summaryrefslogtreecommitdiff
path: root/drivers/regulator/tps62360-regulator.c
AgeCommit message (Collapse)Author
2020-09-01regulator: tps62360: Constify tps62360_dcdc_opsRikard Falkeborn
The only usage of tps62360_dcdc_ops is to assign its address to the ops field in the regulator_desc struct, which is a const pointer. Make it const to allow the compiler to put it in read-only memory. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lore.kernel.org/r/20200829221104.20870-4-rikard.falkeborn@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-14regulator: drivers: Drop owner assignment from i2c_driverKrzysztof Kozlowski
i2c_driver does not need to set an owner because i2c_register_driver() will set it. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-26regulator: of: Add regulator desc param to of_get_regulator_init_data()Javier Martinez Canillas
The of_get_regulator_init_data() function is used to extract the regulator init_data but information on how to extract certain data is defined in the static regulator descriptor (e.g: how to map the hardware operating modes). Add a const struct regulator_desc * parameter to the function signature so the parsing logic could use the information in the struct regulator_desc. of_get_regulator_init_data() relies on of_get_regulation_constraints() to actually extract the init_data so it has to pass the struct regulator_desc but that is modified on a later patch. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-02-20regulator: tps62360: Remove redundant error messageSachin Kamat
kzalloc prints its own OOM message upon failure. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-06regulator: tps62360: Fix up a pointer-integer size mismatch warningDavid Howells
Fix up the following pointer-integer size mismatch warning in tps62360_probe(): drivers/regulator/tps62360-regulator.c: In function 'tps62360_probe': drivers/regulator/tps62360-regulator.c:363:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] chip_id = (int)match->data; ^ Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-17regulator: tps62360: Use devm_regulator_registerSachin Kamat
devm_* simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30regulator: use dev_get_platdata()Jingoo Han
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-18regulator: tps62360: Fix crash in i2c_driver .probeTuomas Tynkkynen
Commit "i2c: core: make it possible to match a pure device tree driver" changed semantics of the i2c probing for device tree devices. Device tree probed devices now get a NULL i2c_device_id pointer. This caused kernel panics due to NULL dereference. Tested-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-04-23regulator: tps62360: Fix off-by-one shift for ramp_ctrlAxel Lin
According to the datasheet[1] Register 0x06h Description: RmpCtrl (REGISTER ADDRESS: 0x06h Read/Write) BIT[5..7]: RMP[2:0] Output voltage ramp timing D7-D5 Slope 000 32mV/us 001 16mV/us 010 8mV/us ... 110 0.5mV/us 111 0.25mV/us Thus to get correct ramp_ctrl value, we need to right-shift 5 bits. [1] http://www.ti.com/lit/ds/symlink/tps62360.pdf Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-20regulator: remove use of __devexitBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-20regulator: remove use of __devinitBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-20regulator: remove use of __devexit_pBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-15regulator: tps62360: use devm_* for gpio requestLaxman Dewangan
Use devm_ version of gpio APIs gpio_request_one() for requesting gpios. This avoid extra code for freeing gpios. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-02regulator: tps62360: Convert to regulator_set_voltage_time_sel()Axel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-23regulator: tps62360: Remove chip_id and voltage_base from struct tps62360_chipAxel Lin
The chip_id is not used. The voltage_base is not necessary, set base voltage to tps->desc.min_uV instead. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-17regulator: tps62360: Simplify tps62360_set_voltage_time_sel implementationAxel Lin
For linear mappings, we can use below equation to get the voltage difference between new_selector and old_selector: abs(new_selector - old_selector) * rdev->desc->uV_step Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-20regulator: tps62360: dt: initialize of_node param for regulator register.Laxman Dewangan
Initialize config.of_node for regulator before registering. This is needed for DT based regulator support. Regulator stores this of_node value in rdev->dev.of_node and used for lookup when client ask for regulator_get(). Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-14regulator: tps62360: support force PWM mode via regulator modeLaxman Dewangan
Change the mechanism of enabling the force PWM mode through regulator set mode. This can be dynamically configured now. In the REGULATOR_MODE_FAST the force PWM is enabled and in REGULATOR_MODE_NORMAL the force PWM is disabled. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-14regulator: tps62360: Fix build error due to missing semicolonAxel Lin
Fix below build error: CC [M] drivers/regulator/tps62360-regulator.o drivers/regulator/tps62360-regulator.c:351:1: error: expected ',' or ';' before 'extern' make[2]: *** [drivers/regulator/tps62360-regulator.o] Error 1 make[1]: *** [drivers/regulator] Error 2 make: *** [drivers] Error 2 Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-14regulator: tps62360: Convert to set_voltage_sel and regulator_map_voltage_linearAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-14regulator: tps62360: Convert to regulator_list_voltage_linear()Axel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-13regulator: tps62360: add dt supportLaxman Dewangan
Add dt support for the pmu device tps62360 and Add binding documentation with example. With this patch driver will support both device-tree and non-device tree registration. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-13regulator: tps62360: make init_data of platform data to pointer.Laxman Dewangan
Convert platform data member regulator_init_data to pointer type. This will avoid the copy of entire regualator init data into platform data member when adding dt support and it can be achieve by simple assignment: pdata->init_data = of_get_regulator_init_data(dev, dev->of_node); Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-08regulator: tps62360: fix stylistic issue and optimize codeLaxman Dewangan
Fix multiple stylistic issue like: - The print message should be not break into multiple line. - line gap after variable declaration and statement. - checkpatch error. - some typo. Some enhancement on error message printing to print error value also along with proper text. Avoid voltage_base conversion to microvolts every time. Put init functions in init section. Using efficient function inplace of calling multiple function to reduce the code size. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-07regulator: tps62360: Provide settling time for voltage changeLaxman Dewangan
Settling time is require when there is voltage output change. Implement set_voltage_time_sel() callback which returns delay time for voltage change to settle down to new value. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-07regulator: tps62360: enable register cacheLaxman Dewangan
Enable cache of device register using regmap cache RBTREE. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-23regulator: Remove unneeded include of linux/delay.h from regulator driversAxel Lin
All the drivers that need delay for the regulator voltage output voltage to stabilize after being enabled or after being set to a new value has been converted to implement enable_time and set_voltage_time_sel callbacks. Then regulator core will take care of the necessary delay. For the drivers that don't need the delay, don't need to include linux/delay.h. This patch removes the unneeded include of linux/delay.h in regulator drivers. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-10regulator: tps62360: Convert to devm_regmap_init_i2c()Axel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-09regulator: core: Use a struct to pass in regulator runtime configurationMark Brown
Rather than adding new arguments to regulator_register() every time we want to add a new bit of dynamic information at runtime change the function to take these via a struct. By doing this we avoid needing to do further changes like the recent addition of device tree support which required each regulator driver to be updated to take an additional parameter. The regulator_desc which should (mostly) be static data is still passed separately as most drivers are able to configure this statically at build time. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-02regulator: Add support for tps62362 and tps62363 in tps62360-regulator driverAxel Lin
According to the datasheet[1], tps62360 is register compatible with tps62362. tps62361B is register compatible with tps62363. Thus this patch adds support for tps62362 and tps62363. [1] http://www.ti.com/litv/pdf/slvsau9b Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01regulator: Remove unused name and client fields from struct tps62360_chipAxel Lin
The client field of struct tps62360_chip is not used after converting to regmap. The name field of struct tps62360_chip is not used in this driver. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-11regulator: tps62360: Remove pointless test for unsigned less than zeroAxel Lin
The variable 'selector' is a 'unsigned int', so it can never be less than zero. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20regulator: TPS62360: Add tps62360 regulator driverLaxman Dewangan
The regulator module consists of 1 DCDC. The output voltage is configurable and is meant for supply power to the core voltage of Soc. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 19:39:18 +0000