summaryrefslogtreecommitdiff
path: root/drivers/regulator/Makefile
AgeCommit message (Collapse)Author
2016-05-13Merge remote-tracking branches 'regulator/topic/max77686', ↵Mark Brown
'regulator/topic/max8973', 'regulator/topic/maxim', 'regulator/topic/palmas' and 'regulator/topic/pv88080' into regulator-next
2016-05-11regulator: lp873x: Add support for lp873x PMIC regulatorsKeerthy
The regulators set consists of 2 BUCKs and 2 LDOs. The output voltages are configurable and are meant to supply power to the main processor and other components. The ramp delay is configurable for both BUCKs. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-18regulator: pv88080: new regulator driverJames Ban
This is the driver for the Powerventure PV88080 BUCKs regulator. It communicates via an I2C bus to the device. Signed-off-by: James Ban <James.Ban..opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-28regulator: Rename files for Maxim PMIC driversJavier Martinez Canillas
Most Maxim PMIC regulator drivers are for sub-devices of Multi-Function Devices with drivers under drivers/mfd. But for many of these, the same object file name was used for both the MFD and the regulator drivers. Having 2 different drivers with the same name causes a lot of confusion to Kbuild, specially if these are built as module since only one module will be installed and also exported symbols will be undefined due being overwritten by the other module during modpost. For example, it fixes the following issue when both drivers are module: $ make M=drivers/regulator/ ... CC [M] drivers/regulator//max14577.o Building modules, stage 2. MODPOST 1 modules WARNING: "maxim_charger_calc_reg_current" [drivers/regulator//max14577.ko] undefined! WARNING: "maxim_charger_currents" [drivers/regulator//max14577.ko] undefined! Reported-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-13Merge remote-tracking branches 'regulator/topic/s5m8767' and ↵Mark Brown
'regulator/topic/vexpress' into regulator-next
2016-03-13Merge remote-tracking branches 'regulator/topic/ltc3589', ↵Mark Brown
'regulator/topic/max77620', 'regulator/topic/max77686', 'regulator/topic/max77802' and 'regulator/topic/maxim' into regulator-next
2016-03-13Merge remote-tracking branches 'regulator/topic/discharge', ↵Mark Brown
'regulator/topic/fan53555', 'regulator/topic/gpio', 'regulator/topic/hi655x' and 'regulator/topic/lp872x' into regulator-next
2016-02-20regulator: max77620: add regulator driver for max77620/max20024Laxman Dewangan
MAXIM Semiconductor's PMIC, MAX77620 and MAX20024 have the multiple DCDC and LDOs. This supplies the power to different components of the system. Also these rails has configuration for ramp time, flexible power sequence, slew rate etc. Add regulator driver to access these rails via regulator APIs. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mallikarjun Kasoju <mkasoju@nvidia.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-15regulator: vexpress: rename vexpress regulator implementationSudeep Holla
The vexpress regulator implementation is currently just called vexpress. This is a problem because it clashes with another module with the same name in hardware monitors. This patch renames the vexpress regulator implementation to vexpress-regulator so that there will be no clash in the module namespace. Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Reported-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-15regulator: hi655x: enable regulator for hi655x PMICChen Feng
Add the regulator driver for hi655x PMIC. Signed-off-by: Chen Feng <puck.chen@hisilicon.com> Signed-off-by: Fei Wang <w.f@huawei.com> Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com> Reviewed-by: Haojian Zhuang <haojian.zhuang@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-12regulator: Rename files for max77686 and max77802 driversJavier Martinez Canillas
The max77686 and max77802 regulator drivers are for sub-devices of a MFD driver for some PMIC blocks. But the same object file name (max77686.o) was used for both the common MFD driver and the max77686 regulator one. This confuses kbuild if both drivers are built as module causing the MFD driver to not be copied when installing the modules. Also, max77{686,802} are a quite generic name for MFD subdevices drivers so it is better to rename them to max77{686,802}-regulator like it's the case for most regulator drivers. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-05regulator: act8945a: add regulator driver for ACT8945AWenyou Yang
This patch adds new regulator driver to support ACT8945A MFD chip's regulators. The ACT8945A has three step-down DC/DC converters and four low-dropout regulators. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-12Merge remote-tracking branches 'regulator/topic/pv88090', ↵Mark Brown
'regulator/topic/qcom-smd', 'regulator/topic/tps6105x', 'regulator/topic/tps65086' and 'regulator/topic/tps65218' into regulator-next
2016-01-12Merge remote-tracking branches 'regulator/topic/lp8788', ↵Mark Brown
'regulator/topic/mt6311', 'regulator/topic/optional', 'regulator/topic/palmas' and 'regulator/topic/pv88060' into regulator-next
2015-12-08regulator: pv88090: new regulator driverJames Ban
This is the driver for the Powerventure PV88090 BUCKs and LDOs regulator. It communicates via an I2C bus to the device. Signed-off-by: James Ban <James.Ban.opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-27regulator: add LM363X driverMilo Kim
LM363X regulator driver supports LM3631 and LM3632. LM3631 has 5 regulators. LM3632 provides 3 regulators. One boost output and LDOs are used for the display module. Boost voltage is configurable but always on. Supported operations for LDOs are enabled/disabled and voltage change. Two LDOs of LM3632 can be controlled by external pins. Those are configured through the DT properties. Signed-off-by: Milo Kim <milo.kim@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-20regulator: pv88060: new regulator driverJames Ban
This is the driver for the Powerventure PV88060 BUCKs and LDOs regulator. It communicates via an I2C bus to the device. Signed-off-by: James Ban <James.Ban.opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-16regulator: tps65086: Add regulator driver for the TPS65086 PMICAndrew F. Davis
Add support for TPS65086 PMIC regulators. The regulators set consists of 3 Step-down Controllers, 3 Step-down Converters, 3 LDOs, 3 Load Switches, and a Sink and Source LDO. The output voltages are configurable and are meant to supply power to a SoC and/or other components. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-30Merge remote-tracking branches 'regulator/topic/qcom-smd', ↵Mark Brown
'regulator/topic/qcom-spmi', 'regulator/topic/rk808', 'regulator/topic/stub' and 'regulator/topic/tol' into regulator-next
2015-08-30Merge remote-tracking branches 'regulator/topic/mt6311', ↵Mark Brown
'regulator/topic/ocp', 'regulator/topic/owner', 'regulator/topic/pfuze100' and 'regulator/topic/pwm' into regulator-next
2015-08-17regulator: Regulator driver for the Qualcomm RPMBjorn Andersson
Driver for regulators exposed by the Resource Power Manager (RPM) found in devices based on Qualcomm 8974 and newer platforms. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Acked-by: Andy Gross <agross@codeaurora.org> Tested-by: Tim Bird <tim.bird@sonymobile.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-24regulator: mt6311: Add support for mt6311 regulatorHenry Chen
Add regulator support for mt6311. It has 2 regulaotrs - Buck and LDO, provide the related buck/ldo voltage data to the driver, and creates the regulator_desc table. Supported operations for Buck are enabled/disabled and voltage change, only enabled/disabled for LDO. Signed-off-by: Henry Chen <henryc.chen@mediatek.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-16regulator: Remove the max77843 driverKrzysztof Kozlowski
The max77693 regulator driver supports Maxim 77843 device so remove the max77843 driver. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-22Merge remote-tracking branches 'regulator/topic/of', 'regulator/topic/pwm', ↵Mark Brown
'regulator/topic/qcom' and 'regulator/topic/soft-start' into regulator-next
2015-06-16regulator: Add QCOM SPMI regulator driverStephen Boyd
Add an SPMI regulator driver for Qualcomm's PM8841, PM8941, and PM8916 PMICs. This driver is based largely on code from codeaurora.org[1]. [1] https://www.codeaurora.org/cgit/quic/la/kernel/msm-3.10/tree/drivers/regulator/qpnp-regulator.c?h=msm-3.10 Cc: David Collins <collinsd@codeaurora.org> Cc: <devicetree@vger.kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-21regulator: da9062: DA9062 regulator driverS Twiss
Add BUCK and LDO regulator driver support for DA9062 Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-08Merge remote-tracking branches 'regulator/topic/max8649', ↵Mark Brown
'regulator/topic/mode', 'regulator/topic/mt6397', 'regulator/topic/pfuze100' and 'regulator/topic/qcom-rpm' into regulator-next
2015-02-05regulator: max77843: Add max77843 regulator driverJaewon Kim
This patch adds new regulator driver to support max77843 MFD(Multi Function Device) chip`s regulators. The Max77843 has two voltage regulators for USB safeout. Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com> Signed-off-by: Beomho Seo <beomho.seo@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-24regulator: mt6397: Add support for MT6397 regulatorFlora Fu
Add MT6397 regulator driver. Signed-off-by: Flora Fu <flora.fu@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-14regulator: rt5033: Add RT5033 Regulator device driverBeomho Seo
This patch add device driver of Richtek RT5033 PMIC. The driver support multiple regulator like LDO and synchronous Buck. The integrated synchronous buck converter is designed to provide 0.6 A application with high efficiency. Two LDOs are integrated. One safe LDO is for 60mA and the other one LDO is for 150 mA. Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Beomho Seo <beomho.seo@samsung.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-30Merge remote-tracking branches 'regulator/topic/rk808', ↵Mark Brown
'regulator/topic/rn5t618' and 'regulator/topic/samsung' into regulator-next
2014-09-30Merge remote-tracking branches 'regulator/topic/max1586', ↵Mark Brown
'regulator/topic/max77802' and 'regulator/topic/of' into regulator-next
2014-09-30Merge remote-tracking branches 'regulator/topic/drivers', ↵Mark Brown
'regulator/topic/enable', 'regulator/topic/fan53555', 'regulator/topic/hi6421' and 'regulator/topic/isl9305' into regulator-next
2014-09-28Merge remote-tracking branch 'regulator/topic/sky81452' into regulator-driversMark Brown
Conflicts: drivers/regulator/Kconfig drivers/regulator/Makefile
2014-09-28Merge remote-tracking branch 'regulator/topic/pwm' into regulator-driversMark Brown
Conflicts: drivers/regulator/Kconfig
2014-09-28regulator: pwm-regulator: get voltage and duty table from dtsChris Zhong
rename st-pwm to pwm-regulator. And support getting voltage & duty table from device tree, other platforms can also use this driver without any modify. Signed-off-by: Chris Zhong <zyw@rock-chips.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-24regulator: qcom-rpm: Regulator driver for the Qualcomm RPMBjorn Andersson
Driver for regulators exposed by the Resource Power Manager (RPM) found in Qualcomm 8660, 8960 and 8064 based devices. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-06regulator: isl9305: Add Intersil ISL9305/H driverMark Brown
The ISL9305 and ISL9305H are mini-PMICs offering two DCDC regulators and two LDO regulators. While there are some register differences between them these do not affect the current Linux driver as the relevant features are not yet supported. Signed-off-by: Mark Brown <broonie@kernel.org>
2014-08-30regulator: rn5t618: add driver for Ricoh RN5T618 regulatorsBeniamino Galvani
This driver supports the 3 DCDC and 7 LDO regulators available on Ricoh RN5T618 PMIC. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-08-20regulator: RK808: Add regulator driver for RK808Chris Zhong
The regulator module consists of 4 DCDCs, 8 LDOs and 2 switches. The output voltages are configurable and are meant to supply power to the main processor and other components Signed-off-by: Chris Zhong <zyw@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-18regulator: Add driver for max77802 PMIC PMIC regulatorsJavier Martinez Canillas
The MAX77802 PMIC has 10 high-efficiency Buck and 32 Low-dropout (LDO) regulators. This patch adds support for all these regulators found on the MAX77802 PMIC and is based on a driver added by Simon Glass to the Chrome OS kernel 3.8 tree. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-16regulator: add driver for hi6421 voltage regulatorGuodong Xu
Add driver support for HiSilicon Hi6421 voltage regulators. Two rules for regulator enabling are defined in hi6421 spec: 1) Between disable and enable of each regulator (LDOs or BUCKs), there must be a protection gap. Use @off_on_delay of regulator core to implement this. 2) No two regulators can be enabled at the same time. Use mutex in hi6421_regulator_pdata to ensure this. A protection gap of 100us is added into each LDO/BUCK's .enable_time. Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-16regulator: sky81452: Adding Skyworks SKY81452 regulator driverGyungoh Yoo
Signed-off-by: Gyungoh Yoo <jack.yoo@skyworksinc.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-14regulator: da9211: new regulator driverJames Ban
This is the driver for the Dialog DA9211 Multi-phase 12A DC-DC Buck Converter regulator. It communicates via an I2C bus to the device. Signed-off-by: James Ban <james.ban.opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-02Merge remote-tracking branches 'regulator/topic/fixed', ↵Mark Brown
'regulator/topic/id-const', 'regulator/topic/ltc3589', 'regulator/topic/max8649' and 'regulator/topic/of' into regulator-next
2014-05-26regulator: Add LTC3589 supportPhilipp Zabel
This patch adds support for the Linear Technology LTC3589, LTC3589-1, and LTC3589-2 8-output I2C voltage regulator ICs. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-14regulator: AXP20x: Add support for regulators subsystemCarlo Caione
AXP202 and AXP209 come with two synchronous step-down DC-DCs and five LDOs. This patch introduces basic support for those regulators. Signed-off-by: Carlo Caione <carlo@caione.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-09Merge tag 'mmc-updates-for-3.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC updates from Chris Ball: "MMC highlights for 3.15: Core: - CONFIG_MMC_UNSAFE_RESUME=y is now default behavior - DT bindings for SDHCI UHS, eMMC HS200, high-speed DDR, at 1.8/1.2V - Add GPIO descriptor based slot-gpio card detect API Drivers: - dw_mmc: Refactor SOCFPGA support as a variant inside dw_mmc-pltfm.c - mmci: Support HW busy detection on ux500 - omap: Support MMC_ERASE - omap_hsmmc: Support MMC_PM_KEEP_POWER, MMC_PM_WAKE_SDIO_IRQ, (a)cmd23 - rtsx: Support pre-req/post-req async - sdhci: Add support for Realtek RTS5250 controllers - sdhci-acpi: Add support for 80860F16, fix 80860F14/SDIO card detect - sdhci-msm: Add new driver for Qualcomm SDHCI chipset support - sdhci-pxav3: Add support for Marvell Armada 380 and 385 SoCs" * tag 'mmc-updates-for-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (102 commits) mmc: sdhci-acpi: Intel SDIO has broken card detect mmc: sdhci-pxav3: add support for the Armada 38x SDHCI controller mmc: sdhci-msm: Add platform_execute_tuning implementation mmc: sdhci-msm: Initial support for Qualcomm chipsets mmc: sdhci-msm: Qualcomm SDHCI binding documentation sdhci: only reprogram retuning timer when flag is set mmc: rename ARCH_BCM to ARCH_BCM_MOBILE mmc: sdhci: Allow for irq being shared mmc: sdhci-acpi: Add device id 80860F16 mmc: sdhci-acpi: Fix broken card detect for ACPI HID 80860F14 mmc: slot-gpio: Add GPIO descriptor based CD GPIO API mmc: slot-gpio: Split out CD IRQ request into a separate function mmc: slot-gpio: Record GPIO descriptors instead of GPIO numbers Revert "dts: socfpga: Add support for SD/MMC on the SOCFPGA platform" mmc: sdhci-spear: use generic card detection gpio support mmc: sdhci-spear: remove support for power gpio mmc: sdhci-spear: simplify resource handling mmc: sdhci-spear: fix platform_data usage mmc: sdhci-spear: fix error handling paths for DT mmc: sdhci-bcm-kona: fix build errors when built-in ...
2014-03-26Merge remote-tracking branches 'regulator/topic/tps65218', ↵Mark Brown
'regulator/topic/tps6524x', 'regulator/topic/tps6586x', 'regulator/topic/tps65910', 'regulator/topic/tps80031', 'regulator/topic/wm831x', 'regulator/topic/wm8350' and 'regulator/topic/wm8994' into regulator-next
2014-03-26Merge remote-tracking branches 'regulator/topic/s5m8767', ↵Mark Brown
'regulator/topic/st-pwm', 'regulator/topic/ti-abb', 'regulator/topic/tps51632', 'regulator/topic/tps62360', 'regulator/topic/tps6507x', 'regulator/topic/tps65090' and 'regulator/topic/tps65217' into regulator-next