summaryrefslogtreecommitdiff
path: root/drivers/pwm/pwm-ab8500.c
AgeCommit message (Collapse)Author
2021-03-22pwm: Always allocate PWM chip base ID dynamicallyUwe Kleine-König
Since commit 5e5da1e9fbee ("pwm: ab8500: Explicitly allocate pwm chip base dynamically") all drivers use dynamic ID allocation explicitly. New drivers are supposed to do the same, so remove support for driver specified base IDs and drop all assignments in the low-level drivers. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-03-22pwm: ab8500: Implement .apply instead of .config, .enable and .disableUwe Kleine-König
To eventually get rid of all legacy drivers convert this driver to the modern world implementing .apply(). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-12-17pwm: ab8500: Explicitly allocate pwm chip base dynamicallyUwe Kleine-König
The ab8500 driver is the last one which doesn't (explicitly) use dynamic allocation of the pwm id. Looking through the kernel sources I didn't find a place that relies on this id. And with the device probed from device tree pdev->id is -1 anyhow; making this explicit looks beneficial, too. Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-12-17pwm: ab8500: Add error message if pwmchip_add() failsUwe Kleine-König
pwmchip_add() doesn't emit an error message, so add one in the driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 194Thomas Gleixner
Based on 1 normalized pattern(s): license terms gnu general public license gpl version 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 161 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528170027.447718015@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-20pwm: drop owner assignment from platform_driversWolfram Sang
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-05-21pwm: ab8500: Fix wrong value shift for disable/enable PWMAxel Lin
Current code only works when pdev->id is 1. Fix it by passing correct bit values to abx500_mask_and_set_register_interruptible(). Having DISABLE_PWM/ENABLE_PWM does not make the code more readable because the bit values depend on pdev->id. Thus drop the DISABLE_PWM and ENABLE_PWM defines. This patch also removes an unnecessary return in ab8500_pwm_disable(). Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Alexandre BOURDIOL <alexandre.bourdiol@st.com> Acked-by: Philippe Begnic <philippe.begnic@st.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-04-28pwm: ab8500: Remove unnecessary OOM messagesJingoo Han
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-04-02pwm: ab8500: Add .owner to struct pwm_opsAxel Lin
Add missing .owner of struct pwm_ops. This prevents the module from being removed from underneath its users. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-03-26pwm: ab8500: Fix trivial typo in dev_err messageAxel Lin
Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-03-08pwm: ab8500: use devm_kzalloc()Jingoo Han
Use devm_kzalloc() to make cleanup paths more simple. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-11-28pwm: remove use of __devexitBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28pwm: remove use of __devinitBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28pwm: remove use of __devexit_pBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-20pwm: Move AB8500 PWM driver to PWM frameworkThierry Reding
This commit moves the driver to drivers/pwm and converts it to the new PWM framework. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Arun Murthy <arun.murthy@stericsson.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-13 07:36:40 +0000