summaryrefslogtreecommitdiff
path: root/drivers/regulator
AgeCommit message (Collapse)Author
2019-11-15regulator: da9062: add of_map_mode support for bucksChristoph Fritz
This patch adds of_map_mode support for bucks to set regulator modes from within regulator framework. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Link: https://lore.kernel.org/r/1573652416-9848-3-git-send-email-chf.fritz@googlemail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-15regulator: da9062: refactor buck modes into headerChristoph Fritz
This patch refactors buck modes into a header file so that device trees can make use of these mode constants. The new header filename uses da9063 because DA9063 was the earlier chip and its driver code will want updating at some point in a similar manner. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Link: https://lore.kernel.org/r/1573652416-9848-2-git-send-email-chf.fritz@googlemail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-15regulator: stpmic1: Set a default ramp delay valuePascal Paillet
Set a default ramp delay value to the regulators with the worst case value. Signed-off-by: pascal paillet <p.paillet@st.com> Link: https://lore.kernel.org/r/20191113161529.27739-1-p.paillet@st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-15regulator: core: Let boot-on regulators be powered offPascal Paillet
Boot-on regulators are always kept on because their use_count value is now incremented at boot time and never cleaned. Only increment count value for alway-on regulators. regulator_late_cleanup() is now able to power off boot-on regulators when unused. Fixes: 05f224ca6693 ("regulator: core: Clean enabling always-on regulators + their supplies") Signed-off-by: Pascal Paillet <p.paillet@st.com> Link: https://lore.kernel.org/r/20191113102737.27831-1-p.paillet@st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-15regulator: core: Don't try to remove device links if add failedSaravana Kannan
device_link_add() might not always succeed depending on the type of device link and the rest of the dependencies in the system. If device_link_add() didn't succeed, then we shouldn't try to remove the link later on as it might remove a link someone else created. Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20191115000438.45970-1-saravanak@google.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-07regulator: ab8500: Remove AB8505 USB regulatorStephan Gerhold
The USB regulator was removed for AB8500 in commit 41a06aa738ad ("regulator: ab8500: Remove USB regulator"). It was then added for AB8505 in commit 547f384f33db ("regulator: ab8500: add support for ab8505"). However, there was never an entry added for it in ab8505_regulator_match. This causes all regulators after it to be initialized with the wrong device tree data, eventually leading to an out-of-bounds array read. Given that it is not used anywhere in the kernel, it seems likely that similar arguments against supporting it exist for AB8505 (it is controlled by hardware). Therefore, simply remove it like for AB8500 instead of adding an entry in ab8505_regulator_match. Fixes: 547f384f33db ("regulator: ab8500: add support for ab8505") Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20191106173125.14496-1-stephan@gerhold.net Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-06regulator: fan53555: add chip id for Silergy SYR83XVasily Khoruzhick
SYR83X is used in Rockpro64 and it has die ID == 9. All other registers are the same as in SYR82X Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Link: https://lore.kernel.org/r/20191106161211.1700663-1-anarsoul@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-29regulator: fixed: add off-on-delayPeng Fan
Depends on board design, the gpio controlling regulator may connects with a big capacitance. When need off, it takes some time to let the regulator to be truly off. If not add enough delay, the regulator might have always been on, so introduce off-on-delay to handle such case. Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/1572311875-22880-3-git-send-email-peng.fan@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-28regulator: core: Allow generic coupling only for always-on regulatorsDmitry Osipenko
The generic voltage balancer doesn't work correctly if one of regulator couples turns off. Currently there are no users in kernel for that case, although let's explicitly show that this case is unsupported for those who will try to use that feature. Link: https://lore.kernel.org/linux-samsung-soc/20191008170503.yd6GscYPLxjgrXqDuCO7AJc6i6egNZGJkVWHLlCxvA4@z/ Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20191025002240.25288-2-digetx@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-28regulator: core: Release coupled_rdevs on regulator_init_coupling() errorDmitry Osipenko
This patch fixes memory leak which should happen if regulator's coupling fails to initialize. Fixes: d8ca7d184b33 ("regulator: core: Introduce API for regulators coupling customization") Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20191025002240.25288-1-digetx@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-23Merge tag 'regulator-fix-v5.4-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "There are a few core fixes here around error handling and handling if suspend mode configuration and some driver specific fixes here but the most important change is the fix to the fixed-regulator DT schema conversion introduced during the last merge window. That fixes one of the last two errors preventing successful execution of "make dt_binding_check" which will be enormously helpful for DT schema development" * tag 'regulator-fix-v5.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: qcom-rpmh: Fix PMIC5 BoB min voltage regulator: pfuze100-regulator: Variable "val" in pfuze100_regulator_probe() could be uninitialized regulator: lochnagar: Add on_off_delay for VDDCORE regulator: ti-abb: Fix timeout in ti_abb_wait_txdone/ti_abb_clear_all_txdone regulator: da9062: fix suspend_enable/disable preparation dt-bindings: fixed-regulator: fix compatible enum regulator: fixed: Prevent NULL pointer dereference when !CONFIG_OF regulator: core: make regulator_register() EPROBE_DEFER aware regulator: of: fix suspend-min/max-voltage parsing
2019-10-23regulator: bd70528: Add MODULE_ALIAS to allow module auto loadingMatti Vaittinen
The bd70528 regulator driver is probed by MFD driver. Add MODULE_ALIAS in order to allow udev to load the module when MFD sub-device cell for regulators is added. Fixes: 99ea37bd1e7d7 ("regulator: bd70528: Support ROHM BD70528 regulator block") Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/20191023121452.GA1812@localhost.localdomain Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-09regulator: uniphier: use devm_platform_ioremap_resource() to simplify codeYueHaibing
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20191009150203.8052-1-yuehaibing@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-09regulator: stm32-vrefbuf: use devm_platform_ioremap_resource() to simplify codeYueHaibing
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20191009150138.11640-1-yuehaibing@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-08regulator: da9062: Simplify da9062_buck_set_mode for BUCK_MODE_MANUAL caseAxel Lin
The sleep flag bit decides the mode for BUCK_MODE_MANUAL case, simplify the logic as the result is the same. Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Link: https://lore.kernel.org/r/20191007115009.25672-2-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-08Merge branch 'regulator-5.4' into regulator-5.5Mark Brown
2019-10-08regulator: rk808: Remove rk817_set_suspend_voltage functionAxel Lin
The implement is exactly the same as rk808_set_suspend_voltage, so just use rk808_set_suspend_voltage instead. Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20191008010628.8513-3-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-08regulator: rk808: Fix warning message in rk817_set_ramp_delayAxel Lin
The default in rk817_set_ramp_delay is 25MV rather than 10MV. Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20191008010628.8513-2-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-08regulator: rk808: Constify rk817 regulator_opsAxel Lin
These regulator_ops variables never need to be modified, make them const so compiler can put them to .rodata. Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20191008010628.8513-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-07regulator: max77686: switch to using fwnode_gpiod_get_indexDmitry Torokhov
gpiod_get_from_of_node() is being retired in favor of fwnode_gpiod_get_index(), that behaves similar to gpiod_get_index(), but can work with arbitrary firmware node. It will also be able to support secondary software nodes. Let's switch this driver over. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Link: https://lore.kernel.org/r/20191004231017.130290-8-dmitry.torokhov@gmail.com Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-07regulator: tps65132: switch to using devm_fwnode_gpiod_get()Dmitry Torokhov
devm_fwnode_get_index_gpiod_from_child() is going away as the name is too unwieldy, let's switch to using the new devm_fwnode_gpiod_get(). Note that we no longer need to check for NULL as devm_fwnode_gpiod_get() will return -ENOENT if GPIO is missing. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Link: https://lore.kernel.org/r/20191004231017.130290-7-dmitry.torokhov@gmail.com Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-07regulator: da9211: switch to using devm_fwnode_gpiod_getDmitry Torokhov
devm_gpiod_get_from_of_node() is being retired in favor of devm_fwnode_gpiod_get_index(), that behaves similar to devm_gpiod_get_index(), but can work with arbitrary firmware node. It will also be able to support secondary software nodes. Let's switch this driver over. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Link: https://lore.kernel.org/r/20191004231017.130290-6-dmitry.torokhov@gmail.com Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-07regulator: s2mps11: switch to using devm_fwnode_gpiod_getDmitry Torokhov
devm_gpiod_get_from_of_node() is being retired in favor of devm_fwnode_gpiod_get_index(), that behaves similar to devm_gpiod_get_index(), but can work with arbitrary firmware node. It will also be able to support secondary software nodes. Let's switch this driver over. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Link: https://lore.kernel.org/r/20191004231017.130290-5-dmitry.torokhov@gmail.com Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-07regulator: tps65090: switch to using devm_fwnode_gpiod_getDmitry Torokhov
devm_gpiod_get_from_of_node() is being retired in favor of devm_fwnode_gpiod_get_index(), that behaves similar to devm_gpiod_get_index(), but can work with arbitrary firmware node. It will also be able to support secondary software nodes. Let's switch this driver over. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Link: https://lore.kernel.org/r/20191004231017.130290-4-dmitry.torokhov@gmail.com Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-07regulator: slg51000: switch to using fwnode_gpiod_get_indexDmitry Torokhov
devm_gpiod_get_from_of_node() is being retired in favor of [devm_]fwnode_gpiod_get_index(), that behaves similar to devm_gpiod_get_index(), but can work with arbitrary firmware node. It will also be able to support secondary software nodes. Let's switch this driver over. Note that now that we have a good non-devm API for getting GPIO from arbitrary firmware node, there is no reason to use devm API here as regulator core takes care of managing lifetime of "enable" GPIO and we were immediately detaching requested GPIO from devm anyway. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Link: https://lore.kernel.org/r/20191004231017.130290-3-dmitry.torokhov@gmail.com Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-07regulator: s5m8767: switch to using devm_fwnode_gpiod_getDmitry Torokhov
devm_gpiod_get_from_of_node() is being retired in favor of devm_fwnode_gpiod_get_index(), that behaves similar to devm_gpiod_get_index(), but can work with arbitrary firmware node. It will also be able to support secondary software nodes. Let's switch this driver over. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Link: https://lore.kernel.org/r/20191004231017.130290-2-dmitry.torokhov@gmail.com Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-07regulator: pbias: Get rid of struct pbias_regulator_dataAxel Lin
Only the desc field is really used, so use struct regulator_desc instead. Then struct pbias_regulator_data can be removed. Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20191007114320.20977-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-07regulator: da9062: Simplify the code iterating all regulatorsAxel Lin
It's more straightforward to use for statement here. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Steve Twiss <stwiss.opensource@diasemi.com> Link: https://lore.kernel.org/r/20191007115009.25672-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-04regulator: qcom-rpmh: add PM6150/PM6150L regulator supportKiran Gunda
Add support for PM6150/PM6150L regulators. This ensures that consumers are able to modify the physical state of PMIC regulators. Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Link: https://lore.kernel.org/r/1570183734-30706-3-git-send-email-kgunda@codeaurora.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-04regulator: max8907: Fix the usage of uninitialized variable in ↵Yizhuo
max8907_regulator_probe() Inside function max8907_regulator_probe(), variable val could be uninitialized if regmap_read() fails. However, val is used later in the if statement to decide the content written to "pmic", which is potentially unsafe. Signed-off-by: Yizhuo <yzhai003@ucr.edu> Link: https://lore.kernel.org/r/20191003175813.16415-1-yzhai003@ucr.edu Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-04regulator: qcom-rpmh: Fix PMIC5 BoB min voltageKiran Gunda
Correct the PMIC5 BoB min voltage from 0.3V to 3V. Also correct the voltage selector accordingly. Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Link: https://lore.kernel.org/r/1570184215-5355-1-git-send-email-kgunda@codeaurora.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-01regulator: bd718x7: Add MODULE_ALIAS()Guido Günther
This fixes device probing when built as a module Signed-off-by: Guido Günther <agx@sigxcpu.org> Link: https://lore.kernel.org/r/46ce3400e227dd88d51486c02a6152c9ec52acbb.1569875042.git.agx@sigxcpu.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-01regulator: pfuze100-regulator: Variable "val" in pfuze100_regulator_probe() ↵Yizhuo
could be uninitialized In function pfuze100_regulator_probe(), variable "val" could be initialized if regmap_read() fails. However, "val" is used to decide the control flow later in the if statement, which is potentially unsafe. Signed-off-by: Yizhuo <yzhai003@ucr.edu> Link: https://lore.kernel.org/r/20190929170957.14775-1-yzhai003@ucr.edu Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-01regulator: lochnagar: Add on_off_delay for VDDCORECharles Keepax
The VDDCORE regulator takes a good length of time to discharge down, so add an on_off_delay to ensure DCVDD is removed before it is powered on again. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20191001132017.1785-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-01regulator: pcap-regulator: remove unused variable 'SW3_table'YueHaibing
drivers/regulator/pcap-regulator.c:89:27: warning: SW3_table defined but not used [-Wunused-const-variable=] It is never used, so can be removed. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20190928085540.45332-1-yuehaibing@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-01regulator: da9063: Simplify da9063_buck_set_mode for BUCK_MODE_MANUAL caseAxel Lin
The sleep flag bit decides the mode for BUCK_MODE_MANUAL case, simplify the logic as the result is the same. Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Link: https://lore.kernel.org/r/20190926055128.23434-2-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-01regulator: pbias: Use of_device_get_match_dataAxel Lin
Use of_device_get_match_data to simplify the code a bit. Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20190925101256.19030-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-01regulator: qcom_spmi: Add support for PM8004 regulatorsAngelo G. Del Regno
This Power IC is used in combination with various PMIC combos, generally found on boards with MSM8992, MSM8994, MSM8996, MSM8956, MSM8976 and others, usually at address 0x5 on the SPMI bus, and its usual usage is to provide power to the GPU and/or to the CPU clusters (APC0/APC1). Signed-off-by: Angelo G. Del Regno <kholk11@gmail.com> Link: https://lore.kernel.org/r/20190921095043.62593-6-kholk11@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-01regulator: qcom_smd: Add PM8950 regulatorsAngelo G. Del Regno
The PM8950 provides 6 SMPS regulators, of which 5 HFSMPS and one FTSMPS2.5 (s5), and 23 LDOs. Add these to the RPM regulator driver. Signed-off-by: Angelo G. Del Regno <kholk11@gmail.com> Link: https://lore.kernel.org/r/20190921095043.62593-4-kholk11@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-01regulator: qcom_spmi: Add PM8950 SPMI regulatorAngelo G. Del Regno
The PM8950 has 5 HFSMPS, 1 FTSMPS2.5 (s5, controlling APC voltage) and 23 LDO regulators. Add the configuration for this chip. Signed-off-by: Angelo G. Del Regno <kholk11@gmail.com> Link: https://lore.kernel.org/r/20190921095043.62593-3-kholk11@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-01regulator: ti-abb: Fix timeout in ti_abb_wait_txdone/ti_abb_clear_all_txdoneAxel Lin
ti_abb_wait_txdone() may return -ETIMEDOUT when ti_abb_check_txdone() returns true in the latest iteration of the while loop because the timeout value is abb->settling_time + 1. Similarly, ti_abb_clear_all_txdone() may return -ETIMEDOUT when ti_abb_check_txdone() returns false in the latest iteration of the while loop. Fix it. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20190929095848.21960-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-23regulator: da9062: fix suspend_enable/disable preparationMarco Felsch
Currently the suspend reg_field maps to the pmic voltage selection bits and is used during suspend_enabe/disable() and during get_mode(). This seems to be wrong for both use cases. Use case one (suspend_enabe/disable): Those callbacks are used to mark a regulator device as enabled/disabled during suspend. Marking the regulator enabled during suspend is done by the LDOx_CONF/BUCKx_CONF bit within the LDOx_CONT/BUCKx_CONT registers. Setting this bit tells the DA9062 PMIC state machine to keep the regulator on in POWERDOWN mode and switch to suspend voltage. Use case two (get_mode): The get_mode callback is used to retrieve the active mode state. Since the regulator-setting-A is used for the active state and regulator-setting-B for the suspend state there is no need to check which regulator setting is active. Fixes: 4068e5182ada ("regulator: da9062: DA9062 regulator driver") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Link: https://lore.kernel.org/r/20190917124246.11732-2-m.felsch@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-23regulator: fixed: Prevent NULL pointer dereference when !CONFIG_OFAxel Lin
Use of_device_get_match_data which has NULL test for match before dereference match->data. Add NULL test for drvtype so it still works for fixed_voltage_ops when !CONFIG_OF. Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Philippe Schenker <philippe.schenker@toradex.com> Link: https://lore.kernel.org/r/20190922022928.28355-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-17Merge tag 'leds-for-5.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED updates from Jacek Anaszewski: "In this cycle we've finally managed to contribute the patch set sorting out LED naming issues. Besides that there are many changes scattered among various LED class drivers and triggers. LED naming related improvements: - add new 'function' and 'color' fwnode properties and deprecate 'label' property which has been frequently abused for conveying vendor specific names that have been available in sysfs anyway - introduce a set of standard LED_FUNCTION* definitions - introduce a set of standard LED_COLOR_ID* definitions - add a new {devm_}led_classdev_register_ext() API with the capability of automatic LED name composition basing on the properties available in the passed fwnode; the function is backwards compatible in a sense that it uses 'label' data, if present in the fwnode, for creating LED name - add tools/leds/get_led_device_info.sh script for retrieving LED vendor, product and bus names, if applicable; it also performs basic validation of an LED name - update following drivers and their DT bindings to use the new LED registration API: - leds-an30259a, leds-gpio, leds-as3645a, leds-aat1290, leds-cr0014114, leds-lm3601x, leds-lm3692x, leds-lp8860, leds-lt3593, leds-sc27xx-blt Other LED class improvements: - replace {devm_}led_classdev_register() macros with inlines - allow to call led_classdev_unregister() unconditionally - switch to use fwnode instead of be stuck with OF one LED triggers improvements: - led-triggers: - fix dereferencing of null pointer - fix a memory leak bug - ledtrig-gpio: - GPIO 0 is valid Drop superseeded apu2/3 support from leds-apu since for apu2+ a newer, more complete driver exists, based on a generic driver for the AMD SOCs gpio-controller, supporting LEDs as well other devices: - drop profile field from priv data - drop iosize field from priv data - drop enum_apu_led_platform_types - drop superseeded apu2/3 led support - add pr_fmt prefix for better log output - fix error message on probing failure Other misc fixes and improvements to existing LED class drivers: - leds-ns2, leds-max77650: - add of_node_put() before return - leds-pwm, leds-is31fl32xx: - use struct_size() helper - leds-lm3697, leds-lm36274, leds-lm3532: - switch to use fwnode_property_count_uXX() - leds-lm3532: - fix brightness control for i2c mode - change the define for the fs current register - fixes for the driver for stability - add full scale current configuration - dt: Add property for full scale current. - avoid potentially unpaired regulator calls - move static keyword to the front of declarations - fix optional led-max-microamp prop error handling - leds-max77650: - add of_node_put() before return - add MODULE_ALIAS() - Switch to fwnode property API - leds-as3645a: - fix misuse of strlcpy - leds-netxbig: - add of_node_put() in netxbig_leds_get_of_pdata() - remove legacy board-file support - leds-is31fl319x: - simplify getting the adapter of a client - leds-ti-lmu-common: - fix coccinelle issue - move static keyword to the front of declaration - leds-syscon: - use resource managed variant of device register - leds-ktd2692: - fix a typo in the name of a constant - leds-lp5562: - allow firmware files up to the maximum length - leds-an30259a: - fix typo - leds-pca953x: - include the right header" * tag 'leds-for-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: (72 commits) leds: lm3532: Fix optional led-max-microamp prop error handling led: triggers: Fix dereferencing of null pointer leds: ti-lmu-common: Move static keyword to the front of declaration leds: lm3532: Move static keyword to the front of declarations leds: trigger: gpio: GPIO 0 is valid leds: pwm: Use struct_size() helper leds: is31fl32xx: Use struct_size() helper leds: ti-lmu-common: Fix coccinelle issue in TI LMU leds: lm3532: Avoid potentially unpaired regulator calls leds: syscon: Use resource managed variant of device register leds: Replace {devm_}led_classdev_register() macros with inlines leds: Allow to call led_classdev_unregister() unconditionally leds: lm3532: Add full scale current configuration dt: lm3532: Add property for full scale current. leds: lm3532: Fixes for the driver for stability leds: lm3532: Change the define for the fs current register leds: lm3532: Fix brightness control for i2c mode leds: Switch to use fwnode instead of be stuck with OF one leds: max77650: Switch to fwnode property API led: triggers: Fix a memory leak bug ...
2019-09-17regulator: core: make regulator_register() EPROBE_DEFER awareMarco Felsch
Sometimes it can happen that the regulator_of_get_init_data() can't retrieve the config due to a not probed device the regulator depends on. Fix that by checking the return value of of_parse_cb() and return EPROBE_DEFER in such cases. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Link: https://lore.kernel.org/r/20190917154021.14693-4-m.felsch@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-17regulator: of: fix suspend-min/max-voltage parsingMarco Felsch
Currently the regulator-suspend-min/max-microvolt must be within the root regulator node but the dt-bindings specifies it as subnode properties for the regulator-state-[mem/disk/standby] node. The only DT using this bindings currently is the at91-sama5d2_xplained.dts and this DT uses it correctly. I don't know if it isn't tested but it can't work without this fix. Fixes: f7efad10b5c4 ("regulator: add PM suspend and resume hooks") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Link: https://lore.kernel.org/r/20190917154021.14693-3-m.felsch@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-11regulator: core: Fix error return for /sys accessH. Nikolaus Schaller
regulator_uV_show() is missing error handling if regulator_get_voltage_rdev() returns negative values. Instead it prints the errno as a string, e.g. -EINVAL as "-22" which could be interpreted as -22 µV. We also do not need to hold the lock while converting the integer to a string. Reported-by: Adam Ford <aford173@gmail.com> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Tested-by: Adam Ford <aford173@gmail.com> Link: https://lore.kernel.org/r/f37f2a1276efcb34cf3b7f1a25481175be048806.1568143348.git.hns@goldelico.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-11regulator: da9211: fix obtaining "enable" GPIODmitry Torokhov
This fixes 11da04af0d3b, as devm_gpiod_get_from_of_node() does not do translation "con-id" -> "con-id-gpios" that our bindings expects, and therefore it was wrong to change connection ID to be simply "enable" when moving to using devm_gpiod_get_from_of_node(). Fixes: 11da04af0d3b ("regulator: da9211: Pass descriptors instead of GPIO numbers") Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Link: https://lore.kernel.org/r/20190910170246.GA56792@dtor-ws Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-11regulator: max77686: fix obtaining "maxim,ena" GPIODmitry Torokhov
This fixes 96392c3d8ca4, as devm_gpiod_get_from_of_node() does not do translation "con-id" -> "con-id-gpios" that our bindings expects, and therefore it was wrong to change connection ID to be simply "maxim,ena" when moving to using devm_gpiod_get_from_of_node(). Fixes: 96392c3d8ca4 ("regulator: max77686: Pass descriptor instead of GPIO number") Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Link: https://lore.kernel.org/r/20190910170050.GA55530@dtor-ws Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-10regulator: uniphier: Add Pro5 USB3 VBUS supportKunihiko Hayashi
Pro5 SoC has same scheme of USB3 VBUS as Pro4, so the data for Pro5 is equivalent to Pro4. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/1568080304-1572-1-git-send-email-hayashi.kunihiko@socionext.com Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 08:25:48 +0000