summaryrefslogtreecommitdiff
path: root/drivers/remoteproc
AgeCommit message (Collapse)Author
2021-03-18remoteproc: Introduce function rproc_detach()Mathieu Poirier
Introduce function rproc_detach() to enable the remoteproc core to release the resources associated with a remote processor without stopping its operation. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Link: https://lore.kernel.org/r/20210312162453.1234145-11-mathieu.poirier@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-18remoteproc: Introduce function __rproc_detach()Mathieu Poirier
Introduce function __rproc_detach() to perform the same kind of operation as rproc_stop(), but instead of switching off the remote processor using rproc->ops->stop(), it uses rproc->ops->detach(). That way it is possible for the core to release the resources associated with a remote processor while the latter is kept operating. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Link: https://lore.kernel.org/r/20210312162453.1234145-10-mathieu.poirier@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-18remoteproc: stm32: Move memory parsing to rproc_opsArnaud POULIQUEN
Some actions such as memory resources reallocation are needed when trying to reattach a co-processor. Use the prepare() operation for these actions. Co-developed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Arnaud POULIQUEN <arnaud.pouliquen@foss.st.com> Link: https://lore.kernel.org/r/20210312162453.1234145-8-mathieu.poirier@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-18remoteproc: stm32: Move resource table setup to rproc_opsMathieu Poirier
Move the setting of the resource table installed by an external entity to rproc_ops::get_loaded_rsc_table(). This is to support scenarios where a remote processor has been attached to but is detached at a later stage. To re-attach the remote processor, the address of the resource table needs to be available at a later time than the platform driver's probe() function. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Link: https://lore.kernel.org/r/20210312162453.1234145-7-mathieu.poirier@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-18remoteproc: Add new get_loaded_rsc_table() to rproc_opsMathieu Poirier
Add a new get_loaded_rsc_table() operation in order to support scenarios where the remoteproc core has booted a remote processor and detaches from it. When re-attaching to the remote processor, the core needs to know where the resource table has been placed in memory. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Link: https://lore.kernel.org/r/20210312162453.1234145-6-mathieu.poirier@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-18remoteproc: Properly represent the attached stateMathieu Poirier
There is a need to know when a remote processor has been attached to rather than booted by the remoteproc core. In order to avoid manipulating two variables, i.e rproc::autonomous and rproc::state, get rid of the former and simply use the newly introduced RPROC_ATTACHED state. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Link: https://lore.kernel.org/r/20210312162453.1234145-5-mathieu.poirier@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-18remoteproc: Add new RPROC_ATTACHED stateMathieu Poirier
Add a new RPROC_ATTACHED state to take into account scenarios where the remoteproc core needs to attach to a remote processor that is booted by another entity. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Link: https://lore.kernel.org/r/20210312162453.1234145-4-mathieu.poirier@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-18remoteproc: Rename function rproc_actuate()Mathieu Poirier
Rename function rproc_actuate() to rproc_attach(). That way it is easy to understand that it does the opposite of rproc_detach(). Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Link: https://lore.kernel.org/r/20210312162453.1234145-3-mathieu.poirier@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-18remoteproc: Remove useless check in rproc_del()Mathieu Poirier
Whether started at probe() time or thereafter from the command line, a remote processor needs to be shut down before the final cleanup phases can happen. Otherwise the system may be left in an unpredictable state where the remote processor is expecting the remoteproc core to be providing services when in fact it no longer exist. Invariably calling rproc_shutdown() is fine since it will return immediately if the remote processor has already been switched off. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Link: https://lore.kernel.org/r/20210312162453.1234145-2-mathieu.poirier@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-18remoteproc: qcom_q6v5_mss: Validate p_filesz in ELF loaderBjorn Andersson
Analog to the issue in the common mdt_loader code the MSS ELF loader does not validate that p_filesz bytes will fit in the memory region and that the loaded segments are not truncated. Fix this in the same way as proposed for the mdt_loader. Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Fixes: 135b9e8d1cd8 ("remoteproc: qcom_q6v5_mss: Validate modem blob firmware size before load") Link: https://lore.kernel.org/r/20210312232002.3466791-1-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-18remoteproc: qcom_q6v5_mss: Provide errors for firmware-name parsingBjorn Andersson
Failing to read the "firmware-name" DT property without informing the developer is annoying, add some helpful debug prints. Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20210312002605.3273255-1-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-17remoteproc: pru: Fix firmware loading crashes on K3 SoCsSuman Anna
The K3 PRUs are 32-bit processors and in general have some limitations in using the standard ARMv8 memcpy function for loading firmware segments, so the driver already uses a custom memcpy implementation. This added logic however is limited to only IRAMs at the moment, but the loading into Data RAMs is not completely ok either and does generate a kernel crash for unaligned accesses. Fix these crashes by removing the existing IRAM logic limitation and extending the custom memcpy usage to Data RAMs as well for all K3 SoCs. Fixes: 1d39f4d19921 ("remoteproc: pru: Add support for various PRU cores on K3 AM65x SoCs") Signed-off-by: Suman Anna <s-anna@ti.com> Link: https://lore.kernel.org/r/20210315205859.19590-1-s-anna@ti.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-12remoteproc: imx_rproc: fix return value check in imx_rproc_addr_init()Wei Yongjun
In case of error, the function devm_ioremap() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Fixes: ecadcc47492c ("remoteproc: imx_rproc: use devm_ioremap") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20210312080420.277151-1-weiyongjun1@huawei.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-11remoteproc: imx_proc: enable virtio/mailboxPeng Fan
Use virtio/mailbox to build connection between Remote Proccessors and Linux. Add work queue to handle incoming messages. Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com> Reviewed-by: Mathieu Poirier <mathieu.poirer@linaro.org> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/1615029865-23312-11-git-send-email-peng.fan@oss.nxp.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-11remoteproc: imx_rproc: ignore mapping vdev regionsPeng Fan
vdev regions are vdev0vring0, vdev0vring1, vdevbuffer and similar. They are handled by remoteproc common code, no need to map in imx rproc driver. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/1615029865-23312-10-git-send-email-peng.fan@oss.nxp.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-11remoteproc: imx_rproc: support i.MX8MQ/MPeng Fan
Add i.MX8MQ dev/sys addr map and configuration data structure i.MX8MM share i.MX8MQ settings. Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/1615029865-23312-9-git-send-email-peng.fan@oss.nxp.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-11remoteproc: imx_rproc: add i.MX specific parse fw hookPeng Fan
The hook is used to parse memory-regions and load resource table from the address the remote processor published. Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/1615029865-23312-8-git-send-email-peng.fan@oss.nxp.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-11remoteproc: imx_rproc: use devm_ioremapPeng Fan
We might need to map an region multiple times, becaue the region might be shared between remote processors, such i.MX8QM with dual M4 cores. So use devm_ioremap, not devm_ioremap_resource. Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/1615029865-23312-7-git-send-email-peng.fan@oss.nxp.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-11remoteproc: imx_rproc: correct err messagePeng Fan
It is using devm_ioremap, so not devm_ioremap_resource. Correct the error message and print out sa/size. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/1615029865-23312-6-git-send-email-peng.fan@oss.nxp.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-11remoteproc: add is_iomem to da_to_vaPeng Fan
Introduce an extra parameter is_iomem to da_to_va, then the caller could take the memory as normal memory or io mapped memory. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/1615029865-23312-5-git-send-email-peng.fan@oss.nxp.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-11remoteproc: core: Remove casting to rproc_handle_resource_tJindong Yue
There are four different callback functions that are used for the rproc_handle_resource_t callback that all have different second parameter types. rproc_handle_vdev -> struct fw_rsc_vdev rproc_handle_trace -> struct fw_rsc_trace rproc_handle_devmem -> struct fw_rsc_devmem rproc_handle_carveout -> struct fw_rsc_carveout These callbacks are cast to rproc_handle_resource_t so that there is no error about incompatible pointer types. Unfortunately, this is a Clang's Control-Flow Integrity checking violation, which verifies that the callback function's types match the prototypes exactly before jumping. [ 7.275750] Kernel panic - not syncing: CFI failure (target: rproc_handle_vdev+0x0/0x4) [ 7.283763] CPU: 2 PID: 1 Comm: init Tainted: G C O 5.4.70-03301-g527af2c96672 #17 [ 7.292463] Hardware name: NXP i.MX8MPlus EVK board (DT) [ 7.297779] Call trace: [ 7.300232] dump_backtrace.cfi_jt+0x0/0x4 [ 7.304337] show_stack+0x18/0x24 [ 7.307660] dump_stack+0xb8/0x114 [ 7.311069] panic+0x164/0x3d4 [ 7.314130] __ubsan_handle_cfi_check_fail_abort+0x0/0x14 [ 7.319533] perf_proc_update_handler+0x0/0xcc [ 7.323983] __cfi_check+0x63278/0x6a290 [ 7.327913] rproc_boot+0x3f8/0x738 [ 7.331404] rproc_add+0x68/0x110 [ 7.334738] imx_rproc_probe+0x5e4/0x708 [imx_rproc] [ 7.339711] platform_drv_probe+0xac/0xf0 [ 7.343726] really_probe+0x260/0x65c [ 7.347393] driver_probe_device+0x64/0x100 [ 7.351580] device_driver_attach+0x6c/0xac [ 7.355766] __driver_attach+0xdc/0x184 [ 7.359609] bus_for_each_dev+0x98/0x104 [ 7.363537] driver_attach+0x24/0x30 [ 7.367117] bus_add_driver+0x100/0x1e0 [ 7.370958] driver_register+0x78/0x114 [ 7.374800] __platform_driver_register+0x44/0x50 [ 7.379514] init_module+0x20/0xfe8 [imx_rproc] [ 7.384049] do_one_initcall+0x190/0x348 [ 7.387979] do_init_module+0x5c/0x210 [ 7.391731] load_module+0x2fbc/0x3590 [ 7.395485] __arm64_sys_finit_module+0xb8/0xec [ 7.400025] el0_svc_common+0xb4/0x19c [ 7.403777] el0_svc_handler+0x74/0x98 [ 7.407531] el0_svc+0x8/0xc [ 7.410419] SMP: stopping secondary CPUs [ 7.414648] Kernel Offset: disabled [ 7.418142] CPU features: 0x00010002,2000200c [ 7.422501] Memory Limit: none To fix this, change the second parameter of all functions to void * and use a local variable with the correct type so that everything works properly. With this, we can remove casting to rproc_handle_resource_t for these functions. Signed-off-by: Jindong Yue <jindong.yue@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20210224055825.7417-1-jindong.yue@nxp.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-11remoteproc: pru: Replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTEYang Li
Fix the following coccicheck warning: ./drivers/remoteproc/pru_rproc.c:247:0-23: WARNING: pru_rproc_debug_ss_fops should be defined with DEFINE_DEBUGFS_ATTRIBUTE Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/1614154829-42461-1-git-send-email-yang.lee@linux.alibaba.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-08remoteproc: sysfs: Use sysfs_emit instead of sprintfRaghavendra Rao Ananta
For security reasons sysfs_emit() is preferred over sprintf(). Hence, convert the remoteproc's sysfs show functions accordingly. Signed-off-by: Raghavendra Rao Ananta <rananta@codeaurora.org> Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org> Link: https://lore.kernel.org/r/1614808022-26062-1-git-send-email-sidgup@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-08remoteproc: pru: Fix loading of GNU Binutils ELFDimitar Dimitrov
PRU port of GNU Binutils lacks support for separate address spaces. PRU IRAM addresses are marked with artificial offset to differentiate them from DRAM addresses. Hence remoteproc must mask IRAM addresses coming from GNU ELF in order to get the true hardware address. PRU firmware used for testing was the example in: https://github.com/dinuxbg/pru-gcc-examples/tree/master/blinking-led/pru Signed-off-by: Dimitar Dimitrov <dimitar@dinux.eu> Link: https://lore.kernel.org/r/20201230105005.30492-1-dimitar@dinux.eu Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-08remoteproc: qcom: pil_info: avoid 64-bit divisionArnd Bergmann
On 32-bit machines with 64-bit resource_size_t, the driver causes a link failure because of the 64-bit division: arm-linux-gnueabi-ld: drivers/remoteproc/qcom_pil_info.o: in function `qcom_pil_info_store': qcom_pil_info.c:(.text+0x1ec): undefined reference to `__aeabi_uldivmod' Add a cast to an u32 to avoid this. If the resource exceeds 4GB, there are bigger problems. Fixes: 549b67da660d ("remoteproc: qcom: Introduce helper to store pil info in IMEM") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210103135628.3702427-1-arnd@kernel.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-02-11remoteproc: qcom: pas: Add SM8350 PAS remoteprocsVinod Koul
Add audio, compute, modem and sensor DSP resources to the Qualcomm PAS driver. Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20210210104539.340349-2-vkoul@kernel.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-02-09remoteproc: core: Fix rproc->firmware free in rproc_set_firmware()Daniele Alessandrelli
rproc_alloc_firmware() (called by rproc_alloc()) can allocate rproc->firmware using kstrdup_const() and therefore should be freed using kfree_const(); however, rproc_set_firmware() frees it using the simple kfree(). This causes a kernel oops if a constant string is passed to rproc_alloc() and rproc_set_firmware() is subsequently called. Fix the above issue by using kfree_const() to free rproc->firmware in rproc_set_firmware(). Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com> Link: https://lore.kernel.org/r/20210118165904.719999-1-daniele.alessandrelli@linux.intel.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-02-09remoteproc/mediatek: support L1TCMTzung-Bi Shih
L1TCM is a high performance memory region in MT8192 SCP. Reads L1TCM memory region from DTS to determine if the machine supports. Loads L1TCM memory region to SCP sys if the firmware provides. Starts from MT8192 SCP, the firmware contains physical addresses for each memory region, for instance: Program Headers: Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align LOAD 0xXXXXXX 0xXXXXXXXX 0x10500000 0xXXXXX 0xXXXXX XXX 0xXXXX LOAD 0xXXXXXX 0xXXXXXXXX 0x10700000 0xXXXXX 0xXXXXX XXX 0xXXXX LOAD 0xXXXXXX 0xXXXXXXXX 0x50000000 0xXXXXX 0xXXXXX XXX 0xXXXX Kernel driver can use the "PhysAddr" (i.e. da in the da_to_va callbacks) to know the ELF segment belongs to which region. To backward compatible to MT8183 SCP, separates the da_to_va callbacks for new and legacy version. Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20210127083136.3745652-5-tzungbi@google.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-02-09remoteproc/mediatek: enable MPU for all memory regions in MT8192 SCPTzung-Bi Shih
The register MT8192_CORE0_MEM_ATT_PREDEF contains attributes for each memory region. It defines whether a memory region can be managed by MPU or not. In the past, due to the default settings in the register, MT8192 SCP works luckily. After enabling L1TCM, SCP starts to access memory region that is not included in the default settings. As a result, SCP hangs. Enables MPU for all memory regions in MT8192 SCP. Note that the register is read only once when SCP resets. Thus, it must be set from kernel side. Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20210127083136.3745652-3-tzungbi@google.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-02-09remoteproc/mediatek: use devm_platform_ioremap_resource_bynameTzung-Bi Shih
Replaces platform_get_resource_byname() and devm_ioremap_resource() pairs to devm_platform_ioremap_resource_byname(). Note that, not every pairs are applicable to replace. Especially when it needs to access the resource struct from platform_get_resource_byname(). For example: scp->sram_size = resource_size(res); Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20210127083136.3745652-2-tzungbi@google.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-02-09remoteproc: ingenic: Add module parameter 'auto_boot'Paul Cercueil
Add a 'auto_boot' module parameter that instructs the remoteproc driver whether or not it should auto-boot the remote processor, which will default to "false", since the VPU in Ingenic SoCs does not really have any predetermined function. Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20210123142956.17865-1-paul@crapouillou.net Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-02-09remoteproc/mediatek: acknowledge watchdog IRQ after handledTzung-Bi Shih
Acknowledges watchdog IRQ after handled or kernel keeps receiving the interrupt. Fixes: fd0b6c1ff85a ("remoteproc/mediatek: Add support for mt8192 SCP") Signed-off-by: Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20210127082046.3735157-1-tzungbi@google.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-02-09remoteproc: qcom_wcnss: remove unneeded semicolonYang Li
Eliminate the following coccicheck warning: ./drivers/remoteproc/qcom_wcnss.c:573:2-3: Unneeded semicolon Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/1612320402-3313-1-git-send-email-yang.lee@linux.alibaba.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-02-09remoteproc: qcom: fix glink dependenciesArnd Bergmann
Building the remoteproc drivers into the kernel while the qcom_glink code is in a loadable module results in a link error: ld.lld: error: undefined symbol: qcom_glink_ssr_notify >>> referenced by vmlinux.o:(glink_subdev_unprepare) Add a Kconfig dependency to avoid this. Reviewed-by: Alex Elder <elder@linaro.org> Fixes: 8527efc59d45 ("rpmsg: glink: Guard qcom_glink_ssr_notify() with correct config") Fixes: 5d1f2e3c8090 ("soc: qcom: glink_ssr: Internalize ssr_notifiers") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210204154010.1585457-1-arnd@kernel.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-07remoteproc: stm32: improve debug using dev_err_probeArnaud Pouliquen
When possible use dev_err_probe help to properly deal with the PROBE_DEFER error. The benefit is that DEFER issue will be logged in the devices_deferred debugfs file. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss-st.com> Link: https://lore.kernel.org/r/20201217144125.12903-1-arnaud.pouliquen@foss.st.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-07remoteproc: qcom: add more help text qcom optionsShawn Guo
With these more help text added, hopefully it's easier to understand the distinctions of these qcom remoteproc drivers. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Link: https://lore.kernel.org/r/20201217030400.6235-1-shawn.guo@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-07remoteproc: qcom_wcnss: Add qcom,wcn3660b compatibleStephan Gerhold
WCN3660B is a variant of WCN3660, but with the same regulator requirements as WCN3620/WCN3680. As far as qcom_wcnss_iris is concerned we can just use qcom,wcn3680 (wcn3680_data). However, a separate compatible is needed for WCN3660B because the wcn36xx driver uses it to enable chip-specific functionality. In particular, it enables 802.11ac for qcom,wcn3680 which is not supported by WCN3660B. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20210106102134.59801-3-stephan@gerhold.net Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-12-16Merge tag 'arm-soc-drivers-5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "There are a couple of subsystems maintained by other people that merge their drivers through the SoC tree, those changes include: - The SCMI firmware framework gains support for sensor notifications and for controlling voltage domains. - A large update for the Tegra memory controller driver, integrating it better with the interconnect framework - The memory controller subsystem gains support for Mediatek MT8192 - The reset controller framework gains support for sharing pulsed resets For Soc specific drivers in drivers/soc, the main changes are - The Allwinner/sunxi MBUS gets a rework for the way it handles dma_map_ops and offsets between physical and dma address spaces. - An errata fix plus some cleanups for Freescale Layerscape SoCs - A cleanup for renesas drivers regarding MMIO accesses. - New SoC specific drivers for Mediatek MT8192 and MT8183 power domains - New SoC specific drivers for Aspeed AST2600 LPC bus control and SoC identification. - Core Power Domain support for Qualcomm MSM8916, MSM8939, SDM660 and SDX55. - A rework of the TI AM33xx 'genpd' power domain support to use information from DT instead of platform data - Support for TI AM64x SoCs - Allow building some Amlogic drivers as modules instead of built-in Finally, there are numerous cleanups and smaller bug fixes for Mediatek, Tegra, Samsung, Qualcomm, TI OMAP, Amlogic, Rockchips, Renesas, and Xilinx SoCs" * tag 'arm-soc-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (222 commits) soc: mediatek: mmsys: Specify HAS_IOMEM dependency for MTK_MMSYS firmware: xilinx: Properly align function parameter firmware: xilinx: Add a blank line after function declaration firmware: xilinx: Remove additional newline firmware: xilinx: Fix kernel-doc warnings firmware: xlnx-zynqmp: fix compilation warning soc: xilinx: vcu: add missing register NUM_CORE soc: xilinx: vcu: use vcu-settings syscon registers dt-bindings: soc: xlnx: extract xlnx, vcu-settings to separate binding soc: xilinx: vcu: drop useless success message clk: samsung: mark PM functions as __maybe_unused soc: samsung: exynos-chipid: initialize later - with arch_initcall soc: samsung: exynos-chipid: order list of SoCs by name memory: jz4780_nemc: Fix potential NULL dereference in jz4780_nemc_probe() memory: ti-emif-sram: only build for ARMv7 memory: tegra30: Support interconnect framework memory: tegra20: Support hardware versioning and clean up OPP table initialization dt-bindings: memory: tegra20-emc: Document opp-supported-hw property soc: rockchip: io-domain: Fix error return code in rockchip_iodomain_probe() reset-controller: ti: force the write operation when assert or deassert ...
2020-12-10remoteproc/mediatek: read IPI buffer offset from FWTzung-Bi Shih
Reads the IPI buffer offset from the FW binary. The information resides in addr of .ipi_buffer section. Moves scp_ipi_init() to rproc_ops::parse_fw() phase. The IPI buffer can be initialized only if the offset is clear. To backward compatible to MT8183 SCP, specify the offset in the board specific mtk_scp_of_data. Reads the default offset if the firmware doesn't have it. Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20201202044609.2501913-1-tzungbi@google.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-12-10remoteproc/mediatek: unprepare clk if scp_before_load failsTzung-Bi Shih
Fixes the error handling to unprepare clk if scp_before_load fails. Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Fixes: fd0b6c1ff85a ("remoteproc/mediatek: Add support for mt8192 SCP") Signed-off-by: Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20201203155914.3844426-1-tzungbi@google.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-12-10remoteproc: qcom: Fix potential NULL dereference in adsp_init_mmio()Zhang Changzhong
platform_get_resource() may fail and in this case a NULL dereference will occur. Fix it to use devm_platform_ioremap_resource() instead of calling platform_get_resource() and devm_ioremap(). This is detected by Coccinelle semantic patch. @@ expression pdev, res, n, t, e, e1, e2; @@ res = \(platform_get_resource\|platform_get_resource_byname\)(pdev, t, n); + if (!res) + return -EINVAL; ... when != res == NULL e = devm_ioremap(e1, res->start, e2); Fixes: dc160e449122 ("remoteproc: qcom: Introduce Non-PAS ADSP PIL driver") Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1607392460-20516-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-12-10remoteproc/mediatek: Fix kernel test robot warningSouptick Joarder
Kernel test robot throws below warning -> >> drivers/remoteproc/mtk_scp.c:755:37: warning: unused variable >> 'mt8183_of_data' [-Wunused-const-variable] static const struct mtk_scp_of_data mt8183_of_data = { ^ >> drivers/remoteproc/mtk_scp.c:765:37: warning: unused variable >> 'mt8192_of_data' [-Wunused-const-variable] static const struct mtk_scp_of_data mt8192_of_data = { ^ As suggested by Bjorn, there's no harm in just dropping the of_match_ptr() wrapping of mtk_scp_of_match in the definition of mtk_scp_driver and we avoid this whole problem. Reported-by: kernel test robot <lkp@intel.com> Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Link: https://lore.kernel.org/r/1606513855-21130-1-git-send-email-jrdr.linux@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-12-10remoteproc: k3-dsp: Fix return value check in k3_dsp_rproc_of_get_memories()YueHaibing
In case of error, the function devm_ioremap_wc() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Fixes: 6edbe024ba17 ("remoteproc: k3-dsp: Add a remoteproc driver of K3 C66x DSPs") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Suman Anna <s-anna@ti.com> Link: https://lore.kernel.org/r/20200905122503.17352-1-yuehaibing@huawei.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-12-10remoteproc: qcom: pas: fix error handling in adsp_pds_enableZhang Qilong
If the pm_runtime_get_sync failed in adsp_pds_enable when loop (i), The unroll_pd_votes will start from (i - 1), and it will resulted in following problems: 1) pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to pm_runtime_put_noidle will result in reference leak. 2) Have not reset pds[i] performance state. Then we fix it. Fixes: 17ee2fb4e8567 ("remoteproc: qcom: pas: Vote for active/proxy power domains") Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Link: https://lore.kernel.org/r/20201102143554.144707-1-zhangqilong3@huawei.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-12-10remoteproc: qcom: fix reference leak in adsp_startZhang Qilong
pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to pm_runtime_put_noidle will result in reference leak in adsp_start, so we should fix it. Fixes: dc160e4491222 ("remoteproc: qcom: Introduce Non-PAS ADSP PIL driver") Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Link: https://lore.kernel.org/r/20201102143534.144484-1-zhangqilong3@huawei.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-12-10remoteproc: q6v5-mss: fix error handling in q6v5_pds_enableZhang Qilong
If the pm_runtime_get_sync failed in q6v5_pds_enable when loop (i), The unroll_pd_votes will start from (i - 1), and it will resulted in following problems: 1) pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to pm_runtime_put_noidle will result in reference leak. 2) Have not reset pds[i] performance state. Then we fix it. Fixes: 4760a896be88e ("remoteproc: q6v5-mss: Vote for rpmh power domains") Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Link: https://lore.kernel.org/r/20201102143433.143996-1-zhangqilong3@huawei.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-12-10remoteproc/mtk_scp: surround DT device IDs with CONFIG_OFAlexandre Courbot
Now that this driver can be compiled with COMPILE_TEST, we have no guarantee that CONFIG_OF will also be defined. When that happens, a warning about mtk_scp_of_match being defined but unused will be reported so make sure this variable is only defined if of_match_ptr() actually uses it. Fixes: cbd2dca74926c0e4610c40923cc786b732c9e8ef remoteproc: scp: add COMPILE_TEST dependency Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Alexandre Courbot <acourbot@chromium.org> Link: https://lore.kernel.org/r/20201102074007.299222-1-acourbot@chromium.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-12-10remoteproc: qcom: Add minidump id for sm8150 modemSiddharth Gupta
Add minidump id for modem in sm8150 chipset so that the regions to be included in the coredump generated upon a crash is based on the minidump tables in SMEM instead of those in the ELF header. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by, Reviewed-by or Tested-by that you received previously.: Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org> Link: https://lore.kernel.org/r/1605819935-10726-5-git-send-email-sidgup@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-12-10remoteproc: qcom: Add capability to collect minidumpsSiddharth Gupta
This patch adds support for collecting minidump in the event of remoteproc crash. Parse the minidump table based on remoteproc's unique minidump-id, read all memory regions from the remoteproc's minidump table entry and expose the memory to userspace. The remoteproc platform driver can choose to collect a full/mini dump by specifying the coredump op. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Co-developed-by: Rishabh Bhatnagar <rishabhb@codeaurora.org> Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org> Co-developed-by: Gurbir Arora <gurbaror@codeaurora.org> Signed-off-by: Gurbir Arora <gurbaror@codeaurora.org> Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org> Link: https://lore.kernel.org/r/1605819935-10726-4-git-send-email-sidgup@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-12-10remoteproc: coredump: Add minidump functionalitySiddharth Gupta
This change adds a new kind of core dump mechanism which instead of dumping entire program segments of the firmware, dumps sections of the remoteproc memory which are sufficient to allow debugging the firmware. This function thus uses section headers instead of program headers during creation of the core dump elf. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Co-developed-by: Rishabh Bhatnagar <rishabhb@codeaurora.org> Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org> Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org> Link: https://lore.kernel.org/r/1605819935-10726-3-git-send-email-sidgup@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-13 07:48:05 +0000