summaryrefslogtreecommitdiff
path: root/drivers/reset/Kconfig
AgeCommit message (Collapse)Author
2021-07-10Merge tag 'arm-drivers-5.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM driver updates from Olof Johansson: - Reset controllers: Adding support for Microchip Sparx5 Switch. - Memory controllers: ARM Primecell PL35x SMC memory controller driver cleanups and improvements. - i.MX SoC drivers: Power domain support for i.MX8MM and i.MX8MN. - Rockchip: RK3568 power domains support + DT binding updates, cleanups. - Qualcomm SoC drivers: Amend socinfo with more SoC/PMIC details, including support for MSM8226, MDM9607, SM6125 and SC8180X. - ARM FFA driver: "Firmware Framework for ARMv8-A", defining management interfaces and communication (including bus model) between partitions both in Normal and Secure Worlds. - Tegra Memory controller changes, including major rework to deal with identity mappings at boot and integration with ARM SMMU pieces. * tag 'arm-drivers-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (120 commits) firmware: turris-mox-rwtm: add marvell,armada-3700-rwtm-firmware compatible string firmware: turris-mox-rwtm: show message about HWRNG registration firmware: turris-mox-rwtm: fail probing when firmware does not support hwrng firmware: turris-mox-rwtm: report failures better firmware: turris-mox-rwtm: fix reply status decoding function soc: imx: gpcv2: add support for i.MX8MN power domains dt-bindings: add defines for i.MX8MN power domains firmware: tegra: bpmp: Fix Tegra234-only builds iommu/arm-smmu: Use Tegra implementation on Tegra186 iommu/arm-smmu: tegra: Implement SID override programming iommu/arm-smmu: tegra: Detect number of instances at runtime dt-bindings: arm-smmu: Add Tegra186 compatible string firmware: qcom_scm: Add MDM9607 compatible soc: qcom: rpmpd: Add MDM9607 RPM Power Domains soc: renesas: Add support to read LSI DEVID register of RZ/G2{L,LC} SoC's soc: renesas: Add ARCH_R9A07G044 for the new RZ/G2L SoC's dt-bindings: soc: rockchip: drop unnecessary #phy-cells from grf.yaml memory: emif: remove unused frequency and voltage notifiers memory: fsl_ifc: fix leak of private memory on probe failure memory: fsl_ifc: fix leak of IO mapping on probe failure ...
2021-06-28reset: stm32mp1: remove stm32mp1 resetGabriel Fernandez
st32mp1 RCC reset driver was moved into stm32mp1 RCC clock driver. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Link: https://lore.kernel.org/r/20210617051814.12018-7-gabriel.fernandez@foss.st.com Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-07reset: berlin: support module buildJisheng Zhang
Make reset-berlin driver to be tristate module, support to build as a module, this is useful for GKI. Partially reverts commit ed4dba99cae8 ("reset: berlin: make it explicitly non-modular") Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Link: https://lore.kernel.org/r/20210607181015.5b8d3711@xhacker.debian Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2021-05-10reset: RESET_INTEL_GW should depend on X86Geert Uytterhoeven
The Intel Gateway reset controller is only present on Intel Gateway platforms. Hence add a dependency on X86, to prevent asking the user about this driver when configuring a kernel without Intel Gateway support. Fixes: c9aef213e38cde27 ("reset: intel: Add system reset controller driver") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2021-05-10reset: RESET_BRCMSTB_RESCAL should depend on ARCH_BRCMSTBGeert Uytterhoeven
The Broadcom STB RESCAL reset controller is only present on Broadcom BCM7216 platforms. Hence add a dependency on ARCH_BRCMSTB, to prevent asking the user about this driver when configuring a kernel without BCM7216 support. Also, merely enabling CONFIG_COMPILE_TEST should not enable additional code, and thus should not enable this driver by default. Fixes: 4cf176e52397853e ("reset: Add Broadcom STB RESCAL reset controller") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2021-05-10reset: mchp: sparx5: add switch reset driverSteen Hegelund
The Sparx5 Switch SoC has a number of components that can be reset indiviually, but at least the Switch Core needs to be in a well defined state at power on, when any of the Sparx5 drivers starts to access the Switch Core, this reset driver is available. The reset driver is loaded early via the postcore_initcall interface, and will then be available for the other Sparx5 drivers (SGPIO, SwitchDev etc) that are loaded next, and the first of them to be loaded can perform the one-time Switch Core reset that is needed. The driver has protection so that the system busses, DDR controller, PCI-E and ARM A53 CPU and a few other subsystems are not touched by the reset. Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2021-05-05Merge tag 'pci-v5.13-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Release OF node when pci_scan_device() fails (Dmitry Baryshkov) - Add pci_disable_parity() (Bjorn Helgaas) - Disable Mellanox Tavor parity reporting (Heiner Kallweit) - Disable N2100 r8169 parity reporting (Heiner Kallweit) - Fix RCiEP device to RCEC association (Qiuxu Zhuo) - Convert sysfs "config", "rom", "reset", "label", "index", "acpi_index" to static attributes to help fix races in device enumeration (Krzysztof Wilczyński) - Convert sysfs "vpd" to static attribute (Heiner Kallweit, Krzysztof Wilczyński) - Use sysfs_emit() in "show" functions (Krzysztof Wilczyński) - Remove unused alloc_pci_root_info() return value (Krzysztof Wilczyński) PCI device hotplug: - Fix acpiphp reference count leak (Feilong Lin) Power management: - Fix acpi_pci_set_power_state() debug message (Rafael J. Wysocki) - Fix runtime PM imbalance (Dinghao Liu) Virtualization: - Increase delay after FLR to work around Intel DC P4510 NVMe erratum (Raphael Norwitz) MSI: - Convert rcar, tegra, xilinx to MSI domains (Marc Zyngier) - For rcar, xilinx, use controller address as MSI doorbell (Marc Zyngier) - Remove unused hv msi_controller struct (Marc Zyngier) - Remove unused PCI core msi_controller support (Marc Zyngier) - Remove struct msi_controller altogether (Marc Zyngier) - Remove unused default_teardown_msi_irqs() (Marc Zyngier) - Let host bridges declare their reliance on MSI domains (Marc Zyngier) - Make pci_host_common_probe() declare its reliance on MSI domains (Marc Zyngier) - Advertise mediatek lack of built-in MSI handling (Thomas Gleixner) - Document ways of ending up with NO_MSI (Marc Zyngier) - Refactor HT advertising of NO_MSI flag (Marc Zyngier) VPD: - Remove obsolete Broadcom NIC VPD length-limiting quirk (Heiner Kallweit) - Remove sysfs VPD size checking dead code (Heiner Kallweit) - Convert VPF sysfs file to static attribute (Heiner Kallweit) - Remove unnecessary pci_set_vpd_size() (Heiner Kallweit) - Tone down "missing VPD" message (Heiner Kallweit) Endpoint framework: - Fix NULL pointer dereference when epc_features not implemented (Shradha Todi) - Add missing destroy_workqueue() in endpoint test (Yang Yingliang) Amazon Annapurna Labs PCIe controller driver: - Fix compile testing without CONFIG_PCI_ECAM (Arnd Bergmann) - Fix "no symbols" warnings when compile testing with CONFIG_TRIM_UNUSED_KSYMS (Arnd Bergmann) APM X-Gene PCIe controller driver: - Fix cfg resource mapping regression (Dejin Zheng) Broadcom iProc PCIe controller driver: - Return zero for success of iproc_msi_irq_domain_alloc() (Pali Rohár) Broadcom STB PCIe controller driver: - Add reset_control_rearm() stub for !CONFIG_RESET_CONTROLLER (Jim Quinlan) - Fix use of BCM7216 reset controller (Jim Quinlan) - Use reset/rearm for Broadcom STB pulse reset instead of deassert/assert (Jim Quinlan) - Fix brcm_pcie_probe() error return for unsupported revision (Wei Yongjun) Cavium ThunderX PCIe controller driver: - Fix compile testing (Arnd Bergmann) - Fix "no symbols" warnings when compile testing with CONFIG_TRIM_UNUSED_KSYMS (Arnd Bergmann) Freescale Layerscape PCIe controller driver: - Fix ls_pcie_ep_probe() syntax error (comma for semicolon) (Krzysztof Wilczyński) - Remove layerscape-gen4 dependencies on OF and ARM64, add dependency on ARCH_LAYERSCAPE (Geert Uytterhoeven) HiSilicon HIP PCIe controller driver: - Remove obsolete HiSilicon PCIe DT description (Dongdong Liu) Intel Gateway PCIe controller driver: - Remove unused pcie_app_rd() (Jiapeng Chong) Intel VMD host bridge driver: - Program IRTE with Requester ID of VMD endpoint, not child device (Jon Derrick) - Disable VMD MSI-X remapping when possible so children can use more MSI-X vectors (Jon Derrick) MediaTek PCIe controller driver: - Configure FC and FTS for functions other than 0 (Ryder Lee) - Add YAML schema for MediaTek (Jianjun Wang) - Export pci_pio_to_address() for module use (Jianjun Wang) - Add MediaTek MT8192 PCIe controller driver (Jianjun Wang) - Add MediaTek MT8192 INTx support (Jianjun Wang) - Add MediaTek MT8192 MSI support (Jianjun Wang) - Add MediaTek MT8192 system power management support (Jianjun Wang) - Add missing MODULE_DEVICE_TABLE (Qiheng Lin) Microchip PolarFlare PCIe controller driver: - Make several symbols static (Wei Yongjun) NVIDIA Tegra PCIe controller driver: - Add MCFG quirks for Tegra194 ECAM errata (Vidya Sagar) - Make several symbols const (Rikard Falkeborn) - Fix Kconfig host/endpoint typo (Wesley Sheng) SiFive FU740 PCIe controller driver: - Add pcie_aux clock to prci driver (Greentime Hu) - Use reset-simple in prci driver for PCIe (Greentime Hu) - Add SiFive FU740 PCIe host controller driver and DT binding (Paul Walmsley, Greentime Hu) Synopsys DesignWare PCIe controller driver: - Move MSI Receiver init to dw_pcie_host_init() so it is re-initialized along with the RC in resume (Jisheng Zhang) - Move iATU detection earlier to fix regression (Hou Zhiqiang) TI J721E PCIe driver: - Add DT binding and TI j721e support for refclk to PCIe connector (Kishon Vijay Abraham I) - Add host mode and endpoint mode DT bindings for TI AM64 SoC (Kishon Vijay Abraham I) TI Keystone PCIe controller driver: - Use generic config accessors for TI AM65x (K3) to fix regression (Kishon Vijay Abraham I) Xilinx NWL PCIe controller driver: - Add support for coherent PCIe DMA traffic using CCI (Bharat Kumar Gogada) - Add optional "dma-coherent" DT property (Bharat Kumar Gogada) Miscellaneous: - Fix kernel-doc warnings (Krzysztof Wilczyński) - Remove unused MicroGate SyncLink device IDs (Jiri Slaby) - Remove redundant dev_err() for devm_ioremap_resource() failure (Chen Hui) - Remove redundant initialization (Colin Ian King) - Drop redundant dev_err() for platform_get_irq() errors (Krzysztof Wilczyński)" * tag 'pci-v5.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (98 commits) riscv: dts: Add PCIe support for the SiFive FU740-C000 SoC PCI: fu740: Add SiFive FU740 PCIe host controller driver dt-bindings: PCI: Add SiFive FU740 PCIe host controller MAINTAINERS: Add maintainers for SiFive FU740 PCIe driver clk: sifive: Use reset-simple in prci driver for PCIe driver clk: sifive: Add pcie_aux clock in prci driver for PCIe driver PCI: brcmstb: Use reset/rearm instead of deassert/assert ata: ahci_brcm: Fix use of BCM7216 reset controller reset: add missing empty function reset_control_rearm() PCI: Allow VPD access for QLogic ISP2722 PCI/VPD: Add helper pci_get_func0_dev() PCI/VPD: Remove pci_vpd_find_tag() SRDT handling PCI/VPD: Remove pci_vpd_find_tag() 'offset' argument PCI/VPD: Change pci_vpd_init() return type to void PCI/VPD: Make missing VPD message less alarming PCI/VPD: Remove pci_set_vpd_size() x86/PCI: Remove unused alloc_pci_root_info() return value MAINTAINERS: Add Jianjun Wang as MediaTek PCI co-maintainer PCI: mediatek-gen3: Add system PM support PCI: mediatek-gen3: Add MSI support ...
2021-05-04clk: sifive: Use reset-simple in prci driver for PCIe driverGreentime Hu
We use reset-simple in this patch so that pcie driver can use devm_reset_control_get() to get this reset data structure and use reset_control_deassert() to deassert pcie_power_up_rst_n. Link: https://lore.kernel.org/r/20210504105940.100004-3-greentime.hu@sifive.com Signed-off-by: Greentime Hu <greentime.hu@sifive.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Stephen Boyd <sboyd@kernel.org>
2021-03-23reset: socfpga: use ARCH_INTEL_SOCFPGA also for 32-bit ARM SoCsKrzysztof Kozlowski
ARCH_SOCFPGA is being renamed to ARCH_INTEL_SOCFPGA so adjust the 32-bit ARM drivers to rely on new symbol. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2021-03-23arm64: socfpga: merge Agilex and N5X into ARCH_INTEL_SOCFPGAKrzysztof Kozlowski
Agilex, N5X and Stratix 10 share all quite similar arm64 hard cores and SoC-part. Up to a point that N5X uses the same DTSI as Agilex. From the Linux kernel point of view these are flavors of the same architecture so there is no need for three top-level arm64 architectures. Simplify this by merging all three architectures into ARCH_INTEL_SOCFPGA and dropping the other ARCH* arm64 Kconfig entries. The side effect is that the INTEL_STRATIX10_SERVICE will now be available for both 32-bit and 64-bit Intel SoCFPGA, even though it is used only for 64-bit. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2021-02-26Merge tag 'riscv-for-linus-5.12-mw0' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: "A handful of new RISC-V related patches for this merge window: - A check to ensure drivers are properly using uaccess. This isn't manifesting with any of the drivers I'm currently using, but may catch errors in new drivers. - Some preliminary support for the FU740, along with the HiFive Unleashed it will appear on. - NUMA support for RISC-V, which involves making the arm64 code generic. - Support for kasan on the vmalloc region. - A handful of new drivers for the Kendryte K210, along with the DT plumbing required to boot on a handful of K210-based boards. - Support for allocating ASIDs. - Preliminary support for kernels larger than 128MiB. - Various other improvements to our KASAN support, including the utilization of huge pages when allocating the KASAN regions. We may have already found a bug with the KASAN_VMALLOC code, but it's passing my tests. There's a fix in the works, but that will probably miss the merge window. * tag 'riscv-for-linus-5.12-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (75 commits) riscv: Improve kasan population by using hugepages when possible riscv: Improve kasan population function riscv: Use KASAN_SHADOW_INIT define for kasan memory initialization riscv: Improve kasan definitions riscv: Get rid of MAX_EARLY_MAPPING_SIZE soc: canaan: Sort the Makefile alphabetically riscv: Disable KSAN_SANITIZE for vDSO riscv: Remove unnecessary declaration riscv: Add Canaan Kendryte K210 SD card defconfig riscv: Update Canaan Kendryte K210 defconfig riscv: Add Kendryte KD233 board device tree riscv: Add SiPeed MAIXDUINO board device tree riscv: Add SiPeed MAIX GO board device tree riscv: Add SiPeed MAIX DOCK board device tree riscv: Add SiPeed MAIX BiT board device tree riscv: Update Canaan Kendryte K210 device tree dt-bindings: add resets property to dw-apb-timer dt-bindings: fix sifive gpio properties dt-bindings: update sifive uart compatible string dt-bindings: update sifive clint compatible string ...
2021-02-20Merge tag 'arm-drivers-v5.12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "Updates for SoC specific drivers include a few subsystems that have their own maintainers but send them through the soc tree: SCMI firmware: - add support for a completion interrupt Reset controllers: - new driver for BCM4908 - new devm_reset_control_get_optional_exclusive_released() function Memory controllers: - Renesas RZ/G2 support - Tegra124 interconnect support - Allow more drivers to be loadable modules TEE/optee firmware: - minor code cleanup The other half of this is SoC specific drivers that do not belong into any other subsystem, most of them living in drivers/soc: - Allwinner/sunxi power management work - Allwinner H616 support - ASpeed AST2600 system identification support - AT91 SAMA7G5 SoC ID driver - AT91 SoC driver cleanups - Broadcom BCM4908 power management bus support - Marvell mbus cleanups - Mediatek MT8167 power domain support - Qualcomm socinfo driver support for PMIC - Qualcomm SoC identification for many more products - TI Keystone driver cleanups for PRUSS and elsewhere" * tag 'arm-drivers-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (89 commits) soc: aspeed: socinfo: Add new systems soc: aspeed: snoop: Add clock control logic memory: tegra186-emc: Replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE memory: samsung: exynos5422-dmc: Correct function names in kerneldoc memory: ti-emif-pm: Drop of_match_ptr from of_device_id table optee: simplify i2c access drivers: soc: atmel: fix type for same7 tee: optee: remove need_resched() before cond_resched() soc: qcom: ocmem: don't return NULL in of_get_ocmem optee: sync OP-TEE headers tee: optee: fix 'physical' typos drivers: optee: use flexible-array member instead of zero-length array tee: fix some comment typos in header files soc: ti: k3-ringacc: Use of_device_get_match_data() soc: ti: pruss: Refactor the CFG sub-module init soc: mediatek: pm-domains: Don't print an error if child domain is deferred soc: mediatek: pm-domains: Add domain regulator supply dt-bindings: power: Add domain regulator supply soc: mediatek: cmdq: Remove cmdq_pkt_flush() soc: mediatek: pm-domains: Add support for mt8167 ...
2021-01-20ARM: remove zte zx platformArnd Bergmann
The ZTE ZX set-top-box SoC platform was added in 2015 by Jun Nie, with Baoyou Xie and Shawn Guo subsequently becoming maintainers after the addition of the 64-bit variant. However, the only machines that were ever supported upstream are the reference designs, not actual set-top-box devices that would benefit from this support. All ZTE set-top-boxes from the past few years seem to be based on third-party SoCs. While there is very little information about zx296702 and zx296718 on the web, I found some references to other chips from the same family, such as zx296716 and zx296719, which were never submitted for upstream support. Finally, there is no support for the GPU on either of them, with the lima and panfrost device drivers having been added after work on the zx platform had stopped. Shawn confirmed that he has not seen any interest in this platform for the past four years, and that it can be removed. Thanks to Jun and Shawn for maintaining this platform over the past five years. Cc: Jun Nie <jun.nie@linaro.org> Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-01-14riscv: Add Canaan Kendryte K210 reset controllerDamien Le Moal
Add a reset controller driver for the Canaan Kendryte K210 SoC. This driver relies on its syscon compatible parent node (sysctl) for its register mapping. Default this driver compilation to y when the SOC_CANAAN option is selected. The MAINTAINERS file is updated, adding the entry "CANAAN/KENDRYTE K210 SOC RESET CONTROLLER DRIVER" with myself listed as maintainer for this driver. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-01-08reset: simple: add BCM4908 MISC PCIe reset controller supportRafał Miłecki
It's a trivial reset controller. One register with bit per PCIe core. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-12-16Merge tag 'arm-soc-drivers-5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "There are a couple of subsystems maintained by other people that merge their drivers through the SoC tree, those changes include: - The SCMI firmware framework gains support for sensor notifications and for controlling voltage domains. - A large update for the Tegra memory controller driver, integrating it better with the interconnect framework - The memory controller subsystem gains support for Mediatek MT8192 - The reset controller framework gains support for sharing pulsed resets For Soc specific drivers in drivers/soc, the main changes are - The Allwinner/sunxi MBUS gets a rework for the way it handles dma_map_ops and offsets between physical and dma address spaces. - An errata fix plus some cleanups for Freescale Layerscape SoCs - A cleanup for renesas drivers regarding MMIO accesses. - New SoC specific drivers for Mediatek MT8192 and MT8183 power domains - New SoC specific drivers for Aspeed AST2600 LPC bus control and SoC identification. - Core Power Domain support for Qualcomm MSM8916, MSM8939, SDM660 and SDX55. - A rework of the TI AM33xx 'genpd' power domain support to use information from DT instead of platform data - Support for TI AM64x SoCs - Allow building some Amlogic drivers as modules instead of built-in Finally, there are numerous cleanups and smaller bug fixes for Mediatek, Tegra, Samsung, Qualcomm, TI OMAP, Amlogic, Rockchips, Renesas, and Xilinx SoCs" * tag 'arm-soc-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (222 commits) soc: mediatek: mmsys: Specify HAS_IOMEM dependency for MTK_MMSYS firmware: xilinx: Properly align function parameter firmware: xilinx: Add a blank line after function declaration firmware: xilinx: Remove additional newline firmware: xilinx: Fix kernel-doc warnings firmware: xlnx-zynqmp: fix compilation warning soc: xilinx: vcu: add missing register NUM_CORE soc: xilinx: vcu: use vcu-settings syscon registers dt-bindings: soc: xlnx: extract xlnx, vcu-settings to separate binding soc: xilinx: vcu: drop useless success message clk: samsung: mark PM functions as __maybe_unused soc: samsung: exynos-chipid: initialize later - with arch_initcall soc: samsung: exynos-chipid: order list of SoCs by name memory: jz4780_nemc: Fix potential NULL dereference in jz4780_nemc_probe() memory: ti-emif-sram: only build for ARMv7 memory: tegra30: Support interconnect framework memory: tegra20: Support hardware versioning and clean up OPP table initialization dt-bindings: memory: tegra20-emc: Document opp-supported-hw property soc: rockchip: io-domain: Fix error return code in rockchip_iodomain_probe() reset-controller: ti: force the write operation when assert or deassert ...
2020-11-17reset: add BCM6345 reset controller driverÁlvaro Fernández Rojas
Add support for resetting blocks through the Linux reset controller subsystem for BCM63xx SoCs. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Florian Fainelli <F.fainelli@gmail.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-11-16reset: meson: make it possible to build as a moduleNeil Armstrong
In order to reduce the kernel Image size on multi-platform distributions, make it possible to build the reset controller driver as a module. This partially reverts commit 8290924e6878 ("reset: meson: make it explicitly non-modular"). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-10-24Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms. A bulk of this is smaller fixes or cleanups, but some of the new material this time around is: - Support for Nvidia Tegra234 SoC - Ring accelerator support for TI AM65x - PRUSS driver for TI platforms - Renesas support for R-Car V3U SoC - Reset support for Cortex-M4 processor on i.MX8MQ There are also new socinfo entries for a handful of different SoCs and platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (131 commits) drm/mediatek: reduce clear event soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api soc: mediatek: cmdq: add jump function soc: mediatek: cmdq: add write_s_mask value function soc: mediatek: cmdq: add write_s value function soc: mediatek: cmdq: add read_s function soc: mediatek: cmdq: add write_s_mask function soc: mediatek: cmdq: add write_s function soc: mediatek: cmdq: add address shift in jump soc: mediatek: mtk-infracfg: Fix kerneldoc soc: amlogic: pm-domains: use always-on flag reset: sti: reset-syscfg: fix struct description warnings reset: imx7: add the cm4 reset for i.MX8MQ dt-bindings: reset: imx8mq: add m4 reset reset: Fix and extend kerneldoc reset: reset-zynqmp: Added support for Versal platform dt-bindings: reset: Updated binding for Versal reset driver reset: imx7: Support module build soc: fsl: qe: Remove unnessesary check in ucc_set_tdm_rxtx_clk soc: fsl: qman: convert to use be32_add_cpu() ...
2020-09-23reset: imx7: Support module buildAnson Huang
Use module_platform_driver(), add module device table, author, description and license to support module build, and CONFIG_RESET_IMX7 is changed to default 'y' ONLY for i.MX7D, other platforms need to select it in defconfig. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-08-18reset: Add Raspberry Pi 4 firmware reset controllerNicolas Saenz Julienne
Raspberry Pi 4's co-processor controls some of the board's HW initialization process, but it's up to Linux to trigger it when relevant. Introduce a reset controller capable of interfacing with RPi4's co-processor that models these firmware initialization routines as reset lines. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Link: https://lore.kernel.org/r/20200629161845.6021-3-nsaenzjulienne@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-10reset: intel: add unspecified HAS_IOMEM dependencyBrendan Higgins
Currently CONFIG_RESET_INTEL_GW=y implicitly depends on CONFIG_HAS_IOMEM=y; consequently, on architectures without IOMEM we get the following build error: /usr/bin/ld: drivers/reset/reset-intel-gw.o: in function `intel_reset_probe': drivers/reset/reset-intel-gw.c:185: undefined reference to `devm_platform_ioremap_resource' Fix the build error by adding the unspecified dependency. Signed-off-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-02-10reset: brcmstb-rescal: add unspecified HAS_IOMEM dependencyBrendan Higgins
Currently CONFIG_RESET_BRCMSTB_RESCAL=y implicitly depends on CONFIG_HAS_IOMEM=y; consequently, on architectures without IOMEM we get the following build error: /usr/bin/ld: drivers/reset/reset-brcmstb-rescal.o: in function `brcm_rescal_reset_probe': drivers/reset/reset-brcmstb-rescal.c:76: undefined reference to `devm_ioremap_resource' Fix the build error by adding the unspecified dependency. Signed-off-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-01-08reset: qcom-aoss: Allow CONFIG_RESET_QCOM_AOSS to be a tristateJohn Stultz
Allow CONFIG_RESET_QCOM_AOSS to be set as as =m to allow for the driver to be loaded from a modules. Also replaces the builtin_platform_driver() line with module_platform_driver() and adds a MODULE_DEVICE_TABLE() entry. Cc: Todd Kjos <tkjos@google.com> Cc: Alistair Delva <adelva@google.com> Cc: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-01-06reset: Add Broadcom STB RESCAL reset controllerJim Quinlan
On BCM7216 there is a special purpose reset controller named RESCAL (reset calibration) which is necessary for SATA and PCIe0/1 to operate correctly. This commit adds support for such a reset controller to be available. Signed-off-by: Jim Quinlan <jim2101024@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-01-03reset: intel: Add system reset controller driverDilip Kota
Add driver for the reset controller present on Intel Gateway SoCs for performing reset management of the devices present on the SoC. Driver also registers a reset handler to peform the entire device reset. Signed-off-by: Dilip Kota <eswara.kota@linux.intel.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-01-02reset: npcm: add NPCM reset controller driverTomer Maimon
Add Nuvoton NPCM BMC reset controller driver. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-10-24reset: simple: Add Realtek RTD1195/RTD1295Andreas Färber
Enable RESET_SIMPLE for ARCH_REALTEK. They can reuse the DesignWare bindings to avoid a new compatible. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-10-24reset: simple: Keep alphabetical orderAndreas Färber
Restore alphabetical order for Kconfig dependencies and help text. Compatibles got out of order too, but no functional change done here. Goal is to make it obvious where to add new platforms. Fixes: 64c47b624f64 ("reset: Add reset controller support for BM1880 SoC") Fixes: 1d7592f84f92 ("reset: simple: Enable for ASPEED systems") Fixes: 96a2f50305d1 ("reset: build simple reset controller driver for Agilex") Cc: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-10-22reset: build simple reset controller driver for AgilexDinh Nguyen
The Intel SoCFPGA Agilex platform shares the same reset controller that is on the Stratix10. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-08-14Merge tag 'scmi-updates-5.4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/drivers ARM SCMI updates/fixes for v5.4 Handful of fixes/updates including: 1. SCMI v2.0(recently released) support for: - Performance protocol fast channels - Reset Management Protocol 2. SCMI infrastructure/core support for recieve(Rx) channels, asynchronous commands and delayed response 3. Usage of asynchronous commands for clock rate setting and sensor reading based on the attributes read from the firmware 4. Miscellaneous cleanups(typos, naming alignment with specification, and SPDX License identifier) 5. Couple of fixes: removal of extra check for invalid length and additional check to ensure platform/firmware has released shared memory before using it in OSPM * tag 'scmi-updates-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: (22 commits) reset: Add support for resets provided by SCMI firmware: arm_scmi: Add RESET protocol in SCMI v2.0 dt-bindings: arm: Extend SCMI to support new reset protocol firmware: arm_scmi: Make use SCMI v2.0 fastchannel for performance protocol firmware: arm_scmi: Add discovery of SCMI v2.0 performance fastchannels firmware: arm_scmi: Use {get,put}_unaligned_le{32,64} accessors firmware: arm_scmi: Use asynchronous CLOCK_RATE_SET when possible firmware: arm_scmi: Drop config flag in clk_ops->rate_set firmware: arm_scmi: Add asynchronous sensor read if it supports firmware: arm_scmi: Drop async flag in sensor_ops->reading_get firmware: arm_scmi: Add support for asynchronous commands and delayed response firmware: arm_scmi: Add mechanism to unpack message headers firmware: arm_scmi: Separate out tx buffer handling and prepare to add rx firmware: arm_scmi: Add receive channel support for notifications firmware: arm_scmi: Segregate tx channel handling and prepare to add rx firmware: arm_scmi: Reorder some functions to avoid forward declarations firmware: arm_scmi: Check if platform has released shmem before using firmware: arm_scmi: Use the term 'message' instead of 'command' firmware: arm_scmi: Fix few trivial typos in comments firmware: arm_scmi: Remove extra check for invalid length message responses ... Link: https://lore.kernel.org/r/20190814172454.26191-1-sudeep.holla@arm.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-12reset: Add support for resets provided by SCMISudeep Holla
On some ARM based systems, a separate Cortex-M based System Control Processor(SCP) provides the overall power, clock, reset and system control. System Control and Management Interface(SCMI) Message Protocol is defined for the communication between the Application Cores(AP) and the SCP. Adds support for the resets provided using SCMI protocol for performing reset management of various devices present on the SoC. Various reset functionalities are achieved by the means of different ARM SCMI device operations provided by the ARM SCMI framework. Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2019-08-06reset: Add DesignWare IP support to simple resetGustavo Pimentel
The reset-simple driver can be now used on DesignWare IPs by default by selecting the following compatible strings: - snps,dw-high-reset for active high resets inputs - snps,dw-low-reset for active low resets inputs Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Signed-off-by: Luis Oliveira <luis.oliveira@synopsys.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-07-04Merge tag 'reset-for-v5.3' of git://git.pengutronix.de/git/pza/linux into ↵Olof Johansson
arm/drivers Reset controller changes for v5.3 This tag adds support for the Bitmain BM1880 reset controller to the reset-simple driver and fixes a spelling mistake in the i.MX7 reset controller binding document. * tag 'reset-for-v5.3' of git://git.pengutronix.de/git/pza/linux: dt-bindings: reset: imx7: Fix the spelling of 'indices' reset: Add reset controller support for BM1880 SoC dt-bindings: reset: Add devicetree binding for BM1880 reset controller Link: https://lore.kernel.org/r/1562236632.6641.14.camel@pengutronix.de Signed-off-by: Olof Johansson <olof@lixom.net>
2019-05-24reset: Add reset controller support for BM1880 SoCManivannan Sadhasivam
Add reset controller support for Bitmain BM1880 SoC reusing the reset-simple driver. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-28reset: imx7: Add support for i.MX8MQ IP block variantAndrey Smirnov
Add bits and pieces needed to support IP block variant found on i.MX8MQ SoCs. Cc: p.zabel@pengutronix.de Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: cphealy@gmail.com Cc: l.stach@pengutronix.de Cc: Leonard Crestez <leonard.crestez@nxp.com> Cc: "A.s. Dong" <aisheng.dong@nxp.com> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org Cc: linux-imx@nxp.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> [p.zabel@pengutronix.de: fixed whitespace alignment] Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-01-28reset: Add Broadcom STB SW_INIT reset controller driverFlorian Fainelli
Add support for resetting blocks through the Linux reset controller subsystem when reset lines are provided through a SW_INIT-style reset controller on Broadcom STB SoCs. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-01-07reset: uniphier-usb3: Rename to reset-uniphier-glueKunihiko Hayashi
This driver works for controlling the reset lines including USB3 glue layer, however, this can be applied to other glue layers. Now this patch renames the driver from "reset-uniphier-usb3" to "reset-uniphier-glue". At the same time, this changes CONFIG_RESET_UNIPHIER_USB3 to CONFIG_RESET_UNIPHIER_GLUE. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-01-07reset: socfpga: add an early reset driver for SoCFPGADinh Nguyen
Create a separate reset driver that uses the reset operations in reset-simple. The reset driver for the SoCFPGA platform needs to register early in order to be able bring online timers that needed early in the kernel bootup. We do not need this early reset driver for Stratix10, because on arm64, Linux does not need the timers are that in reset. Linux is able to run just fine with the internal armv8 timer. Thus, we use a new binding "altr,stratix10-rst-mgr" for the Stratix10 platform. The Stratix10 platform will continue to use the reset-simple platform driver, while the 32-bit platforms(Cyclone5/Arria5/Arria10) will use the early reset driver. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> [p.zabel@pengutronix.de: fixed socfpga of_device_id in reset-simple] Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-10-05reset: qcom: PDC Global (Power Domain Controller) reset controllerSibi Sankar
Add reset controller for SDM845 SoCs to control reset signals provided by PDC Global for Modem, Compute, Display, GPU, Debug, AOP, Sensors, Audio, SP and APPS Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-07-20reset: meson: add meson audio arb driverJerome Brunet
The Amlogic Audio ARB is a simple device which enables or disables the access of Audio FIFOs to DDR on AXG based SoC. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-07-16reset: uniphier: add USB3 core reset controlKunihiko Hayashi
Add a reset line to enable USB3 core implemented in UniPhier SoCs. This reuses only the reset operations in reset-simple, because the reset-simple doesn't handle any SoC-dependent clocks and resets. This reset line is included in the USB3 glue layer, and it's necessary to enable clocks and deassert resets of the layer before using this reset line. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-07-16reset: qcom: AOSS (always on subsystem) reset controllerSibi Sankar
Add reset controller driver for Qualcomm SDM845 SoC to control reset signals provided by AOSS for Modem, Venus ADSP, GPU, Camera, Wireless, Display subsystem Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-03-27reset: stm32mp1: Enable stm32mp1 reset driverGabriel Fernandez
stm32mp1 RCC IP 1 has a reset SET register and a reset CLEAR register. Writing '0' on reset SET register has no effect Writing '1' on reset SET register activates the reset of the corresponding peripheral Writing '0' on reset CLEAR register has no effect Writing '1' on reset CLEAR register releases the reset of the corresponding peripheral See Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.txt Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-03-27reset: imx7: add 'depends on HAS_IOMEM' to fix unmet dependencyMasahiro Yamada
This config select's MFD_SYSCON, but does not depend on HAS_IOMEM. Compile testing on architecture without HAS_IOMEM causes "unmet direct dependencies" in Kconfig phase. Detected by "make ARCH=score allyesconfig". Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-02-20reset: simple: Enable for ASPEED systemsJoel Stanley
ASPEED BMC SoCs have a reset controller in the LPC IP that can be controlled using this driver to release the UARTs from reset. No special configuration is required, so only the compatible string is added. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-10-18Merge branch 'reset/arc' into reset/nextPhilipp Zabel
Merge the AXS10x driver, which is also merged into git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc.git for-next
2017-10-18reset: zx2967: use the reset-simple driverPhilipp Zabel
The reset-simple driver can be used without changes. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Alexandru Gagniuc <alex.g@adaptrum.com>
2017-10-18reset: stm32: use the reset-simple driverPhilipp Zabel
The reset-simple driver can be used without changes. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Gabriel Fernandez <gabriel.fernandez@st.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 23:58:09 +0000