summaryrefslogtreecommitdiff
path: root/drivers/rtc/rtc-pcf8563.c
AgeCommit message (Collapse)Author
2021-06-20rtc: pcf8563: Fix the datasheet URLFabio Estevam
The current datasheet URL is no longer valid. Replace with a valid one. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210603143447.2223353-3-festevam@gmail.com
2021-02-13rtc: pcf8563: Add NXP PCA8565 compatibleMarek Vasut
The NXP PCA8565 is software compatible with the NXP PCF8563, add DT and ACPI compatible entries. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> To: linux-rtc@vger.kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210210220623.23233-1-marex@denx.de
2020-11-19rtc: rework rtc_register_device() resource managementBartosz Golaszewski
rtc_register_device() is a managed interface but it doesn't use devres by itself - instead it marks an rtc_device as "registered" and the devres callback for devm_rtc_allocate_device() takes care of resource release. This doesn't correspond with the design behind devres where managed structures should not be aware of being managed. The correct solution here is to register a separate devres callback for unregistering the device. While at it: rename rtc_register_device() to devm_rtc_register_device() and add it to the list of managed interfaces in devres.rst. This way we can avoid any potential confusion of driver developers who may expect there to exist a corresponding unregister function. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201109163409.24301-8-brgl@bgdev.pl
2019-12-23rtc: pcf8563: Use BITNobuhiro Iwamatsu
Replace (1 << ...) with BIT(). CC: Alessandro Zummo <a.zummo@towertech.it> CC: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Link: https://lore.kernel.org/r/20191218082553.3309554-1-iwamatsu@nigauri.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-12-18rtc: pcf8563: return meaningful value for RTC_VL_READAlexandre Belloni
PCF8563_SC_LV means the voltage dropped too low and data has been lost. Link: https://lore.kernel.org/r/20191214220259.621996-10-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-12-18rtc: pcf8563: stop caching voltage_lowAlexandre Belloni
voltage_low is only updated when reading the time, this means that using RTC_VL_READ will miss the VL flag if the time has not been read before using the ioctl. Always read the status from the hardware. Link: https://lore.kernel.org/r/20191214220259.621996-9-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-12-18rtc: pcf8563: remove conditional compilationAlexandre Belloni
Always compile pcf8563_rtc_ioctl as we are sure that CONFIG_RTC_INTF_DEV is selected on actual kernel configurations. Link: https://lore.kernel.org/r/20191214220259.621996-8-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-12-18rtc: pcf8563: remove RTC_VL_CLR handlingAlexandre Belloni
Remove RTC_VL_CLR handling because it is a disservice to userspace as it removes the important information that the RTC data is invalid. This may lead userspace to set an invalid system time later on. Link: https://lore.kernel.org/r/20191214220259.621996-7-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-11-15rtc: pcf8563: Constify clkout_ratesNobuhiro Iwamatsu
The lates of clockout should be marked const. Make that so. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Link: https://lore.kernel.org/r/20191108002449.15097-1-iwamatsu@nigauri.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-09-01rtc: pcf8563: let the core handle range offsettingAlexandre Belloni
Set the RTC range properly and use the core windowing and offsetting to (unfortunately) map back to a 1970-2069 range. Link: https://lore.kernel.org/r/20190829212547.19185-5-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-09-01rtc: pcf8563: remove useless indirectionAlexandre Belloni
pcf8563_rtc_read_time and pcf8563_set_datetime are only used after casting dev to an i2c_client. Remove that useless indirection. Link: https://lore.kernel.org/r/20190829212547.19185-4-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-09-01rtc: pcf8563: convert to devm_rtc_allocate_deviceAlexandre Belloni
This allows further improvement of the driver. Link: https://lore.kernel.org/r/20190829212547.19185-3-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-09-01rtc: pcf8563: add Microcrystal RV8564 compatibleAlexandre Belloni
Add a compatible string for the Microcrystal RV8564. Link: https://lore.kernel.org/r/20190829212547.19185-2-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-09-01rtc: pcf8563: add Epson RTC8564 compatibleAlexandre Belloni
Add a compatible string for the Epson RTC8564. Link: https://lore.kernel.org/r/20190829212547.19185-1-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-07-17Merge tag 'rtc-5.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "A quiet cycle this time. - ds1307: properly handle oscillator failure flags - imx-sc: alarm support - pcf2123: alarm support, correct offset handling - sun6i: add R40 support - simplify getting the adapter of an i2c client" * tag 'rtc-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (37 commits) rtc: wm831x: Add IRQF_ONESHOT flag rtc: stm32: remove one condition check in stm32_rtc_set_alarm() rtc: pcf2123: Fix build error rtc: interface: Change type of 'count' from int to u64 rtc: pcf8563: Clear event flags and disable interrupts before requesting irq rtc: pcf8563: Fix interrupt trigger method rtc: pcf2123: fix negative offset rounding rtc: pcf2123: add alarm support rtc: pcf2123: use %ptR rtc: pcf2123: port to regmap rtc: pcf2123: remove sysfs register view rtc: rx8025: simplify getting the adapter of a client rtc: rx8010: simplify getting the adapter of a client rtc: rv8803: simplify getting the adapter of a client rtc: m41t80: simplify getting the adapter of a client rtc: fm3130: simplify getting the adapter of a client rtc: tegra: Drop MODULE_ALIAS rtc: sun6i: Add R40 compatible dt-bindings: rtc: sun6i: Add the R40 RTC compatible dt-bindings: rtc: Convert Allwinner A31 RTC to a schema ...
2019-06-20rtc: pcf8563: Clear event flags and disable interrupts before requesting irqChen-Yu Tsai
Besides the alarm, the PCF8563 also has a timer triggered interrupt. In cases where the previous system left the timer and interrupts on, or somehow the bits got enabled, the interrupt would keep triggering as the kernel doesn't know about it. Clear both the alarm and timer event flags, and disable the interrupts, before requesting the interrupt line. Fixes: ede3e9d47cca ("drivers/rtc/rtc-pcf8563.c: add alarm support") Fixes: a45d528aab8b ("rtc: pcf8563: clear expired alarm at boot time") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-06-20rtc: pcf8563: Fix interrupt trigger methodChen-Yu Tsai
The PCF8563 datasheet says the interrupt line is active low and stays active until the events are cleared, i.e. a level trigger interrupt. Fix the flags used to request the interrupt. Fixes: ede3e9d47cca ("drivers/rtc/rtc-pcf8563.c: add alarm support") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-09rtc: pcf8563: don't alway enable the alarmAlexandre Belloni
Allow setting the alarm and later enable it instead of enabling it unconditionally. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-11-09rtc: pcf8563: fix output clock ratePhilipp Zabel
The pcf8563_clkout_recalc_rate function erroneously ignores the frequency index read from the CLKO register and always returns 32768 Hz. Fixes: a39a6405d5f9 ("rtc: pcf8563: add CLKOUT to common clock framework") Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-06-03rtc: pcf8563: avoid using rtc->nameAlexandre Belloni
pcf8563->rtc->name is a copy of pcf8563_driver.driver.name, use it instead Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-19rtc: explicitly set tm_sec = 0 for drivers with minute accurancyUwe Kleine-König
Since all time members of the alarm data is initialized to -1 the drivers are responsible to set the tm_sec member to 0. Fixes: d68778b80dd7 ("rtc: initialize output parameter for read alarm to "uninitialized"") Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-09rtc: simplify implementations of read_alarmUwe Kleine-König
Since commit d68778b80dd7 ("rtc: initialize output parameter for read alarm to "uninitialized"") there is no need to explicitly set unsupported members to -1. So drop the respective assignments from drivers. Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-05-20rtc: pcf8563: Remove CLK_IS_ROOTStephen Boyd
This flag is a no-op now (see commit 47b0eeb3dc8a "clk: Deprecate CLK_IS_ROOT", 2016-02-02) so remove it. Cc: Heiko Schocher <hs@denx.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Heiko Schocher <hs@denx.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-05-20rtc: remove useless DRV_VERSIONAlexandre Belloni
Many drivers are defining a DRV_VERSION. This is often only used for MODULE_VERSION and sometimes to print an info message at probe time. This is kind of pointless as they are all versionned with the kernel anyway. Also the core will print a message when a new rtc is found. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-11-08rtc: pcf8563: add CLKOUT to common clock frameworkHeiko Schocher
Add the clkout output clk to the common clock framework. Disable the CLKOUT of the RTC after power-up. After power-up/reset of the RTC, CLKOUT is enabled by default, with CLKOUT enabled the RTC chip has 2-3 times higher power consumption. Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05rtc: Drop owner assignment from i2c_driverKrzysztof Kozlowski
i2c_driver does not need to set an owner because i2c_register_driver() will set it. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-06-25rtc: pfc8563: fix uninitialized variable warningArnd Bergmann
Gcc is unable to prove that alm_pending is always initialized when it is used, so it prints a harmless warning: drivers/rtc/rtc-pcf8563.c: In function 'pcf8563_probe': drivers/rtc/rtc-pcf8563.c:449:5: warning: 'alm_pending' may be used uninitialized in this function [-Wmaybe-uninitialized] This uses the same conditional expression that is used inside of the pcf8563_get_alarm_mode() function, to help gcc figure it out and shut up that warning, and make the ARM defconfigs build again with no warnings. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: a45d528aab8b ("rtc: pcf8563: clear expired alarm at boot time") Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-06-25rtc: pcf8563: Replace deprecated rtc_time_to_tm() and rtc_tm_to_time()Xunlei Pang
pcf8563_rtc_set_alarm() uses deprecated rtc_tm_to_time() and rtc_time_to_tm(), which will overflow in year 2106 on 32-bit machines. This patch solves this by: - Replacing rtc_time_to_tm() with rtc_time64_to_tm() - Replacing rtc_tm_to_time() with rtc_tm_to_time64() Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-06-25rtc: pcf8563 fix: return -EINVAL if we read an invalid time.Jan Kardell
Return -EINVAL if the voltage low bit is set to avoid getting a bogus time at boot. There was a comment stating that util-linux hwclock refuses to set a new time if we return an error code on read, but at least the current version do set the time as expected. Remove the comment and the check for valid time, and let the rtc core check it for us. Signed-off-by: Jan Kardell <jan.kardell@telliq.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-04-17drivers/rtc/rtc-pcf8563.c: simplify return from functionRobert Kmiec
This commit does not change any logic here. It just makes the code easier to read. This is how it looked like: If err != 0 return err; else return 0; Signed-off-by: Robert Kmiec <robert.r.kmiec@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: pcf8563: clear expired alarm at boot timeJan Kardell
In case the card is woken up of the rtc alarm, the devm_rtc_device_register function detects it as a pending alarm about a month in the future. Fix this by clearing the alarm in module probe. Signed-off-by: Jan Kardell <jan.kardell@telliq.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Vincent Donnefort <vdonnefort@gmail.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: pcf8563: save battery powerJan Kardell
According to Haoyu hym8563 datasheet this saves som power. Might be importat to battery life. And maybe it works for the NXP part as well. Signed-off-by: Jan Kardell <jan.kardell@telliq.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Vincent Donnefort <vdonnefort@gmail.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: pcf8563: handle consequeces of lacking second alarm regJan Kardell
To guarantee that a set alarm occurs in the future, the set alarm time is rounded up to the nearest minute. Also we cannot handle UIE as it requires second precision. Signed-off-by: Jan Kardell <jan.kardell@telliq.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Vincent Donnefort <vdonnefort@gmail.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: pcf8563: fix wrong time from read_alarmJan Kardell
Incorrect mask was used for hour and monthday fields. Signed-off-by: Jan Kardell <jan.kardell@telliq.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Vincent Donnefort <vdonnefort@gmail.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: pcf8563: fix write of invalid bits to ST2 regJan Kardell
The NXP datasheet says: "Bits labeled as N should always be written with logic 0." At least one of those bits is sometime read as a 1, therfore violating this rule. To fix this we mask away those bits. Signed-off-by: Jan Kardell <jan.kardell@telliq.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Vincent Donnefort <vdonnefort@gmail.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: pcf8563: remove leftover codeJan Kardell
Remove some code that was left from before block read/write was used. Signed-off-by: Jan Kardell <jan.kardell@telliq.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Vincent Donnefort <vdonnefort@gmail.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14drivers/rtc/rtc-pcf8563.c: fix pcf8563_irq() error return valueArnd Bergmann
As pointed out by Sergei Shtylyov, the pcf8563_irq function contains a bug in the error handling: an interrupt handler is not supposed to return an errno value but an 'enum irqreturn'. Let's fix this by returning IRQ_NONE in case of a communication error. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14drivers/rtc/rtc-pcf8563.c: fix uninitialized use warningArnd Bergmann
gcc-4.9 found a potential condition under which the 'pending' variable may be used uninitialized: drivers/rtc/rtc-pcf8563.c: In function 'pcf8563_irq': drivers/rtc/rtc-pcf8563.c:173:5: warning: 'pending' may be used uninitialized in this function [-Wmaybe-uninitialized] This is because in the pcf8563_get_alarm_mode() function, we check any nonzero return of pcf8563_read_block_data, but in the irq function we only check for negative values, so a possible positive value does not get detected if the compiler chooses not to inline the entire call chain. Checking for any non-zero value in the interrupt handler as well is just as correct and lets the compiler know what we are doing, without needing a bogus initialization. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08drivers/rtc/rtc-pcf8563.c: add alarm supportVincent Donnefort
This patch adds alarm support for the NXP PCF8563 chip. Signed-off-by: Vincent Donnefort <vdonnefort@gmail.com> Cc: Simon Guinot <simon.guinot@sequanux.org> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08drivers/rtc/rtc-pcf8563.c: introduce read|write_block_dataVincent Donnefort
This functions allow to factorize I2C I/O operations. Signed-off-by: Vincent Donnefort <vdonnefort@gmail.com> Cc: Simon Guinot <simon.guinot@sequanux.org> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-16drivers/rtc: Replace PTR_RET with PTR_ERR_OR_ZEROSachin Kamat
PTR_RET is now deprecated. Use PTR_ERR_OR_ZERO instead. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-07-03drivers/rtc/rtc-pcf8563.c: use PTR_RET()Sachin Kamat
Use of PTR_RET() simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03drivers/rtc/rtc-pcf8563.c: remove empty functionSachin Kamat
After the switch to devm_* functions and the removal of rtc_device_unregister(), the 'remove' function does not do anything. Delete it. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29rtc: rtc-pcf8563: use devm_*() functionsJingoo Han
Use devm_*() functions to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21drivers/rtc: remove unnecessary semicolonsPeter Senna Tschudin
Found by Coccinelle: http://coccinelle.lip6.fr/ Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-03Drivers: rtc: remove __dev* attributes.Greg Kroah-Hartman
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-06drivers/rtc/rtc-pcf8563.c: convert struct i2c_msg initialization to C99 formatShubhrajyoti D
Convert the struct i2c_msg initialization to C99 format. This makes maintaining and editing the code simpler. Also helps once other fields like transferred are added in future. Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-30drivers/rtc/rtc-pcf8563.c: add device tree supportNick Bowler
Set the of_match_table for this driver so that devices can be described in the device tree. Signed-off-by: Nick Bowler <nbowler@elliptictech.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-30drivers/rtc/rtc-pcf8563.c: set owner field in driver structNick Bowler
The owner member is supposed to be set to the module implementing the device driver, i.e., THIS_MODULE. This enables the appropriate module link in sysfs. Signed-off-by: Nick Bowler <nbowler@elliptictech.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 23:27:02 +0000