summaryrefslogtreecommitdiff
path: root/drivers/pwm
AgeCommit message (Collapse)Author
2018-08-20pwm: mediatek: Add MT7628 supportJohn Crispin
Add support for MT7628. The SoC is legacy MIPS and hence has no complex clock tree. This patch add an extra flag to the SoC specific data indicating, that no clocks are present. Signed-off-by: John Crispin <john@phrozen.org> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-08-20pwm: meson: Fix mux clock namesJerome Brunet
Current clock name looks like this: /soc/bus@ffd00000/pwm@1b000#mux0 This is bad because CCF uses the clock to create a directory in clk debugfs. With such name, the directory creation (silently) fails and the debugfs entry end up being created at the debugfs root. With this change, the clock name will now be: ffd1b000.pwm#mux0 This matches the clock naming scheme used in the ethernet and mmc driver. It also fixes the problem with debugfs. Fixes: 36af66a79056 ("pwm: Convert to using %pOF instead of full_name") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-08-20pwm: stm32-lp: Remove useless loop in stm32_pwm_lp_remove()Fabrice Gasnier
LPTimer has only one pwm channel (npwm = 1). Remove useless for loop in remove routine. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-08-20pwm: omap-dmtimer: Return -EPROBE_DEFER if no dmtimer platform dataDavid Rivshin
If a pwm-omap-dmtimer is probed before the dmtimer it uses, the platform data won't be set yet. Fixes: ac30751df953 ("ARM: OMAP: pdata-quirks: Remove unused timer pdata") Cc: <stable@vger.kernel.org> # 4.17+ Signed-off-by: David Rivshin <drivshin@allworx.com> Acked-by: Pavel Machek <pavel@ucw.cz> Tested-by: Pavel Machek <pavel@ucw.cz> Acked-by: Ladislav Michl <ladis@linux-mips.org> Tested-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-07-12pwm: mxs: Switch to SPDX identifierFabio Estevam
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-07-09pwm: fsl-ftm: Enable support for the new SoC i.MX8QMshenwei.wang@nxp.com
Enabled the support for the new SoC i.MX8QM by adding the compatible string of "fsl,imx8qm-ftm-pwm" and its per-compatible data with setting "has_enable_bits" to "true". Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-07-09pwm: fsl-ftm: Added the support of per-compatible datashenwei.wang@nxp.com
On the i.MX8x SoC family, an additional PWM enable bit is added for each PWM channel in the register FTM_SC[23:16]. It supports 8 channels. Bit 16 is for channel 0, and bit 23 is for channel 7. As the IP version information can not be obtained via any of the FTM registers, a property of "has_enable_bits" is added via per-compatible data structure. Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-07-09pwm: fsl-ftm: Added a dedicated IP interface clockshenwei.wang@nxp.com
The current driver assumes that the ftm_sys clock works as one of the clock sources for the IP block as well as the IP interface clock. This assumption does not apply any more on the latest i.MX8x SoC family. On i.MX8x SoCs, a dedicated IP interface clock is introduced and it must be enabled before accessing any FTM registers. Moreover, the clock can not be used as the source clock for the FTM IP block. This patch introduces the ipg_clk as the dedicated IP interface clock and by default it is the same as the ftm_sys clock if not specified. Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-07-09pwm: cros-ec: Switch to SPDX identifierEnric Balletbo i Serra
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-07-09pwm: imx: Switch to SPDX identifierFabio Estevam
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-07-09pwm: tiehrpwm: Fix disabling of output of PWMsVignesh R
pwm-tiehrpwm driver disables PWM output by putting it in low output state via active AQCSFRC register in ehrpwm_pwm_disable(). But, the AQCSFRC shadow register is not updated. Therefore, when shadow AQCSFRC register is re-enabled in ehrpwm_pwm_enable() (say to enable second PWM output), previous settings are lost as shadow register value is loaded into active register. This results in things like PWMA getting enabled automatically, when PWMB is enabled and vice versa. Fix this by updating AQCSFRC shadow register as well during ehrpwm_pwm_disable(). Fixes: 19891b20e7c2 ("pwm: pwm-tiehrpwm: PWM driver support for EHRPWM") Cc: stable@vger.kernel.org Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-07-09pwm: tiehrpwm: Don't use emulation mode bits to control PWM outputVignesh R
As per AM335x TRM SPRUH73P "15.2.2.11 ePWM Behavior During Emulation", TBCTL[15:14] only have effect during emulation suspend events (IOW, to stop PWM when debugging using a debugger). These bits have no effect on PWM output during normal running of system. Hence, remove code accessing these bits as they have no role in enabling/disabling PWMs. Fixes: 19891b20e7c2 ("pwm: pwm-tiehrpwm: PWM driver support for EHRPWM") Cc: stable@vger.kernel.org Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-07-09pwm: berlin: Don't use broken prescaler valuesThomas Hebb
The Berlin PWM driver is currently broken on at least BG2CD. The symptoms manifest as a very non-linear and erratic mapping from the duty cycle configured in software to the duty cycle produced by hardware. The cause of the bug is software's configuration of the prescaler, and in particular its usage of the six prescaler values between the minimum value of 1 and the maximum value of 4096. As it turns out, these six values do not actually slow down the PWM clock; rather, they emulate slowing down the clock by internally multiplying the value of TCNT. This would be a fine trick, if not for the fact that the internal, scaled TCNT value has no extra bits beyond the 16 already exposed to software in the register. What this means is that, for a prescaler of 4, the software must ensure that the top two bits of TCNT are not set, because hardware will chop them off; for a prescaler of 8, the top three bits must not be set, and so forth. Software does not currently ensure this, resulting in a TCNT several orders of magnitude lower than intended any time one of those six prescalers are selected. Because hardware chops off the high bits in its internal shift, the middle six prescalers don't actually allow *anything* that the first doesn't. In fact, they are strictly worse than the first, since the internal shift of TCNT prevents software from setting the low bits, decreasing the resolution, without providing any extra high bits. By skipping the useless prescalers entirely, this patch both fixes the driver's behavior and increases its performance (since, when the 4096 prescaler is selected, it now does only a single shift rather than the seven successive divisions it did before). Tested on BG2CD. Signed-off-by: Thomas Hebb <tommyhebb@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-06-14Merge tag 'pwm/for-4.18-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "This contains a couple of fixes and cleanups for the Meson and ACPI/LPSS drivers as well as capture support for STM32. Note that given the cross- subsystem changes, the STM32 patches were merged through the MFD and PWM trees, both sharing an immutable branch" * tag 'pwm/for-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: stm32: Fix build warning with CONFIG_DMA_ENGINE disabled pwm: stm32: Enforce dependency on CONFIG_MFD_STM32_TIMERS ACPI / LPSS: Add missing prv_offset setting for byt/cht PWM devices pwm: lpss: platform: Save/restore the ctrl register over a suspend/resume dt-bindings: mfd: stm32-timers: Add support for dmas pwm: simplify getting .drvdata pwm: meson: Fix allocation of PWM channel array
2018-06-12treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-06pwm: stm32: Fix build warning with CONFIG_DMA_ENGINE disabledArnd Bergmann
Without dmaengine support, we get a harmless warning about an unused function: drivers/pwm/pwm-stm32.c:166:12: error: 'stm32_pwm_capture' defined but not used [-Werror=unused-function] Changing the #ifdef to an IS_ENABLED() check shuts up that warning and is slightly nicer to read. Fixes: 53e38fe73f94 ("pwm: stm32: Add capture support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-06-06Merge tag 'ib-mfd-pwm-v4.18-1' of ↵Thierry Reding
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into for-next Immutable branch between MFD and PWM due for the v4.18 merge window (v2)
2018-06-06pwm: stm32: Enforce dependency on CONFIG_MFD_STM32_TIMERSArnd Bergmann
When compile-testing the PWM driver without also enabling the stm32_timers MFD, we run into a link error: drivers/pwm/pwm-stm32.o: In function `stm32_pwm_raw_capture.isra.6': pwm-stm32.c:(.text+0xcb0): undefined reference to `stm32_timers_dma_burst_read' We don't need the '|| COMPILE_TEST' here, since stm32_timers itself can be built with CONFIG_COMPILE_TEST on all architectures, so we do get the coverage through allmodconfig and randconfig builds even when we make it a hard dependency. Fixes: 7edf7369205b ("pwm: Add driver for STM32 plaftorm") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-06-06pwm: lpss: platform: Save/restore the ctrl register over a suspend/resumeHans de Goede
On some devices the contents of the ctrl register get lost over a suspend/resume and the PWM comes back up disabled after the resume. This is seen on some Bay Trail devices with the PWM in ACPI enumerated mode, so it shows up as a platform device instead of a PCI device. If we still think it is enabled and then try to change the duty-cycle after this, we end up with a "PWM_SW_UPDATE was not cleared" error and the PWM is stuck in that state from then on. This commit adds suspend and resume pm callbacks to the pwm-lpss-platform code, which save/restore the ctrl register over a suspend/resume, fixing this. Note that: 1) There is no need to do this over a runtime suspend, since we only runtime suspend when disabled and then we properly set the enable bit and reprogram the timings when we re-enable the PWM. 2) This may be happening on more systems then we realize, but has been covered up sofar by a bug in the acpi-lpss.c code which was save/restoring the regular device registers instead of the lpss private registers due to lpss_device_desc.prv_offset not being set. This is fixed by a later patch in this series. Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-06-04pwm: stm32: Initialize raw local variablesFabrice Gasnier
This removes build warning when COMPILE_TEST=y and MFD_STM32_TIMERS=n in drivers/pwm/pwm-stm32.c. In function 'stm32_pwm_capture' 'raw_prd' and 'raw_dty' may be used uninitialized in this function [-Wmaybe-uninitialized] Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-05-16pwm: stm32: Use input prescaler to improve period captureFabrice Gasnier
Using input prescaler, capture unit will trigger DMA once every configurable /2, /4 or /8 events (rising edge). This helps improve period (only) capture accuracy at high rates. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Acked-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-05-16pwm: stm32: Improve capture by tuning counter prescalerFabrice Gasnier
Currently, capture is based on timeout window to configure prescaler. PWM capture framework provides 1s window at the time of writing. There's place for improvement, after input signal has been captured once: - Finer tune counter clock prescaler, by using 1st capture result (with arbitrary margin). - Do a 2nd capture, with scaled capture window. This increases accuracy, especially at high rates. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Acked-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-05-16pwm: stm32: Add capture supportFabrice Gasnier
Add support for PMW input mode on pwm-stm32. STM32 timers support period and duty cycle capture as long as they have at least two PWM channels. One capture channel is used for period (rising-edge), one for duty-cycle (falling-edge). When there's only one channel available, only period can be captured. Duty-cycle is simply zero'ed in such a case. Capture requires exclusive access (e.g. no pwm output running at the same time, to protect common prescaler). Timer DMA burst mode (from MFD core) is being used, to take two snapshots of capture registers (upon each period rising edge). Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Acked-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-04-30pwm: simplify getting .drvdataWolfram Sang
We should get drvdata from struct device directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-04-30pwm: meson: Fix allocation of PWM channel arrayMartin Blumenstingl
Using the pwm-meson driver on the 32-bit SoCs causes memory corruption. The result are some hard-to-explain errors, for example devm_clk_register() crashes with a NULL dereference somewhere deep in the common clock framework code. In some cases the kernel even refused to boot when any of the PWM controllers were enabled on Meson8b. The root cause is an incorrect memory size in the devm_kcalloc() call in meson_pwm_probe(). The code allocates an array of meson_pwm_channel structs, but the size given is the size of the meson_pwm struct (which seems like a small copy-and-paste error, as meson_pwm is allocated a few lines above). Even with this typo the code seemed to work fine on the 64-bit GX SoCs (maybe due to the structs having the same size in the compiled result, but I haven't checked this further). Fixes: 211ed630753d2f ("pwm: Add support for Meson PWM Controller") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-04-13Merge tag 'pwm/for-4.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "This set of changes adds support for more generations of the RCar controller as well as runtime PM support. The JZ4740 driver gains support for device tree and can now be used on all Ingenic SoCs. Rounding things off is a random assortment of fixes and cleanups all across the board" * tag 'pwm/for-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (29 commits) pwm: rcar: Add suspend/resume support pwm: rcar: Use PM Runtime to control module clock dt-bindings: pwm: rcar: Add bindings for R-Car M3N support pwm: rcar: Fix a condition to prevent mismatch value setting to duty pwm: sysfs: Use put_device() instead of kfree() dt-bindings: pwm: sunxi: Add new compatible strings pwm: sun4i: Simplify controller mapping pwm: sun4i: Drop unused .has_rdy member pwm: sun4i: Properly check current state pwm: Remove depends on AVR32 pwm: stm32: LPTimer: Use 3 cells ->of_xlate() dt-bindings: pwm-stm32-lp: Add #pwm-cells pwm: stm32: Protect common prescaler for all channels pwm: stm32: Remove unused struct device pwm: mediatek: Improve precision in rate calculation pwm: mediatek: Remove redundant MODULE_ALIAS entries pwm: mediatek: Fix up PWM4 and PWM5 malfunction on MT7623 pwm: jz4740: Enable for all Ingenic SoCs pwm: jz4740: Add support for devicetree pwm: jz4740: Implement ->set_polarity() ...
2018-04-05Merge tag 'armsoc-soc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Arnd Bergmann: "This release brings up a new platform based on the old ARM9 core: the Nuvoton NPCM is used as a baseboard management controller, competing with the better known ASpeed AST2xx series. Another important change is the addition of ARMv7-A based chips in mach-stm32. The older parts in this platform are ARMv7-M based microcontrollers, now they are expanding to general-purpose workloads. The other changes are the usual defconfig updates to enable additional drivers, lesser bugfixes. The largest updates as often are the ongoing OMAP cleanups, but we also have a number of changes for the older PXA and davinci platforms this time. For the Renesas shmobile/r-car platform, some new infrastructure is needed to make the watchdog work correctly. Supporting Multiprocessing on Allwinner A80 required a significant amount of new code, but is not doing anything unexpected" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (179 commits) arm: npcm: modify configuration for the NPCM7xx BMC. MAINTAINERS: update entry for ARM/berlin ARM: omap2: fix am43xx build without L2X0 ARM: davinci: da8xx: simplify CFGCHIP regmap_config ARM: davinci: da8xx: fix oops in USB PHY driver due to stack allocated platform_data ARM: multi_v7_defconfig: add NXP FlexCAN IP support ARM: multi_v7_defconfig: enable thermal driver for i.MX devices ARM: multi_v7_defconfig: add RN5T618 PMIC family support ARM: multi_v7_defconfig: add NXP graphics drivers ARM: multi_v7_defconfig: add GPMI NAND controller support ARM: multi_v7_defconfig: add OCOTP driver for NXP SoCs ARM: multi_v7_defconfig: configure I2C driver built-in arm64: defconfig: add CONFIG_UNIPHIER_THERMAL and CONFIG_SNI_AVE ARM: imx: fix imx6sll-only build ARM: imx: select ARM_CPU_SUSPEND for CPU_IDLE as well ARM: mxs_defconfig: Re-sync defconfig ARM: imx_v4_v5_defconfig: Use the generic fsl-asoc-card driver ARM: imx_v4_v5_defconfig: Re-sync defconfig arm64: defconfig: enable stmmac ethernet to defconfig ARM: EXYNOS: Simplify code in coupled CPU idle hot path ...
2018-03-28pwm: rcar: Add suspend/resume supportYoshihiro Shimoda
This patch adds suspend/resume support for Renesas PWM driver. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-03-28pwm: rcar: Use PM Runtime to control module clockHien Dang
Runtime PM API (pm_runtime_get_sync/pm_runtime_put) should be used to control module clock instead of clk_prepare_enable and clk_disable_unprepare. Signed-off-by: Hien Dang <hien.dang.eb@renesas.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-03-28pwm: rcar: Fix a condition to prevent mismatch value setting to dutyRyo Kodama
This patch fixes an issue that is possible to set mismatch value to duty for R-Car PWM if we input the following commands: # cd /sys/class/pwm/<pwmchip>/ # echo 0 > export # cd pwm0 # echo 30 > period # echo 30 > duty_cycle # echo 0 > duty_cycle # cat duty_cycle 0 # echo 1 > enable --> Then, the actual duty_cycle is 30, not 0. So, this patch adds a condition into rcar_pwm_config() to fix this issue. Signed-off-by: Ryo Kodama <ryo.kodama.vz@renesas.com> [shimoda: revise the commit log and add Fixes and Cc tags] Fixes: ed6c1476bf7f ("pwm: Add support for R-Car PWM Timer") Cc: Cc: <stable@vger.kernel.org> # v4.4+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-03-28pwm: sysfs: Use put_device() instead of kfree()Arvind Yadav
Never directly free @dev after calling device_register(), even if it returned an error! Always use put_device() to give up the reference initialized. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-03-28pwm: sun4i: Simplify controller mappingAndre Przywara
At the moment we assign our supported compatible strings to a respective instance of our sun4i_pwm_data structure, even though some of them are the same. To avoid further clutter, split out the three different combinations of features we have at the moment and name them accordingly. This should make it more obvious which compatible string to use for new SoCs. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-03-28pwm: sun4i: Drop unused .has_rdy memberAndre Przywara
Commit a054c4d68408 ("pwm: sun4i: Drop legacy callbacks") dropped the only user of the .has_rdy member in our sun4i_pwm_data struct. Consequently we don't need to store this anymore for the various SoCs, which paves the way for further simplifications. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-03-28pwm: sun4i: Properly check current stateAlexandre Belloni
Correctly extract the prescaler value from CTRL_REG before comparing it to PWM_PRESCAL_MASK. Also, check that both PWM_CLK_GATING and PWM_EN to ensure the PWM is enabled instead of relying on only one of those. Fixes: 93e0dfb2c52f ("pwm: sun4i: Improve hardware read out") Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-03-28pwm: Remove depends on AVR32Corentin Labbe
AVR32 is gone, so no more need to depend on it. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-03-28pwm: stm32: LPTimer: Use 3 cells ->of_xlate()Gerald Baeza
STM32 Low-Power Timer supports generic 3 cells PWM to encode PWM number, period and polarity. Signed-off-by: Gerald Baeza <gerald.baeza@st.com> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-03-28pwm: stm32: Protect common prescaler for all channelsFabrice Gasnier
There may be a race, when configuring two PWM channels, with different prescaler values, when there's no active channel yet. Add mutex lock to avoid concurrent access on PWM apply state. This is also precursor patch for PWM capture support. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-03-28pwm: stm32: Remove unused struct deviceFabrice Gasnier
dev is never assigned or used. Remove it. Fixes: 7edf7369205b ("pwm: Add driver for STM32 plaftorm") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-03-28pwm: mediatek: Improve precision in rate calculationSean Wang
Add a way that turning resolution from in nanosecond into in picosecond to improve noticeably almost 4.5% precision. It's necessary to hold the new resolution with type u64 and thus related operations on u64 are applied instead in those rate calculations. And the patch has a dependency on [1]. [1] http://lists.infradead.org/pipermail/linux-mediatek/2018-March/012225.html Cc: stable@vger.kernel.org Fixes: caf065f8fd58 ("pwm: Add MediaTek PWM support") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-03-28pwm: mediatek: Remove redundant MODULE_ALIAS entriesSean Wang
MODULE_ALIAS exports information to allow the module to be auto-loaded at boot for the drivers registered using legacy platform registration. However, currently the driver is always used by DT-only platform, MODULE_ALIAS is redundant and should be removed properly. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-03-28pwm: mediatek: Fix up PWM4 and PWM5 malfunction on MT7623Sean Wang
Since the offset for both registers, PWMDWIDTH and PWMTHRES, used to control PWM4 or PWM5 are distinct from the other PWMs, whose wrong programming on PWM hardware causes waveform cannot be output as expected. Thus, the patch adds the extra condition for fixing up the weird case to let PWM4 or PWM5 able to work on MT7623. v1 -> v2: use pwm45_fixup naming instead of pwm45_quirk v2 -> v3: add more tags for Reviewed-by, Fixes, and Cc stable Cc: stable@vger.kernel.org Fixes: caf065f8fd58 ("pwm: Add MediaTek PWM support") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Cc: Zhi Mao <zhi.mao@mediatek.com> Cc: John Crispin <john@phrozen.org> Cc: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-03-28pwm: jz4740: Enable for all Ingenic SoCsPaul Cercueil
This driver works perfectly with all the versions of the SoCs from Ingenic that are supported upstream. This makes the driver usable on JZ4740, JZ4770 and JZ4780 SoCs. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-03-28pwm: jz4740: Add support for devicetreePaul Cercueil
Add support for probing the pwm-jz4740 directly from devicetree. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-03-28pwm: jz4740: Implement ->set_polarity()Paul Cercueil
This permits clients of this driver to specify the polarity to use for their PWM channel. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-03-28pwm: jz4740: Make disable operation compatible with TCU2 modeMaarten ter Huurne
On the JZ4750 and later SoCs, channel 1 and 2 operate in a different way (TCU2 mode) as the other channels. If a TCU2 mode counter is stopped before its PWM functionality is disabled, the output is not guaranteed to return to the initial level. Signed-off-by: Maarten ter Huurne <maarten@treewalker.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-03-28pwm: imx: Let PWM be active during suspendFabio Estevam
On a imx6q-cubox-i board, which has an LED driven by PWM, when the system goes into suspend the PWM block is disabled by default, then the PWM pin goes to logic level zero and turn on the LED during suspend, which is not really the behaviour we want to see. By keeping the PWM enabled during suspend via STOPEN bit, the pwm-leds driver sets the brightness to zero in suspend and then the LED is turned off as expected. So always set the STOPEN to fix the PWM behaviour in suspend. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-03-27pwm: atmel-tcb: Delete an error message for a failed memory allocationMarkus Elfring
Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-03-27pwm: puv3: Delete an error message for a failed memory allocationMarkus Elfring
Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-03-27pwm: stm32: Adopt SPDX identifierBenjamin Gaignard
Add SPDX identifier to make it easier to determine the license of the file. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Acked-by: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-03-26pwm: remove pwm-bfin driverArnd Bergmann
The blackfin architecture is getting removed, so this driver is now obsolete as well. Acked-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Aaron Wu <aaron.wu@analog.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 21:33:05 +0000