summaryrefslogtreecommitdiff
path: root/drivers/regulator/twl-regulator.c
AgeCommit message (Collapse)Author
2011-05-27REGULATOR: TWL6025: add support to twl-regulatorGraeme Gregory
Adding support for the twl6025. Major difference in the twl6025 is the group functionality has been removed from the chip so this affects how regulators are enabled and disabled. The names of the regulators also changed. The DCDCs of the 6025 are software controllable as well. Since V1 Use the features variable passed via platform data instead of calling global function. Change the very switch like if statements to be a more readable switch statement. Since V2 twl6025 doesn't use remap so remove it from the macros. Since V3 enable/disable functions for 4030/6030 were seperated upstream so rebase on top of this. Change DCDC reference to SMPS as this is used in TRM. Change list_voltage slightly to have less code. Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-05-27regulator: twl6030: do not write to _GRP for regulator disableBalaji T K
TWL6030: regulator is disabled via VREG_STATE TWL4030: regulator is disabled via VREG_GRP Since there is nothing common, split twlreg_enable similar to other regulator_ops Signed-off-by: Balaji T K <balajitk@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-05-27regulator: twl6030: do not write to _GRP for regulator enableBalaji T K
TWL6030: regulator is enabled via VREG_STATE TWL4030: regulator is enabled via VREG_GRP Since there is nothing common, split twlreg_enable similar to other regulator_ops Signed-off-by: Balaji T K <balajitk@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-05-27regulator: twl: add twl6030 set_modeSaquib Herman
Current set_mode logic does not support 6030. The logic for 4030 is not reusable for 6030 as the mode setting for 6030 now uses the new CFG_STATE register. We hence rename the old get_status as being specific to 4030. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Saquib Herman <saquib@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@vega.(none)>
2011-05-27regulator: twl: add twl6030 get_statusSaquib Herman
Current get_status logic does not support 6030 get_status. The logic for 4030 is not reusable for 6030 as the status check for 6030 now depends on the new CFG_STATE register. We hence rename the old get_status as being specific to 4030 and remove the redundant check for the same. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Saquib Herman <saquib@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@vega.(none)>
2011-05-27regulator: twl: fix twl6030 regulator is_enabledSaquib Herman
With TWL6030, it is not enough to ensure that the regulator is the group of P1 group (CPU/Linux), but we need to check the state as far as APP is concerned as well. Split the current is_enabled to 6030 and 4030 specific ones. This split impacts few macros and variables as well, but sets up the stage for further fixes to set_mode and get_status in subsequent patches. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Saquib Herman <saquib@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@vega.(none)>
2011-05-27regulator: twl: remap has no meaning for 6030Saquib Herman
TWL6030 does not have remap register. The current implementation causes value of remap to be written to state register, accidentally causing the regulators which are probed to be switched on as well. This is wrong as regulators should be controllable based on calls to enable/disable for TWL regulator framework. Further, the values initialized make no sense as well. We hence remove this from the initalizers and also write to remap register only if the TWL is 4030. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Saquib Herman <saquib@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@vega.(none)>
2011-05-27regulator: twl: fix twl6030 enable/disableSaquib Herman
TWL6030 requires an additional register write to CFG_STATE register to explicitly state that the regulator is in a certain state. Merely associating the regulator with the group is not enough. Add the required register field definitions and fix the handling for TWL6030 enable/disable. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Saquib Herman <saquib@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@vega.(none)>
2011-03-23regulator: twl: add clk32kg to twl-regulatorBalaji T K
In OMAP4 Blaze and Panda, 32KHz clock to WLAN is supplied from Phoenix TWL6030. The 32KHz clock state (ON/OFF) is configured in CLK32KG_CFG_[GRP, TRANS, STATE] register. This follows the same register programming model as other regulators in TWL6030. So add CLK32KG as pseudo regulator. Signed-off-by: Balaji T K <balajitk@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-12regulator: Report actual configured voltage to set_voltage()Mark Brown
Change the interface used by set_voltage() to report the selected value to the regulator core in terms of a selector used by list_voltage(). This allows the regulator core to know the voltage that was chosen without having to do an explict get_voltage(), which would be much more expensive as it will generally access hardware. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-11-30regulator: twl-regulator - fix twlreg_set_modeAxel Lin
The Singular Message is 16 bits: DEV_GRP[15:13] MT[12] RES_ID[11:4] RES_STATE[3:0] Current implementation return immedially after sucessfuly write MSB part. To properly set mode, we need to write the complete message ( MSB and LSB ). In twl.h, now we have defines for PM Master module register offsets, use it instead of hard coded 0x15/0x16. Use "message & 0xff" to ensure we send correct value for LSB. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Lesly Arackal Manuel <leslyam@ti.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-05-25twl6030: regulator: Remove vsel tables and use formula for calculationRajendra Nayak
All twl6030 regulators can be programmed from 1.0v to 3.3v with 100mV steps. The below formula can be used to calculate the vsel values to be programmed in the VREG_VOLTAGE registers. Voltage(in mV) = 1000mv + 100mv * (vsel - 1) Ex: if vsel = 0x9, mV = 1000 + 100 * (9 -1) = 1800mV. This patch removes all existing VSEL tables for twl6030 adjustable regulators and just uses the formula directly for vsel calculations after verifing they fall in the allowed range. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-03Regulators: twl-regulator - mark probe function as __devinitDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-03twl6030: regulator: Configure STATE register instead of REMAPRajendra Nayak
This is no REMAP register on twl6030, instead there is a STATE register to drive a resource to a given state. The state register can be used to specify what state the resource should enter when its associated with a GRP. Register Bit field description is as below. The patch programmes the corresponding STATE registers for all LDO's to turn ON when assocaited with GRP_P1. STATE REG: Bit7 |Bit6 |Bit5 |Bit4 |Bit3 |Bit2 |Bit1 |Bit0 P3_GRP |P2_GRP |P1_GRP |RES |RES |RES |State1 |State0 State can be specified as below 00: OFF 01: ON 10: OFF 11: SLEEP Signed-off-by: Rajendra Nayak <rnayak@ti.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-12-17twl-regulator: Fix reg_disable functionality for 4030 and 6030Juha Keski-Saari
This change makes sure all regulator group assignments are cleared on disable call Signed-off-by: Juha Keski-Saari <ext-juha.1.keski-saari@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-12-17twl-regulator: Add turnon delay to reg_enableJuha Keski-Saari
This change implements a basic turnon delay in the regulator enable function to make it less probable that reg_enable returns before the regulator output is at target level Signed-off-by: Juha Keski-Saari <ext-juha.1.keski-saari@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-12-17twl-regulator: Restore REMAP configuration in regulator probeJuha Keski-Saari
This change ensures the regulator REMAP register configuration is in a known state so state transitions will function as intended regardless of possible bootloader effects on it Signed-off-by: Juha Keski-Saari <ext-juha.1.keski-saari@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-12-17twl-regulator: Add turnon-delay and REMAP config to twlreg_info structJuha Keski-Saari
This change includes regulator turnon delay values and the REMAP reset configuration to the twlreg_info struct, since they are basic attributes of every TWL regulator Signed-off-by: Juha Keski-Saari <ext-juha.1.keski-saari@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-12-17twl-regulator: Define critical regulators as always_onJuha Keski-Saari
Defines VIO, VDD1, VDD2, VPLL1 and VINT* regulators as always_on by default since they are critical to TWL and its master's functionality and should be on in all cases where RegFW is used Signed-off-by: Juha Keski-Saari <ext-juha.1.keski-saari@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-12-17twl-regulator: Add all twl4030 regulators to twlreg_infoJuha Keski-Saari
Define all twl4030 regulators in the twlreg_info table, along with appropriate VSEL tables for adjustable regulators Signed-off-by: Juha Keski-Saari <ext-juha.1.keski-saari@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-12-14regulator: Add support for twl6030 regulatorsRajendra Nayak
This patch updates the regulator driver to add support for TWL6030 PMIC specific LDO regulators. SMPS resources are not yet supported for TWL6030 and also .set_mode and .get_status for LDO's are yet to be implemented for TWL6030. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Balaji T K <balajitk@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Rename twl4030_ routines in twl-regulator.cRajendra Nayak
This patch renames all twl4030_ functions to twl so that regulator driver can be reused by Triton - TWL4030 and Phoenix - TWL6030. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Rename all twl4030_i2c*Balaji T K
This patch renames function names like twl4030_i2c_write_u8, twl4030_i2c_read_u8 to twl_i2c_write_u8, twl_i2c_read_u8 and also common variable in twl-core.c Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Rename twl4030* driver files to enable re-useSantosh Shilimkar
The upcoming TWL6030 is companion chip for OMAP4 like the current TWL4030 for OMAP3. The common modules like RTC, Regulator creates opportunity to re-use the most of the code from twl4030. This patch renames few common drivers twl4030* files to twl* to enable the code re-use. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>