summaryrefslogtreecommitdiff
path: root/drivers/rtc
AgeCommit message (Collapse)Author
2012-02-28rtc: sa1100: declare irq in resourceHaojian Zhuang
Avoid to hard coded irq in rtc-sa1100 driver since we could share it among arch-sa1100/arch-pxa/arch-mmp. We still keep hard coded register address since the requirement is enabling both rtc-sa1100 and rtc-pxa driver. The register addresses are conflict since they're only two wrappers on the same rtc device. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2012-02-28rtc: sa1100: remove verification code of alarmHaojian Zhuang
Since next alarm time is already calculated in rtc common interface, we needn't keep this logic in rtc-sa1100.c any more. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
2012-02-28rtc: sa1100: remove periodic codeHaojian Zhuang
Since periodic timer is already supported by hrtimer in rtc interface, we needn't keep the duplicated code in rtc-sa1100.c any more. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
2012-02-23ARM: at91/rtc-at91sam9: pass the GPBR to use via resourcesJean-Christophe PLAGNIOL-VILLARD
The GPBR registers are used for storing RTC values. The GPBR registers to use are now provided using standard resource entry. The array is filled in SoC specific code. rtc-at91sam9 RTT as RTC driver is modified to retrieve this information. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> [nicolas.ferre@atmel.com: rework resources assignment] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Reviewed-by: Ryan Mallon <rmallon@gmail.com>
2012-02-23ARM: at91:rtc/rtc-at91sam9: ioremap register bankJean-Christophe PLAGNIOL-VILLARD
Instead of computing virtual address with AT91_VA_BASE_SYS, use the appropriate ioremap() call on the driver "memory" resource. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-02-23ARM: at91/rtc-at91sam9: each SoC can select the RTT device to useJean-Christophe PLAGNIOL-VILLARD
For the RTT as RTC driver rtc-at91sam9, the platform_device structure is filled during SoC initialization. This will allow to convert this RTC driver as a standard platform driver. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-02-22Merge branch 'lpc32xx/drivers' into next/driversArnd Bergmann
* lpc32xx/drivers: (566 commits) ARM: LPC32xx: ADC support for mach-lpc32xx Includes an update to Linux 3.3-rc4 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-02-15Merge branch 'fortglx/3.4/rtc' of git://git.linaro.org/people/jstultz/linux ↵Thomas Gleixner
into timers/core
2012-02-13ARM: at91:rtc/rtc-at91sam9: ioremap register bankJean-Christophe PLAGNIOL-VILLARD
Instead of computing virtual address with AT91_VA_BASE_SYS, use the appropriate ioremap() call on the driver "memory" resource. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-02-07rtc-s3c: add variants for S3C2443 and S3C2416Heiko Stuebner
Especially the TICNT registers are different from the two rtc types that currently exists. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-02-07rtc-s3c: make room for more variants in devicetree blockHeiko Stuebner
Use the data field of of_device_id to hold the type for s3c_cpu_type. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-01-26rtc: Disable the alarm in the hardware (v2)Rabin Vincent
Currently, the RTC code does not disable the alarm in the hardware. This means that after a sequence such as the one below (the files are in the RTC sysfs), the box will boot up after 2 minutes even though we've asked for the alarm to be turned off. # echo $((`cat since_epoch`)+120) > wakealarm # echo 0 > wakealarm # poweroff Fix this by disabling the alarm when there are no timers to run. The original version of this patch was reverted. This version disables the irq directly instead of setting a disabled timer in the future. Cc: stable@kernel.org Cc: John Stultz <john.stultz@linaro.org> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> [Merged in the second revision from Rabin] Signed-off-by: John Stultz <john.stultz@linaro.org>
2012-01-26rtc: Expire alarms after the time is set. (v2)NeilBrown
If the alarm time programming in the rtc is ever in the past, it won't fire, and any other alarm will be queued after it so they won't fire either. So any time that the alarm might be in the past, we need to trigger the irq handler to ensure the old alarm is cleared and the timer queue is fully in the future. This is done whenever the RTC clock is set. This is the second revision of this patch, which was earlier reverted. This version avoids the initialization problem, which is handled by a different patch. Tested-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: NeilBrown <neilb@suse.de> [Remove problematic initialization change, update commit log, also catch set_mmss case -jstultz] Signed-off-by: John Stultz <john.stultz@linaro.org>
2012-01-26rtc: Avoid setting alarm to a time in the pastJohn Stultz
In some cases at boot up, the RTC alarm may be set in the past, but still have the enabled flag on. This was causing problems, because we would then enqueue the alarm into the timerqueue, but it would never fire. This would clog up the timerqueue and keep other alarms from working. The fix is to check the alarm against the current rtc time at boot and avoid enqueueing the alarm if it is in the past. Reported-by: NeilBrown <neilb@suse.de> Tested-by: NeilBrown <neilb@suse.de> Tested-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: John Stultz <john.stultz@linaro.org>
2012-01-19Revert "RTC: sa1100: remove redundant code of setting alarm"Russell King
This reverts commit 42874759d7494648e42e6e0465fc9c4f3752bba4. This wasn't tested as a stand-alone patch, and it has build errors without the following patches applied: drivers/rtc/rtc-sa1100.c: In function 'sa1100_rtc_set_alarm': drivers/rtc/rtc-sa1100.c:208: error: 'now' undeclared (first use in this function) drivers/rtc/rtc-sa1100.c:208: error: (Each undeclared identifier is reported only once drivers/rtc/rtc-sa1100.c:208: error: for each function it appears in.) drivers/rtc/rtc-sa1100.c:210: error: incompatible type for argument 3 of 'rtc_next_alarm_time' drivers/rtc/rtc-sa1100.c:211: error: 'time' undeclared (first use in this function) So it too gets reverted to bring us back to a working point.
2012-01-19Revert "RTC: sa1100: support sa1100, pxa and mmp soc families"Russell King
This reverts commit 7cea00657dd4daef66ad95e976d5d67ed94cb97e. The sa1100 cleanups fatally broke the SA1100 RTC driver - the first hint that something is wrong are these compiler warnings: drivers/rtc/rtc-sa1100.c:42:1: warning: "RCNR" redefined In file included from arch/arm/mach-sa1100/include/mach/hardware.h:73, from drivers/rtc/rtc-sa1100.c:35: arch/arm/mach-sa1100/include/mach/SA-1100.h:877:1: warning: this is the location of the previous definition drivers/rtc/rtc-sa1100.c:43:1: warning: "RTAR" redefined arch/arm/mach-sa1100/include/mach/SA-1100.h:876:1: warning: this is the location of the previous definition drivers/rtc/rtc-sa1100.c:44:1: warning: "RTSR" redefined arch/arm/mach-sa1100/include/mach/SA-1100.h:879:1: warning: this is the location of the previous definition drivers/rtc/rtc-sa1100.c:45:1: warning: "RTTR" redefined arch/arm/mach-sa1100/include/mach/SA-1100.h:878:1: warning: this is the location of the previous definition drivers/rtc/rtc-sa1100.c:47:1: warning: "RTSR_HZE" redefined arch/arm/mach-sa1100/include/mach/SA-1100.h:891:1: warning: this is the location of the previous definition drivers/rtc/rtc-sa1100.c:48:1: warning: "RTSR_ALE" redefined arch/arm/mach-sa1100/include/mach/SA-1100.h:890:1: warning: this is the location of the previous definition drivers/rtc/rtc-sa1100.c:49:1: warning: "RTSR_HZ" redefined arch/arm/mach-sa1100/include/mach/SA-1100.h:889:1: warning: this is the location of the previous definition drivers/rtc/rtc-sa1100.c:50:1: warning: "RTSR_AL" redefined arch/arm/mach-sa1100/include/mach/SA-1100.h:888:1: warning: this is the location of the previous definition and the second problem, which is far more severe, are the different register layouts, resulting in the wrong registers being read on SA11x0 platforms. This patch adds: #define RCNR 0x00 /* RTC Count Register */ #define RTAR 0x04 /* RTC Alarm Register */ #define RTSR 0x08 /* RTC Status Register */ #define RTTR 0x0c /* RTC Timer Trim Register */ but the SA11x0 registers are: #define RTAR __REG(0x90010000) /* RTC Alarm Reg. */ #define RCNR __REG(0x90010004) /* RTC CouNt Reg. */ #define RTTR __REG(0x90010008) /* RTC Trim Reg. */ #define RTSR __REG(0x90010010) /* RTC Status Reg. */
2012-01-13Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (59 commits) rtc: max8925: Add function to work as wakeup source mfd: Add pm ops to max8925 mfd: Convert aat2870 to dev_pm_ops mfd: Still check other interrupts if we get a wm831x touchscreen IRQ mfd: Introduce missing kfree in 88pm860x probe routine mfd: Add S5M series configuration mfd: Add s5m series irq driver mfd: Add S5M core driver mfd: Improve mc13xxx dt binding document mfd: Fix stmpe section mismatch mfd: Fix stmpe build warning mfd: Fix STMPE I2c build failure mfd: Constify aat2870-core i2c_device_id table gpio: Add support for stmpe variant 801 mfd: Add support for stmpe variant 801 mfd: Add support for stmpe variant 610 mfd: Add support for STMPE SPI interface mfd: Separate out STMPE controller and interface specific code misc: Remove max8997-muic sysfs attributes mfd: Remove unused wm831x_irq_data_to_mask_reg() ... Fix up trivial conflict in drivers/leds/Kconfig due to addition of LEDS_MAX8997 and LEDS_TCA6507 next to each other.
2012-01-11Merge branch 'x86-platform-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/intel config: Fix the APB_TIMER selection x86/mrst: Add additional debug prints for pb_keys x86/intel config: Revamp configuration to allow for Moorestown and Medfield x86/intel/scu/ipc: Match the changes in the x86 configuration x86/apb: Fix configuration constraints x86: Fix INTEL_MID silly x86/Kconfig: Cyclone-timer depends on x86-summit x86: Reduce clock calibration time during slave cpu startup x86/config: Revamp configuration for MID devices x86/sfi: Kill the IRQ as id hack
2012-01-10Merge branch 'unicore32' of git://github.com/gxt/linuxLinus Torvalds
* 'unicore32' of git://github.com/gxt/linux: rtc-puv3: solve section mismatch in rtc-puv3.c rtc-puv3: using module_platform_driver() i2c-puv3: using module_platform_driver() rtc-puv3: irq: remove IRQF_DISABLED unicore32: Remove IRQF_DISABLED unicore32: Use set_current_blocked() unicore32: add ioremap_nocache definition unicore32: delete specified xlate_dev_mem_ptr of: add include asm/setup.h in drivers/of/fdt.c unicore32: standardize /proc/iomem "Kernel code" name
2012-01-10drivers/rtc/interface.c: fix alarm rollover when day or month is out-of-rangeBen Hutchings
Commit f44f7f96a20a ("RTC: Initialize kernel state from RTC") introduced a potential infinite loop. If an alarm time contains a wildcard month and an invalid day (> 31), or a wildcard year and an invalid month (>= 12), the loop searching for the next matching date will never terminate. Treat the invalid values as wildcards. Fixes <http://bugs.debian.org/646429>, <http://bugs.debian.org/653331> Reported-by: leo weppelman <leoweppelman@googlemail.com> Reported-by: "P. van Gaans" <mailme667@yahoo.co.uk> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-10drivers/rtc/rtc-twl.c: add DT support for RTC inside twl4030/twl6030Benoit Cousson
Add the DT support for the TI rtc-twl present in the twl4030 and twl6030 devices. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-10drivers/rtc/: remove redundant spi driver bus initializationLars-Peter Clausen
In ancient times it was necessary to manually initialize the bus field of an spi_driver to spi_bus_type. These days this is done in spi_driver_register(), so we can drop the manual assignment. The patch was generated using the following coccinelle semantic patch: // <smpl> @@ identifier _driver; @@ struct spi_driver _driver = { .driver = { - .bus = &spi_bus_type, }, }; // </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-10drivers/rtc/rtc-jz4740.c: make jz4740_rtc_driver staticAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-10drivers/rtc/rtc-mc13xxx.c: make mc13xxx_rtc_idtable staticAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-10rtc: convert drivers/rtc/* to use module_platform_driver()Axel Lin
This patch converts the drivers in drivers/rtc/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Ben Dooks <ben@simtec.co.uk> Cc: John Stultz <john.stultz@linaro.org> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-10drivers/rtc/rtc-wm831x.c: convert to devm_kzalloc()Mark Brown
Marginally less code and eliminate the possibility of memory leaks. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-10drivers/rtc/rtc-wm831x.c: remove unused period IRQ handlerMark Brown
Due to changes in the RTC core the period interrupt is now unused so delete the code managing it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-10rtc/ab8500: add calibration attribute to AB8500 RTCMark Godfrey
The rtc_calibration attribute allows user-space to get and set the AB8500's RtcCalibration register. The AB8500 will then use the value in this register to compensate for RTC drift every 60 seconds. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Mark Godfrey <mark.godfrey@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-10drivers/rtc/rtc-ab8500.c: change msleep() to usleep_range()Linus Walleij
The resolution of msleep is related to HZ, so with HZ set to 100 any msleep of less than 10ms will become ~10ms. This is not what we want. Use the hrtimer-based usleep_range() and allow for some slack in the non-critical path so we have more control of what is happening here. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Jonas Aaberg <jonas.aberg@stericsson.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-10rtc/ab8500: set can_wake flagAndrew Lynn
Set can_wake flag so wakealarm property is visible in sysfs. Signed-off-by: Andrew Lynn <andrew.lynn@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-10rtc/ab8500: don't disable IRQ:s when suspendingRobert Marklund
We want this driver to be able to wake up the system. Signed-off-by: Robert Marklund <robert.marklund@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-10drivers/rtc/rtc-mxc.c: make alarm workYauhen Kharuzhy
Fix alarm IRQ handling, make the alarm one-shot. Cleanup black magick with a validation of already validated time data. Add ability to wake the system with alarm. [akpm@linux-foundation.org: fix CONFIG_PM=n build] Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com> Cc: Daniel Mack <daniel@caiaq.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-10drivers/rtc/rtc-mxc.c: fix setting time for MX1 SoCYauhen Kharuzhy
There is no way to track year in the i.MX1 RTC: Days Counter register is 9-bit wide only. Attempt to save date after 1970-01-01 plus 512 days causes endless loop in mxc_rtc_set_mmss(). Fix this by resetting year to 1970. [akpm@linux-foundation.org: use conventional comment layout] Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com> Cc: Daniel Mack <daniel@caiaq.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-10drivers/rtc/rtc-cmos.c: fix broken NVRAM bank 2 writingOndrej Zary
Fix writing to NVRAM bank 2 in rtc-cmos driver. It never worked since its introduction in 2.6.28 because of a typo. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-10rtc-puv3: solve section mismatch in rtc-puv3.cGuan Xuetao
The patch renames puv3_rtcdrv to puv3_rtc_driver, so that modpost will know that this is simply a list of pointers to driver functions, in which case the section mismatch is OK. (Thanks Michal Marek) Cc: Axel Lin <axel.lin@gmail.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: rtc-linux@googlegroups.com Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn> -- Section mismatch warning information: WARNING: drivers/rtc/built-in.o(.data+0x90): Section mismatch in reference from the variable puv3_rtcdrv to the function .devinit.text:puv3_rtc_probe() The variable puv3_rtcdrv references the function __devinit puv3_rtc_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console WARNING: drivers/rtc/built-in.o(.data+0x94): Section mismatch in reference from the variable puv3_rtcdrv to the function .devexit.text:puv3_rtc_remove() The variable puv3_rtcdrv references the function __devexit puv3_rtc_remove() If the reference is valid then annotate the variable with __exit* (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console WARNING: drivers/built-in.o(.data+0x6c04): Section mismatch in reference from the variable puv3_rtcdrv to the function .devinit.text:puv3_rtc_probe() The variable puv3_rtcdrv references the function __devinit puv3_rtc_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console WARNING: drivers/built-in.o(.data+0x6c08): Section mismatch in reference from the variable puv3_rtcdrv to the function .devexit.text:puv3_rtc_remove() The variable puv3_rtcdrv references the function __devexit puv3_rtc_remove() If the reference is valid then annotate the variable with __exit* (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console WARNING: vmlinux.o(.data+0x1126c): Section mismatch in reference from the variable puv3_rtcdrv to the function .devinit.text:puv3_rtc_probe() The variable puv3_rtcdrv references the function __devinit puv3_rtc_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console WARNING: vmlinux.o(.data+0x11270): Section mismatch in reference from the variable puv3_rtcdrv to the function .devexit.text:puv3_rtc_remove() The variable puv3_rtcdrv references the function __devexit puv3_rtc_remove() If the reference is valid then annotate the variable with __exit* (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console
2012-01-10rtc-puv3: using module_platform_driver()Guan Xuetao
This patch converts the driver to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
2012-01-10rtc-puv3: irq: remove IRQF_DISABLEDGuan Xuetao
This flag is deprecated, so is removed now. Signed-off-by: Yong Zhang <yong.zhang@gmail.com> Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
2012-01-09Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Driver specific changes Again, a lot of platforms have changes in here: pxa, samsung, omap, at91, imx, ... * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits) ARM: sa1100: clean up of the clock support ARM: pxa: add dummy clock for sa1100-rtc RTC: sa1100: support sa1100, pxa and mmp soc families RTC: sa1100: remove redundant code of setting alarm RTC: sa1100: Clean out ost register Input: zylonite-wm97xx - replace IRQ_GPIO() with gpio_to_irq() pcmcia: pxa: replace IRQ_GPIO() with gpio_to_irq() ARM: EXYNOS: Modified files for SPI consolidation work ARM: S5P64X0: Enable SDHCI support ARM: S5P64X0: Add lookup of sdhci-s3c clocks using generic names ARM: S5P64X0: Add HSMMC setup for host Controller ARM: EXYNOS: Add USB OHCI support to ORIGEN board USB: Add Samsung Exynos OHCI diver ARM: EXYNOS: Add USB OHCI support to SMDKV310 board ARM: EXYNOS: Add USB OHCI device net: macb: fix build break with !CONFIG_OF i2c: tegra: Support DVC controller in device tree i2c: tegra: Add __devinit/exit to probe/remove net/at91_ether: use gpio_is_valid for phy IRQ line ARM: at91/net: add macb ethernet controller in 9g45/9g20 DT ...
2012-01-09Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Device tree conversions for samsung and tegra Both platforms had some initial device tree support, but this adds much more to actually make it usable. * tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (45 commits) ARM: dts: Add intial dts file for EXYNOS4210 SoC, SMDKV310 and ORIGEN ARM: EXYNOS: Add Exynos4 device tree enabled board file rtc: rtc-s3c: Add device tree support input: samsung-keypad: Add device tree support ARM: S5PV210: Modify platform data for pl330 driver ARM: S5PC100: Modify platform data for pl330 driver ARM: S5P64x0: Modify platform data for pl330 driver ARM: EXYNOS: Add a alias for pdma clocks ARM: EXYNOS: Limit usage of pl330 device instance to non-dt build ARM: SAMSUNG: Add device tree support for pl330 dma engine wrappers DMA: PL330: Add device tree support ARM: EXYNOS: Modify platform data for pl330 driver DMA: PL330: Infer transfer direction from transfer request instead of platform data DMA: PL330: move filter function into driver serial: samsung: Fix build for non-Exynos4210 devices serial: samsung: add device tree support serial: samsung: merge probe() function from all SoC specific extensions serial: samsung: merge all SoC specific port reset functions ARM: SAMSUNG: register uart clocks to clock lookup list serial: samsung: remove all uses of get_clksrc and set_clksrc ... Fix up fairly trivial conflicts in arch/arm/mach-s3c2440/clock.c and drivers/tty/serial/Kconfig both due to just adding code close to changes.
2012-01-09Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Cleanups on various subarchitectures Cleanup patches for various ARM platforms and some of their associated drivers, the bulk of these is for mach-91. Arnd ended up pulling in the restart branch from Russell in order to fix up some simple but annoying merge conflicts. * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (44 commits) arm/at91: fix build of stamp9g20 ARM: u300: delete memory.h MAINTAINERS: add maintainer entry for Picochip picoxcell ARM: picoxcell: move io mappings to common.c ARM: picoxcell: don't reserve irq_descs ARM: picoxcell: remove mach/memory.h ARM: at91: delete the pcontrol_g20_defconfig arm/tegra: Remove code that's ifndef CONFIG_ARM_GIC arm/tegra: remove unused defines arm/tegra: fix variable formatting in makefile ARM: davinci: vpif: move code to driver core header from platform ARM: at91/gpio: fix display of number of irq setuped ARM: at91/gpio: drop PIN_BASE ARM: at91/udc: use gpio_is_valid to check the gpio ARM: at91/ohci: use gpio_is_valid to check the gpio ARM: at91/nand: use gpio_is_valid to check the gpio ARM: at91/mmc: use gpio_is_valid to check the gpio ARM: at91/ide: use gpio_is_valid to check the gpio ARM: at91/pata: use gpio_is_valid to check the gpio ARM: at91/soc: use gpio_is_valid to check the gpio ...
2012-01-09Merge branch 'samsung/driver' into next/driversArnd Bergmann
Conflicts: arch/arm/mach-mxs/include/mach/common.h Pull in previous samsung conflict merges and do a trivial merge of an mxs double-add conflict. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-01-09rtc: max8925: Add function to work as wakeup sourceKevin Liu
Signed-off-by: Kevin Liu <kliu5@marvell.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Unify abx500 headers in mfd/abx500Linus Walleij
This moves all the header files related to the abx500 family into a common include directory below mfd. From now on we place any subchip header in that directory. Headers previously in e.g. <linux/mfd/ab8500/gpio.h> get prefixed and are now e.g. <linux/mfd/abx500/ab8500-gpio.h>. The top-level abstract interface remains in <linux/mfd/abx500.h>. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-07Merge branch 'next/cleanup' into samsung/dtArnd Bergmann
Conflicts: arch/arm/mach-exynos/common.c The common.c file gets changes from rmk/stable-devel (part of next/cleanup), rmk/restart, samsung/dt and follow-on branches from the samsung tree. Pulling it all together here hopefully avoids having to do even more conflicting merge changesets in this one file. What a mess! Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-01-07Merge branch 'depends/rmk/for-linus' into samsung/dtArnd Bergmann
Conflicts: arch/arm/mach-exynos/Makefile arch/arm/mach-exynos/cpu.c -> common.c arch/arm/mach-exynos/include/mach/entry-macro.S arch/arm/mach-exynos/init.c -> common.c arch/arm/mach-s5p64x0/init.c -> common.c arch/arm/mach-s5pv210/init.c -> common.c Multiple files were moved into common.c files in the rmk/for-linus branch, so this moves over the samsung/dt changes to the new files. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-01-07Merge branch 'depends/rmk/restart' into next/cleanupArnd Bergmann
Conflicts: arch/arm/mach-at91/at91cap9.c arch/arm/mach-at91/at91sam9260.c arch/arm/mach-at91/at91sam9261.c arch/arm/mach-at91/at91sam9263.c arch/arm/mach-at91/at91sam9g45.c arch/arm/mach-at91/at91sam9rl.c arch/arm/mach-exynos/cpu.c arch/arm/mach-shmobile/board-kota2.c This resolves a bunch of conflicts between the arm-soc tree and changes from the arm tree that have gone upstream. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-01-06Merge branch 'amba-modalias' of ↵Linus Torvalds
git://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'amba-modalias' of git://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: sound: aaci: Enable module alias autogeneration for AMBA drivers watchdog: sp805: Enable module alias autogeneration for AMBA drivers fbdev: amba: Enable module alias autogeneration for AMBA drivers serial: pl011: Enable module alias autogeneration for AMBA drivers serial: pl010: Enable module alias autogeneration for AMBA drivers spi: pl022: Enable module alias autogeneration for AMBA drivers rtc: pl031: Enable module alias autogeneration for AMBA drivers rtc: pl030: Enable module alias autogeneration for AMBA drivers mmc: mmci: Enable module alias autogeneration for AMBA drivers input: ambakmi: Enable module alias autogeneration for AMBA drivers gpio: pl061: Enable module alias autogeneration for AMBA drivers dmaengine: pl330: Enable module alias autogeneration for AMBA drivers dmaengine: pl08x: Enable module alias autogeneration for AMBA drivers hwrng: nomadik: Enable module alias autogeneration for AMBA drivers ARM: amba: Auto-generate AMBA driver module aliases during modpost ARM: amba: Move definition of struct amba_id to mod_devicetable.h
2012-01-04Revert "rtc: Expire alarms after the time is set."Linus Torvalds
This reverts commit 93b2ec0128c431148b216b8f7337c1a52131ef03. The call to "schedule_work()" in rtc_initialize_alarm() happens too early, and can cause oopses at bootup Neil Brown explains why we do it: "If you set an alarm in the future, then shutdown and boot again after that time, then you will end up with a timer_queue node which is in the past. When this happens the queue gets stuck. That entry-in-the-past won't get removed until and interrupt happens and an interrupt won't happen because the RTC only triggers an interrupt when the alarm is "now". So you'll find that e.g. "hwclock" will always tell you that 'select' timed out. So we force the interrupt work to happen at the start just in case." and has a patch that convert it to do things in-process rather than with the worker thread, but right now it's too late to play around with this, so we just revert the patch that caused problems for now. Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Requested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Requested-by: John Stultz <john.stultz@linaro.org> Cc: Neil Brown <neilb@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-03Revert "rtc: Disable the alarm in the hardware"Linus Torvalds
This reverts commit c0afabd3d553c521e003779c127143ffde55a16f. It causes failures on Toshiba laptops - instead of disabling the alarm, it actually seems to enable it on the affected laptops, resulting in (for example) the laptop powering on automatically five minutes after shutdown. There's a patch for it that appears to work for at least some people, but it's too late to play around with this, so revert for now and try again in the next merge window. See for example http://bugs.debian.org/652869 Reported-and-bisected-by: Andreas Friedrich <afrie@gmx.net> (Toshiba Tecra) Reported-by: Antonio-M. Corbi Bellot <antonio.corbi@ua.es> (Toshiba Portege R500) Reported-by: Marco Santos <marco.santos@waynext.com> (Toshiba Portege Z830) Reported-by: Christophe Vu-Brugier <cvubrugier@yahoo.fr> (Toshiba Portege R830) Cc: Jonathan Nieder <jrnieder@gmail.com> Requested-by: John Stultz <john.stultz@linaro.org> Cc: stable@kernel.org # for the versions that applied this Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-12-28Merge branch 'drivers/rtc-sa1100' into next/driversArnd Bergmann
* drivers/rtc-sa1100: ARM: sa1100: clean up of the clock support ARM: pxa: add dummy clock for sa1100-rtc RTC: sa1100: support sa1100, pxa and mmp soc families RTC: sa1100: remove redundant code of setting alarm RTC: sa1100: Clean out ost register Conflicts: arch/arm/mach-pxa/pxa25x.c arch/arm/mach-pxa/pxa27x.c
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 09:23:09 +0000