summaryrefslogtreecommitdiff
path: root/drivers/regulator/da9063-regulator.c
AgeCommit message (Collapse)Author
2019-10-01regulator: da9063: Simplify da9063_buck_set_mode for BUCK_MODE_MANUAL caseAxel Lin
The sleep flag bit decides the mode for BUCK_MODE_MANUAL case, simplify the logic as the result is the same. Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Link: https://lore.kernel.org/r/20190926055128.23434-2-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-02regulator: Remove dev_err() usage after platform_get_irq()Stephen Boyd
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20190730181557.90391-38-swboyd@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-20regulator: da9063: platform_data is gone, depend on OFWolfram Sang
With OF being the only configuration possibility left, depend on it to simplify some code. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Steve Twiss <stwiss.opensource@diasemi.com> Tested-by: Steve Twiss <stwiss.opensource@diasemi.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-20regulator: da9063: move definitions out of a header into the driverWolfram Sang
Those definitions are only used within the driver meanwhile, so put them there. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Steve Twiss <stwiss.opensource@diasemi.com> Tested-by: Steve Twiss <stwiss.opensource@diasemi.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-20regulator: da9063: remove platform_data supportWolfram Sang
There are no in-kernel users anymore, so remove this outdated interface. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Steve Twiss <stwiss.opensource@diasemi.com> Tested-by: Steve Twiss <stwiss.opensource@diasemi.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-03-26regulator: da9063: convert header to SPDXWolfram Sang
Covnert the header of the source file to SPDX. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-03-18regulator: da9063: Convert to use regulator_set/get_current_limit_regmapAxel Lin
Use regulator_set/get_current_limit_regmap helpers to save some code. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Steve Twiss <stwiss@opensource.diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-03-13regulator: da9063: Fix notifier mutex lock warningSteve Twiss
The mutex for the regulator_dev must be controlled by the caller of the regulator_notifier_call_chain(), as described in the comment for that function. Failure to mutex lock and unlock surrounding the notifier call results in a kernel WARN_ON_ONCE() which will dump a backtrace for the regulator_notifier_call_chain() when that function call is first made. The mutex can be controlled using the regulator_lock/unlock() API. Fixes: 69ca3e58d178 ("regulator: da9063: Add Dialog DA9063 voltage regulators support.") Suggested-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-22regulator: da9063: Use struct_size() in devm_kzalloc()Gustavo A. R. Silva
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; struct boo entry[]; }; size = sizeof(struct foo) + count * sizeof(struct boo); instance = alloc(size, GFP_KERNEL) Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = alloc(struct_size(instance, entry, count), GFP_KERNEL) Notice that, in this case, variable size is not necessary, hence it is removed. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-19regulator: da9063: Select maximum current in specific range for ↵Axel Lin
set_current_limit Selecting the minimal value is only true for voltage regulators. For current regulators the maximum in the given range should be selected instead. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-28regulator: da9063: Check return value of devm_regmap_field_alloc callsAxel Lin
Since devm_regmap_field_alloc can fail, add error checking for it. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-04regulator: da9063: Handle less LDOs on DA9063LMarek Vasut
Move the LDOs present only on DA9063 at the end of the list, so that the DA9063L can simply indicate less LDOs and still share the list of regulators with DA9063. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Acked-by: Mark Brown <broonie@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-07-04mfd: da9063: Replace model with typeMarek Vasut
The model number stored in the struct da9063 is the same for all variants of the da9063 since it is the chip ID, which is always the same. Replace that with a separate identifier instead, which allows us to discern the DA9063 variants by setting the type based on either DT match or otherwise. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Acked-by: Mark Brown <broonie@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-07-04mfd: da9063: Rename PMIC_DA9063 to PMIC_CHIP_ID_DA9063Marek Vasut
The PMIC_DA9063 is a complete misnomer, it denotes the value of the DA9063 chip ID register, so rename it as such. It is also the value of chip ID register of DA9063L though, so drop the enum as all the DA9063 "models" share the same chip ID and thus the distinction will have to be made using DT or otherwise. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Acked-by: Mark Brown <broonie@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-06-12treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-30regulator: da9063: Return an error code on probe failureDan Carpenter
If "regl_pdata->n_regulators == 0" is true then we accidentally return PTR_ERR(<some_valid_pointer>) instead of an error code. I've changed it to return -ENODEV instead. Fixes: 69ca3e58d178 ("regulator: da9063: Add Dialog DA9063 voltage regulators support.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-10regulator: da9063: Correct module alias prefix to fix module autoloadingGeert Uytterhoeven
s/paltform/platform/ Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-22regulator: da9*: constify regulator_ops structuresJulia Lawall
The regulator_ops structures are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-14regulator: da9063: Remove unneeded semicolonJavier Martinez Canillas
It's clearly a typo error that just creates a null statement so remove it. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-02regulator: da9063: Fix up irq leakAxel Lin
Current code does not set regulators->irq_ldo_lim and regulators->irq_uvov, so it actually calls free_irq(0, regulators) twice in remove() but does not free the irq actually used. Convert to use devm_request_threaded_irq instead and then we don't need to take care the clean up irq so remove irq_ldo_lim and irq_uvov from struct da9063_regulators. Note, regulators->irq_uvov is not used at all in current code. There is a slightly change in this patch, it will return error in probe() if devm_request_threaded_irq fails. If the irq is optional, it should be fine to allow platform_get_irq_byname fails. But current code does not allow platform_get_irq_byname fails. So I think the reason to allow request irq failure is just because the irq leak. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-14Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-11-21regulator: da9063: Do not transform local IRQ to virtualDmitry Lavnikevich
Call platform_get_irq_byname() already returns VIRQ instead of local IRQ. Passing this value to regmap_irq_get_virq() causes error which results in IRQ registration failure. This patch fixes such behaviour. Signed-off-by: Dmitry Lavnikevich <d.lavnikevich@sam-solutions.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-20regulator: drop owner assignment from platform_driversWolfram Sang
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-03-26Merge remote-tracking branches 'regulator/topic/bcm590xx', ↵Mark Brown
'regulator/topic/da9052', 'regulator/topic/da9055', 'regulator/topic/da9063', 'regulator/topic/da9210', 'regulator/topic/db8500' and 'regulator/topic/dbx500' into regulator-next
2014-03-11regulator: da9063: fix assignment of da9063_reg_matches to NULLColin Ian King
cppcheck detected an incorrect assignment: drivers/regulator/da9063-regulator.c:711]: (warning) Assignment of function parameter has no effect outside the function the original code didn't do anything, instead, *da9063_reg_matches needs to be set to NULL. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-20regulator: da9063: Remove redundant error messageSachin Kamat
kzalloc prints its own OOM message upon failure. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-20regulator: da9063: Do not hardcode return valuesSachin Kamat
Propagate the error values returned by the function instead. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-18regulator: da9063: Add missing of_node_putSachin Kamat
Add of_node_put to decrement the ref count. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-14regulator: da9063: Use of_get_child_by_nameSachin Kamat
of_find_node_by_name walks the allnodes list, and can thus walk outside of the parent node. Use of_get_child_by_name instead. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-12regulator: da9063: Bug fix when setting max voltage on LDOs 5-11Steve Twiss
Bug fix to allow the setting of maximum voltage for certain LDOs. What the bug is: There is a problem caused by an invalid calculation of n_voltages in the driver. This n_voltages value has the potential to be different for each regulator. The value for linear_min_sel is set as DA9063_V##regl_name# which can be different depending upon the regulator. This is chosen according to the following definitions in the DA9063 registers.h file: DA9063_VLDO1_BIAS 0 DA9063_VLDO2_BIAS 0 DA9063_VLDO3_BIAS 0 DA9063_VLDO4_BIAS 0 DA9063_VLDO5_BIAS 2 DA9063_VLDO6_BIAS 2 DA9063_VLDO7_BIAS 2 DA9063_VLDO8_BIAS 2 DA9063_VLDO9_BIAS 3 DA9063_VLDO10_BIAS 2 DA9063_VLDO11_BIAS 2 The calculation for n_voltages is valid for LDOs whose BIAS value is zero but this is not correct for those LDOs which have a non-zero value. What the fix is: In order to take into account the non-zero linear_min_sel value which is set for the regulators LDO5, LDO6, LDO7, LDO8, LDO9, LDO10 and LDO11, the calculation for n_voltages should take into account the missing term defined by DA9063_V##regl_name#. This will in turn allow the core constraints calculation to set the maximum voltage limits correctly and therefore allow users to apply the maximum expected voltage to all of the LDOs. Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2013-10-24Merge remote-tracking branch 'regulator/topic/devm' into regulator-nextMark Brown
2013-10-24Merge remote-tracking branch 'regulator/topic/da9063' into regulator-nextMark Brown
2013-09-30regulator: da9063: use devm_regulator_register()Jingoo Han
Use devm_regulator_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-17regulator: da9063: Add missing initialization of da9063_reg_matchesGeert Uytterhoeven
With gcc 4.1.2: drivers/regulator/da9063-regulator.c: In function ‘da9063_regulator_probe’: drivers/regulator/da9063-regulator.c:847: warning: ‘da9063_reg_matches’ is used uninitialized in this function If the parent device already has platform data, da9063_reg_matches will not be initialized. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-10regulator: da9063: Fix PTR_ERR/ERR_PTR mismatchGeert Uytterhoeven
If CONFIG_OF=n: drivers/regulator/da9063-regulator.c: In function ‘da9063_parse_regulators_dt’: drivers/regulator/da9063-regulator.c:712: warning: passing argument 1 of ‘PTR_ERR’ makes pointer from integer without a cast drivers/regulator/da9063-regulator.c:712: warning: return makes pointer from integer without a cast Use ERR_PTR() to encode an error code in a pointer. PTR_ERR() is meant to decode an error code from a pointer. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-01regulator: da9063: Statize da9063_ldo_lim_eventAxel Lin
da9063_ldo_lim_event() is only referenced in this driver, make it static. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-30regulator: da9063: Use IS_ERR to check return value of regulator_register()Axel Lin
regulator_register() does not return NULL, it returns ERR_PTR on error. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-30regulator: da9063: Optimize da9063_set_current_limit implementationAxel Lin
All the current limit tables have the values in ascend order. So we can slightly optimize the for loop iteration because the first match is the minimal value. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-29regulator: da9063: Add Dialog DA9063 voltage regulators support.Krystian Garbaciak
The driver adds support for the following DA9063 PMIC regulators: - 11x LDOs (named LDO1 - LDO11), - 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI), Regulators provide following operations: - REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators, - REGULATOR_CHANGE_MODE for LDOs and buck converters, where: - LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY, - buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY, - REGULATOR_CHANGE_CURRENT for buck converters (current limits). The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8 and LDO11. Internally, PMIC provides two voltage configurations for normal and suspend system state for each regulator. The driver switches between those on suspend/wake-up to provide quick and fluent output voltage change. This driver requires MFD core driver for operation. Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>