summaryrefslogtreecommitdiff
path: root/drivers/rtc
AgeCommit message (Collapse)Author
2020-10-19rtc: r9701: stop setting RWKCNTAlexandre Belloni
tm_wday is never checked for validity and it is not read back in r9701_get_datetime. Avoid setting it to stop tripping static checkers: drivers/rtc/rtc-r9701.c:109 r9701_set_datetime() error: undefined (user controlled) shift '1 << dt->tm_wday' Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201015191135.471249-4-alexandre.belloni@bootlin.com
2020-10-19rtc: r9701: remove useless memsetAlexandre Belloni
The RTC core already sets to zero the struct rtc_tie it passes to the driver, avoid doing it a second time. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201015191135.471249-3-alexandre.belloni@bootlin.com
2020-10-19rtc: r9701: stop setting a default timeAlexandre Belloni
It doesn't make sense to set the RTC to a default value at probe time. Let the core handle invalid date and time. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201015191135.471249-2-alexandre.belloni@bootlin.com
2020-10-19rtc: r9701: remove leftover commentAlexandre Belloni
Commit 22652ba72453 ("rtc: stop validating rtc_time in .read_time") removed the code but not the associated comment. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201015191135.471249-1-alexandre.belloni@bootlin.com
2020-10-19rtc: rv3032: Add a driver for Microcrystal RV-3032Alexandre Belloni
New driver for the Microcrystal RV-3032, including support for: - Date/time - Alarms - Low voltage detection - Trickle charge - Trimming - Clkout - RAM - EEPROM - Temperature sensor Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201013144110.1942218-3-alexandre.belloni@bootlin.com
2020-10-15rtc: rv3028: ensure ram configuration registers are savedAlexandre Belloni
If RV3028_CTRL1_EERD is not set (this is the default), the RTC will refresh the RAM configuration registers from the EEPROM at midnight. It is necessary to save the RAM registers back to EEPROM after modifying them. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201009153101.721149-4-alexandre.belloni@bootlin.com
2020-10-15rtc: rv3028: factorize EERD bit handlingAlexandre Belloni
Both rv3028_eeprom_write and rv3028_eeprom_read enable EERD before sending commands to the EEPROM and restore it afterwards. Factorize this code. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201009153101.721149-3-alexandre.belloni@bootlin.com
2020-10-15rtc: rv3028: fix trickle resistor valuesAlexandre Belloni
Version 1.0 of the application manual had the wrong resistor values. Fix them according to version 1.1 Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201009153101.721149-2-alexandre.belloni@bootlin.com
2020-10-15rtc: rv3028: fix clock output supportAlexandre Belloni
rv3028_clkout_set_rate unconditionally sets RV3028_CLKOUT_CLKOE but clk_set_rate may be called with the clock disabled. Ensure the clock is kept disabled if it was not yet enabled. Also, the actual rate was overwritten when enabling the clock, properly write to the register only once. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201009153101.721149-1-alexandre.belloni@bootlin.com
2020-10-15rtc: mt6397: Remove unused member devFei Shao
Removing the struct member "dev" in mt6397 RTC driver because it's not initialized and the only usage is for one debugging message. Also fixed a typo in the error message. Signed-off-by: Fei Shao <fshao@chromium.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201008093414.1911699-1-fshao@chromium.org
2020-09-29rtc: rv8803: simplify the return expression of rv8803_nvram_writeLiu Shixin
Simplify the return expression. Signed-off-by: Liu Shixin <liushixin2@huawei.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200921082449.2591981-1-liushixin2@huawei.com
2020-09-29rtc: meson: simplify the return expression of meson_vrtc_probeLiu Shixin
Simplify the return expression. Signed-off-by: Liu Shixin <liushixin2@huawei.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200919100856.1639319-1-liushixin2@huawei.com
2020-09-29rtc: rx8010: rename rx8010_init_client() to rx8010_init()Bartosz Golaszewski
Since the switch to using regmap this function no longer takes the I2C client struct as argument nor do we even interact with the client anywhere other than when creating the regmap. Rename it to a less misleading name: "rx8010_init()". Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200917114656.9036-1-brgl@bgdev.pl
2020-09-24rtc: ds1307: enable rx8130's backup battery, make it chargeable optionallyBastian Krause
The ds1307 charger infrastructure now allows to add a rx8130 charger setup that.. - does not depend on trickle-resistor-ohms - does not use DS13XX_TRICKLE_CHARGER_MAGIC trickle-charge select (TCS) bits - keeps previous no-charge behavior for device trees without aux-voltage-chargeable Make that happen. Signed-off-by: Bastian Krause <bst@pengutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200917183246.19446-9-bst@pengutronix.de
2020-09-24rtc: ds1307: consider aux-voltage-chargeableBastian Krause
Prefer aux-voltage-chargeable over trickle-diode-disable and set diode accordingly. This is then passed to the chip's appropriate charge setup function. Signed-off-by: Bastian Krause <bst@pengutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200917183246.19446-8-bst@pengutronix.de
2020-09-24rtc: ds1307: store previous charge default per chipBastian Krause
Some RTC's batteries and supercaps were charged by default until now. In contrast other RTCs allow charging but the driver did not configure them to do so until now. These must not be charged by default to stay backwards compatible. In order to do that, store the charge default per chip. Signed-off-by: Bastian Krause <bst@pengutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200917183246.19446-7-bst@pengutronix.de
2020-09-24rtc: ds1307: introduce requires_trickle_resistor per chipBastian Krause
Make trickle-resistor-ohms optional for charging setups that do not require specifying ROUT bits (specifying the resistor value between Vcc and Vbackup). In order to allow specifying that, introduce requires_trickle_resistor per chip. Signed-off-by: Bastian Krause <bst@pengutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200917183246.19446-6-bst@pengutronix.de
2020-09-24rtc: ds1307: apply DS13XX_TRICKLE_CHARGER_MAGIC only conditionallyBastian Krause
DS13XX_TRICKLE_CHARGER_MAGIC sets the trickle-charge select (TCS) bits (7..4). The datasheet of Maxim Integrated's DS1339 [1] for instance reads: "To prevent accidental enabling, only a pattern on 1010 enables the trickle charger. All other patterns disable the trickle charger." Since not all RTCs connected to a backup battery or supercap use these bits DS13XX_TRICKLE_CHARGER_MAGIC should not get applied for all charger setups unconditionally. Epson's RX8130 is such an example: Instead of TCS bits "SMPTSEL1", "SMPTSEL0", "CHGEN" and "INIEN" are expected as bit 7..4. DS1339 and DS1340 are currently the only RTCs in the ds1307 driver that apply DS13XX_TRICKLE_CHARGER_MAGIC to their setup register value. So apply DS13XX_TRICKLE_CHARGER_MAGIC in do_trickle_setup_ds1339() which is used by both RTCs. [1] https://datasheets.maximintegrated.com/en/ds/DS1339-DS1339U.pdf [2] https://support.epson.biz/td/api/doc_check.php?dl=app_RX8130CE Signed-off-by: Bastian Krause <bst@pengutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200917183246.19446-5-bst@pengutronix.de
2020-09-15rtc: pcf2127: fix a bug when not specify interrupts propertyBiwen Li
Fix a bug when not specify interrupts property in dts as follows, rtc-pcf2127-i2c 1-0051: failed to request alarm irq rtc-pcf2127-i2c: probe of 1-0051 failed with error -22 Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200915073213.12779-1-biwen.li@oss.nxp.com
2020-09-15rtc: ds1685: Fix bank switching to avoid endless loopThomas Bogendoerfer
ds1685_rtc_begin_data_access() tried to access an extended register before enabling access to it by switching to bank 1. Depending on content in NVRAM this could lead to an endless loop. While at it fix also switch back to bank 0 in ds1685_rtc_end_data_access(). Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Joshua Kinard <kumba@gentoo.org> Link: https://lore.kernel.org/r/20200910084124.138560-1-tsbogend@alpha.franken.de
2020-09-15rtc: st-lpc: Constify st_rtc_opsRikard Falkeborn
The only usage of st_rtc_ops is to assign its address to the ops field in the rtc_device struct. which is a const pointer. Make it const to allow the compiler to put it in read-only memory. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200913122644.35515-1-rikard.falkeborn@gmail.com
2020-09-15rtc: rx8010: use range checking provided by core RTC codeBartosz Golaszewski
We don't need to check the time range manually in set_time(), we can use range_min and range_max exposed by struct rtc_device. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200914154601.32245-15-brgl@bgdev.pl
2020-09-15rtc: rx8010: convert to using regmapBartosz Golaszewski
This driver requires SMBUS to work. We can relax this requirement if we switch to using i2c regmap and let the regmap sub-system figure out how to talk to the bus. This also has the advantage of shrinking the code for register updates. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200914154601.32245-14-brgl@bgdev.pl
2020-09-15rtc: rx8010: switch to using the preferred i2c APIBartosz Golaszewski
We should generally use probe_new instead of probe when registering i2c drivers. Convert rx8010 to using it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200914154601.32245-13-brgl@bgdev.pl
2020-09-15rtc: rx8010: switch to using the preferred RTC APIBartosz Golaszewski
Use devm_rtc_allocate_device() + rtc_register_device() instead of the deprecated devm_rtc_device_register(). Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200914154601.32245-12-brgl@bgdev.pl
2020-09-15rtc: rx8010: prefer sizeof(*val) over sizeof(struct type_of_val)Bartosz Golaszewski
Using the size of the variable is preferred over using the size of its type when allocating memory. Convert the call to devm_kzalloc() in probe(). Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200914154601.32245-11-brgl@bgdev.pl
2020-09-15rtc: rx8010: use a helper variable for client->dev in probe()Bartosz Golaszewski
Simple 'dev' looks better then repeated &client->dev and has the added benefit of avoiding unnecessary line breaks. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200914154601.32245-10-brgl@bgdev.pl
2020-09-15rtc: rx8010: drop unnecessary initializationBartosz Golaszewski
The 'err' local variable in rx8010_init_client() doesn't need to be initialized. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200914154601.32245-9-brgl@bgdev.pl
2020-09-15rtc: rx8010: don't use magic values for time buffer lengthBartosz Golaszewski
The time buffer len is used directly in this driver. For readability it's better to define it as the difference between the date register offsets and use sizeof() whenever referencing it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200914154601.32245-8-brgl@bgdev.pl
2020-09-15rtc: rx8010: rename ret to err in rx8010_set_time()Bartosz Golaszewski
All other functions in this driver use 'err' for integer return values. Do the same in rx8010_set_time() for consistency. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200914154601.32245-7-brgl@bgdev.pl
2020-09-15rtc: rx8010: use tabs instead of spaces for code formattingBartosz Golaszewski
The define values in this driver are close to their names and they are separated by spaces. Use tabs instead and align all defines. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200914154601.32245-6-brgl@bgdev.pl
2020-09-15rtc: rx8010: consolidate local variables of the same typeBartosz Golaszewski
Move local variables of the same type into a single line for better readability. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200914154601.32245-5-brgl@bgdev.pl
2020-09-15rtc: rx8010: remove unnecessary bracketsBartosz Golaszewski
Remove brackets wherever they guard a single line. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200914154601.32245-4-brgl@bgdev.pl
2020-09-15rtc: rx8010: remove a stray newlineBartosz Golaszewski
Remove an unnecessary newline after requesting the interrupt. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200914154601.32245-3-brgl@bgdev.pl
2020-09-15rtc: rx8010: don't modify the global rtc opsBartosz Golaszewski
The way the driver is implemented is buggy for the (admittedly unlikely) use case where there are two RTCs with one having an interrupt configured and the second not. This is caused by the fact that we use a global rtc_class_ops struct which we modify depending on whether the irq number is present or not. Fix it by using two const ops structs with and without alarm operations. While at it: not being able to request a configured interrupt is an error so don't ignore it and bail out of probe(). Fixes: ed13d89b08e3 ("rtc: Add Epson RX8010SJ RTC driver") Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200914154601.32245-2-brgl@bgdev.pl
2020-09-15rtc: s3c: Simplify with dev_err_probe()Krzysztof Kozlowski
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200830080937.14367-1-krzk@kernel.org
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-21rtc: fsl-ftm-alarm: update acpi device idPeng Ma
Original device id would conflict with crypto driver, change it. Signed-off-by: Peng Ma <peng.ma@nxp.com> Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200818063609.39859-1-ran.wang_1@nxp.com
2020-08-21rtc: ds1307: Clear OSF flag on DS1388 when setting timeChris Packham
Ensure the OSF flag is cleared on the DS1388 when the clock is set. Fixes: df11b323b16f ("rtc: ds1307: handle oscillator failure flags for ds1388 variant") Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200818013543.4283-1-chris.packham@alliedtelesis.co.nz
2020-08-21rtc: ds1307: Ensure oscillator is enabled for DS1388Chris Packham
Similar to the other variants the DS1388 has a bit to stop the oscillator to reduce the power consumption from VBAT. Ensure that the oscillator is enabled when the system is up. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200816235731.21071-1-chris.packham@alliedtelesis.co.nz
2020-08-21rtc: rtc-rs5c313: Convert to module_platform_driver()Geert Uytterhoeven
Reduce boilerplate by using the module_platform_driver() helper. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200814110731.29029-4-geert+renesas@glider.be
2020-08-21rtc: rtc-rs5c313: Fix late hardware initGeert Uytterhoeven
rs5c313_rtc_init() calls platform_driver_register(), and initializes the hardware. This is wrong because of two reasons: 1. As soon as the driver has been registered, the device may be probed. If devm_rtc_device_register() is called before hardware initialization, reading the current time will fail: rs5c313 rs5c313: rs5c313_rtc_read_time: timeout error rs5c313 rs5c313: registered as rtc0 rs5c313 rs5c313: rs5c313_rtc_read_time: timeout error rs5c313 rs5c313: hctosys: unable to read the hardware clock 2. If the platform device does not exist, the driver will still write to a hardware device that may not be present. Fix this by moving the hardware initialization sequence to the driver's .probe() method. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200814110731.29029-3-geert+renesas@glider.be
2020-08-21rtc: rtc-rs5c313: Drop obsolete platform_set_drvdata() callGeert Uytterhoeven
Commit 284e2fa1da00a998 ("rtc: rtc-rs5c313: use devm_rtc_device_register()"), removed the last user of the driver-specific data. Hence there is no longer a need to set it. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200814110731.29029-2-geert+renesas@glider.be
2020-08-21rtc: cmos: zero-init wkalrm when reading from CMOSVictor Ding
cmos_read_alarm() may leave certain fields of a struct rtc_wkalrm untouched; therefore, these fields contain garbage if not properly initialized, leading to inconsistent values when converting into time64_t. This patch to zero initialize the struct before calling cmos_read_alarm(). Note that this patch is not intended to produce a correct time64_t, it is only to produce a consistent value. In the case of suspend/resume, a correct time64_t is not necessary; a consistent value is sufficient to correctly perform an equality test for t_current_expires and t_saved_expires. Logic to deduce a correct time64_t is expensive and hence should be avoided. Signed-off-by: Victor Ding <victording@google.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200814191654.v2.1.Iaf7638a2f2a87ff68d85fcb8dec615e41340c97f@changeid
2020-08-12Merge tag 'rtc-5.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "Not much this cycle - mostly non urgent driver fixes: - ds1374: use watchdog core - pcf2127: add alarm and pcf2129 support" * tag 'rtc-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: pcf2127: fix alarm handling rtc: pcf2127: add alarm support rtc: pcf2127: add pca2129 device id rtc: max77686: Fix wake-ups for max77620 rtc: ds1307: provide an indication that the watchdog has fired rtc: ds1374: remove unused define rtc: ds1374: fix RTC_DRV_DS1374_WDT dependencies rtc: cleanup obsolete comment about struct rtc_class_ops rtc: pl031: fix set_alarm by adding back call to alarm_irq_enable rtc: ds1374: wdt: Use watchdog core for watchdog part rtc: Replace HTTP links with HTTPS ones rtc: goldfish: Enable interrupt in set_alarm() when necessary rtc: max77686: Do not allow interrupt to fire before system resume rtc: imxdi: fix trivial typos rtc: cpcap: fix range
2020-08-12rtc: pcf2127: fix alarm handlingAlexandre Belloni
Fix multiple issues when handling alarms: - Use threaded interrupt to avoid scheduling when atomic - Stop matching on week day as it may not be set correctly - Avoid parsing the DT interrupt and use what is provided by the i2c or spi subsystem - Avoid returning IRQ_NONE in case of error in the interrupt handler - Never write WDTF as specified in the datasheet - Set uie_unsupported, as for the pcf85063, setting alarms every seconds is not working correctly and confuses the RTC. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200812085114.474903-1-alexandre.belloni@bootlin.com
2020-08-12rtc: pcf2127: add alarm supportLiam Beguin
Add alarm support for the pcf2127 RTC chip family. Tested on pca2129. Signed-off-by: Liam Beguin <lvb@xiphos.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com> Link: https://lore.kernel.org/r/20200630024211.12782-3-liambeguin@gmail.com
2020-08-12rtc: pcf2127: add pca2129 device idLiam Beguin
The PCA2129 is the automotive grade version of the PCF2129. add it to the list of compatibles. Signed-off-by: Liam Beguin <lvb@xiphos.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com> Link: https://lore.kernel.org/r/20200630024211.12782-2-liambeguin@gmail.com
2020-08-07rtc: max77686: Fix wake-ups for max77620Jon Hunter
Following commit d8f090dbeafd ("rtc: max77686: Do not allow interrupt to fire before system resume"), RTC wake-ups stopped working on Jetson TX2 and Jetson Xavier platforms. The Jetson TX2 uses the max77620 PMIC and the Jetson Xavier uses max20024 PMIC. Both of these PMICs have the same max77620 RTC controller. For the max77620 RTC, the variable 'rtc_irq_from_platform' is defined as true in the max77686 driver and because of this the IRQ passed to the max77686 driver for RTC is the PMIC IRQ and not the parent. Hence, following commit d8f090dbeafd ("rtc: max77686: Do not allow interrupt to fire before system resume"), for the max77620 the RTC IRQ within the PMIC is now getting disabled on entry to suspend and unable to wake the system up. Fix this by only disabling interrupts on entry to suspend in the max77686 RTC driver, if the interrupt is the parent interrupt. Fixes: d8f090dbeafd ("rtc: max77686: Do not allow interrupt to fire before system resume") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Tested-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200806125431.699339-1-jonathanh@nvidia.com
2020-08-05rtc: ds1307: provide an indication that the watchdog has firedChris Packham
There's not much feedback when the ds1388 watchdog fires. Generally it yanks on the reset line and the board reboots. Capture the fact that the watchdog has fired in the past so that userspace can retrieve it via WDIOC_GETBOOTSTATUS. This should help distinguish a watchdog triggered reset from a power interruption. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200727034615.19755-1-chris.packham@alliedtelesis.co.nz
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 04:27:07 +0000