summaryrefslogtreecommitdiff
path: root/drivers/regulator
AgeCommit message (Collapse)Author
2020-03-30Merge tag 'regulator-spi-v5.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc Pull spi and regulator updates from Mark Brown: "At one point in the release cycle I managed to fat finger things and apply some SPI fixes onto a regulator branch and merge that into the SPI tree, then pull in a change shared with the MTD tree moving the Mediatek quadspi driver over to become the Mediatek spi-nor driver in the SPI tree. This has made a mess which I only just noticed while preparing this and I can't see a sensible way to unpick things due to other subsequent merge commits especially the pull from MTD so it looks like the most sensible thing to do is give up and combine the two pull requests. Fortunately both subsystems were fairly quiet this cycle, the highlights are: regulator: - Support for Monoloithic Power Systems MP5416, MP8867 and MPS8869 and Qualcomm PMI8994 and SMB208. SPI: - Lots of enhancements for spi-fsl-dspi, including XSPI mode support, from Vladimir Oltean. - Support for amlogic Meson G12A, IBM FSI, Mediatek spi-nor (moved from MTD), NXP i.MX8Mx, Rockchip PX30, RK3308 and RK3328, and Qualcomm Atheros AR934x/QCA95xx" * tag 'regulator-spi-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc: (118 commits) spi: efm32: Convert to use GPIO descriptors regulator: qcom_smd: Add pmi8994 regulator support regulator: da9063: Fix get_mode() functions to read sleep field spi: spi-fsl-lpspi: Replace zero-length array with flexible-array member spi: spi-s3c24xx: Replace zero-length array with flexible-array member spi: stm32: Fix comments compilation warnings spi: atmel-quadspi: Add verbose debug facilities to monitor register accesses spi: spi-fsl-dspi: Add support for LS1028A spi: spi-fsl-dspi: Move invariant configs out of dspi_transfer_one_message spi: spi-fsl-dspi: Fix interrupt-less DMA mode taking an XSPI code path spi: spi-fsl-dspi: Avoid NULL pointer in dspi_slave_abort for non-DMA mode spi: spi-fsl-dspi: Replace interruptible wait queue with a simple completion spi: spi-fsl-dspi: Protect against races on dspi->words_in_flight spi: spi-fsl-dspi: Avoid reading more data than written in EOQ mode spi: spi-fsl-dspi: Fix bits-per-word acceleration in DMA mode spi: spi-fsl-dspi: Fix little endian access to PUSHR CMD and TXDATA spi: spi-fsl-dspi: Don't access reserved fields in SPI_MCR regulator: driver.h: fix regulator_map_* function names regulator: da9063: fix suspend spi: mxs: Drop GPIO includes ...
2020-03-24Merge branch 'regulator-5.7' into regulator-nextMark Brown
2020-03-24Merge branch 'regulator-5.6' into regulator-linusMark Brown
2020-03-24regulator: qcom_smd: Add pmi8994 regulator supportBjorn Andersson
The pmi8994 is commonly found on MSM8996 based devices, such as the Dragonboard 820c, where it supplies power to a number of LDOs on the primary PMIC. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20200324041424.518160-1-bjorn.andersson@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-24regulator: da9063: Fix get_mode() functions to read sleep fieldAdam Thomson
get_mode() is used to retrieve the active mode state. Settings-A config is used during active state, whilst Settings-B is for suspend. This means we only need to check the sleep field of each buck and LDO as that field solely relates to Settings-A config. This change is a clone of the get_mode() update which was committed as part of: - regulator: da9062: fix suspend_enable/disable preparation [a72865f057820ea9f57597915da4b651d65eb92f] Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Link: https://lore.kernel.org/r/20200324092516.60B5C3FB8D@swsrvapps-01.diasemi.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-18regulator: da9063: fix suspendMartin Fuzzey
The .set_suspend_enable() and .set_suspend_disable() methods are not supposed to immediately change the regulator state but just indicated if the regulator should be enabled or disabled when standby mode is entered (by a hardware signal). However currently they set control the SEL bits in the DVC registers, which causes the voltage to change to immediately between the "A" (normal) and "B" (standby) values as programmed and does nothing for the enable state... This means that "regulator-on-in-suspend" does not work (the regulator is switched off when the PMIC enters standby mode on the hardware signal) and, potentially, depending on the A and B voltage configurations the voltage could be incorrectly changed *before* actually entering suspend. The right bit to use for the functionality is the "CONF" bit in the "CONT" register. The detailed register description says "Sequencer target state" for this bit which is not very clear but the functional description is clearer. >From 5.1.5 System Enable: De-asserting SYS_EN (changing from active to passive state) clears control SYSTEM_EN which triggers a power down sequence into hibernate/standby mode ... With the exception of supplies that have the xxxx_CONF control bit asserted, all regulators in power domains POWER1, POWER, and SYSTEM are sequentially disabled in reverse order. Regulators with the <x>_CONF bit set remain on but change the active voltage controlregisters from V<x>_A to V<x>_B (if V<x>_B is notalready selected). Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group> Link: https://lore.kernel.org/r/1584461691-14344-1-git-send-email-martin.fuzzey@flowbird.group Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-16regulator: mp886x: add MP8867 supportJisheng Zhang
MP8867 is an I2C-controlled adjustable voltage regulator made by Monolithic Power Systems. The difference between MP8867 and MP8869 are: 1.If V_BOOT, the vref of MP8869 is fixed at 600mv while vref of MP8867 is determined by the I2C control. 2.For MP8867, when setting voltage, if the step is within 5, we need to manually set the GO BIT to 0. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Link: https://lore.kernel.org/r/20200316223127.4b1ecc92@xhacker Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-16regulator: add support for MP8869 regulatorJisheng Zhang
The MP8869 from Monolithic Power Systems is a single output DC/DC converter. The voltage can be controlled via I2C. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Link: https://lore.kernel.org/r/20200316223020.1a6d92ae@xhacker Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-13regulator: core: Avoid device name duplication in NORMAL_GETAndy Shevchenko
With current code: st-gyro-i2c i2c-PRP0001:00: i2c-PRP0001:00 supply vdd not found, using dummy regulator which looks a bit oververbose. Replace this with simplified format string for the above case, and drop "deviceless" case since for all dev_*() macros used in _regulator_get() the "(null)" will be printed anyway. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200312183245.1612-1-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-09Merge 5.6-rc5 into driver-core-nextGreg Kroah-Hartman
We need the driver core and debugfs changes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-06Merge tag 'regulator-fix-v5.6-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "A couple of small fixes, one for a minor issue in the stm32-vrefbuf driver and a documentation fix in the Qualcomm code" * tag 'regulator-fix-v5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: stm32-vrefbuf: fix a possible overshoot when re-enabling regulator: qcom_spmi: Fix docs for PM8004
2020-03-04regulator: Use driver_deferred_probe_timeout for regulator_init_complete_workJohn Stultz
The regulator_init_complete_work logic defers the cleanup for an arbitrary 30 seconds of time to allow modules loaded by userland to start. This arbitrary timeout is similar to the driver_deferred_probe_timeout value, and its been suggested we align these so users have a method to extend the timeouts as needed. So this patch changes the logic to use the driver_deferred_probe_timeout value for the delay value if it is set (using a delay of 0 if it is not). Cc: linux-pm@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <treding@nvidia.com> Cc: Mark Brown <broonie@kernel.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Saravana Kannan <saravanak@google.com> Cc: Todd Kjos <tkjos@google.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Kevin Hilman <khilman@kernel.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Rob Herring <robh@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Link: https://lore.kernel.org/r/20200225050828.56458-7-john.stultz@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-04regulator: stm32-vrefbuf: fix a possible overshoot when re-enablingFabrice Gasnier
There maybe an overshoot, when disabling, then re-enabling vrefbuf too quickly. VREFBUF is used by ADC/DAC on some boards. When re-enabling too quickly, an overshoot on the reference voltage make the conversions inaccurate for a short period of time. - Don't put the VREFBUF in HiZ when disabling, to force an active discharge. - Enforce a 1ms OFF/ON delay Fixes: 0cdbf481e927 ("regulator: Add support for stm32-vrefbuf") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Message-Id: <1583312132-20932-1-git-send-email-fabrice.gasnier@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-03regulator: anatop: Lower error message level for -EPROBE_DEFERAnson Huang
devm_regulator_register() could return -EPROBE_DEFER when trying to get init data and NOT all resources are available at that time, for this case, error message is better to be present for debug level ONLY. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Link: https://lore.kernel.org/r/1583243052-1930-1-git-send-email-Anson.Huang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-02regulator: pwm: Don't warn on probe deferralJon Hunter
Deferred probe is an expected return value for devm_pwm_get(). Given that the driver deals with it properly, rather than warn on probe deferral, only output a message on probe deferral if debug level prints are enabled. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20200302141428.14119-1-jonathanh@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-02regulator: anatop: Improve Kconfig dependencyAnson Huang
ANATOP regulator should depend on ARCH_MXC or COMPILE_TEST. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Link: https://lore.kernel.org/r/1583150118-8014-1-git-send-email-Anson.Huang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-02-26regulator: add smb208 supportAnsuel Smith
Smb208 regulators are used on some ipq806x soc. Add support for it to make it avaiable on some routers that use it. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Adrian Panella <ianchi74@outlook.com> Acked-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200219163711.479-1-ansuelsmth@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-02-24regulator: axp20x: Fix misleading use of negationOndrej Jirman
It works incidentally, because AXP20X_DCDC2_LDO3_V_RAMP_DCDC2_EN is non-zero, but the false branch value really should be just 0. Signed-off-by: Ondrej Jirman <megous@megous.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/r/20200222235634.243805-1-megous@megous.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-02-17regulator: mp5416: Fix output discharge enable bit for LDOsAxel Lin
The .active_discharge_on/.active_discharge_mask settings does not match the datasheet, fix it. Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20200212150223.20042-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-02-12regulator: da9062: Replace zero-length array with flexible-array memberGustavo A. R. Silva
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertenly introduced[3] to the codebase from now on. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Link: https://lore.kernel.org/r/20200211234612.GA28682@embeddedor Signed-off-by: Mark Brown <broonie@kernel.org>
2020-02-12regulator: da9063: Replace zero-length array with flexible-array memberGustavo A. R. Silva
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertenly introduced[3] to the codebase from now on. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Link: https://lore.kernel.org/r/20200211234710.GA29532@embeddedor Signed-off-by: Mark Brown <broonie@kernel.org>
2020-02-11regulator: mp5416: add mp5416 regulator driverSaravanan Sekar
Adding regulator driver for the device mp5416. The MP5416 PMIC device contains four DC-DC buck converters and five regulators, accessed over I2C. Signed-off-by: Saravanan Sekar <sravanhome@gmail.com> Link: https://lore.kernel.org/r/20200204110419.25933-3-sravanhome@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-02-11regulator: da9063: remove redundant return statementRishi Gupta
The devm_request_threaded_irq() already returns 0 on success and negative error code on failure. So return from this itself can be used while preserving error log in case of failure. Signed-off-by: Rishi Gupta <gupt21@gmail.com> Link: https://lore.kernel.org/r/1580996996-28798-1-git-send-email-gupt21@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-02-11regulator: da9063: fix code formatting warnings and errorsRishi Gupta
This commit fixes following errors & warnings in this driver as reported by checkpatch.pl: - WARNING: Prefer 'unsigned int' to bare use of 'unsigned' - WARNING: line over 80 characters - ERROR: space prohibited before that ',' (ctx:WxW) - ERROR: code indent should use tabs where possible - WARNING: Block comments use * on subsequent lines Signed-off-by: Rishi Gupta <gupt21@gmail.com> Link: https://lore.kernel.org/r/1580996917-28494-1-git-send-email-gupt21@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-02-11regulator: mp8859: add supply entryMarkus Reichl
Add vin_supply to the regulator description to support a nice regulator tree. Signed-off-by: Markus Reichl <m.reichl@fivetechno.de> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20200203110034.1448-1-m.reichl@fivetechno.de Signed-off-by: Mark Brown <broonie@kernel.org>
2020-02-03Merge tag 'mfd-next-5.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Add support for ROHM BD71828 PMICs and GPIOs - Add support for Qualcomm Aqstic Audio Codecs WCD9340 and WCD9341 New Device Support: - Add support for BD71828 to BD70528 RTC driver - Add support for Intel's Jasper Lake to LPSS PCI New Functionality: - Add support for Power Key to ROHM BD71828 - Add support for Clocks to ROHM BD71828 - Add support for GPIOs to Dialog DA9062 - Add support for USB PD Notify to ChromiumOS EC - Allow callers to specify args when requesting regmap lookup; syscon Fix-ups: - Improve error handling and sanity checking; atmel-hlcdc, dln2 - Device Tree support/documentation; bd71828, da9062, xylon,logicvc, ab8500, max14577, atmel-usart - Match devices using platform IDs; bd7xxxx - Refactor BD718x7 regulator component; bd718x7-regulator - Use standard interfaces/helpers; syscon, sm501 - Trivial (whitespace, spelling, etc); ab8500-core, Kconfig - Remove unused code; db8500-prcmu, tqmx86 - Wait until boot has finished before accessing registers; madera-core - Provide missing register value defaults; cs47l15-tables - Allow more time for hardware to reset; madera-core Bug Fixes: - Fix erroneous register values; rohm-bd70528 - Fix register volatility; axp20x, rn5t618 - Fix Kconfig dependencies; MFD_MAX77650 - Fix incorrect compatible string; da9062-core - Fix syscon_regmap_lookup_by_phandle_args() stub; syscon" * tag 'mfd-next-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (41 commits) mfd: syscon: Fix syscon_regmap_lookup_by_phandle_args() dummy mfd: wcd934x: Add support to wcd9340/wcd9341 codec mfd: syscon: Add arguments support for syscon reference mfd: rn5t618: Mark ADC control register volatile dt-bindings: atmel-usart: Add microchip,sam9x60-{usart, dbgu} dt-bindings: atmel-usart: Remove wildcard mfd: cros_ec: Add cros-usbpd-notify subdevice mfd: da9062: Fix watchdog compatible string mfd: madera: Allow more time for hardware reset mfd: cs47l15: Add missing register default mfd: madera: Wait for boot done before accessing any other registers mfd: Kconfig: Rename Samsung to lowercase mfd: tqmx86: remove set but not used variable 'i2c_ien' mfd: dbx500-prcmu: Drop DSI pll clock functions mfd: dbx500-prcmu: Drop set_display_clocks() mfd: max77650: Select REGMAP_IRQ in Kconfig mfd: axp20x: Mark AXP20X_VBUS_IPSOUT_MGMT as volatile mfd: ab8500: Fix ab8500-clk typo mfd: intel-lpss: Add Intel Jasper Lake PCI IDs dt-bindings: mfd: max14577: Add reference to max14040_battery.txt descriptions ...
2020-01-27Merge tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremapLinus Torvalds
Pull ioremap updates from Christoph Hellwig: "Remove the ioremap_nocache API (plus wrappers) that are always identical to ioremap" * tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap: remove ioremap_nocache and devm_ioremap_nocache MIPS: define ioremap_nocache to ioremap
2020-01-24regulator: bd718x7: Split driver to common and bd718x7 specific partsMatti Vaittinen
Few ROHM PMICs allow setting the voltage states for different system states like RUN, IDLE, SUSPEND and LPSR. States are then changed via SoC specific mechanisms. bd718x7 driver implemented device-tree parsing functions for these state specific voltages. The parsing functions can be re-used by other ROHM chip drivers like bd71828. Split the generic functions from bd718x7-regulator.c to rohm-regulator.c and export them for other modules to use. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-01-24mfd: Rohm PMICs: Use platform_device_id to match MFD sub-devicesMatti Vaittinen
Thanks to Stephen Boyd I today learned we can use platform_device_id to do device and module matching for MFD sub-devices! Do device matching using the platform_device_id instead of using explicit module_aliases to load modules and custom parent-data field to do module loading and sub-device matching. Cc: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-01-23Merge remote-tracking branch 'regulator/topic/equal' into regulator-nextMark Brown
2020-01-23Merge branch 'regulator-5.6' into regulator-nextMark Brown
2020-01-23Merge branch 'regulator-5.5' into regulator-linusMark Brown
2020-01-20regulator: core: Fix exported symbols to the exported GPL versionEnric Balletbo i Serra
Change the exported symbols introduced by commit e9153311491da ("regulator: vctrl-regulator: Avoid deadlock getting and setting the voltage") from EXPORT_SYMBOL() to EXPORT_SYMBOL_GPL(), like is used for all the core parts. Fixes: e9153311491da ("regulator: vctrl-regulator: Avoid deadlock getting and setting the voltage") Reported-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Link: https://lore.kernel.org/r/20200120123921.1204339-1-enric.balletbo@collabora.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-17regulator: mpq7920: Fix incorrect definesAxel Lin
Fix defines for MPQ7920_MASK_BUCK_ILIM and MPQ7920_DISCHARGE_ON Remove unused MPQ7920_REG_REGULATOR_EN1. Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20200115002953.14731-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-17regulator: vqmmc-ipq4019: Fix platform_no_drv_owner.cocci warningsYueHaibing
Remove .owner field if calls are used which set it automatically Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20200116023344.163592-1-yuehaibing@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-17regulator: vctrl-regulator: Avoid deadlock getting and setting the voltageEnric Balletbo i Serra
`cat /sys/kernel/debug/regulator/regulator_summary` ends on a deadlock when you have a voltage controlled regulator (vctrl). The problem is that the vctrl_get_voltage() and vctrl_set_voltage() calls the regulator_get_voltage() and regulator_set_voltage() and that will try to lock again the dependent regulators (the regulator supplying the control voltage). Fix the issue by exporting the unlocked version of the regulator_get_voltage() and regulator_set_voltage() API so drivers that need it, like the voltage controlled regulator driver can use it. Fixes: f8702f9e4aa7 ("regulator: core: Use ww_mutex for regulators locking") Reported-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Link: https://lore.kernel.org/r/20200116094543.2847321-1-enric.balletbo@collabora.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-14regulator: core: Add regulator_is_equal() helperMarek Vasut
Add regulator_is_equal() helper to compare whether two regulators are the same. This is useful for checking whether two separate regulators in a driver are actually the same supply. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Igor Opaniuk <igor.opaniuk@toradex.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Mark Brown <broonie@kernel.org> Cc: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Link: https://lore.kernel.org/r/20191220164450.1395038-1-marex@denx.de Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-14regulator: mpq7920: Convert to use .probe_newAxel Lin
Use the new .probe_new instead. Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20200114124449.28408-2-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-14regulator: mpq7920: Remove unneeded fields from struct mpq7920_regulator_infoAxel Lin
Both *dev and *rdev are only used in .probe, so use local variable instead. Also remove mpq7920_regulator_register() because it is so trivial and there is only one caller. Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20200114124449.28408-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-14regulator: vqmmc-ipq4019: Trivial clean upAxel Lin
A few trivial clean up: * Make ipq4019_regulator_voltage_ops and vmmc_regulator const * Make ipq4019_vmmcq_regmap_config static * Use regulator_map_voltage_ascend Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20200114065847.31667-2-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-14regulator: vqmmc-ipq4019: Remove ipq4019_regulator_removeAxel Lin
This driver is using devm_regulator_register() so no need to call regulator_unregister() in ipq4019_regulator_remove(). Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20200114065847.31667-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-13regulator: bd718x7: Simplify the code by removing struct bd718xx_pmic_initsAxel Lin
Nowdays ROHM_CHIP_TYPE_AMOUNT includes not only BD71837/BD71847 but also BD70528/BD71828 which are not supported by this driver. So it seems not necessay to have pmic_regulators[ROHM_CHIP_TYPE_AMOUNT] as mapping table. Simplify the code by removing struct bd718xx_pmic_inits and pmic_regulators[ROHM_CHIP_TYPE_AMOUNT]. Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20200108014256.11282-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-13regulator: add IPQ4019 SDHCI VQMMC LDO driverRobert Marko
This introduces the IPQ4019 VQMMC LDO driver needed for the SD/EMMC driver I/O level operation. This will enable introducing SD/EMMC support for the built-in controller. Signed-off-by: Mantas Pucka <mantas@8devices.com> Signed-off-by: Robert Marko <robert.marko@sartura.hr> Link: https://lore.kernel.org/r/20200112113003.11110-1-robert.marko@sartura.hr Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-13regulator: Convert i2c drivers to use .probe_newAxel Lin
Use the new .probe_new for i2c drivers. These drivers do not use const struct i2c_device_id * argument, so convert them to utilise the simplified i2c driver registration. Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20200109155808.22003-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-13regulator: mpq7920: Check the correct variable in mpq7920_regulator_register()Dan Carpenter
There is a typo in the error checking. We should be checking "->rdev[i]" instead of just "->rdev". Fixes: 6501c1f54a17 ("regulator: mpq7920: add mpq7920 regulator driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20200113125805.xri6jqoxy2ldzqyg@kili.mountain Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-10regulator: mpq7920: Fix Woverflow warning on conversionSaravanan Sekar
Fix warning Woverflow on type conversion reported on x86. Fixes: 6501c1f54a17 (regulator: mpq7920: add mpq7920 regulator driver) Signed-off-by: Saravanan Sekar <sravanhome@gmail.com> Link: https://lore.kernel.org/r/20200110102220.7163-1-sravanhome@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-10regulator: mp8859: tidy up white space in probeDan Carpenter
These two lines are indented an extra tab. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20200110055252.rvelu4ysvoxsbmlg@kili.mountain Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-09regulator: mpq7920: add mpq7920 regulator driverSaravanan Sekar
Adding regulator driver for the device mpq7920. The MPQ7920 PMIC device contains four DC-DC buck converters and five regulators, is designed for automotive and accessed over I2C. Fixed sparse warning reported on this patch Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Saravanan Sekar <sravanhome@gmail.com> Link: https://lore.kernel.org/r/20200109195346.30270-1-sravanhome@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-08regulator: mp8859: add config option and build entryMarkus Reichl
Add entries for the mp8859 regulator driver to the build system. Signed-off-by: Markus Reichl <m.reichl@fivetechno.de> Link: https://lore.kernel.org/r/20200106211633.2882-3-m.reichl@fivetechno.de Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-07regulator: mp8859: add driverMarkus Reichl
The MP8859 from Monolithic Power Systems is a single output DC/DC converter. The voltage can be controlled via I2C. Signed-off-by: Markus Reichl <m.reichl@fivetechno.de> Link: https://lore.kernel.org/r/20200106211633.2882-2-m.reichl@fivetechno.de Signed-off-by: Mark Brown <broonie@kernel.org>