summaryrefslogtreecommitdiff
path: root/drivers/rtc/rtc-abx80x.c
AgeCommit message (Collapse)Author
2021-02-13rtc: abx80x: Add utility function for writing configuration keyKevin P. Fleming
Writing one of key two values into the configuration key register is a common operation, so a utility function has been added to provide consistent behavior and eliminate code duplication. Signed-off-by: Kevin P. Fleming <kevin+linux@km6g.us> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> To: linux-rtc@vger.kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200615105113.57770-2-kevin+linux@km6g.us
2020-11-19rtc: rework rtc_register_device() resource managementBartosz Golaszewski
rtc_register_device() is a managed interface but it doesn't use devres by itself - instead it marks an rtc_device as "registered" and the devres callback for devm_rtc_allocate_device() takes care of resource release. This doesn't correspond with the design behind devres where managed structures should not be aware of being managed. The correct solution here is to register a separate devres callback for unregistering the device. While at it: rename rtc_register_device() to devm_rtc_register_device() and add it to the list of managed interfaces in devres.rst. This way we can avoid any potential confusion of driver developers who may expect there to exist a corresponding unregister function. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201109163409.24301-8-brgl@bgdev.pl
2020-06-06rtc: abx80x: Provide debug feedback for invalid dt propertiesKevin P. Fleming
When the user provides an invalid value for tc-diode or tc-resistor generate a debug message instead of silently ignoring it. Signed-off-by: Kevin P. Fleming <kevin+linux@km6g.us> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200530122956.360689-1-kevin+linux@km6g.us
2020-05-30rtc: abx80x: Add Device Tree matching tableKevin P. Fleming
Enable automatic loading of the module when a Device Tree overlay specifies a device supported by this driver. Signed-off-by: Kevin P. Fleming <kevin+linux@km6g.us> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200528114617.166587-1-kevin+linux@km6g.us
2019-12-18rtc: abx80x: return meaningful value for RTC_VL_READAlexandre Belloni
ABX8XX_STATUS_BLF indicates the battery is low and needs to be replaced soon. Link: https://lore.kernel.org/r/20191214220259.621996-4-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-03-18rtc: abx80x: remove useless .removeAlexandre Belloni
.remove is empty, remove it. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-03-18rtc: abx80x: use rtc_add_groupAlexandre Belloni
Use rtc_add_group to add the sysfs group in a race free manner. This has the side effect of moving the files to their proper location. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-03-18rtc: abx80x: convert to SPDX identifierAlexandre Belloni
Use SPDX-License-Identifier instead of a verbose license text. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-03-04rtc: update my email addressAlexandre Belloni
Use my current email address. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-01-30rtc: abx80x: Configure reserved bits in RV1805Marek Vasut
The RV1805 uses smaller package than the AB1805, discern those two chips based on the compatible value and configure reserved bits in the RV1805 to prevent current leakage and accidental test mode entry. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> To: linux-rtc@vger.kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-12-18rtc: abx80x: Implement RTC_VL_READ,CLR ioctlsMarek Vasut
Implement standard ioctls for polling the battery status and clearing the battery low indication from userspace. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-09-12rtc: abx80x: add basic watchdog supportJeremy Gebben
The abx804 and abx805 chips have support for a simple watchdog function that can trigger an external reset. Signed-off-by: Jeremy Gebben <jgebben@sweptlaser.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-09-12rtc: abx80x: use a 'priv' struct for client dataJeremy Gebben
This will allow additional data to be tracked, for future improvements. Signed-off-by: Jeremy Gebben <jgebben@sweptlaser.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-02rtc: abx80x: remove useless messageAlexandre Belloni
It is not necessary to print a message when the time is invalid as userspace will already get an error (and an optional dev_dbg message). Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2017-10-13rtc: abx80x: solve race conditionAlexandre Belloni
There is a race condition that can happen if abx80x_probe() fails after the rtc registration succeeded. Solve that by moving the registration at the end of the probe function. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-10-13rtc: abx80x: switch to rtc_register_deviceAlexandre Belloni
This allows for future improvement of the driver. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-19rtc: abx80x: use devm_add_action_or_reset()Sudip Mukherjee
If devm_add_action() fails we are explicitly calling the cleanup to free the resources allocated. Lets use the helper devm_add_action_or_reset() and return directly in case of error, as we know that the cleanup function has been already called by the helper if there was any error. Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-25rtc: abx80x: handle the oscillator failure bitMylène Josserand
Handle the Oscillator Failure ('OF') bit from Oscillator Status register (0x1D). This bit is cleared on set_time function and is read each time the date/time is read, but only in case of XT Oscillator selection. In RC mode, this bit is always set. Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-25rtc: abx80x: handle autocalibrationMylène Josserand
The autocalibration is separated in two bits to set in Oscillator Control register (0x1c) : - OSEL bit to select the oscillator type (XT or RC). - ACAL bit to select the autocalibration type. These functionnalities are exported in sysfs entries : "oscillator" and "autocalibration". Respectively, the values are "xtal" for XT oscillator and "rc" for RC oscillator and 0 to disable the autocalibration cycle, 512 for a 512 seconds autocalibration cycle and 1024 for a cycle of 1024 seconds. Examples : Set to XT Oscillator echo xtal > /sys/class/rtc/rtc0/device/oscillator Activate an autocalibration every 512 seconds echo 512 > /sys/class/rtc/rtc0/device/autocalibration Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-11rtc: abx80x: add alarm supportAlexandre Belloni
Add alarm support to the abx80x driver. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-11rtc: abx80x: Add Microcrystal rv1805 supportAlexandre Belloni
Microcrystal RV-1805 is compatible with Abracon 1805. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05rtc: abx80x: fix RTC write bitMitja Spes
Fix RTC write bit as per application manual Cc: stable@vger.kernel.org # 4.1+ Signed-off-by: Mitja Spes <mitja@lxnav.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-05-05rtc: add rtc-abx80x, a driver for the Abracon AB x80x i2c rtcPhilippe De Muyter
This is a basic driver for the ultra-low-power Abracon AB x80x series of RTC chips. It supports in particular, the supersets AB0805 and AB1805. It allows reading and writing the time, and enables the supercapacitor/ battery charger. [arnd@arndb.de: abx805 depends on i2c] [alexandre.belloni@free-electrons.com: renam buffer from date to buf in abx80x_rtc_read_time()] Signed-off-by: Philippe De Muyter <phdm@macqel.be> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-30 02:11:43 +0000