summaryrefslogtreecommitdiff
path: root/drivers/regulator/rc5t583-regulator.c
AgeCommit message (Collapse)Author
2014-02-20regulator: rc5t583: Remove redundant error messageSachin Kamat
kzalloc prints its own OOM message upon failure. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-11regulator: rc5t583: Allow missing init_data for diagnosticsAxel Lin
The regulator core supports this to allow the configuration to be inspected at runtime even if no software management is enabled. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-17regulator: rc5t583: Use devm_regulator_registerSachin Kamat
devm_* simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-04-16regulator: rc5t583: Remove unused fields from struct rc5t583_regulator_infoAxel Lin
The *dev and *mfd of struct rc5t583_regulator_info are not used after convert to use regmap, remove them. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-20regulator: remove use of __devexitBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-20regulator: remove use of __devinitBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-20regulator: remove use of __devexit_pBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-24regulator: rc5t583: Use regulator_set_voltage_time_sel()Axel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-08regulator: rc5t583: Simplify rc5t583_set_voltage_time_sel implementationAxel Lin
For linear mappings, we can use below equation to get the voltage difference between new_selector and old_selector: abs(new_selector - old_selector) * rdev->desc->uV_step Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-17regulator: rc5t583: Remove max_uV from struct rc5t583_regulator_infoAxel Lin
This driver has been converted to set_voltage_sel and regulator_map_voltage_linear. regulator_map_voltage_linear will check the voltage falls within specified range. The max_uV field is not used now, remove it. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-14regulator: rc5t583: Convert to regulator_set_voltage_sel_regmap and ↵Axel Lin
regulator_map_voltage_linear Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-14regulator: rc5t583: Convert to regulator_list_voltage_linear()Axel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-12Merge remote-tracking branch 'regulator/topic/drivers' into regulator-nextMark Brown
Conflicts: drivers/regulator/88pm8607.c (simple overlap with a bugfix in v3.4)
2012-05-04regulator: rc5t583: Use regulator_get_voltage_sel_regmap()Axel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-23regulator: Remove unneeded include of linux/delay.h from regulator driversAxel Lin
All the drivers that need delay for the regulator voltage output voltage to stabilize after being enabled or after being set to a new value has been converted to implement enable_time and set_voltage_time_sel callbacks. Then regulator core will take care of the necessary delay. For the drivers that don't need the delay, don't need to include linux/delay.h. This patch removes the unneeded include of linux/delay.h in regulator drivers. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-23regulator: rc5t583: Use generic regmap enable/disable operationsAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-09regulator: core: Use a struct to pass in regulator runtime configurationMark Brown
Rather than adding new arguments to regulator_register() every time we want to add a new bit of dynamic information at runtime change the function to take these via a struct. By doing this we avoid needing to do further changes like the recent addition of device tree support which required each regulator driver to be updated to take an additional parameter. The regulator_desc which should (mostly) be static data is still passed separately as most drivers are able to configure this statically at build time. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-06regulator: Convert rc5t583 to set_voltageAxel Lin
Not every regulator driver should implement set_voltage_sel callback. See commit e8eef82 "regulator: Provide a selector based set_voltage_sel() operation". For rc5t583, the regulator voltage can be mapped onto selector values with a simple calculation, thus implement set_voltage is better than set_voltage_sel. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-06regulator: rc5t583: Correct MODULE LICENSE to GPL v2Laxman Dewangan
Fixing build issue reported by Paul Gortmaker: It appears this breaks linux-next allmodconfig build, because it uses an uppercase V in the v2 of its MODULE_LICENSE. FATAL: modpost: GPL-incompatible module rc5t583-regulator.ko uses GPL-only symbol 'platform_driver_unregister' make[2]: *** [__modpost] Error 1 Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-06regulator: rc5t583: Simplify RC5T583_REG macroAxel Lin
Simplify RC5T583_REG macro by removing _vout_reg and _ds_reg parameters. The naming for vout_reg and deepsleep_reg can be replaced by: .vout_reg = RC5T583_REG_##_id##DAC, .deepsleep_reg = RC5T583_REG_##_id##DAC_DS, Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-05regulator: rc5t583: Remove nsteps from struct rc5t583_regulator_infoAxel Lin
The nsteps can be calculated by (_max_mv - _min_mv) * 1000 / _step_uV + 1, thus we can remove _nsteps from RC5T583_REG macro, and then remove nsteps from struct rc5t583_regulator_info. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-05regulator: rc5t583: Fix off-by-one valid range checking for selectorAxel Lin
The valid selector should be 0 ... nsteps-1. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-04regulator: Fix rc5t583_regulator_probe error handlingAxel Lin
1. regulator_register returns ERR_PTR on error, thus use IS_ERR to check the return value. 2. Fix off-by-one for unregistering the registered regulator. Current code does not unregister regs[0].rdev in clean_exit. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-04regulator: Add support for RICOH PMIC RC5T583 regulatorLaxman Dewangan
The RC5T583 PMIC from RICOH consists of 4 DCDC and 10 LDOs. This driver supports the control of different regulator output through regulator interface. This driver depends on MFD driver of RC5T583 and uses mfd rc5t583 apis to communicate to device for accessing different device's registers. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-13 00:57:31 +0000