summaryrefslogtreecommitdiff
path: root/drivers/regulator/qcom_smd-regulator.c
AgeCommit message (Collapse)Author
2020-07-30Merge remote-tracking branch 'regulator/for-5.9' into regulator-nextMark Brown
2020-07-01regulator: qcom_smd: Add MP5496 regulatorsKathiravan T
IPQ6018 SoC uses the PMIC MP5496. SMPA2 and LDOA2 regulator controls the APSS and SDCC voltage scaling respectively. Add support for the same. Signed-off-by: Kathiravan T <kathirav@codeaurora.org> Link: https://lore.kernel.org/r/1592889472-6843-5-git-send-email-kathirav@codeaurora.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-26regulator: qcom_smd-regulator: Remove unused 'struct regulator_desc ↵Lee Jones
pmi8994_boost' This was an upstreaming error. Remove it as it's not to be used. Fixes the following W=1 kernel build warning: drivers/regulator/qcom_smd-regulator.c:477:36: warning: ‘pmi8994_boost’ defined but not used [-Wunused-const-variable=] Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: linux-arm-msm@vger.kernel.org Link: https://lore.kernel.org/r/20200626065738.93412-10-lee.jones@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-23regulator: qcom_smd: Fix pmi8994 labelKonrad Dybcio
s3 was mislabeled as s2. Fix it. Signed-off-by: Konrad Dybcio <konradybcio@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20200620144639.335093-19-konradybcio@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-08regulator: use linear_ranges helperMatti Vaittinen
Change the regulator helpers to use common linear_ranges code. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Mark Brown <broonie@kernel.org> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Link: https://lore.kernel.org/r/64f01d5e381b8631a271616b7790f9d5640974fb.1588944082.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-24regulator: qcom_smd: Add pmi8994 regulator supportBjorn Andersson
The pmi8994 is commonly found on MSM8996 based devices, such as the Dragonboard 820c, where it supplies power to a number of LDOs on the primary PMIC. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20200324041424.518160-1-bjorn.andersson@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-01regulator: qcom_smd: Add PM8950 regulatorsAngelo G. Del Regno
The PM8950 provides 6 SMPS regulators, of which 5 HFSMPS and one FTSMPS2.5 (s5), and 23 LDOs. Add these to the RPM regulator driver. Signed-off-by: Angelo G. Del Regno <kholk11@gmail.com> Link: https://lore.kernel.org/r/20190921095043.62593-4-kholk11@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 and only version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 294 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.825281744@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22regulator: qcom-smd: Batch up requests for disabled regulatorsBjorn Andersson
In some scenarios the early stages of the boot chain has configured regulators to be in a required state, but the later stages has skipped to inform the RPM about it's requirements. But as the SMD RPM regulators are being initialized voltage change requests will be issued to align the voltage with the valid ranges. The RPM aggregates all parameters for the specific regulator, the voltage will be adjusted and the "enabled" state will be "off" - and the regulator is turned off. This patch addresses this problem by caching the requested enable state, voltage and load and send the parameters in a batch, depending on the enable state - effectively delaying the voltage request for disabled regulators. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-20regulator: qcom: Add PMS405 regulatorsBjorn Andersson
The PMS405 provdies 5 SMPS regulators and 13 LDOs, add these to the RPM regulator driver. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-28Merge remote-tracking branch 'regulator/topic/qcom_smd' into regulator-nextMark Brown
2018-03-28regulator: qcom: smd: Add pm8998 and pmi8998 regulatorsBjorn Andersson
Add the pm8998 and pmi8998 regulators as used in the MSM8998 platform. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-22regulator: qcom_smd: Drop regulator/{machine,of_regulator} includesStephen Boyd
These seem to be leftovers from previous developments of the driver but they never got removed. Dropping them still allows the code to compile so everything must be fine. Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-07-07regulator: qcom_smd: add NULL check on of_match_device() return valueGustavo A. R. Silva
Check return value from call to of_match_device() in order to prevent a NULL pointer dereference. In case of NULL print error message and return. Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-19regulator: qcom-smd: Add PM8994 regulator supportRajendra Nayak
This patch adds support for the PM8994 regulators found on msm8992, msm8994 and msm8996 platforms. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> [bjorn: Add DT binding doc and vdd_lvs1_2 supply] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-05regulator: qcom_smd: Fix voltage ranges for pma8084 ftsmps and pldoStephen Boyd
The voltage ranges listed here are wrong. The pma8084 pldo supports three different overlapping voltage ranges with differing step sizes and the pma8084 ftsmps supports two. These ranges can be seen in the "native" spmi regulator driver (qcom_spmi-regulator.c) at pldo_ranges[] and ftsmps_ranges[] respectively. Port these ranges over to the RPM SMD regulator driver so that we list the appropriate set of supported voltages on these types of regulators. Fixes: ee01d0c91ef1 ("regulator: qcom-smd: Add support for PMA8084") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Reviewed-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-05regulator: qcom_smd: Fix voltage ranges for pm8x41Stephen Boyd
The voltage ranges listed here are wrong. The correct ranges can be seen in the "native" spmi regulator driver qcom_spmi-regulator.c at pldo_ranges[], ftsmps_ranges[] and boost_ranges[] for the pldo, ftsmps, and boost type regulators. Port these ranges over to the RPM SMD regulator driver so that we list the appropriate set of supported voltages on pldos. Doing this allows us to specify a voltage like 3075000 for l24, whereas before that wasn't a supported voltage. Fixes: da65e367b67e ("regulator: Regulator driver for the Qualcomm RPM") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Reviewed-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-12regulator: qcom_smd: Avoid overlapping linear voltage rangesStephen Boyd
The pm8x41_hfsmps ranges overlap. The first range is from 375000 to 1562500: 375000 + (95 * 12500) == 1562500 and the second range starts at 1550000. Interestingly, the second range ends at the correct value when it's set to be the appropriate start value, 1575000: 1575000 + ((158 - 96) * 25000) == 3125000 Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Reviewed-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-15regulator: qcom_smd: Remove list_voltage callback for rpm_smps_ldo_ops_fixedAxel Lin
Use regulator_list_voltage_linear_range in rpm_smps_ldo_ops_fixed is wrong because it is used for fixed regulator without any linear range. The rpm_smps_ldo_ops_fixed is used for pm8941_lnldo which has fixed_uV set and n_voltages = 1. In this case, regulator_list_voltage() can return rdev->desc->fixed_uV without .list_voltage implementation. Fixes: 3bfbb4d1a480 ("regulator: qcom_smd: add list_voltage callback") Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-13regulator: qcom_smd: add list_voltage callbackSrinivas Kandagatla
This patch adds support to list_voltage callback, so that consumers like mmc core, can get information of supported voltage range. Without this patch there is no way for mmc core to know this voltage range. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-08regulator: qcom_smd: add regulator ops for pm8941 lnldoSrinivas Kandagatla
After "regulator: qcom_smd: add list_voltage callback" patch adding pm8941 lnldo regulators would bug on list_voltages as it is a fixed regulator without any linear range. This patch fixes that issue by adding dedicated ops for pm8941 lnldo without list_voltages callback. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org # v4.6
2016-06-08regulator: qcom_smd: add list_voltage callbackSrinivas Kandagatla
This patch adds support to list_voltage callback, so that consumers like mmc core, can get information of supported voltage range. Without this patch there is no way for mmc core to know this voltage range. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org # v4.6
2015-12-16regulator: qcom-smd: Add support for PMA8084Andy Gross
This patch adds support and documentation for the PMA8084 regulators found on APQ8084 platforms. Signed-off-by: Andy Gross <agross@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-16regulator: qcom-smd: Add PM8916 supportAndy Gross
This patch adds support and documentation for the PM8916 regulators found on MSM8916 platforms. Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-22regulator: qcom-smd: Correct set_load() unitBjorn Andersson
The set_load() op deals with uA while the SMD packets used mA, so convert as we're building the packet. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-03regulator: qcom_smd: Handle big endian CPUsStephen Boyd
The smd rpm structures are always in little endian, but this driver is not capable of being used on big endian CPUs. Annotate the little endian data members and update the code to do the proper byte swapping. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-19regulator: qcom_smd: Set n_voltages for pm8941_lnldoAxel Lin
Just setting fixed_uV is not enough, the regulator core will also check n_voltages setting. The fixed_uV only works when n_voltages is 1. Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-17regulator: Regulator driver for the Qualcomm RPMBjorn Andersson
Driver for regulators exposed by the Resource Power Manager (RPM) found in devices based on Qualcomm 8974 and newer platforms. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Acked-by: Andy Gross <agross@codeaurora.org> Tested-by: Tim Bird <tim.bird@sonymobile.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 21:38:56 +0000