summaryrefslogtreecommitdiff
path: root/drivers/regulator/Makefile
AgeCommit message (Collapse)Author
2014-01-23Merge remote-tracking branches 'regulator/topic/db8500', ↵Mark Brown
'regulator/topic/gpio', 'regulator/topic/lp3971', 'regulator/topic/lp3972', 'regulator/topic/max14577', 'regulator/topic/max77693', 'regulator/topic/mc13892', 'regulator/topic/pcf50633' and 'regulator/topic/pfuze100' into regulator-linus
2013-12-24regulator: act8865: add PMIC act8865 driverWenyou Yang
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-18regulator: max14577: Add regulator driver for Maxim 14577Krzysztof Kozlowski
MAX14577 chip is a multi-function device which includes MUIC, charger and voltage regulator. The driver is located in drivers/mfd. This patch adds regulator driver for MAX14577 chip. There are two regulators in this chip: 1. Safeout LDO with constant voltage output of 4.9V. It can be only enabled or disabled. 2. Current regulator for the charger. It provides current from 90mA up to 950mA. Driver supports Device Tree. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-24Merge remote-tracking branch 'regulator/topic/stw481x' into regulator-nextMark Brown
2013-10-24Merge remote-tracking branch 'regulator/topic/as3722' into regulator-nextMark Brown
2013-09-20regulator: as3722: add regulator driver for AMS AS3722Laxman Dewangan
The AMS AS3722 is a compact system PMU suitable for mobile phones, tablets etc. It has 4 DCDC step down regulators, 3 DCDC step down controller, 11 LDOs. Add a driver to support accessing the DCDC/LDOs found on the AMS AS3722 PMIC using regulators. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Florian Lobmaier <florian.lobmaier@ams.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-17regulator: add STw481x VMMC driverLinus Walleij
The ST Microelectronics STw481x PMIC used for the Nomadik has one single software-controlled regulator for VMMC. This driver registers directly to the compatible string as there is just one regulator. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-17regulator: core: Split devres code out into a separate fileMark Brown
Cut down on the size of core.c a bit more and ensure that the devres versions of things don't do too much peering inside the internals of the APIs they wrap. Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-01Merge remote-tracking branch 'regulator/topic/pfuze100' into regulator-nextMark Brown
2013-09-01Merge remote-tracking branch 'regulator/topic/helpers' into regulator-nextMark Brown
2013-09-01Merge remote-tracking branch 'regulator/topic/da9063' into regulator-nextMark Brown
2013-08-29regulator: da9063: Add Dialog DA9063 voltage regulators support.Krystian Garbaciak
The driver adds support for the following DA9063 PMIC regulators: - 11x LDOs (named LDO1 - LDO11), - 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI), Regulators provide following operations: - REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators, - REGULATOR_CHANGE_MODE for LDOs and buck converters, where: - LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY, - buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY, - REGULATOR_CHANGE_CURRENT for buck converters (current limits). The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8 and LDO11. Internally, PMIC provides two voltage configurations for normal and suspend system state for each regulator. The driver switches between those on suspend/wake-up to provide quick and fluent output voltage change. This driver requires MFD core driver for operation. Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-07regulator: core: Move helpers for drivers out into a separate fileMark Brown
Reduce the size of core.c a bit. Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-06regulator: da9210: New driverSteve Twiss
I2C driver for the Dialog DA9210 Multi-phase 12A DC-DC Buck. Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: David Dajun Chen <david.chen@diasemi.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-25regulator: pfuze100: add pfuze100 regulator driverRobin Gong
Add pfuze100 regulator driver. Signed-off-by: Robin Gong <b38343@freescale.com> Tested-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-19regulator: 88pm800: add regulator driver for 88pm800Chao Xie
Add the regulator driver for PMIC 88pm800 including device tree support. 88pm800 is an I2C-based power-management IC containing voltage regulators, a real-time clock, and some general purpose ADC devices, Signed-off-by: Yi Zhang <yizhang@marvell.com> Signed-off-by: Chao Xie <chao.xie@marvell.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-18regulator: build: Sort KconfigMark Brown
Reduces merge issues if nothing else. Signed-off-by: Mark Brown <broonie@kernel.org>
2013-07-01Merge remote-tracking branch 'regulator/topic/abb' into regulator-nextMark Brown
2013-07-01Merge remote-tracking branch 'regulator/topic/ab8500' into regulator-nextMark Brown
2013-06-25regulator: max77693: Add max77693 regualtor driver.Jonghwa Lee
This patch adds new regulator driver to support max77693 chip's regulators. max77693 has two linear voltage regulators and one current regulator which can be controlled through I2C bus. This driver also supports device tree. Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-07regulator: ab8500: Ensure AB8500 external registers are probed firstLee Jones
This patch changes the order in which the AB8500 regulator drivers are registered and subsequently probed. It saves a lot of -EPROBE_DEFEER nonsense and bootlog noise, as some AB8500 core regulators depend on the external ones for supply voltage. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-05-12regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driverAndrii.Tseglytskyi
Adaptive Body Biasing (ABB) modulates transistor bias voltages dynamically in order to optimize switching speed versus leakage. Texas Instruments' SmartReflex 2 technology provides support for this power management technique with Forward Body Biasing (FBB) and Reverse Body Biasing (RBB). These modulate the body voltage of transistor cells or blocks dynamically to gain performance and reduce leakage. TI's SmartReflex white paper[1] has further information for usage in conjunction with other power management techniques. The application of FBB/RBB technique is determined for each unique device in some process nodes, whereas, they are mandated on other process nodes. In a nutshell, ABB technique is implemented on TI SoC as an on-chip LDO which has ABB module controlling the bias voltage. However, the voltage is unique per device. These vary per SoC family and the manner in which these techniques are used may vary depending on the Operating Performance Point (OPP) voltage targeted. For example: OMAP3630/OMAP4430: certain OPPs mandate usage of FBB independent of devices. OMAP4460/OMAP4470: certain OPPs mandate usage of FBB, while others may optionally use FBB or optimization with RBB. OMAP5: ALL OPPs may optionally use ABB, and ABB biasing voltage is influenced by vset fused in s/w and requiring s/w override of default values. Further, two generations of ABB module are used in various TI SoCs. They have remained mostly register field compatible, however the register offset had switched between versions. We introduce ABB LDO support in the form of a regulator which is controlled by voltages denoting the desired Operating Performance Point which is targeted. However, since ABB transition is part of OPP change sequence, the sequencing required to ensure sane operation w.r.t OPP change is left to the controlling driver (example: cpufreq SoC driver) using standard regulator operations. The driver supports all ABB modes and ability to override ABB LDO vset control efuse based ABB mode detection etc. Current implementation is heavily influenced by the original patch series [2][3] from Mike Turquette. However, the current implementation supports only device tree based information. [1] http://www.ti.com/pdfs/wtbu/smartreflex_whitepaper.pdf [2] http://marc.info/?l=linux-omap&m=134931341818379&w=2 [3] http://marc.info/?l=linux-arm-kernel&m=134931402406853&w=2 [nm@ti.com: co-developer] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-29regulator: ab8500-ext: New driver to control external regulatorsLee Jones
The ABx500 is capable of controlling three external regulator supplies. Most commonly on and off are supported, but if an external regulator chipset or power supply supports high-power and low-power mode settings, we can control those too. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-24regulator: lp8755: new driver for LP8755Daniel Jeong
This patch is for new lp8755 regulator dirver and several unsed variables were deleted and then test was done. LP8755 : The LP8755 is a high performance power management unit.It contains six step-down DC-DC converters which can can be filexibly bundled together in multiphase converters as required by application. www.ti.com Signed-off-by: Daniel Jeong <gshark.jeong@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-10Merge remote-tracking branch 'regulator/topic/max8973' into regulator-nextMark Brown
2012-12-10Merge remote-tracking branch 'regulator/topic/hotplug' into regulator-nextMark Brown
2012-12-10Merge remote-tracking branch 'regulator/topic/da9055' into regulator-nextMark Brown
2012-11-23regulator: add a regulator driver for the AS3711 PMICGuennadi Liakhovetski
This driver supports the 4 DCDC and 8 LDO regulators on the AS3711 PMIC. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-20Merge branches 'topic/tps51632', 'topic/tps80031', 'topic/vexpress', ↵Mark Brown
'topic/max8925', 'topic/gpio' and 'topic/tps65090' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator into regulator-hotplug
2012-11-19regulator: max8973: add regulator driver supportLaxman Dewangan
The MAXIM MAX8973 high-efficiency, three phase, DC-DC step-down switching regulator delievers up to 9A of output current. Each phase operates at a 2MHz fixed frequency with a 120 deg shift from the adjacent phase, allowing the use of small magnetic component. Add regulator driver for this device. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-15regulator: DA9055 regulator driverAshish Jangam
This is the Regulator patch for the DA9055 PMIC and has got dependency on the DA9055 MFD core. This patch support all of the DA9055 regulators. The output voltages are fully programmable through I2C interface only. The platform data with regulation constraints is passed down from the board to the regulator. This patch is functionaly tested on SMDK6410 board. DA9055 Evaluation board was connected to the SMDK6410 board. Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-13regulator: tps80031: add regulator driver for tps80031Laxman Dewangan
Add regulator driver for Texas Instrument TPS80031/TPS80032 device. TPS80031/ TPS80032 Fully Integrated Power Management with Power Path and Battery Charger. It has 5 configurable step-down converters, 11 general purpose LDOs, VBUS generator and digital output to control regulators. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-15regulator: Versatile Express regulator driverPawel Moll
Implementation of the regulator framework driver for the Versatile Express voltage control. Devices without voltage constraints (ie. "regulator-[min|max]-microvolt" properties in the DT node) are treated as fixed (or rather read-only) regulators. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-15regulator: tps51632: Add tps51632 regulator driverLaxman Dewangan
The TPS51632 is a driverless step down controller with serial control. Advanced features such as D-Cap+ architecture with overlapping pulse support and OSR overshoot reduction provide fast transient response, lowest output capacitance and high efficiency. The TPS51632 supports both I2C and DVFS interfaces (through PWM) for dynamic control of the output voltage and current monitor telemetry. Add regulator driver for TPS51632. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-10regulator: Fairchild fan53555 supportYunfan Zhang
This driver supports Fairchild FAN53555 Digitally Programmable TinyBuck Regulator. The FAN53555 is a step-down switching voltage regulator that delivers a digitally programmable output from an input voltage supply of 2.5V to 5.5V. The output voltage is programmed through an I2C interface. Signed-off-by: Yunfan Zhang <yfzhang@marvell.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-28regulator: add MAX8907 driverGyungoh Yoo
The MAX8907 is an I2C-based power-management IC containing voltage regulators, a reset controller, a real-time clock, and a touch-screen controller. The original driver was written by: * Gyungoh Yoo <jack.yoo@maxim-ic.com> Various fixes and enhancements by: * Jin Park <jinyoungp@nvidia.com> * Tom Cherry <tcherry@nvidia.com> * Prashant Gaikwad <pgaikwad@nvidia.com> * Dan Willemsen <dwillemsen@nvidia.com> * Laxman Dewangan <ldewangan@nvidia.com> During upstreaming, I (swarren): * Converted to regmap. * Allowed probing from device tree. * Reworked the regulator driver to be represented as a single device that provides multiple regulators, rather than as a device per regulator. * Replaced many regulator ops with standard functions. * Added ability to specify supplies for each regulator. * Removed the WLED regulator. If/when we expose this in the driver, it should be a backlight object not a regulator object. * Renamed from max8907c->max8907, since the driver covers at least the C and B revisions. * General cleanup. Signed-off-by: Gyungoh Yoo <jack.yoo@maxim-ic.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-20regulator: add new lp8788 regulator driverKim, Milo
TI LP8788 PMU has 4 BUCKS and 22 LDOs. The voltage of BUCK1 and BUCK2 can be controlled by external gpios. And some LDOs also can be enabled by external gpios. The regmap interface is used for regulator operations. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-11regulator: s2mps11: Add samsung s2mps11 regulator driverSangbeom Kim
This patch add Samsung S2MPS11 regulator driver. The S2MPS11 can support 10 Bucks and 38 LDOs and RTC. Especially, S2MPS11 is designed for high performance Samsung application processor. Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-25regulator: Add driver for Arizona LDO1Mark Brown
Arizona class devices feature an integrated LDO which is intended to supply the digital core for the device. Provide a driver offering minimal control of this regulator. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-20regulator: arizona: Add support for microphone supplies on Arizona devicesMark Brown
The Wolfson Arizona platform is used for a range of low power audio hub CODECs. Many of these devices feature an integrated power supply for the microphone which is supported by this driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-19regulator: add new regulator driver for lp872xKim, Milo
This driver supports TI/National LP8720, LP8725 PMIC. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Reviewed-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03regulator: MAX77686: Add Maxim 77686 regulator driverJonghwa Lee
Add driver for support max77686 regulator. MAX77686 provides LDOs[1~26] and BUCKs[1~9]. It support to set or get the volatege of regulator on max77686 chip with using regmap. Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Yadwinder Singh Brar <yadi.brar@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-19regulator: regulator for Palmas KconfigGraeme Gregory
Add the Kconfig/Makefile stuff for the palmas regulator driver Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-04regulator: Add support for RICOH PMIC RC5T583 regulatorLaxman Dewangan
The RC5T583 PMIC from RICOH consists of 4 DCDC and 10 LDOs. This driver supports the control of different regulator output through regulator interface. This driver depends on MFD driver of RC5T583 and uses mfd rc5t583 apis to communicate to device for accessing different device's registers. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-04regulator: gpio-regulator: Sort in MakefileMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01regulator: Add TPS65090 regulator driverVenu Byravarasu
Add TPS65090 regulator driver TPS65090 PMIC from TI consists of 3 step down converters, 2 always on LDOs and 7 current limited load switches. The output voltages are ON/OFF controllable and are meant to supply power to the components on target board. Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-24Merge tag 'regulator-3.4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator into next/drivers The pxa regulator branch removes the bq24022 driver, while a lot of other regulator drivers got added in the regulator tree. This resolves the trivial conflicts by merging in the regulator patches that are already merged into v3.4. Conflicts: drivers/regulator/Kconfig drivers/regulator/Makefile Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-18Merge remote-tracking branch 'regulator/topic/stub' into regulator-nextMark Brown
2012-03-14regulator: Add Anatop regulator driverYing-Chun Liu (PaulLiu)
Anatop is an integrated regulator inside i.MX6 SoC. There are 3 digital regulators which controls PU, CORE (ARM), and SOC. And 3 analog regulators which controls 1P1, 2P5, 3P0 (USB). This patch adds the Anatop regulator driver. Signed-off-by: Nancy Chen <Nancy.Chen@freescale.com> Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Acked-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-11regulator: Sort Kconfig and Makefile entriesAxel Lin
Sort Kconfig entries by company name/driver in alphabetical order. Sort Makefile entries by alphabetical order. In order to group all the Kconfig entries by company name, this patch also adds company name to some Kconfig entries. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 06:27:38 +0000