| Age | Commit message (Collapse) | Author |
|---|
|
The remoteproc core uses a static ida named rproc_dev_index for
assigning an automatic index number to a registered remoteproc.
The ida core may allocate some internal idr cache layers and ida
bitmap upon any ida allocation, and all these layers are truely
freed only upon the ida destruction. The rproc_dev_index ida is
not destroyed at present, leading to a memory leak when using the
remoteproc core as a module and atleast one rproc device is
registered and unregistered.
Fix this by invoking ida_destroy() in the remoteproc core module
exit.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
Recent gcc versions warn about reading from a negative offset of
an on-stack array:
drivers/remoteproc/remoteproc_debugfs.c: In function 'rproc_recovery_write':
drivers/remoteproc/remoteproc_debugfs.c:167:9: warning: 'buf[4294967295u]' may be used uninitialized in this function [-Wmaybe-uninitialized]
I don't see anything in sys_write() that prevents us from
being called with a zero 'count' argument, so we should
add an extra check in rproc_recovery_write() to prevent the
access and avoid the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 2e37abb89a2e ("remoteproc: create a 'recovery' debugfs entry")
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
Fix this:
drivers/remoteproc/remoteproc_core.c: In function 'rproc_get_by_phandle':
>> drivers/remoteproc/remoteproc_core.c:1167:2: error: implicit declaration of function 'of_find_node_by_phandle' [-Werror=implicit-function-declaration]
np = of_find_node_by_phandle(phandle);
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Dave Gerlach <d-gerlach@ti.com>
Cc: Suman Anna <s-anna@ti.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
Add a remoteproc driver to load the firmware and boot a small
Wakeup M3 processor present on TI AM33xx and AM43xx SoCs. This
Wakeup M3 remote processor is an integrated Cortex M3 that allows
the SoC to enter the lowest possible power state by taking control
from the MPU after it has gone into its own low power state and
shutting off any additional peripherals.
The Wakeup M3 processor has two internal memory regions - 16 kB of
unified instruction memory called UMEM used to store executable
code, and 8 kB of data memory called DMEM used for all data sections.
The Wakeup M3 processor executes its code entirely from within the
UMEM and uses the DMEM for any data. It does not use any external
memory or any other external resources. The device address view has
the UMEM at address 0x0 and DMEM at address 0x80000, and these are
computed automatically within the driver based on relative address
calculation from the corresponding device tree IOMEM resources.
These device addresses are used to aid the core remoteproc ELF
loader code to properly translate and load the firmware segments
through the .rproc_da_to_va ops.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
The rproc_da_to_va API is currently used to perform any device to
kernel address translations to meet the different needs of the remoteproc
core/drivers (eg: loading). The functionality is achieved within the
remoteproc core, and is limited only for carveouts allocated within the
core.
A new rproc ops, da_to_va, is added to provide flexibility to platform
implementations to perform the address translation themselves when the
above conditions cannot be met by the implementations. The rproc_da_to_va()
API is extended to invoke this ops if present, and fallback to regular
processing if the platform implementation cannot provide the translation.
This will allow any remoteproc implementations to translate addresses for
dedicated memories like internal memories.
While at this, also update the rproc_da_to_va() documentation since it
is an exported function.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
Allow users of remoteproc the ability to get a handle to an rproc by
passing a phandle supplied in the user's device tree node. This is
useful in situations that require manual booting of the rproc.
This patch uses the code removed by commit 40e575b1d0b3 ("remoteproc:
remove the get_by_name/put API") for the ref counting but is modified
to use a simple list and locking mechanism and has rproc_get_by_name
replaced with an rproc_get_by_phandle API.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
[fix order of Signed-off-by tags]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
Fix all the checkpatch warnings in the core remoteproc
code. The fixes cover the following warnings:
1. WARNING: void function return statements are not generally useful
2. WARNING: Possible unnecessary 'out of memory' message
3. WARNING: line over 80 characters
4. WARNING: braces {} are not necessary for single statement blocks
5. WARNING: Unnecessary space before function pointer arguments
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
Fix the following checkpatch warning,
WARNING: quoted string split across lines
+ "\n\t\tName of DSP firmware file in /lib/firmware"
+ " (if not specified defaults to 'rproc-dsp-fw')");
Signed-off-by: Suman Anna <s-anna@ti.com>
[remove leading whitespace as well]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
Fix couple of checkpatch warnings of the type,
"WARNING: Missing a blank line after declarations"
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
The remoteproc framework currently relies on iommu_present() on
the bus the device is on, to perform MMU management. However, this
logic doesn't scale for multi-arch, especially for processors that
do not have an IOMMU. Replace this logic instead by using a h/w
capability flag for the presence of IOMMU in the rproc structure.
This issue is seen on OMAP platforms when trying to add a remoteproc
driver for a small Cortex M3 called the WkupM3 used for suspend /
resume management on TI AM335/AM437x SoCs. This processor does not
have an MMU. Same is the case with another processor subsystem
PRU-ICSS on AM335/AM437x. All these are platform devices, and the
current iommu_present check will not scale for the same kernel image
to support OMAP4/OMAP5 and AM335/AM437x.
The existing platform implementation drivers - OMAP remoteproc, STE
Modem remoteproc and DA8xx remoteproc, are updated as well to properly
configure the newly added rproc field.
Cc: Robert Tivy <rtivy@ti.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Suman Anna <s-anna@ti.com>
[small change in the commit title and in a single comment]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core update from Greg KH:
"Here's the set of driver core patches for 3.19-rc1.
They are dominated by the removal of the .owner field in platform
drivers. They touch a lot of files, but they are "simple" changes,
just removing a line in a structure.
Other than that, a few minor driver core and debugfs changes. There
are some ath9k patches coming in through this tree that have been
acked by the wireless maintainers as they relied on the debugfs
changes.
Everything has been in linux-next for a while"
* tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits)
Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries"
fs: debugfs: add forward declaration for struct device type
firmware class: Deletion of an unnecessary check before the function call "vunmap"
firmware loader: fix hung task warning dump
devcoredump: provide a one-way disable function
device: Add dev_<level>_once variants
ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries
ath: use seq_file api for ath9k debugfs files
debugfs: add helper function to create device related seq_file
drivers/base: cacheinfo: remove noisy error boot message
Revert "core: platform: add warning if driver has no owner"
drivers: base: support cpu cache information interface to userspace via sysfs
drivers: base: add cpu_device_create to support per-cpu devices
topology: replace custom attribute macros with standard DEVICE_ATTR*
cpumask: factor out show_cpumap into separate helper function
driver core: Fix unbalanced device reference in drivers_probe
driver core: fix race with userland in device_add()
sysfs/kernfs: make read requests on pre-alloc files use the buffer.
sysfs/kernfs: allow attributes to request write buffer be pre-allocated.
fs: sysfs: return EGBIG on write if offset is larger than file size
...
|
|
Pull virtio updates from Michael Tsirkin:
"virtio: virtio 1.0 support, misc patches
This adds a lot of infrastructure for virtio 1.0 support. Notable
missing pieces: virtio pci, virtio balloon (needs spec extension),
vhost scsi.
Plus, there are some minor fixes in a couple of places.
Note: some net drivers are affected by these patches. David said he's
fine with merging these patches through my tree.
Rusty's on vacation, he acked using my tree for these, too"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (70 commits)
virtio_ccw: finalize_features error handling
virtio_ccw: future-proof finalize_features
virtio_pci: rename virtio_pci -> virtio_pci_common
virtio_pci: update file descriptions and copyright
virtio_pci: split out legacy device support
virtio_pci: setup config vector indirectly
virtio_pci: setup vqs indirectly
virtio_pci: delete vqs indirectly
virtio_pci: use priv for vq notification
virtio_pci: free up vq->priv
virtio_pci: fix coding style for structs
virtio_pci: add isr field
virtio: drop legacy_only driver flag
virtio_balloon: drop legacy_only driver flag
virtio_ccw: rev 1 devices set VIRTIO_F_VERSION_1
virtio: allow finalize_features to fail
virtio_ccw: legacy: don't negotiate rev 1/features
virtio: add API to detect legacy devices
virtio_console: fix sparse warnings
vhost: remove unnecessary forward declarations in vhost.h
...
|
|
This will make it easy for transports to validate features and return
failure.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
At this point, no transports set any of the high 32 feature bits.
Since transports generally can't (yet) cope with such bits, add BUG_ON
checks to make sure they are not set by mistake.
Based on rproc patch by Rusty.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
|
|
Change u32 to u64, and use BIT_ULL and 1ULL everywhere.
Note: transports are unchanged, and only set low 32 bit.
This guarantees that no transport sets e.g. VERSION_1
by mistake without proper support.
Based on patch by Rusty.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
|
|
It seemed like a good idea to use bitmap for features
in struct virtio_device, but it's actually a pain,
and seems to become even more painful when we get more
than 32 feature bits. Just change it to a u32 for now.
Based on patch by Rusty.
Suggested-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
|
|
The OMAP mailbox driver and its existing clients (remoteproc
for OMAP4+) are adapted to use the generic mailbox framework.
The main changes for the adaptation are:
- The tasklet used for Tx is replaced with the state machine from
the generic mailbox framework. The workqueue used for processing
the received messages stays intact for minimizing the effects on
the OMAP mailbox clients.
- The existing exported client API, omap_mbox_get, omap_mbox_put and
omap_mbox_send_msg are deleted, as the framework provides equivalent
functionality. A OMAP-specific omap_mbox_request_channel is added
though to support non-DT way of requesting mailboxes.
- The OMAP mailbox driver is integrated with the mailbox framework
through the proper implementations of mbox_chan_ops, except for
.last_tx_done and .peek_data. The OMAP mailbox driver does not need
these ops, as it is completely interrupt driven.
- The OMAP mailbox driver uses a custom of_xlate controller ops that
allows phandles for the pargs specifier instead of indexing to avoid
any channel registration order dependencies.
- The new framework does not support multiple clients operating on a
single channel, so the reference counting logic is simplified.
- The remoteproc driver (current client) is adapted to use the new API.
The notifier callbacks used within this client is replaced with the
regular callbacks from the newer framework.
- The exported OMAP mailbox API are limited to omap_mbox_save_ctx,
omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq,
with the signature modified to take in the new mbox_chan handle instead
of the OMAP specific omap_mbox handle. The first 2 will be removed when
the OMAP mailbox driver is adapted to runtime_pm. The other exported
API omap_mbox_request_channel will be removed once existing legacy
users are converted to DT.
Signed-off-by: Suman Anna <s-anna@ti.com>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
A platform_driver does not need to set an owner, it will be populated by the
driver core.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
We can only use CMA on systems that have an MMU, because of
the requirement to use memory migration. NOMMU systems are
rather constrained to start with, but it seems reasonable
to assume that DMA allocations can still succeed in the
constrained case for remoteproc on NOMMU, so this patch
changes the da8xx implementation to not rely on CMA when
the MMU is disabled.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Robert Tivy <rtivy@ti.com>
|
|
These local symbols are used only in this file.
Fix the following sparse warnings:
drivers/remoteproc/ste_modem_rproc.c:167:27: warning: symbol 'sproc_fw_ops' was not declared. Should it be static?
drivers/remoteproc/ste_modem_rproc.c:196:25: warning: symbol 'sproc_dev_cb' was not declared. Should it be static?
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
[standartize patch title]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
Remove unneeded error handling on the result of a call to
platform_get_resource when the value is passed to devm_ioremap_resource.
Move the call to platform_get_resource adjacent to the call to
devm_ioremap_resource to make the connection between them more clear.
A simplified version of the semantic patch that makes this change is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@@
expression pdev,res,n,e,e1;
expression ret != 0;
identifier l;
@@
- res = platform_get_resource(pdev, IORESOURCE_MEM, n);
... when != res
- if (res == NULL) { ... \(goto l;\|return ret;\) }
... when != res
+ res = platform_get_resource(pdev, IORESOURCE_MEM, n);
e = devm_ioremap_resource(e1, res);
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
[simplify patch title]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
The comment above disable_irq says that it is needed to ensure that the
"devm subsystem might end up releasing things before freeing the irq,
thus allowing an interrupt to sneak in while the device is being
removed." disable_irq is enough for this purpose and there is no need to
manually free the reference to the clock.
Cc: Robert Tivy <rtivy@ti.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
[moved the Cc line into the commit message]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
Currently a host kick error is silently ignored and not reflected in
the virtqueue of a particular virtio device.
Changing the notify API for guest->host notification seems to be one
prerequisite in order to be able to handle such errors in the context
where the kick is triggered.
This patch changes the notify API. The notify function must return a
bool return value. It returns false if the host notification failed.
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
We've already tested that it's an error.
Cc: Robert Tivy <rtivy@ti.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc
Pull remoteproc fixes from Ohad Ben-Cohen:
"Trivial remoteproc fixes by Suman Anna, Wei Yongjun and Thomas Meyer"
* tag 'remoteproc-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc:
remoteproc: Cocci spatch "memdup.spatch"
remoteproc: free carveout memories only after unmapping them
remoteproc/omap: fix a sparse warning
remoteproc: fix checkpatch errors in remoteproc code
remoteproc: fix error return code in rproc_fw_boot()
|
|
Use kmemdup instead of kmalloc + memcpy.
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
It is not preferable to have the allocated pages for carveout
memories freed before they are unmapped. The code that deals
with the cleanup of carveout memories is therefore moved after
the corresponding mapping entries were cleaned up.
This is mostly a no-op since the remote processors are already
stopped when the cleanup function is called, but this will make
the cleanup code follow the exact reverse path of allocation.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
This patch fixes relevant checkpatch errors and warnings
in the remoteproc source files.
Signed-off-by: Suman Anna <s-anna@ti.com>
[drop 80-char-lines checkpatch fixes and update commit log accordingly]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
Set 'ret' to -EINVAL when needed, so a sensible return value
is returned on errors.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
[fix additional instances of this bug as well, update commit log]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
The mailbox hardware (in OMAP) uses a queued mailbox interrupt
mechanism that provides a communication channel between processors
through a set of registers and their associated interrupt signals
by sending and receiving messages.
The OMAP mailbox framework/driver code is moved to be under
drivers/mailbox, in preparation for adapting to a common mailbox
driver framework. This allows the build for OMAP mailbox to be
enabled (it was disabled during the multi-platform support).
As part of the migration from plat and mach code:
- Kconfig symbols have been renamed to build OMAP1 or OMAP2+ drivers.
- mailbox.h under plat-omap/plat/include has been split into a public
and private header files. The public header has only the API related
functions and types.
- The module name mailbox.ko from plat-omap is changed to
omap-mailbox.ko
- The module name mailbox_mach.ko from mach-omapX is changed as
mailbox_omap1.ko for OMAP1
mailbox_omap2.ko for OMAP2+
Cc: Tony Lindgren <tony@atomide.com>
[gregkh@linuxfoundation.org: ack for staging part]
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Omar Ramirez Luna <omar.ramirez@copitl.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc
Pull remoteproc update from Ohad Ben-Cohen:
- Some refactoring, cleanups and small improvements from Sjur
Brændeland. The improvements are mainly about better supporting
varios virtio properties (such as virtio's config space, status and
features). I now see that I messed up while commiting one of Sjur's
patches and erroneously put myself as the author, as well as letting
a nasty typo sneak in. I will not fix this in order to avoid
rebasing the patches. Sjur - sorry!
- A new remoteproc driver for OMAP-L13x (technically a DaVinci
platform) from Robert Tivy.
- Extend OMAP support to OMAP5 as well, from Vincent Stehlé.
- Fix Kconfig VIRTUALIZATION dependency, from Suman Anna (a
non-critical fix which arrived late during the rc cycle).
* tag 'remoteproc-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc:
remoteproc: fix kconfig dependencies for VIRTIO
remoteproc/davinci: add a remoteproc driver for OMAP-L13x DSP
remoteproc: support default firmware name in rproc_alloc()
remoteproc/omap: support OMAP5 too
remoteproc: set vring addresses in resource table
remoteproc: support virtio config space.
remoteproc: perserve resource table data
remoteproc: calculate max_notifyid by counting vrings
remoteproc: code cleanup of resource parsing
remoteproc: parse STE-firmware and find resource table address
remoteproc: add find_loaded_rsc_table firmware ops
remoteproc: refactor rproc_elf_find_rsc_table()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree updates from Jiri Kosina:
"Usual stuff, mostly comment fixes, typo fixes, printk fixes and small
code cleanups"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (45 commits)
mm: Convert print_symbol to %pSR
gfs2: Convert print_symbol to %pSR
m32r: Convert print_symbol to %pSR
iostats.txt: add easy-to-find description for field 6
x86 cmpxchg.h: fix wrong comment
treewide: Fix typo in printk and comments
doc: devicetree: Fix various typos
docbook: fix 8250 naming in device-drivers
pata_pdc2027x: Fix compiler warning
treewide: Fix typo in printks
mei: Fix comments in drivers/misc/mei
treewide: Fix typos in kernel messages
pm44xx: Fix comment for "CONFIG_CPU_IDLE"
doc: Fix typo "CONFIG_CGROUP_CGROUP_MEMCG_SWAP"
mmzone: correct "pags" to "pages" in comment.
kernel-parameters: remove outdated 'noresidual' parameter
Remove spurious _H suffixes from ifdef comments
sound: Remove stray pluses from Kconfig file
radio-shark: Fix printk "CONFIG_LED_CLASS"
doc: put proper reference to CONFIG_MODULE_SIG_ENFORCE
...
|
|
Fix typo in printk and comments within various drivers.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Fix this:
warning: (VIRTIO_PCI && VIRTIO_MMIO && REMOTEPROC && RPMSG) selects VIRTIO which has unmet direct dependencies (VIRTUALIZATION)
Cc: stable@vger.kernel.org
Signed-off-by: Suman Anna <s-anna@ti.com>
[edit commit log]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
Adding a new remoteproc driver for OMAP-L13x DSP
Signed-off-by: Robert Tivy <rtivy@ti.com>
[removed 'EXPERIMENTAL' and fixed some indentation issues]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
If rproc_alloc isn't given a firmware name, look for a default
one using the "rproc-%s-fw" template.
Signed-off-by: Robert Tivy <rtivy@ti.com>
[add commit log, document change, use snprintf, minor style change]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
Fix obvious typo introduced in commit e121aefa7d9f10eee5cf26ed47129237a05d940b
("remoteproc: fix missing CONFIG_FW_LOADER configurations").
Cc: stable@vger.kernel.org
Signed-off-by: Robert Tivy <rtivy@ti.com>
[cc stable, slight subject change]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
This allows building remoteproc on OMAP5 too.
Signed-off-by: Vincent Stehlé <v-stehle@ti.com>
[edit commit log]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
Set the vring addresses in the resource table so that
the remote device can read the actual addresses used.
Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Acked-by: Ido Yariv <ido@wizery.com>
[rebase]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
Support virtio configuration space and device status. The virtio
device can now access the resource table in shared memory.
Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Acked-by: Ido Yariv <ido@wizery.com>
[rebase and style changes]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
Copy resource table from first to second firmware loading.
After firmware is loaded to memory, update the vdevs resource
pointer to the resource table kept in device memory.
Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Acked-by: Ido Yariv <ido@wizery.com>
[rebase, terminology and style changes]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
Simplify handling of max_notifyid by simply counting the
number of vrings.
Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Acked-by: Ido Yariv <ido@wizery.com>
[small terminology changes]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
Combine the almost identical functions rproc_handle_virtio_rsc
and rproc_handle_boot_rsc.
Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Acked-by: Ido Yariv <ido@wizery.com>
[small terminology and style changes]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
Parse the STE firmware and scan the TOC-table to find the address
of the loaded resource table.
Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
[rebase patch; update terminology]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
Add function find_loaded_rsc_table to firmware ops. This function
returns the location of the resource table in shared memory
after loading.
Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Acked-by: Ido Yariv <ido@wizery.com>
[align function name with existing terminology, update commit log]
[document new function, rebase patch, small cleanups]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
Refactor rproc_elf_find_rsc_table() and split out the scanning
for the section header named resource table. This is done to
prepare for loading firmware once.
Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Acked-by: Ido Yariv <ido@wizery.com>
[small function name change to make the code easier to read]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
Remove the vdev entry from the list before freeing it,
otherwise rproc->vdevs will explode.
Cc: stable@vger.kernel.org
Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Acked-by: Ido Yariv <ido@wizery.com>
[edit subject, minor commit log edit, cc stable]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
Fixes coherent memory leakage, caused by non-deallocated
firmware image chunk.
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Tarnyagin <dmitry.tarnyagin@stericsson.com>
Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Acked-by: Ido Yariv <ido@wizery.com>
[slightly edit subject and commit log]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
The new idr_alloc interface returns the allocated id back
on success, so fix the error path to check for negative
values. This was missed out in the newer idr interface
adoption patch, 15fc611 "remoteproc: convert to idr_alloc()".
Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
Convert to the much saner new idr interface.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
