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: linux-rtc@vger.kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-02-13rtc: Fix overflow when converting time64_t to rtc_timeBaolin Wang
If we convert one large time values to rtc_time, in the original formula 'days * 86400' can be overflowed in 'unsigned int' type to make the formula get one incorrect remain seconds value. Thus we can use div_s64_rem() function to avoid this situation. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-02-13rtc: Add tracepoints for RTC systemBaolin Wang
It will be more helpful to add some tracepoints to track RTC actions when debugging RTC driver. Below sample is that we set/read the RTC time, then set 2 alarms, so we can see the trace logs: set/read RTC time: kworker/0:1-67 [000] 21.814245: rtc_set_time: UTC (1510301580) (0) kworker/0:1-67 [000] 21.814312: rtc_read_time: UTC (1510301580) (0) set the first alarm timer: kworker/0:1-67 [000] 21.829238: rtc_timer_enqueue: RTC timer:(ffffffc15eb49bc8) expires:1510301700000000000 period:0 kworker/0:1-67 [000] 22.018279: rtc_set_alarm: UTC (1510301700) (0) set the second alarm timer: kworker/0:1-67 [000] 22.230284: rtc_timer_enqueue: RTC timer:(ffffff80088e6430) expires:1510301820000000000 period:0 the first alarm timer was expired: kworker/0:1-67 [000] 145.155584: rtc_timer_dequeue: RTC timer:(ffffffc15eb49bc8) expires:1510301700000000000 period:0 kworker/0:1-67 [000] 145.155593: rtc_timer_fired: RTC timer:(ffffffc15eb49bc8) expires:1510301700000000000 period:0 kworker/0:1-67 [000] 145.172504: rtc_set_alarm: UTC (1510301820) (0) the second alarm timer was expired: kworker/0:1-67 [000] 269.102353: rtc_timer_dequeue: RTC timer:(ffffff80088e6430) expires:1510301820000000000 period:0 kworker/0:1-67 [000] 269.102360: rtc_timer_fired: RTC timer:(ffffff80088e6430) expires:1510301820000000000 period:0 disable alarm irq: kworker/0:1-67 [000] 269.102469: rtc_alarm_irq_enable: disable RTC alarm IRQ (0) Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-02-11vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-02Merge tag 'rtc-4.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "Not much this cycle. I've pushed the at32ap700x removal late but it is unlikely to cause any issues. Summary: Subsystem: - Move ABI documentation to Documentation/ABI New driver: - NXP i.MX53 SRTC - Chrome OS EC RTC Drivers: - Remove at32ap700x - Many fixes in various error paths" * tag 'rtc-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: remove rtc-at32ap700x Documentation: rtc: move iotcl interface documentation to ABI Documentation: rtc: add sysfs file permissions Documentation: rtc: move sysfs documentation to ABI rtc: mxc_v2: remove __exit annotation rtc: mxc_v2: Remove unnecessary platform_get_resource() error check rtc: add mxc driver for i.MX53 SRTC dt-bindings: rtc: add bindings for i.MX53 SRTC rtc: r7301: Fix a possible sleep-in-atomic bug in rtc7301_set_time rtc: r7301: Fix a possible sleep-in-atomic bug in rtc7301_read_time rtc: omap: fix unbalanced clk_prepare_enable/clk_disable_unprepare rtc: ac100: Fix multiple race conditions rtc: sun6i: ensure rtc is kfree'd on error rtc: cros-ec: add cros-ec-rtc driver. mfd: cros_ec: Introduce RTC commands and events definitions. rtc: stm32: Fix copyright rtc: Remove unused RTC_DEVICE_NAME_SIZE rtc: r9701: Remove r9701_remove function rtc: brcmstb-waketimer: fix error handling in brcmstb_waketmr_probe()
2018-02-02Merge tag 'powerpc-4.16-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Highlights: - Enable support for memory protection keys aka "pkeys" on Power7/8/9 when using the hash table MMU. - Extend our interrupt soft masking to support masking PMU interrupts as well as "normal" interrupts, and then use that to implement local_t for a ~4x speedup vs the current atomics-based implementation. - A new driver "ocxl" for "Open Coherent Accelerator Processor Interface (OpenCAPI)" devices. - Support for new device tree properties on PowerVM to describe hotpluggable memory and devices. - Add support for CLOCK_{REALTIME/MONOTONIC}_COARSE to the 64-bit VDSO. - Freescale updates from Scott: fixes for CPM GPIO and an FSL PCI erratum workaround, plus a minor cleanup patch. As well as quite a lot of other changes all over the place, and small fixes and cleanups as always. Thanks to: Alan Modra, Alastair D'Silva, Alexey Kardashevskiy, Alistair Popple, Andreas Schwab, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Anshuman Khandual, Anton Blanchard, Arnd Bergmann, Balbir Singh, Benjamin Herrenschmidt, Bhaktipriya Shridhar, Bryant G. Ly, Cédric Le Goater, Christophe Leroy, Christophe Lombard, Cyril Bur, David Gibson, Desnes A. Nunes do Rosario, Dmitry Torokhov, Frederic Barrat, Geert Uytterhoeven, Guilherme G. Piccoli, Gustavo A. R. Silva, Gustavo Romero, Ivan Mikhaylov, Joakim Tjernlund, Joe Perches, Josh Poimboeuf, Juan J. Alvarez, Julia Cartwright, Kamalesh Babulal, Madhavan Srinivasan, Mahesh Salgaonkar, Mathieu Malaterre, Michael Bringmann, Michael Hanselmann, Michael Neuling, Nathan Fontenot, Naveen N. Rao, Nicholas Piggin, Paul Mackerras, Philippe Bergheaud, Ram Pai, Russell Currey, Santosh Sivaraj, Scott Wood, Seth Forshee, Simon Guo, Stewart Smith, Sukadev Bhattiprolu, Thiago Jung Bauermann, Vaibhav Jain, Vasyl Gomonovych" * tag 'powerpc-4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (199 commits) powerpc/mm/radix: Fix build error when RADIX_MMU=n macintosh/ams-input: Use true and false for boolean values macintosh: change some data types from int to bool powerpc/watchdog: Print the NIP in soft_nmi_interrupt() powerpc/watchdog: regs can't be null in soft_nmi_interrupt() powerpc/watchdog: Tweak watchdog printks powerpc/cell: Remove axonram driver rtc-opal: Fix handling of firmware error codes, prevent busy loops powerpc/mpc52xx_gpt: make use of raw_spinlock variants macintosh/adb: Properly mark continued kernel messages powerpc/pseries: Fix cpu hotplug crash with memoryless nodes powerpc/numa: Ensure nodes initialized for hotplug powerpc/numa: Use ibm,max-associativity-domains to discover possible nodes powerpc/kernel: Block interrupts when updating TIDR powerpc/powernv/idoa: Remove unnecessary pcidev from pci_dn powerpc/mm/nohash: do not flush the entire mm when range is a single page powerpc/pseries: Add Initialization of VF Bars powerpc/pseries/pci: Associate PEs to VFs in configure SR-IOV powerpc/eeh: Add EEH notify resume sysfs powerpc/eeh: Add EEH operations to notify resume ...
2018-02-01Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "The core framework has a handful of patches this time around, mostly due to the clk rate protection support added by Jerome Brunet. This feature will allow consumers to lock in a certain rate on the output of a clk so that things like audio playback don't hear pops when the clk frequency changes due to shared parent clks changing rates. Currently the clk API doesn't guarantee the rate of a clk stays at the rate you request after clk_set_rate() is called, so this new API will allow drivers to express that requirement. Beyond this, the core got some debugfs pretty printing patches and a couple minor non-critical fixes. Looking outside of the core framework diff we have some new driver additions and the removal of a legacy TI clk driver. Both of these hit high in the dirstat. Also, the removal of the asm-generic/clkdev.h file causes small one-liners in all the architecture Kbuild files. Overall, the driver diff seems to be the normal stuff that comes all the time to fix little problems here and there and to support new hardware. Summary: Core: - Clk rate protection - Symbolic clk flags in debugfs output - Clk registration enabled clks while doing bookkeeping updates New Drivers: - Spreadtrum SC9860 - HiSilicon hi3660 stub - Qualcomm A53 PLL, SPMI clkdiv, and MSM8916 APCS - Amlogic Meson-AXG - ASPEED BMC Removed Drivers: - TI OMAP 3xxx legacy clk (non-DT) support - asm*/clkdev.h got removed (not really a driver) Updates: - Renesas FDP1-0 module clock on R-Car M3-W - Renesas LVDS module clock on R-Car V3M - Misc fixes to pr_err() prints - Qualcomm MSM8916 audio fixes - Qualcomm IPQ8074 rounded out support for more peripherals - Qualcomm Alpha PLL variants - Divider code was using container_of() on bad pointers - Allwinner DE2 clks on H3 - Amlogic minor data fixes and dropping of CLK_IGNORE_UNUSED - Mediatek clk driver compile test support - AT91 PMC clk suspend/resume restoration support - PLL issues fixed on si5351 - Broadcom IProc PLL calculation updates - DVFS support for Armada mvebu CPU clks - Allwinner fixed post-divider support - TI clkctrl fixes and support for newer SoCs" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (125 commits) clk: aspeed: Handle inverse polarity of USB port 1 clock gate clk: aspeed: Fix return value check in aspeed_cc_init() clk: aspeed: Add reset controller clk: aspeed: Register gated clocks clk: aspeed: Add platform driver and register PLLs clk: aspeed: Register core clocks clk: Add clock driver for ASPEED BMC SoCs clk: mediatek: adjust dependency of reset.c to avoid unexpectedly being built clk: fix reentrancy of clk_enable() on UP systems clk: meson-axg: fix potential NULL dereference in axg_clkc_probe() clk: Simplify debugfs registration clk: Fix debugfs_create_*() usage clk: Show symbolic clock flags in debugfs clk: renesas: r8a7796: Add FDP clock clk: Move __clk_{get,put}() into private clk.h API clk: sunxi: Use CLK_IS_CRITICAL flag for critical clks clk: Improve flags doc for of_clk_detect_critical() arch: Remove clkdev.h asm-generic from Kbuild clk: sunxi-ng: a83t: Add M divider to TCON1 clock clk: Prepare to remove asm-generic/clkdev.h ...
2018-01-27rtc-opal: Fix handling of firmware error codes, prevent busy loopsStewart Smith
According to the OPAL docs: skiboot-5.2.5/doc/opal-api/opal-rtc-read-3.txt skiboot-5.2.5/doc/opal-api/opal-rtc-write-4.txt OPAL_HARDWARE may be returned from OPAL_RTC_READ or OPAL_RTC_WRITE and this indicates either a transient or permanent error. Prior to this patch, Linux was not dealing with OPAL_HARDWARE being a permanent error particularly well, in that you could end up in a busy loop. This was not too hard to trigger on an AMI BMC based OpenPOWER machine doing a continuous "ipmitool mc reset cold" to the BMC, the result of that being that we'd get stuck in an infinite loop in opal_get_rtc_time(). We now retry a few times before returning the error higher up the stack. Fixes: 16b1d26e77b1 ("rtc/tpo: Driver to support rtc and wakeup on PowerNV platform") Cc: stable@vger.kernel.org # v3.19+ Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-19rtc: remove rtc-at32ap700xCorentin Labbe
Since PLATFORM_AT32AP is an AVR32 platform which was removed, the rtc driver rtc-at32ap700x is useless. This patch remove it. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2018-01-12rtc: mxc_v2: remove __exit annotationArnd Bergmann
The mxc_rtc_remove is incorrectly annotated as __exit: `mxc_rtc_remove' referenced in section `.data' of drivers/rtc/rtc-mxc_v2.o: defined in discarded section `.exit.text' of drivers/rtc/rtc-mxc_v2.o This should not be done, as devices can be dynamically bound and unbound to a driver. Fixes: 54c47014b474 ("rtc: add mxc driver for i.MX53 SRTC") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2018-01-12rtc: mxc_v2: Remove unnecessary platform_get_resource() error checkFabio Estevam
devm_ioremap_resource() already checks if the resource is NULL, so remove the unnecessary platform_get_resource() error check. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2018-01-12rtc: add mxc driver for i.MX53 SRTCPatrick Bruenn
Neither rtc-imxdi, rtc-mxc nor rtc-snvs are compatible with i.MX53. This is driver enables support for the low power domain SRTC features: - 32-bit MSB of non-rollover time counter - 32-bit alarm register Select the new config option RTC_DRV_MXC_V2 to build this driver Based on: http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git/tree/drivers/rtc/rtc-mxc_v2.c?h=imx_2.6.35_11.09.01 Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com> Acked-by: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2018-01-12rtc: r7301: Fix a possible sleep-in-atomic bug in rtc7301_set_timeJia-Ju Bai
The driver may sleep under a spinlock. The function call path is: rtc7301_set_time (acquire the spinlock) usleep_range --> may sleep To fix it, usleep_range is replaced with udelay. This bug is found by my static analysis tool(DSAC) and checked by my code review. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2018-01-12rtc: r7301: Fix a possible sleep-in-atomic bug in rtc7301_read_timeJia-Ju Bai
The driver may sleep under a spinlock. The function call path is: rtc7301_read_time (acquire the spinlock) rtc7301_wait_while_busy usleep_range --> may sleep To fix it, usleep_range is replaced with udelay. This bug is found by my static analysis tool(DSAC) and checked by my code review. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-28clk: divider: fix incorrect usage of container_ofJerome Brunet
divider_recalc_rate() is an helper function used by clock divider of different types, so the structure containing the 'hw' pointer is not always a 'struct clk_divider' At the following line: > div = _get_div(table, val, flags, divider->width); in several cases, the value of 'divider->width' is garbage as the actual structure behind this memory is not a 'struct clk_divider' Fortunately, this width value is used by _get_val() only when CLK_DIVIDER_MAX_AT_ZERO flag is set. This has never been the case so far when the structure is not a 'struct clk_divider'. This is probably why we did not notice this bug before Fixes: afe76c8fd030 ("clk: allow a clk divider with max divisor when zero") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-12-18rtc: omap: fix unbalanced clk_prepare_enable/clk_disable_unprepareAndreas Platschek
There are 2 error paths after clk_prepare_enable() was called, where clk_disable_unprepare() is missing. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Andreas Platschek <andreas.platschek@opentech.at> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-18rtc: ac100: Fix multiple race conditionsAlexandre Belloni
The probe function is not allowed to fail after registering the RTC because the following may happen: CPU0: CPU1: sys_load_module() do_init_module() do_one_initcall() cmos_do_probe() rtc_device_register() __register_chrdev() cdev->owner = struct module* open("/dev/rtc0") rtc_device_unregister() module_put() free_module() module_free(mod->module_core) /* struct module *module is now freed */ chrdev_open() spin_lock(cdev_lock) cdev_get() try_module_get() module_is_live() /* dereferences already freed struct module* */ Also, the interrupt handler: ac100_rtc_irq() is dereferencing chip->rtc but this may still be NULL when it is called, resulting in: Unable to handle kernel NULL pointer dereference at virtual address 00000194 pgd = (ptrval) [00000194] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 72 Comm: irq/71-ac100-rt Not tainted 4.15.0-rc1-next-20171201-dirty #120 Hardware name: Allwinner sun8i Family task: (ptrval) task.stack: (ptrval) PC is at mutex_lock+0x14/0x3c LR is at ac100_rtc_irq+0x38/0xc8 pc : [<c06543a4>] lr : [<c04d9a2c>] psr: 60000053 sp : ee9c9f28 ip : 00000000 fp : ee9adfdc r10: 00000000 r9 : c0a04c48 r8 : c015ed18 r7 : ee9bd600 r6 : ee9c9f28 r5 : ee9af590 r4 : c0a04c48 r3 : ef3cb3c0 r2 : 00000000 r1 : ee9af590 r0 : 00000194 Flags: nZCv IRQs on FIQs off Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 4000406a DAC: 00000051 Process irq/71-ac100-rt (pid: 72, stack limit = 0x(ptrval)) Stack: (0xee9c9f28 to 0xee9ca000) 9f20: 00000000 7c2fd1be c015ed18 ee9adf40 ee9c0400 ee9c0400 9f40: ee9adf40 c015ed34 ee9c8000 ee9adf64 ee9c0400 c015f040 ee9adf80 00000000 9f60: c015ee24 7c2fd1be ee9adfc0 ee9adf80 00000000 ee9c8000 ee9adf40 c015eef4 9f80: ef1eba34 c0138f14 ee9c8000 ee9adf80 c0138df4 00000000 00000000 00000000 9fa0: 00000000 00000000 00000000 c01010e8 00000000 00000000 00000000 00000000 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff ffffffff [<c06543a4>] (mutex_lock) from [<c04d9a2c>] (ac100_rtc_irq+0x38/0xc8) [<c04d9a2c>] (ac100_rtc_irq) from [<c015ed34>] (irq_thread_fn+0x1c/0x54) [<c015ed34>] (irq_thread_fn) from [<c015f040>] (irq_thread+0x14c/0x214) [<c015f040>] (irq_thread) from [<c0138f14>] (kthread+0x120/0x150) [<c0138f14>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c) Solve both issues by moving to devm_rtc_allocate_device()/rtc_register_device() Reported-by: Quentin Schulz <quentin.schulz@free-electrons.com> Tested-by: Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-18rtc: sun6i: ensure rtc is kfree'd on errorColin Ian King
The error return path on clk_data allocation failure does not kfree the allocated rtc object. Fix this with a kfree of rtc on the error exit path. Detected by CoverityScan, CID#1452264 ("Resource Leak") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-18rtc: cros-ec: add cros-ec-rtc driver.Stephen Barber
On platforms with a Chrome OS EC, the EC can function as a simple RTC. Add a basic driver with this functionality. Signed-off-by: Stephen Barber <smbarber@chromium.org> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Benson Leung <bleung@chromium.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Tested-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-11-29rtc: stm32: Fix copyrightBenjamin Gaignard
Uniformize STMicroelectronics copyrights header Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> CC: Amelie Delaunay <amelie.delaunay@st.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-11-29rtc: r9701: Remove r9701_remove functionNobuhiro Iwamatsu
r9701_remove function is now empty, remove it. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-11-29rtc: brcmstb-waketimer: fix error handling in brcmstb_waketmr_probe()Alexey Khoroshilov
brcmstb_waketmr_probe() does not disable timer->clk on error paths. Found by Linux Driver Verification project (linuxtesting.org). Fixes: c4f07ecee22e ("rtc: brcmstb-waketimer: Add Broadcom STB wake-timer") Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-30 21:41:32 +0000