summaryrefslogtreecommitdiff
path: root/drivers/ptp
AgeCommit message (Collapse)Author
2020-11-07ptp: idt82p33: optimize _idt82p33_adjfineMin Li
Use div_s64 so that the neg_adj is not needed. Signed-off-by: Min Li <min.li.xe@renesas.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/1604634729-24960-3-git-send-email-min.li.xe@renesas.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-07ptp: idt82p33: use i2c_master_send for bus writeMin Li
Refactor idt82p33_xfer and use i2c_master_send for write operation. Because some I2C controllers are only working with single-burst write transaction. Signed-off-by: Min Li <min.li.xe@renesas.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/1604634729-24960-2-git-send-email-min.li.xe@renesas.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-07ptp: idt82p33: add adjphase supportMin Li
Add idt82p33_adjphase() to support PHC write phase mode. Signed-off-by: Min Li <min.li.xe@renesas.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/1604634729-24960-1-git-send-email-min.li.xe@renesas.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-18ptp_qoriq: support FIPER3Yangbo Lu
The FIPER3 (fixed interval period pulse generator) is supported on DPAA2 and ENETC network controller hardware. This patch is to support it in ptp_qoriq driver. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26ptp: ptp_ines: Remove redundant null checkXu Wang
Because kfree_skb already checked NULL skb parameter, so the additional check is unnecessary, just remove it. Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
2020-08-19ptp: ptp_clockmatrix: use i2c_master_send for i2c writeMin Li
The old code for i2c write would break on some controllers, which fails at handling Repeated Start Condition. So we will just use i2c_master_send to handle write in one transanction. Changes since v1: - Remove indentation change Signed-off-by: Min Li <min.li.xe@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-19ptp: ptp_ines: Use generic helper functionKurt Kanzenbach
In order to reduce code duplication between ptp drivers, generic helper functions were introduced. Use them. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-05ptp: only allow phase values lower than 1 periodVladimir Oltean
The way we define the phase (the difference between the time of the signal's rising edge, and the closest integer multiple of the period), it doesn't make sense to have a phase value equal or larger than 1 period. So deny these settings coming from the user. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-30ptp: ptp_clockmatrix: update to support 4.8.7 firmwareMin Li
With 4.8.7 firmware, adjtime can change delta instead of absolute time, which greately increases snap accuracy. PPS alignment doesn't have to be set for every single TOD change. Other minor changes includes: adding more debug logs, increasing snap accuracy for pre 4.8.7 firmware and supporting new tcs2bin format. Signed-off-by: Min Li <min.li.xe@renesas.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19ptp: add ability to configure duty cycle for periodic outputVladimir Oltean
There are external event timestampers (PHCs with support for PTP_EXTTS_REQUEST) that timestamp both event edges. When those edges are very close (such as in the case of a short pulse), there is a chance that the collected timestamp might be of the rising, or of the falling edge, we never know. There are also PHCs capable of generating periodic output with a configurable duty cycle. This is good news, because we can space the rising and falling edge out enough in time, that the risks to overrun the 1-entry timestamp FIFO of the extts PHC are lower (example: the perout PHC can be configured for a period of 1 second, and an "on" time of 0.5 seconds, resulting in a duty cycle of 50%). A flag is introduced for signaling that an on time is present in the perout request structure, for preserving compatibility. Logically speaking, the duty cycle cannot exceed 100% and the PTP core checks for this. PHC drivers that don't support this flag emit a periodic output of an unspecified duty cycle, same as before. The duty cycle is encoded as an "on" time, similar to the "start" and "period" times, and reuses the reserved space while preserving overall binary layout. Pahole reported before: struct ptp_perout_request { struct ptp_clock_time start; /* 0 16 */ struct ptp_clock_time period; /* 16 16 */ unsigned int index; /* 32 4 */ unsigned int flags; /* 36 4 */ unsigned int rsv[4]; /* 40 16 */ /* size: 56, cachelines: 1, members: 5 */ /* last cacheline: 56 bytes */ }; And now: struct ptp_perout_request { struct ptp_clock_time start; /* 0 16 */ struct ptp_clock_time period; /* 16 16 */ unsigned int index; /* 32 4 */ unsigned int flags; /* 36 4 */ union { struct ptp_clock_time on; /* 40 16 */ unsigned int rsv[4]; /* 40 16 */ }; /* 40 16 */ /* size: 56, cachelines: 1, members: 5 */ /* last cacheline: 56 bytes */ }; Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-25ptp_pch: use generic power managementVaibhav Gupta
With legacy PM, drivers themselves were responsible for managing the device's power states and takes care of register states. After upgrading to the generic structure, PCI core will take care of required tasks and drivers should do only device-specific operations. In the case of ptp_pch, after removing PCI helper functions, .suspend() and .resume() became empty-body functions. Hence, define them NULL and use dev_pm_ops. Compile-tested only. Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-05-25ptp_clock: Let the ADJ_OFFSET interface respect the ADJ_NANO flag for PHC ↵Richard Cochran
devices. In commit 184ecc9eb260d5a3bcdddc5bebd18f285ac004e9 ("ptp: Add adjphase function to support phase offset control.") the PTP Hardware Clock interface expanded to support the ADJ_OFFSET offset mode. However, the implementation did not respect the traditional yet pedantic distinction between units of microseconds and nanoseconds signaled by the ADJ_NANO flag. This patch fixes the issue by adding logic to handle that flag. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Vincent Cheng <vincent.cheng.xh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-02ptp: ptp_clockmatrix: Add adjphase() to support PHC write phase mode.Vincent Cheng
Add idtcm_adjphase() to support PHC write phase mode. Signed-off-by: Vincent Cheng <vincent.cheng.xh@renesas.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-02ptp: Add adjust_phase to ptp_clock_caps capability.Vincent Cheng
Add adjust_phase to ptp_clock_caps capability to allow user to query if a PHC driver supports adjust phase with ioctl PTP_CLOCK_GETCAPS command. Signed-off-by: Vincent Cheng <vincent.cheng.xh@renesas.com> Reviewed-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-02ptp: Add adjphase function to support phase offset control.Vincent Cheng
Adds adjust phase function to take advantage of a PHC clock's hardware filtering capability that uses phase offset control word instead of frequency offset control word. Signed-off-by: Vincent Cheng <vincent.cheng.xh@renesas.com> Reviewed-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-29ptp: ptp_ines: convert to devm_platform_ioremap_resourceWei Yongjun
Use the helper function that wraps the calls to platform_get_resource() and devm_ioremap_resource() together. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-25ptp: clockmatrix: remove unnecessary comparisonYang Yingliang
The type of loaddr is u8 which is always '<=' 0xff, so the loaddr <= 0xff is always true, we can remove this comparison. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Vincent Cheng <vincent.cheng.xh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Simple overlapping changes to linux/vermagic.h Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-24ptp: idt82p33: remove unnecessary comparisonYang Yingliang
The type of loaddr is u8 which is always '<=' 0xff, so the loaddr <= 0xff is always true, we can remove this comparison. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-21ptp: Remove unneeded conversion to boolJason Yan
The '==' expression itself is bool, no need to convert it to bool again. This fixes the following coccicheck warning: drivers/ptp/ptp_ines.c:403:55-60: WARNING: conversion to bool not needed here drivers/ptp/ptp_ines.c:404:55-60: WARNING: conversion to bool not needed here Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-20ptp: idt82p33: Make two variables staticYueHaibing
Fix sparse warnings: drivers/ptp/ptp_idt82p33.c:26:5: warning: symbol 'sync_tod_timeout' was not declared. Should it be static? drivers/ptp/ptp_idt82p33.c:31:5: warning: symbol 'phase_snap_threshold' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-20ptp_kvm: Make kvm_ptp_lock staticYueHaibing
Fix sparse warning: drivers/ptp/ptp_kvm.c:25:1: warning: symbol 'kvm_ptp_lock' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30ptp: Avoid deadlocks in the programmable pin code.Richard Cochran
The PTP Hardware Clock (PHC) subsystem offers an API for configuring programmable pins. User space sets or gets the settings using ioctls, and drivers verify dialed settings via a callback. Drivers may also query pin settings by calling the ptp_find_pin() method. Although the core subsystem protects concurrent access to the pin settings, the implementation places illogical restrictions on how drivers may call ptp_find_pin(). When enabling an auxiliary function via the .enable(on=1) callback, drivers may invoke the pin finding method, but when disabling with .enable(on=0) drivers are not permitted to do so. With the exception of the mv88e6xxx, all of the PHC drivers do respect this restriction, but still the locking pattern is both confusing and unnecessary. This patch changes the locking implementation to allow PHC drivers to freely call ptp_find_pin() from their .enable() and .verify() callbacks. V2 ChangeLog: - fixed spelling in the kernel doc - add Vladimir's tested by tag Signed-off-by: Richard Cochran <richardcochran@gmail.com> Reported-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-05ptp: add VMware virtual PTP clock driverVivek Thampi
Add a PTP clock driver called ptp_vmw, for guests running on VMware ESXi hypervisor. The driver attaches to a VMware virtual device called "precision clock" that provides a mechanism for querying host system time. Similar to existing virtual PTP clock drivers (e.g. ptp_kvm), ptp_vmw utilizes the kernel's PTP hardware clock API to implement a clock device that can be used as a reference in Chrony for synchronizing guest time with host. The driver is only applicable to x86 guests running in VMware virtual machines with precision clock virtual device present. It uses a VMware specific hypercall mechanism to read time from the device. Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Vivek Thampi <vithampi@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-24ptp: Add a ptp clock driver for IDT 82P33 SMU.Min Li
The IDT 82P33 Synchronization Management Unit (SMU) family provides tools to manage timing references, clock sources and timing paths for IEEE 1588 / Precision Time Protocol (PTP) and Synchronous Ethernet (SyncE) based clocks. The device supports up to three independent timing paths that control: PTP clock synthesis; SyncE clock generation; and general purpose frequency translation. The device supports physical layer timing with Digital PLLs (DPLLs) and it supports packet based timing with Digitally Controlled Oscillators (DCOs). This patch adds support for ptp clock based on the device. Changes since v1: - As suggested by Richard Cochran: 1. Replace _mask_bit_count with the existing hweight8 2. Prefix all functions with idt82p33 3. Fix white space issues in Kconfig and Makefile 4. Remove forward declaration 5. Use adjfine instead of adjfreq for better resolution - As suggested by David Miller: 1. Replace CHAN_INIT macro with a static function idt82p33_channel_init 2. Employ reverse christmas tree ordering for local variables 3. Fix indentation problem by appropriate number of TAB then SPACE character Signed-off-by: Min Li <min.li.xe@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-16ptp_qoriq: drop the code of alarmYangbo Lu
The alarm function hadn't been supported by PTP clock driver. The recommended solution PHC + phc2sys + nanosleep provides best performance. So drop the code of alarm in ptp_qoriq driver. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
2020-01-14ptp: free ptp device pin descriptors properlyVladis Dronov
There is a bug in ptp_clock_unregister(), where ptp_cleanup_pin_groups() first frees ptp->pin_{,dev_}attr, but then posix_clock_unregister() needs them to destroy a related sysfs device. These functions can not be just swapped, as posix_clock_unregister() frees ptp which is needed in the ptp_cleanup_pin_groups(). Fix this by calling ptp_cleanup_pin_groups() in ptp_clock_release(), right before ptp is freed. This makes this patch fix an UAF bug in a patch which fixes an UAF bug. Reported-by: Antti Laakso <antti.laakso@intel.com> Fixes: a33121e5487b ("ptp: fix the race between the release of ptp_clock and cdev") Link: https://lore.kernel.org/netdev/3d2bd09735dbdaf003585ca376b7c1e5b69a19bd.camel@intel.com/ Signed-off-by: Vladis Dronov <vdronov@redhat.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-12ptp: ixp46x: move adjacent to ethernet driverArnd Bergmann
The ixp46x ptp driver has a somewhat unusual setup, where the ptp driver and the ethernet driver are in different directories but access the same registers that are defined a platform specific header file. Moving everything into drivers/net/ makes it look more like most other ptp drivers and allows compile-testing this driver on other targets. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-01-07ptp: clockmatrix: Rework clockmatrix version information.Vincent Cheng
Simplify and fix the version information displayed by the driver. The new info better relects what is needed to support the hardware. Prev: Version: 4.8.0, Pipeline 22169 0x4001, Rev 0, Bond 5, CSR 311, IRQ 2 New: Version: 4.8.0, Id: 0x4001 Hw Rev: 5 OTP Config Select: 15 - Remove pipeline, CSR and IRQ because version x.y.z already incorporates this information. - Remove bond number because it is not used. - Remove rev number because register was not implemented, always 0 - Add HW Rev ID register to replace rev number - Add OTP config select to show the user configuration chosen by the configurable GPIO pins on start-up Signed-off-by: Vincent Cheng <vincent.cheng.xh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02ptp: ptp_clockmatrix: constify copied structureJulia Lawall
The idtcm_caps structure is only copied into another structure, so make it const. The opportunity for this change was found using Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Simple overlapping changes in bpf land wrt. bpf_helper_defs.h handling. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-30ptp: introduce ptp_cancel_worker_syncVladimir Oltean
In order to effectively use the PTP kernel thread for tasks such as timestamping packets, allow the user control over stopping it, which is needed e.g. when the timestamping queues must be drained. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-30ptp: fix the race between the release of ptp_clock and cdevVladis Dronov
In a case when a ptp chardev (like /dev/ptp0) is open but an underlying device is removed, closing this file leads to a race. This reproduces easily in a kvm virtual machine: ts# cat openptp0.c int main() { ... fp = fopen("/dev/ptp0", "r"); ... sleep(10); } ts# uname -r 5.5.0-rc3-46cf053e ts# cat /proc/cmdline ... slub_debug=FZP ts# modprobe ptp_kvm ts# ./openptp0 & [1] 670 opened /dev/ptp0, sleeping 10s... ts# rmmod ptp_kvm ts# ls /dev/ptp* ls: cannot access '/dev/ptp*': No such file or directory ts# ...woken up [ 48.010809] general protection fault: 0000 [#1] SMP [ 48.012502] CPU: 6 PID: 658 Comm: openptp0 Not tainted 5.5.0-rc3-46cf053e #25 [ 48.014624] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), ... [ 48.016270] RIP: 0010:module_put.part.0+0x7/0x80 [ 48.017939] RSP: 0018:ffffb3850073be00 EFLAGS: 00010202 [ 48.018339] RAX: 000000006b6b6b6b RBX: 6b6b6b6b6b6b6b6b RCX: ffff89a476c00ad0 [ 48.018936] RDX: fffff65a08d3ea08 RSI: 0000000000000247 RDI: 6b6b6b6b6b6b6b6b [ 48.019470] ... ^^^ a slub poison [ 48.023854] Call Trace: [ 48.024050] __fput+0x21f/0x240 [ 48.024288] task_work_run+0x79/0x90 [ 48.024555] do_exit+0x2af/0xab0 [ 48.024799] ? vfs_write+0x16a/0x190 [ 48.025082] do_group_exit+0x35/0x90 [ 48.025387] __x64_sys_exit_group+0xf/0x10 [ 48.025737] do_syscall_64+0x3d/0x130 [ 48.026056] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 48.026479] RIP: 0033:0x7f53b12082f6 [ 48.026792] ... [ 48.030945] Modules linked in: ptp i6300esb watchdog [last unloaded: ptp_kvm] [ 48.045001] Fixing recursive fault but reboot is needed! This happens in: static void __fput(struct file *file) { ... if (file->f_op->release) file->f_op->release(inode, file); <<< cdev is kfree'd here if (unlikely(S_ISCHR(inode->i_mode) && inode->i_cdev != NULL && !(mode & FMODE_PATH))) { cdev_put(inode->i_cdev); <<< cdev fields are accessed here Namely: __fput() posix_clock_release() kref_put(&clk->kref, delete_clock) <<< the last reference delete_clock() delete_ptp_clock() kfree(ptp) <<< cdev is embedded in ptp cdev_put module_put(p->owner) <<< *p is kfree'd, bang! Here cdev is embedded in posix_clock which is embedded in ptp_clock. The race happens because ptp_clock's lifetime is controlled by two refcounts: kref and cdev.kobj in posix_clock. This is wrong. Make ptp_clock's sysfs device a parent of cdev with cdev_device_add() created especially for such cases. This way the parent device with its ptp_clock is not released until all references to the cdev are released. This adds a requirement that an initialized but not exposed struct device should be provided to posix_clock_register() by a caller instead of a simple dev_t. This approach was adopted from the commit 72139dfa2464 ("watchdog: Fix the race between the release of watchdog_core_data and cdev"). See details of the implementation in the commit 233ed09d7fda ("chardev: add helper function to register char devs with a struct device"). Link: https://lore.kernel.org/linux-fsdevel/20191125125342.6189-1-vdronov@redhat.com/T/#u Analyzed-by: Stephen Johnston <sjohnsto@redhat.com> Analyzed-by: Vern Lovejoy <vlovejoy@redhat.com> Signed-off-by: Vladis Dronov <vdronov@redhat.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-25ptp: Add a driver for InES time stamping IP core.Richard Cochran
The InES at the ZHAW offers a PTP time stamping IP core. The FPGA logic recognizes and time stamps PTP frames on the MII bus. This patch adds a driver for the core along with a device tree binding to allow hooking the driver to MII buses. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Mere overlapping changes in the conflicts here. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-16ptp_qoriq: export extts_clean_up() functionYangbo Lu
Export extts_clean_up() function so that dpaa2-ptp driver is able to reuse it. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-16ptp_qoriq: check valid status before reading extts fifoYangbo Lu
For PTP timer supporting external trigger timestamp FIFO, there is a valid bit in TMR_STAT register indicating the timestamp is available. For PTP timer without FIFO, there is not TMR_STAT register. This patch is to check the valid bit for the FIFO before reading timestamp, and to avoid operating TMR_STAT register for PTP timer without the FIFO. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-13ptp: clockmatrix: add I2C dependencyArnd Bergmann
Without I2C, we get a link failure: drivers/ptp/ptp_clockmatrix.o: In function `idtcm_xfer.isra.3': ptp_clockmatrix.c:(.text+0xcc): undefined reference to `i2c_transfer' drivers/ptp/ptp_clockmatrix.o: In function `idtcm_driver_init': ptp_clockmatrix.c:(.init.text+0x14): undefined reference to `i2c_register_driver' drivers/ptp/ptp_clockmatrix.o: In function `idtcm_driver_exit': ptp_clockmatrix.c:(.exit.text+0x10): undefined reference to `i2c_del_driver' Fixes: 3a6ba7dc7799 ("ptp: Add a ptp clock driver for IDT ClockMatrix.") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Vincent Cheng <vincent.cheng.xh@renesas.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Lots of overlapping changes and parallel additions, stuff like that. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-15ptp: Introduce strict checking of external time stamp options.Richard Cochran
User space may request time stamps on rising edges, falling edges, or both. However, the particular mode may or may not be supported in the hardware or in the driver. This patch adds a "strict" flag that tells drivers to ensure that the requested mode will be honored. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-15ptp: Validate requests to enable time stamping of external signals.Richard Cochran
Commit 415606588c61 ("PTP: introduce new versions of IOCTLs") introduced a new external time stamp ioctl that validates the flags. This patch extends the validation to ensure that at least one rising or falling edge flag is set when enabling external time stamps. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12ptp: ptp_clockmatrix: Fix build errorYueHaibing
When do randbuilding, we got this warning: WARNING: unmet direct dependencies detected for PTP_1588_CLOCK Depends on [n]: NET [=y] && POSIX_TIMERS [=n] Selected by [y]: - PTP_1588_CLOCK_IDTCM [=y] Make PTP_1588_CLOCK_IDTCM depends on PTP_1588_CLOCK to fix this. Fixes: 3a6ba7dc7799 ("ptp: Add a ptp clock driver for IDT ClockMatrix.") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Vincent Cheng <vincent.cheng.xh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-06ptp: ptp_clockmatrix: Fix missing unlock on error in idtcm_probe()Wei Yongjun
Add the missing unlock before return from function idtcm_probe() in the error handling case. Fixes: 3a6ba7dc7799 ("ptp: Add a ptp clock driver for IDT ClockMatrix.") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Vincent Cheng <vincent.cheng.xh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-03ptp: Add a ptp clock driver for IDT ClockMatrix.Vincent Cheng
The IDT ClockMatrix (TM) family includes integrated devices that provide eight PLL channels. Each PLL channel can be independently configured as a frequency synthesizer, jitter attenuator, digitally controlled oscillator (DCO), or a digital phase lock loop (DPLL). Typically these devices are used as timing references and clock sources for PTP applications. This patch adds support for the device. Co-developed-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Vincent Cheng <vincent.cheng.xh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Several cases of overlapping changes which were for the most part trivially resolvable. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-10ptp: ptp_dte: use devm_platform_ioremap_resource() to simplify codeYueHaibing
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-07ptp: fix typo of "mechanism" in Kconfig help textAntonio Borneo
Fix typo s/mechansim/mechanism/ Signed-off-by: Antonio Borneo <antonio.borneo@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-28 13:25:56 +0000