summaryrefslogtreecommitdiff
path: root/drivers/pwm
AgeCommit message (Collapse)Author
2019-12-05Merge tag 'pwm/for-5.5-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "Various changes and minor fixes across a couple of drivers" * tag 'pwm/for-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: stm32: Pass breakinput instead of its values pwm: stm32: Remove clutter from ternary operator pwm: stm32: Validate breakinput data from DT pwm: Update comment on struct pwm_ops::apply pwm: sun4i: Fix incorrect calculation of duty_cycle/period pwm: stm32: Add power management support pwm: stm32: Split breakinput apply routine to ease PM support dt-bindings: pwm-stm32: Document pinctrl sleep state pwm: sun4i: Drop redundant assignment to variable pval dt-bindings: pwm: mediatek: Remove gratuitous compatible string for MT7629
2019-11-11Merge 5.4-rc7 into staging-nextGreg Kroah-Hartman
We want the staging fixes in here, and it resolves some merge issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-08pwm: bcm-iproc: Prevent unloading the driver module while in useUwe Kleine-König
The owner member of struct pwm_ops must be set to THIS_MODULE to increase the reference count of the module such that the module cannot be removed while its code is in use. Fixes: daa5abc41c80 ("pwm: Add support for Broadcom iProc PWM controller") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-10-21pwm: stm32: Pass breakinput instead of its valuesThierry Reding
Instead of passing the individual values of the breakpoint, pass a pointer to the breakpoint. Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-10-21pwm: stm32: Remove clutter from ternary operatorThierry Reding
Remove usage of the ternary operator to assign values for register fields. Instead, parameterize the register and field offset macros and pass the index to them. This removes clutter and improves readability. Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-10-21pwm: stm32: Validate breakinput data from DTThierry Reding
Both index and level can only be either 0 or 1 and the filter value is limited to values between (and including) 0 and 15. Validate that the device tree node contains values that are within these ranges. Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-10-21pwm: sun4i: Fix incorrect calculation of duty_cycle/periodOndrej Jirman
Since 5.4-rc1, pwm_apply_state calls ->get_state after ->apply if available, and this revealed an issue with integer precision when calculating duty_cycle and period for the currently set state in ->get_state callback. This issue manifested in broken backlight on several Allwinner based devices. Previously this worked, because ->apply updated the passed state directly. Fixes: deb9c462f4e53 ("pwm: sun4i: Don't update the state for the caller of pwm_apply_state") Signed-off-by: Ondrej Jirman <megous@megous.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-10-21pwm: stm32: Add power management supportFabrice Gasnier
Add suspend/resume PM sleep ops. When going to low power, enforce the PWM channel isn't active. Let the PWM consumers disable it during their own suspend sequence, see [1]. So, perform a check here, and handle the pinctrl states. Also restore the break inputs upon resume, as registers content may be lost when going to low power mode. [1] https://lkml.org/lkml/2019/2/5/770 Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-10-21pwm: stm32: Split breakinput apply routine to ease PM supportFabrice Gasnier
Split breakinput routine that configures STM32 timers 'break' safety feature upon probe, into two routines: - stm32_pwm_apply_breakinputs() sets all the break inputs into registers. - stm32_pwm_probe_breakinputs() probes the device tree break input settings before calling stm32_pwm_apply_breakinputs() This is a precursor patch to ease PM support. Registers content may get lost during low power. So, break input settings applied upon probe need to be restored upon resume (e.g. by calling stm32_pwm_apply_breakinputs()). Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-10-21pwm: sun4i: Drop redundant assignment to variable pvalColin Ian King
Variable pval is being assigned a value that is never read. The assignment is redundant and hence can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-10-21Revert "pwm: Let pwm_get_state() return the last implemented state"Thierry Reding
It turns out that commit 01ccf903edd6 ("pwm: Let pwm_get_state() return the last implemented state") causes backlight failures on a number of boards. The reason is that some of the drivers do not write the full state through to the hardware registers, which means that ->get_state() subsequently does not return the correct state. Consumers which rely on pwm_get_state() returning the current state will therefore get confused and subsequently try to program a bad state. Before this change can be made, existing drivers need to be more carefully audited and fixed to behave as the framework expects. Until then, keep the original behaviour of returning the software state that was applied rather than reading the state back from hardware. Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-10-17bus/ti-pwmss: move TI PWMSS driver from PWM to bus subsystemDavid Lechner
The TI PWMSS driver is a simple bus driver for providing power power management for the PWM peripherals on TI AM33xx SoCs, namely eCAP, eHRPWM and eQEP. The eQEP is a counter rather than a PWM, so it does not make sense to have the bus driver in the PWM subsystem since the PWMSS is not exclusive to PWM devices. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-09-27Merge tag 'pwm/for-5.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "Besides one new driver being added for the PWM controller found in various Spreadtrum SoCs, this series of changes brings a slew of, mostly minor, fixes and cleanups for existing drivers, as well as some enhancements to the core code. Lastly, Uwe is added to the PWM subsystem entry of the MAINTAINERS file, making official his role as a reviewer" * tag 'pwm/for-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (34 commits) MAINTAINERS: Add myself as reviewer for the PWM subsystem MAINTAINERS: Add patchwork link for PWM entry MAINTAINERS: Add a selection of PWM related keywords to the PWM entry pwm: mediatek: Add MT7629 compatible string dt-bindings: pwm: Update bindings for MT7629 SoC pwm: mediatek: Update license and switch to SPDX tag pwm: mediatek: Use pwm_mediatek as common prefix pwm: mediatek: Allocate the clks array dynamically pwm: mediatek: Remove the has_clks field pwm: mediatek: Drop the check for of_device_get_match_data() pwm: atmel: Consolidate driver data initialization pwm: atmel: Remove unneeded check for match data pwm: atmel: Remove platform_device_id and use only dt bindings pwm: stm32-lp: Add check in case requested period cannot be achieved pwm: Ensure pwm_apply_state() doesn't modify the state argument pwm: fsl-ftm: Don't update the state for the caller of pwm_apply_state() pwm: sun4i: Don't update the state for the caller of pwm_apply_state() pwm: rockchip: Don't update the state for the caller of pwm_apply_state() pwm: Let pwm_get_state() return the last implemented state pwm: Introduce local struct pwm_chip in pwm_apply_state() ...
2019-09-26pwm: mediatek: Add MT7629 compatible stringSam Shih
This adds pwm support for MT7629, and separate mt7629 compatible string from mt7622 Signed-off-by: Sam Shih <sam.shih@mediatek.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-09-25pwm: mediatek: Update license and switch to SPDX tagSam Shih
Add SPDX identifiers to pwm-mediatek.c. Update MODULE_LICENSE to correctly reflect the GNU General Public License v2.0. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Sam Shih <sam.shih@mediatek.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-09-25pwm: mediatek: Use pwm_mediatek as common prefixSam Shih
Use pwm_mediatek as common prefix to match the filename. No functional change intended. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Sam Shih <sam.shih@mediatek.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-09-25pwm: mediatek: Allocate the clks array dynamicallySam Shih
Instead of using fixed size of arrays, allocate the memory for them based on the number of PWMs specified for each SoC generation. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Sam Shih <sam.shih@mediatek.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-09-25pwm: mediatek: Remove the has_clks fieldSam Shih
We can use fixed clocks to repair mt7628 PWM during configure from userspace. The SoC is legacy MIPS and has no complex clock tree. Because we can get the clock frequency for period calculation from fixed clocks specified in DT, we can remove the has_clock field, and directly use devm_clk_get() and clk_get_rate(). Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Sam Shih <sam.shih@mediatek.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-09-21pwm: mediatek: Drop the check for of_device_get_match_data()Sam Shih
This patch drop the check for of_device_get_match_data. Due to the only way call driver probe is compatible match. The data pointer which points to the SoC specify data is directly set by driver, and it should not be NULL in our case. We can safety remove the check for the result of of_device_get_match_data(). Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Sam Shih <sam.shih@mediatek.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-09-21pwm: atmel: Consolidate driver data initializationThierry Reding
This helps readability by separating the driver-specific bits from the PWM framework bits. Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-09-21pwm: atmel: Remove unneeded check for match dataThierry Reding
Since the driver is now exclusively DT, it only binds if it finds a match in the of_device_id table. But in that case the associated data can never be NULL, so drop the unnecessary check. While at it, drop the extra local variable and store the pointer to this per-SoC data in the driver data directly. Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-09-21pwm: atmel: Remove platform_device_id and use only dt bindingsKamel Bouhara
Since commit 26202873bb51 ("avr32: remove support for AVR32 architecture") there is no more user of platform_device_id and we should only use dt bindings Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-09-21pwm: stm32-lp: Add check in case requested period cannot be achievedFabrice Gasnier
LPTimer can use a 32KHz clock for counting. It depends on clock tree configuration. In such a case, PWM output frequency range is limited. Although unlikely, nothing prevents user from requesting a PWM frequency above counting clock (32KHz for instance): - This causes (prd - 1) = 0xffff to be written in ARR register later in the apply() routine. This results in badly configured PWM period (and also duty_cycle). Add a check to report an error is such a case. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-09-21pwm: Ensure pwm_apply_state() doesn't modify the state argumentUwe Kleine-König
It is surprising for a PWM consumer when the variable holding the requested state is modified by pwm_apply_state(). Consider for example a driver doing: #define PERIOD 5000000 #define DUTY_LITTLE 10 ... struct pwm_state state = { .period = PERIOD, .duty_cycle = DUTY_LITTLE, .polarity = PWM_POLARITY_NORMAL, .enabled = true, }; pwm_apply_state(mypwm, &state); ... state.duty_cycle = PERIOD / 2; pwm_apply_state(mypwm, &state); For sure the second call to pwm_apply_state() should still have state.period = PERIOD and not something the hardware driver chose for a reason that doesn't necessarily apply to the second call. So declare the state argument as a pointer to a const type and adapt all drivers' .apply callbacks. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-09-21pwm: fsl-ftm: Don't update the state for the caller of pwm_apply_state()Uwe Kleine-König
The pwm-fsl-ftm driver is one of only three PWM drivers which updates the state for the caller of pwm_apply_state(). This might have surprising results if the caller reuses the values expecting them to still represent the same state. Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-09-21pwm: sun4i: Don't update the state for the caller of pwm_apply_state()Uwe Kleine-König
The pwm-sun4i driver is one of only three PWM drivers which updates the state for the caller of pwm_apply_state(). This might have surprising results if the caller reuses the values expecting them to still represent the same state. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-09-21pwm: rockchip: Don't update the state for the caller of pwm_apply_state()Uwe Kleine-König
The pwm-rockchip driver is one of only three PWM drivers which updates the state for the caller of pwm_apply_state(). This might have surprising results if the caller reuses the values expecting them to still represent the same state. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-09-21pwm: Let pwm_get_state() return the last implemented stateUwe Kleine-König
When pwm_apply_state() is called the lowlevel driver usually has to apply some rounding because the hardware doesn't support nanosecond resolution. So let pwm_get_state() return the actually implemented state instead of the last applied one if possible. Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-09-21pwm: Introduce local struct pwm_chip in pwm_apply_state()Uwe Kleine-König
pwm->chip is dereferenced several times in the pwm_apply_state() function. Introducing a local variable for it helps keeping some lines a bit shorter. Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-09-21pwm: rockchip: Set polarity unconditionally in .get_state()Uwe Kleine-König
Don't rely on *state being zero initialized and PWM_POLARITY_NORMAL being zero. So always assign .polarity. Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-09-21pwm: bcm2835: Suppress error message during deferred probeStefan Wahren
This suppresses error messages in case the PWM clock isn't ready yet. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-09-21pwm: bcm2835: Fix period_ns range checkStefan Wahren
The range check for period_ns was written under assumption of a fixed PWM clock. With clk-bcm2835 driver the PWM clock is a dynamic one. So fix this by doing the range check on the period register value. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-09-21pwm: bcm2835: Suppress error message for invalid period_nsStefan Wahren
The PWM config can be triggered via sysfs, so we better suppress the error message in case of an invalid period to avoid kernel log spamming. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-09-21pwm: rcar: Remove a redundant condition in rcar_pwm_apply()Yoshihiro Shimoda
Since the rcar_pwm_apply() has already checked whether state->enabled is set or not, this patch removes a redundant condition. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-09-21pwm: sprd: Add Spreadtrum PWM supportBaolin Wang
This patch adds the Spreadtrum PWM support, which provides maximum 4 channels. Signed-off-by: Neo Hou <neo.hou@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-09-21pwm: mediatek: Add MT8516 SoC supportFabien Parent
Add the compatible and the platform data to support PWM on the MT8516 SoC. Signed-off-by: Fabien Parent <fparent@baylibre.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-09-21pwm: Remove dev_err() usage after platform_get_irq()Stephen Boyd
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-pwm@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-09-21pwm: imx: Document known limitationsUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-09-21pwm: jz4740: Document known limitationsUwe Kleine-König
The JZ4740 PWM implementation doesn't fulfill the (up to now insufficiently documented) requirements of the PWM API. At least document them in the driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-09-21pwm: sifive: Remove redundant error messageDing Xiang
devm_ioremap_resource() already outputs an error message, so remove the extra error message on failure. Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-09-21pwm: mxs: Use devm_platform_ioremap_resource() to simplify codeAnson Huang
Use the new helper devm_platform_ioremap_resource() which wraps the platform_get_resource() and devm_ioremap_resource() together, to simplify the code. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-09-19Merge tag 'tag-chrome-platform-for-v5.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform updates from Benson Leung: "CrOS EC / MFD Migration: - Move cros_ec core driver from mfd into chrome platform. Wilco EC: - Add batt_ppid_info command to Wilco telemetry driver. CrOS EC: - cros_ec_rpmsg : Add support to inform EC of suspend/resume status - cros_ec_rpmsg : Fix race condition on probe failed - cros_ec_chardev : Add a poll handler to receive MKBP events Misc: - bugfixes in cros_usbpd_logger and cros_ec_ishtp" * tag 'tag-chrome-platform-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: platform/chrome: cros_usbpd_logger: null check create_singlethread_workqueue platform/chrome: cros_ec_chardev: Add a poll handler to receive MKBP events platform/chrome: cros_ec_rpmsg: Fix race with host command when probe failed platform/chrome: chromeos_tbmc: Report wake events mfd: cros_ec: Use mfd_add_hotplug_devices() helper mfd: cros_ec: Add convenience struct to define autodetectable CrOS EC subdevices mfd: cros_ec: Add convenience struct to define dedicated CrOS EC MCUs mfd: cros_ec: Use kzalloc and cros_ec_cmd_xfer_status helper mfd / platform: cros_ec: Reorganize platform and mfd includes mfd / platform: cros_ec: Rename config to a better name mfd: cros_ec: Switch to use the new cros-ec-chardev driver mfd / platform: cros_ec: Miscellaneous character device to talk with the EC mfd / platform: cros_ec: Move cros-ec core driver out from MFD mfd / platform: cros_ec: Handle chained ECs as platform devices platform/chrome: cros_ec_rpmsg: Add host command AP sleep state support platform/chrome: chromeos_laptop: drop checks of NULL-safe functions platform/chrome: wilco_ec: Add batt_ppid_info command to telemetry driver
2019-09-02mfd / platform: cros_ec: Reorganize platform and mfd includesEnric Balletbo i Serra
There is a bit of mess between cros-ec mfd includes and platform includes. For example, we have a linux/mfd/cros_ec.h include that exports the interface implemented in platform/chrome/cros_ec_proto.c. Or we have a linux/mfd/cros_ec_commands.h file that is non related to the multifunction device (in the sense that is not exporting any function of the mfd device). This causes crossed includes between mfd and platform/chrome subsystems and makes the code difficult to read, apart from creating 'curious' situations where a platform/chrome driver includes a linux/mfd/cros_ec.h file just to get the exported functions that are implemented in another platform/chrome driver. In order to have a better separation on what the cros-ec multifunction driver does and what the cros-ec core provides move and rework the affected includes doing: - Move cros_ec_commands.h to include/linux/platform_data/cros_ec_commands.h - Get rid of the parts that are implemented in the platform/chrome/cros_ec_proto.c driver from include/linux/mfd/cros_ec.h to a new file include/linux/platform_data/cros_ec_proto.h - Update all the drivers with the new includes, so - Drivers that only need to know about the protocol include - linux/platform_data/cros_ec_proto.h - linux/platform_data/cros_ec_commands.h - Drivers that need to know about the cros-ec mfd device also include - linux/mfd/cros_ec.h Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Gwendal Grignou <gwendal@chromium.org> Tested-by: Gwendal Grignou <gwendal@chromium.org> Series changes: 3 - Fix dereferencing pointer to incomplete type 'struct cros_ec_dev' (lkp) Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-09-02mfd / platform: cros_ec: Move cros-ec core driver out from MFDEnric Balletbo i Serra
Now, the ChromeOS EC core driver has nothing related to an MFD device, so move that driver from the MFD subsystem to the platform/chrome subsystem. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Gwendal Grignou <gwendal@chromium.org> Tested-by: Gwendal Grignou <gwendal@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-08-08pwm: Fallback to the static lookup-list when acpi_pwm_get failsHans de Goede
Commit 4a6ef8e37c4d ("pwm: Add support referencing PWMs from ACPI") made pwm_get unconditionally return the acpi_pwm_get return value if the device passed to pwm_get has an ACPI fwnode. But even if the passed in device has an ACPI fwnode, it does not necessarily have the necessary ACPI package defining its pwm bindings, especially since the binding / API of this ACPI package has only been introduced very recently. Up until now X86/ACPI devices which use a separate pwm controller for controlling their LCD screen's backlight brightness have been relying on the static lookup-list to get their pwm. pwm_get unconditionally returning the acpi_pwm_get return value breaks this, breaking backlight control on these devices. This commit fixes this by making pwm_get fall back to the static lookup-list if acpi_pwm_get returns -ENOENT. BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=96571 Reported-by: youling257@gmail.com Fixes: 4a6ef8e37c4d ("pwm: Add support referencing PWMs from ACPI") Cc: Nikolaus Voss <nikolaus.voss@loewensteinmedical.de> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Nikolaus Voss <nikolaus.voss@loewensteinmedical.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-07-09Merge tag 'pwm/for-5.3-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "This set of changes contains a new driver for SiFive SoCs as well as enhancements to the core (device links are used to track dependencies between PWM providers and consumers, support for PWM controllers via ACPI, sysfs will now suspend/resume PWMs that it has claimed) and various existing drivers" * tag 'pwm/for-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (37 commits) pwm: fsl-ftm: Make sure to unlock mutex on failure pwm: fsl-ftm: Use write protection for prescaler & polarity pwm: fsl-ftm: More relaxed permissions for updating period pwm: atmel-hlcdc: Add compatible for SAM9X60 HLCDC's PWM pwm: bcm2835: Improve precision of PWM leds: pwm: Support ACPI via firmware-node framework pwm: Add support referencing PWMs from ACPI pwm: rcar: Remove suspend/resume support pwm: sysfs: Add suspend/resume support pwm: Add power management descriptions pwm: meson: Add documentation to the driver pwm: meson: Add support PWM_POLARITY_INVERSED when disabling pwm: meson: Don't cache struct pwm_state internally pwm: meson: Read the full hardware state in meson_pwm_get_state() pwm: meson: Simplify the calculation of the pre-divider and count pwm: meson: Move pwm_set_chip_data() to meson_pwm_request() pwm: meson: Add the per-channel register offsets and bits in a struct pwm: meson: Add the meson_pwm_channel data to struct meson_pwm pwm: meson: Pass struct pwm_device to meson_pwm_calc() pwm: meson: Don't duplicate the polarity internally ...
2019-06-26pwm: fsl-ftm: Make sure to unlock mutex on failureThierry Reding
Upon failure to enable clocks while trying to enable the PWM, make sure to unlock the mutex that was taken to avoid a deadlock during subsequent operations. Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Julia Lawall <julia.lawall@lip6.fr> Cc: Patrick Havelange <patrick.havelange@essensium.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-26pwm: fsl-ftm: Use write protection for prescaler & polarityPatrick Havelange
Modifying the prescaler or polarity value must be done with the write protection disabled. Currently this is working by chance as the write protection is in a disabled state by default. This patch makes sure that we enable/disable the write protection when needed. Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-26pwm: fsl-ftm: More relaxed permissions for updating periodPatrick Havelange
The Flextimer has only one period for several channels. The PWM subsystem doesn't allow to model something like that. The current implementation simply disallows changing the period once it has been set, having as a side effect that you need to enable and disable the PWM if you want to change the period. The driver should allow as much freedom as possible for configuring the period and duty cycle. Therefore, this patch reworks the code to allow the following: - period and duty_cycle can be set at will when the PWM is disabled; - when enabling a PWM, verify that the period is either not set yet, or the same as the other already enabled PWM(s), and fail if not; - allow to change the period on the fly when the PWM is the only one enabled. It also allows to have different periods configured for different PWMs. Only one period can be used at a time, thus the first PWM to be enabled will set that period, only other PWMs with that same period can be enabled at the same time. To use another PWM with another period, the enabled PWMs must be disabled first. Example scenario : echo 5000000 > pwm0/period #OK echo 1000000 > pwm0/duty_cycle #OK echo 1000000 > pwm1/period #OK echo 1000000 > pwm1/duty_cycle #OK echo 1 > pwm0/enable #OK echo 1 > pwm1/enable #FAIL (pwm0/period != pwm1/period) echo 0 > pwm0/enable #OK echo 1 > pwm1/enable #OK echo 1000000 > pwm0/period #OK echo 2000000 > pwm0/period #OK echo 1 > pwm0/enable #FAIL (pwm0/period != pwm1/period) echo 2000000 > pwm1/period #OK (pwm1 still running, changed on the fly) echo 1 > pwm0/enable #OK (now pwm0/period == pwm1/period) echo 3000000 > pwm1/period #FAIL (other PWMs running) echo 0 > pwm0/enable #OK echo 3000000 > pwm1/period #OK (only this PWM running) Adapting the code to satisfy these constraints turned up a number of additional issues with the current implementation: - the prescaler value 0 was not used (when it could have been); - when setting the period was not possible, the internal state was inconsistent; - the maximal value for configuring the period was never used; Since all of these interact with each other, rather than trying to fix each individual issue, this patch reworks how the period and duty cycle are set entirely, with the following additional improvements: - implement the new apply() method instead of the individual methods; - return the exact used period/duty_cycle values; - more coherent argument types for period, duty_cycle; Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-26pwm: atmel-hlcdc: Add compatible for SAM9X60 HLCDC's PWMClaudiu Beznea
Add compatible string for SAM9X60 HLCDC's PWM. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 21:15:30 +0000