summaryrefslogtreecommitdiff
path: root/drivers/rtc
AgeCommit message (Collapse)Author
2019-09-22Merge tag 'rtc-5.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "Two new drivers and the new pcf2127 feature make the bulk of the additions. The rest are the usual fixes and new features. Subsystem: - add debug message when registration fails New drivers: - Amlogic Virtual Wake - Freescale FlexTimer Module alarm Drivers: - remove superfluous error messages - convert to i2c_new_dummy_device and devm_i2c_new_dummy_device - Remove dev_err() usage after platform_get_irq() - Set RTC range for: pcf2123, pcf8563, snvs. - pcf2127: tamper detection and watchdog support - pcf85363: fix regmap issue - sun6i: H6 support - remove w90x900/nuc900 driver" * tag 'rtc-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (51 commits) rtc: meson: mark PM functions as __maybe_unused rtc: sc27xx: Remove clearing SPRD_RTC_POWEROFF_ALM_FLAG flag dt-bindings: rtc: ds1307: add rx8130 compatible rtc: sun6i: Allow using as wakeup source from suspend rtc: pcf8563: let the core handle range offsetting rtc: pcf8563: remove useless indirection rtc: pcf8563: convert to devm_rtc_allocate_device rtc: pcf8563: add Microcrystal RV8564 compatible rtc: pcf8563: add Epson RTC8564 compatible rtc: s35390a: convert to devm_i2c_new_dummy_device() rtc: max77686: convert to devm_i2c_new_dummy_device() rtc: pcf85363/pcf85263: fix regmap error in set_time rtc: snvs: switch to rtc_time64_to_tm/rtc_tm_to_time64 rtc: snvs: set range rtc: snvs: fix possible race condition rtc: pcf2127: bugfix: watchdog build dependency rtc: pcf2127: add tamper detection support rtc: pcf2127: add watchdog feature support rtc: pcf2127: bugfix: read rtc disables watchdog rtc: pcf2127: cleanup register and bit defines ...
2019-09-20Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "We have a small collection of core framework updates this time, mostly around clk registration by clk providers and debugfs "nice to haves" for rate constraints. I'll highlight that we're now setting the clk_init_data pointer inside struct clk_hw to NULL during clk_register(), which may break some drivers that thought they could use that pointer during normal operations. That change has been sitting in next for a while now but maybe something is still broken. We'l see. Other than that the core framework changes aren't invasive and they're fixing bugs, simplifying, and making things better. On the clk driver side we got the usual addition of new SoC support, new features for existing drivers, and bug fixes scattered throughout. The biggest diffstat is the Amlogic driver that gained CPU clk support in addition to migrating to the new way of specifying clk parents. After that the Qualcomm, i.MX, Mediatek, and Rockchip clk drivers got support for various new SoCs and clock controllers from those vendors. Core: - Drop NULL checks in clk debugfs - Add min/max rates to clk debugfs - Set clk_init_data pointer inside clk_hw to NULL after registration - Make clk_bulk_get_all() return an 'id' corresponding to clock-names - Evict parents from parent cache when they're unregistered New Drivers: - Add clock driver for i.MX8MN SoCs - Support aspeed AST2600 SoCs - Support for Mediatek MT6779 SoCs - Support qcom SM8150 GCC and RPMh clks - Support qcom QCS404 WCSS clks - Add CPU clock support for Armada 7K/8K (specifically AP806 and AP807) - Addition of clock driver for Rockchip rk3308 SoCs Updates: - Add regulator support to the cdce925 clk driver - Add support for Raspberry Pi 4 bcm2711 SoCs - Add SDIO gate support to aspeed driver - Add missing of_node_put() calls in various clk drivers - Migrate Amlogic driver to new clock parent description method - Add DVFS support to Amlogic Meson g12 - Add Amlogic Meson g12a reset support to the axg audio clock controller - Add sm1 support to the Amlogic Meson g12a clock controller - Switch i.MX8MM clock driver to platform driver - Add Hifi4 DSP related clocks for i.MX8QXP SoC - Fix Audio PLL setting and parent clock for USB - Misc i.MX8 clock driver improvements and corrections - Set floor ops for Qualcomm SD clks so that rounding works - Fix "always-on" Clock Domains on Renesas R-Car M1A, RZ/A1, RZ/A2, and RZ/N1 - Enable the Allwinner V3 SoC and fix the i2s clock for H6" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (137 commits) clk: Drop !clk checks in debugfs dumping clk: imx: imx8mn: fix pll mux bit clk: imx: imx8mm: fix pll mux bit clk: imx: clk-pll14xx: unbypass PLL by default clk: imx: pll14xx: avoid glitch when set rate clk: mvebu: ap80x: add AP807 clock support clk: mvebu: ap806: Prepare the introduction of AP807 clock support clk: mvebu: ap806: add AP-DCLK (hclk) to system controller driver clk: mvebu: ap806: be more explicit on what SaR is clk: mvebu: ap80x-cpu: add AP807 CPU clock support clk: mvebu: ap806-cpu: prepare mapping of AP807 CPU clock dt-bindings: ap806: Document AP807 clock compatible dt-bindings: ap80x: Document AP807 CPU clock compatible clk: sprd: add missing kfree clk: at91: allow 24 Mhz clock as input for PLL clk: Make clk_bulk_get_all() return a valid "id" clk: actions: Fix factor clk struct member access clk: qcom: rcg: Return failure for RCG update clk: remove extra ---help--- tags in Kconfig clk: add include guard to clk-conf.h ...
2019-09-19Merge tag 'tag-chrome-platform-for-v5.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform updates from Benson Leung: "CrOS EC / MFD Migration: - Move cros_ec core driver from mfd into chrome platform. Wilco EC: - Add batt_ppid_info command to Wilco telemetry driver. CrOS EC: - cros_ec_rpmsg : Add support to inform EC of suspend/resume status - cros_ec_rpmsg : Fix race condition on probe failed - cros_ec_chardev : Add a poll handler to receive MKBP events Misc: - bugfixes in cros_usbpd_logger and cros_ec_ishtp" * tag 'tag-chrome-platform-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: platform/chrome: cros_usbpd_logger: null check create_singlethread_workqueue platform/chrome: cros_ec_chardev: Add a poll handler to receive MKBP events platform/chrome: cros_ec_rpmsg: Fix race with host command when probe failed platform/chrome: chromeos_tbmc: Report wake events mfd: cros_ec: Use mfd_add_hotplug_devices() helper mfd: cros_ec: Add convenience struct to define autodetectable CrOS EC subdevices mfd: cros_ec: Add convenience struct to define dedicated CrOS EC MCUs mfd: cros_ec: Use kzalloc and cros_ec_cmd_xfer_status helper mfd / platform: cros_ec: Reorganize platform and mfd includes mfd / platform: cros_ec: Rename config to a better name mfd: cros_ec: Switch to use the new cros-ec-chardev driver mfd / platform: cros_ec: Miscellaneous character device to talk with the EC mfd / platform: cros_ec: Move cros-ec core driver out from MFD mfd / platform: cros_ec: Handle chained ECs as platform devices platform/chrome: cros_ec_rpmsg: Add host command AP sleep state support platform/chrome: chromeos_laptop: drop checks of NULL-safe functions platform/chrome: wilco_ec: Add batt_ppid_info command to telemetry driver
2019-09-17Merge tag 'leds-for-5.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED updates from Jacek Anaszewski: "In this cycle we've finally managed to contribute the patch set sorting out LED naming issues. Besides that there are many changes scattered among various LED class drivers and triggers. LED naming related improvements: - add new 'function' and 'color' fwnode properties and deprecate 'label' property which has been frequently abused for conveying vendor specific names that have been available in sysfs anyway - introduce a set of standard LED_FUNCTION* definitions - introduce a set of standard LED_COLOR_ID* definitions - add a new {devm_}led_classdev_register_ext() API with the capability of automatic LED name composition basing on the properties available in the passed fwnode; the function is backwards compatible in a sense that it uses 'label' data, if present in the fwnode, for creating LED name - add tools/leds/get_led_device_info.sh script for retrieving LED vendor, product and bus names, if applicable; it also performs basic validation of an LED name - update following drivers and their DT bindings to use the new LED registration API: - leds-an30259a, leds-gpio, leds-as3645a, leds-aat1290, leds-cr0014114, leds-lm3601x, leds-lm3692x, leds-lp8860, leds-lt3593, leds-sc27xx-blt Other LED class improvements: - replace {devm_}led_classdev_register() macros with inlines - allow to call led_classdev_unregister() unconditionally - switch to use fwnode instead of be stuck with OF one LED triggers improvements: - led-triggers: - fix dereferencing of null pointer - fix a memory leak bug - ledtrig-gpio: - GPIO 0 is valid Drop superseeded apu2/3 support from leds-apu since for apu2+ a newer, more complete driver exists, based on a generic driver for the AMD SOCs gpio-controller, supporting LEDs as well other devices: - drop profile field from priv data - drop iosize field from priv data - drop enum_apu_led_platform_types - drop superseeded apu2/3 led support - add pr_fmt prefix for better log output - fix error message on probing failure Other misc fixes and improvements to existing LED class drivers: - leds-ns2, leds-max77650: - add of_node_put() before return - leds-pwm, leds-is31fl32xx: - use struct_size() helper - leds-lm3697, leds-lm36274, leds-lm3532: - switch to use fwnode_property_count_uXX() - leds-lm3532: - fix brightness control for i2c mode - change the define for the fs current register - fixes for the driver for stability - add full scale current configuration - dt: Add property for full scale current. - avoid potentially unpaired regulator calls - move static keyword to the front of declarations - fix optional led-max-microamp prop error handling - leds-max77650: - add of_node_put() before return - add MODULE_ALIAS() - Switch to fwnode property API - leds-as3645a: - fix misuse of strlcpy - leds-netxbig: - add of_node_put() in netxbig_leds_get_of_pdata() - remove legacy board-file support - leds-is31fl319x: - simplify getting the adapter of a client - leds-ti-lmu-common: - fix coccinelle issue - move static keyword to the front of declaration - leds-syscon: - use resource managed variant of device register - leds-ktd2692: - fix a typo in the name of a constant - leds-lp5562: - allow firmware files up to the maximum length - leds-an30259a: - fix typo - leds-pca953x: - include the right header" * tag 'leds-for-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: (72 commits) leds: lm3532: Fix optional led-max-microamp prop error handling led: triggers: Fix dereferencing of null pointer leds: ti-lmu-common: Move static keyword to the front of declaration leds: lm3532: Move static keyword to the front of declarations leds: trigger: gpio: GPIO 0 is valid leds: pwm: Use struct_size() helper leds: is31fl32xx: Use struct_size() helper leds: ti-lmu-common: Fix coccinelle issue in TI LMU leds: lm3532: Avoid potentially unpaired regulator calls leds: syscon: Use resource managed variant of device register leds: Replace {devm_}led_classdev_register() macros with inlines leds: Allow to call led_classdev_unregister() unconditionally leds: lm3532: Add full scale current configuration dt: lm3532: Add property for full scale current. leds: lm3532: Fixes for the driver for stability leds: lm3532: Change the define for the fs current register leds: lm3532: Fix brightness control for i2c mode leds: Switch to use fwnode instead of be stuck with OF one leds: max77650: Switch to fwnode property API led: triggers: Fix a memory leak bug ...
2019-09-10rtc: meson: mark PM functions as __maybe_unusedArnd Bergmann
The meson_vrtc_set_wakeup_time() function is only used by the PM functions and causes a warning when they are disabled: drivers/rtc/rtc-meson-vrtc.c:32:13: error: unused function 'meson_vrtc_set_wakeup_time' [-Werror,-Wunused-function] Remove the #ifdef around the callers and add a __maybe_unused annotation as a more reliable way to avoid these warnings. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20190906152438.1533833-1-arnd@arndb.de Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-09-10rtc: sc27xx: Remove clearing SPRD_RTC_POWEROFF_ALM_FLAG flagBaolin Wang
The SPRD_RTC_POWEROFF_ALM_FLAG flag is used to indicate if a poweroff alarm is set, which can power on the system when system in power-off status. And the bootloader will validate this flag to check if the booting mode is alarm booting mode, thus we should not clear this flag in kernel, instead bootloader will clear this flag after checking the booting mode. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Link: https://lore.kernel.org/r/1f75310242de75b14d8973538bf96efffb395daf.1567666894.git.baolin.wang@linaro.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-09-02mfd / platform: cros_ec: Reorganize platform and mfd includesEnric Balletbo i Serra
There is a bit of mess between cros-ec mfd includes and platform includes. For example, we have a linux/mfd/cros_ec.h include that exports the interface implemented in platform/chrome/cros_ec_proto.c. Or we have a linux/mfd/cros_ec_commands.h file that is non related to the multifunction device (in the sense that is not exporting any function of the mfd device). This causes crossed includes between mfd and platform/chrome subsystems and makes the code difficult to read, apart from creating 'curious' situations where a platform/chrome driver includes a linux/mfd/cros_ec.h file just to get the exported functions that are implemented in another platform/chrome driver. In order to have a better separation on what the cros-ec multifunction driver does and what the cros-ec core provides move and rework the affected includes doing: - Move cros_ec_commands.h to include/linux/platform_data/cros_ec_commands.h - Get rid of the parts that are implemented in the platform/chrome/cros_ec_proto.c driver from include/linux/mfd/cros_ec.h to a new file include/linux/platform_data/cros_ec_proto.h - Update all the drivers with the new includes, so - Drivers that only need to know about the protocol include - linux/platform_data/cros_ec_proto.h - linux/platform_data/cros_ec_commands.h - Drivers that need to know about the cros-ec mfd device also include - linux/mfd/cros_ec.h Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Gwendal Grignou <gwendal@chromium.org> Tested-by: Gwendal Grignou <gwendal@chromium.org> Series changes: 3 - Fix dereferencing pointer to incomplete type 'struct cros_ec_dev' (lkp) Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-09-02mfd / platform: cros_ec: Move cros-ec core driver out from MFDEnric Balletbo i Serra
Now, the ChromeOS EC core driver has nothing related to an MFD device, so move that driver from the MFD subsystem to the platform/chrome subsystem. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Gwendal Grignou <gwendal@chromium.org> Tested-by: Gwendal Grignou <gwendal@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-09-01rtc: sun6i: Allow using as wakeup source from suspendAlejandro González
This patch allows userspace to set up wakeup alarms on any RTC handled by the sun6i driver, and adds the necessary PM operations to allow resuming from suspend when the configured wakeup alarm fires a IRQ. Of course, that the device actually resumes depends on the suspend state and how a particular hardware reacts to it, but that is out of scope for this patch. I've tested these changes on a Pine H64 model B, which contains a Allwinner H6 SoC, with the help of CONFIG_PM_TEST_SUSPEND kernel option. These are the interesting outputs from the kernel and commands which show that it works. As every RTC handled by this driver is largely the same, I think that it shouldn't introduce any regression on other SoCs, but I may be wrong. [ 1.092705] PM: test RTC wakeup from 'freeze' suspend [ 1.098230] PM: suspend entry (s2idle) [ 1.212907] PM: suspend devices took 0.080 seconds (The SoC freezes for some seconds) [ 3.197604] PM: resume devices took 0.104 seconds [ 3.215937] PM: suspend exit [ 1.092812] PM: test RTC wakeup from 'mem' suspend [ 1.098089] PM: suspend entry (deep) [ 1.102033] PM: suspend exit [ 1.105205] PM: suspend test failed, error -22 In any case, the RTC alarm interrupt gets fired as exptected: $ echo +5 > /sys/class/rtc/rtc0/wakealarm && sleep 5 && grep rtc /proc/interrupts 29: 1 0 0 0 GICv2 133 Level 7000000.rtc Signed-off-by: Alejandro González <alejandro.gonzalez.correo@gmail.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/r/20190821210056.11995-1-alejandro.gonzalez.correo@gmail.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-09-01rtc: pcf8563: let the core handle range offsettingAlexandre Belloni
Set the RTC range properly and use the core windowing and offsetting to (unfortunately) map back to a 1970-2069 range. Link: https://lore.kernel.org/r/20190829212547.19185-5-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-09-01rtc: pcf8563: remove useless indirectionAlexandre Belloni
pcf8563_rtc_read_time and pcf8563_set_datetime are only used after casting dev to an i2c_client. Remove that useless indirection. Link: https://lore.kernel.org/r/20190829212547.19185-4-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-09-01rtc: pcf8563: convert to devm_rtc_allocate_deviceAlexandre Belloni
This allows further improvement of the driver. Link: https://lore.kernel.org/r/20190829212547.19185-3-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-09-01rtc: pcf8563: add Microcrystal RV8564 compatibleAlexandre Belloni
Add a compatible string for the Microcrystal RV8564. Link: https://lore.kernel.org/r/20190829212547.19185-2-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-09-01rtc: pcf8563: add Epson RTC8564 compatibleAlexandre Belloni
Add a compatible string for the Epson RTC8564. Link: https://lore.kernel.org/r/20190829212547.19185-1-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-09-01rtc: s35390a: convert to devm_i2c_new_dummy_device()Wolfram Sang
I was about to simplify the call to i2c_unregister_device() when I realized that converting to devm_i2c_new_dummy_device() will simplify the driver a lot. So I took this approach. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20190830133124.21633-3-wsa+renesas@sang-engineering.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-09-01rtc: max77686: convert to devm_i2c_new_dummy_device()Wolfram Sang
I was about to simplify the call to i2c_unregister_device() when I realized that converting to devm_i2c_new_dummy_device() will simplify the driver a lot. So I took this approach. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20190830133124.21633-2-wsa+renesas@sang-engineering.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-09-01rtc: pcf85363/pcf85263: fix regmap error in set_timeBiwen Li
Issue: - # hwclock -w hwclock: RTC_SET_TIME: Invalid argument Why: - Relative commit: 8b9f9d4dc511 ("regmap: verify if register is writeable before writing operations"), this patch will always check for unwritable registers, it will compare reg with max_register in regmap_writeable. - The pcf85363/pcf85263 has the capability of address wrapping which means if you access an address outside the allowed range (0x00-0x2f) hardware actually wraps the access to a lower address. The rtc-pcf85363 driver will use this feature to configure the time and execute 2 actions in the same i2c write operation (stopping the clock and configure the time). However the driver has also configured the `regmap maxregister` protection mechanism that will block accessing addresses outside valid range (0x00-0x2f). How: - Split of writing regs to two parts, first part writes control registers about stop_enable and resets, second part writes RTC time and date registers. Signed-off-by: Biwen Li <biwen.li@nxp.com> Link: https://lore.kernel.org/r/20190829021418.4607-1-biwen.li@nxp.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-09-01rtc: snvs: switch to rtc_time64_to_tm/rtc_tm_to_time64Alexandre Belloni
Call the 64bit versions of rtc_tm time conversion now that the range is enforced by the core. Link: https://lore.kernel.org/r/20190828205056.31321-2-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-09-01rtc: snvs: set rangeAlexandre Belloni
The SNVS is a 47-bit counter incremented at 32768Hz, it is then a 32-bit second counter. Link: https://lore.kernel.org/r/20190828205056.31321-1-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-29rtc: snvs: fix possible race conditionAnson Huang
The RTC IRQ is requested before the struct rtc_device is allocated, this may lead to a NULL pointer dereference in IRQ handler. To fix this issue, allocating the rtc_device struct before requesting the RTC IRQ using devm_rtc_allocate_device, and use rtc_register_device to register the RTC device. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Link: https://lore.kernel.org/r/20190716071858.36750-1-Anson.Huang@nxp.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-27rtc: pcf2127: bugfix: watchdog build dependencyBruno Thomsen
Disable watchdog registation when kernel is build without watchdog functionality, and enable watchdog core otherwise. This removes compile errors like the one below: drivers/rtc/rtc-pcf2127.o: in function `pcf2127_probe.constprop.3': rtc-pcf2127.c:(.text.unlikely+0x2c8): undefined reference to `devm_watchdog_register_device' Watchdog feature in chip will always be configured as this is safe to do in both cases and minimize code churn. Reported-by: Hulk Robot <hulkci@huawei.com> Reported-by: YueHaibing <yuehaibing@huawei.com> Fixes: bbc597561ce1 ("rtc: pcf2127: add watchdog feature support") Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com> Link: https://lore.kernel.org/r/20190827143656.4734-1-bruno.thomsen@gmail.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-27rtc: pcf2127: add tamper detection supportBruno Thomsen
Add support for integrated tamper detection function in both PCF2127 and PCF2129 chips. This patch implements the feature by adding an additional timestamp0 file to sysfs device path. This file contains seconds since epoch, if an event occurred, or is empty, if none occurred. Interface should match ISL1208 and RV3028 RTC drivers. Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com> Link: https://lore.kernel.org/r/20190822131936.18772-5-bruno.thomsen@gmail.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-27rtc: pcf2127: add watchdog feature supportBruno Thomsen
Add partial support for the watchdog functionality of both PCF2127 and PCF2129 chips. The programmable watchdog timer is currently using a fixed clock source of 1Hz. This result in a selectable range of 1-255 seconds, which covers most embedded Linux use-cases. Clock sources of 4096Hz, 64Hz and 1/60Hz is mostly useful in MCU use-cases. Countdown timer not available when using watchdog feature. Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190822131936.18772-4-bruno.thomsen@gmail.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-23rtc: pcf2127: bugfix: read rtc disables watchdogBruno Thomsen
The previous fix listed bulk read of registers as root cause of accendential disabling of watchdog, since the watchdog counter register (WD_VAL) was zeroed. Fixes: 3769a375ab83 rtc: pcf2127: bulk read only date and time registers. Tested with the same PCF2127 chip as Sean reveled root cause of WD_VAL register value zeroing was caused by reading CTRL2 register which is one of the watchdog feature control registers. So the solution is to not read the first two control registers (CTRL1 and CTRL2) in pcf2127_rtc_read_time as they are not needed anyway. Size of local buf variable is kept to allow easy usage of register defines to improve readability of code. Debug trace line was updated after CTRL1 and CTRL2 are no longer read from the chip. Also replaced magic numbers in buf access with register defines. Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com> Link: https://lore.kernel.org/r/20190822131936.18772-3-bruno.thomsen@gmail.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-23rtc: pcf2127: cleanup register and bit definesBruno Thomsen
Cleanup of defines to follow kernel coding style and increase code readability by using same register and bit define style. Change PCF2127_REG_RAM_{addr_MSB,wrt_cmd,rd_cmd} to upper case as kernel coding guide section 12 'Macros, Enums and RTL' states "Names of macros defining constants and labels in enums are capitalized". Improve readability of RAM register comment by making whole sentences. Remove parentheses from register defines as they are only used for expressions and not constants. As there are no clear style for name of registers and bits in the kernel drivers, I suggest the following for at least this driver, but hopefully also other RTC drivers. Register name should follow this convention: [chip]_REG_[reg name] 0xXX Bit name should follow this convention, so it clearly states which chip register it's part of: [chip]_BIT_[reg name]_[bit name] BIT(X) Additionally I suggest bit defines are always placed right below its corresponding register define and using an extra tab indentation for the BIT(X) part. This will visually make it easy to see that bit defines are part of the complete register definition. Rename PCF2127_OSF to PCF2127_BIT_SC_OSF and move it right below PCF2127_REG_SC. This will improve readability of bit checks as it's easy to verify that it uses the correct register. Move end of line comments above register defines as it's more like a heading for 1 register define and up to 8 bit defines or a collection of registers that are close related like timestamp split across 6 registers. Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com> Link: https://lore.kernel.org/r/20190822131936.18772-2-bruno.thomsen@gmail.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-23rtc: pcf2127: convert to devm_rtc_allocate_deviceBruno Thomsen
This allows further improvement of the driver. Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com> Link: https://lore.kernel.org/r/20190822131936.18772-1-bruno.thomsen@gmail.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-23rtc: sun6i: Add support for H6 RTCOndrej Jirman
RTC on H6 is mostly the same as on H5 and H3. It has slight differences mostly in features that are not yet supported by this driver. Some differences are already stated in the comments in existing code. One other difference is that H6 has extra bit in LOSC_CTRL_REG, called EXT_LOSC_EN to enable/disable external low speed crystal oscillator. It also has bit EXT_LOSC_STA in LOSC_AUTO_SWT_STA_REG, to check whether external low speed oscillator is working correctly. This patch adds support for enabling LOSC when necessary: - during reparenting - when probing the clock H6 also has capacbility to automatically reparent RTC clock from external crystal oscillator, to internal RC oscillator, if external oscillator fails. This is enabled by default. Disable it during probe. Signed-off-by: Ondrej Jirman <megous@megous.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/r/20190820151934.3860-3-megous@megous.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-23rtc: fsl-ftm-alarm: add FTM alarm driverBiwen Li
For the platforms including LS1012A, LS1021A, LS1028A, LS1043A, LS1046A, LS1088A, LS208xA that has the FlexTimer module, implementing alarm functions within RTC subsystem to wakeup the system when system going to sleep (work with RCPM driver). Signed-off-by: Biwen Li <biwen.li@nxp.com> Link: https://lore.kernel.org/r/20190813030157.48590-1-biwen.li@nxp.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-22rtc: Add Amlogic Virtual Wake RTCNeil Armstrong
The Amlogic Meson GX SoCs uses a special register to store the time in seconds to wakeup after a system suspend. In order to be able to reuse the RTC wakealarm feature, this driver implements a fake RTC device which uses the system time to deduce a suspend delay. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [khilman: rebase to v5.3-rc, rework and modernization] Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20190812232850.8016-3-khilman@kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-21rtc: rv3029: revert error handling patch to rv3029_eeprom_write()Dan Carpenter
My error handling "cleanup" was totally wrong. Both the "err" and "ret" variables are required. The "err" variable holds the error codes for rv3029_eeprom_enter/exit() and the "ret" variable holds the error codes for if actual write fails. In my patch if the write failed, the function probably still returned success. Reported-by: Tom Evans <tom.evans@motec.com.au> Fixes: 97f5b0379c38 ("rtc: rv3029: Clean up error handling in rv3029_eeprom_write()") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20190817065604.GB29951@mwanda Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-21rtc: ds1672: remove unnecessary checkAlexandre Belloni
The rtc pointer is already checked earlier, it is not necessary to check it again. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20190818215232.17320-1-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-21rtc: remove superfluous error messageAlexandre Belloni
The RTC core now has error messages in case of registration failure, there is no need to have other messages in the drivers. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20190818220041.17833-2-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-20rtc: class: add debug message when registration failsAlexandre Belloni
Add a message when __rtc_register_device fails because rtc->ops is NULL. This may only happen when developing a new driver so use dev_dbg to avoid compiling it in by default. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20190818220041.17833-1-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-20rtc: pcf2123: add proper compatible stringAlexandre Belloni
nxp,rtc-pcf2123 is not a proper compatible strong for this RTC. The part name is only pcf2123 and is less confusing. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20190819182656.29744-9-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-20rtc: pcf2123: let the core handle range offsettingAlexandre Belloni
Set the RTC range properly and use the core windowing and offsetting to (unfortunately) map back to a 1970-2069 range. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20190819182656.29744-8-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-20rtc: pcf2123: convert to devm_rtc_allocate_deviceAlexandre Belloni
This allows further improvement of the driver. Also remove the unecessary error string as the core will already display error messages. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20190819182656.29744-7-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-20rtc: pcf2123: remove useless error path gotoAlexandre Belloni
kfree_exit only returns ret, remove it. This also fixes the devm_regmap_init_spi error case where the probe wouldn't actually fail because ret is initialized to 0. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20190819182656.29744-6-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-20rtc: pcf2123: rename struct and variablesAlexandre Belloni
Rename struct pcf2123_plat_data to struct pcf2123_data and pdata to pcf2123 to make the driver use a more common subsystem style. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20190819182656.29744-5-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-20rtc: pcf2123: stop using dev.platform_dataAlexandre Belloni
platform_data is for platform specific data, use driver_data instead. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20190819182656.29744-4-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-20rtc: pcf2123: implement .alarm_irq_enableAlexandre Belloni
Implement .alarm_irq_enable so it is possible to use RTC_ALM_SET, RTC_AIE_ON and RTC_AIE_OFF. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20190819182656.29744-3-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-20rtc; pcf2123: fix possible alarm race conditionAlexandre Belloni
Clear the flag after disabling the alarm to ensure the alarm doesn't fire between clearing the flag and disabling the alarm. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20190819182656.29744-2-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-20rtc: pcf2123: don't use weekday alarmAlexandre Belloni
The week day may not be set properly by userspace. This would result is missed alarms. Disable alarm matching on weekday. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20190819182656.29744-1-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-16rtc: sun6i: Don't reference clk_init_data after registrationStephen Boyd
A future patch is going to change semantics of clk_register() so that clk_hw::init is guaranteed to be NULL after a clk is registered. Avoid referencing this member here so that we don't run into NULL pointer exceptions. Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Chen-Yu Tsai <wens@csie.org> Reported-by: "kernelci.org bot" <bot@kernelci.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lkml.kernel.org/r/20190815160020.183334-4-sboyd@kernel.org Acked-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-13rtc: Remove dev_err() usage after platform_get_irq()Stephen Boyd
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: linux-rtc@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20190730181557.90391-40-swboyd@chromium.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-12rtc: mxc: use spin_lock_irqsave instead of spin_lock_irq in IRQ contextFuqian Huang
As spin_unlock_irq will enable interrupts. mxc_rtc_irq_enable is called from interrupt handler mxc_rtc_interrupt. Interrupts are enabled in interrupt handler. Use spin_lock_irqsave/spin_unlock_irqrestore instead of spin_(un)lock_irq in IRQ context to avoid this. Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Link: https://lore.kernel.org/r/20190807082310.10135-1-huangfq.daxian@gmail.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-12rtc: bd70528: fix driver dependenciesMatti Vaittinen
With CONFIG_BD70528_WATCHDOG=m, a built-in rtc driver cannot call into the low-level functions that are part of the watchdog module: drivers/rtc/rtc-bd70528.o: In function `bd70528_set_time': rtc-bd70528.c:(.text+0x22c): undefined reference to `bd70528_wdt_lock' rtc-bd70528.c:(.text+0x2a8): undefined reference to `bd70528_wdt_unlock' drivers/rtc/rtc-bd70528.o: In function `bd70528_set_rtc_based_timers': rtc-bd70528.c:(.text+0x50c): undefined reference to `bd70528_wdt_set' Add a Kconfig dependency which forces RTC to be a module if watchdog is a module. If watchdog is not compiled at all the stub functions for watchdog control are used. compiling the RTC without watchdog is fine. Fixes: 32a4a4ebf768 ("rtc: bd70528: Initial support for ROHM bd70528 RTC") Suggested-by: Arnd Bergmann <arnd@arndb.de> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/84462e01e43d39024948a3bdd24087ff87dc2255.1565591387.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-12rtc: remove w90x900/nuc900 driverArnd Bergmann
The ARM w90x900 platform is getting removed, so this driver is obsolete. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20190809202749.742267-15-arnd@arndb.de Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-07-31docs: i2c: convert to ReST and add to driver-api booksetMauro Carvalho Chehab
Convert each file at I2C subsystem, renaming them to .rst and adding to the driver-api book. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-07-30drivers: Introduce device lookup variants by nameSuzuki K Poulose
Add a helper to match the device name for device lookup. Also reuse this generic exported helper for the existing bus_find_device_by_name(). and add similar variants for driver/class. Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexander Aring <alex.aring@gmail.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dan Murphy <dmurphy@ti.com> Cc: Harald Freudenberger <freude@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: linux-leds@vger.kernel.org Cc: linux-rtc@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: linux-wpan@vger.kernel.org Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Peter Oberparleiter <oberpar@linux.ibm.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Stefan Schmidt <stefan@datenfreihafen.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20190723221838.12024-2-suzuki.poulose@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-23rtc: s5m: convert to i2c_new_dummy_deviceWolfram Sang
Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an ERRPTR which we use in error handling. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20190722172618.4061-5-wsa+renesas@sang-engineering.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 16:24:52 +0000