summaryrefslogtreecommitdiff
path: root/drivers/ptp
AgeCommit message (Collapse)Author
2021-06-29ptp: Set lookup cookie when creating a PTP PPS source.Jonathan Lemon
When creating a PTP device, the configuration block allows creation of an associated PPS device. However, there isn't any way to associate the two devices after creation. Set the PPS cookie, so pps_lookup_dev(ptp) performs correctly. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Trivial conflicts in net/can/isotp.c and tools/testing/selftests/net/mptcp/mptcp_connect.sh scaled_ppm_to_ppb() was moved from drivers/ptp/ptp_clock.c to include/linux/ptp_clock_kernel.h in -next so re-apply the fix there. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-06-15ptp: improve max_adj check against unreasonable valuesJakub Kicinski
Scaled PPM conversion to PPB may (on 64bit systems) result in a value larger than s32 can hold (freq/scaled_ppm is a long). This means the kernel will not correctly reject unreasonably high ->freq values (e.g. > 4294967295ppb, 281474976645 scaled PPM). The conversion is equivalent to a division by ~66 (65.536), so the value of ppb is always smaller than ppm, but not small enough to assume narrowing the type from long -> s32 is okay. Note that reasonable user space (e.g. ptp4l) will not use such high values, anyway, 4289046510ppb ~= 4.3x, so the fix is somewhat pedantic. Fixes: d39a743511cd ("ptp: validate the requested frequency adjustment.") Fixes: d94ba80ebbea ("ptp: Added a brand new class driver for ptp clocks.") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
cdc-wdm: s/kill_urbs/poison_urbs/ to fix build Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-12ptp: ocp: Fix a resource leak in an error handling pathChristophe JAILLET
If an error occurs after a successful 'pci_ioremap_bar()' call, it must be undone by a corresponding 'pci_iounmap()' call, as already done in the remove function. Fixes: a7e1abad13f3 ("ptp: Add clock driver for the OpenCompute TimeCard.") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-10ptp: ptp_clock: make scaled_ppm_to_ppb static inlineRadu Pirea (NXP OSS)
Make scaled_ppm_to_ppb static inline to be able to build drivers that use this function even with PTP_1588_CLOCK disabled. Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-01Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm updates from Paolo Bonzini: "This is a large update by KVM standards, including AMD PSP (Platform Security Processor, aka "AMD Secure Technology") and ARM CoreSight (debug and trace) changes. ARM: - CoreSight: Add support for ETE and TRBE - Stage-2 isolation for the host kernel when running in protected mode - Guest SVE support when running in nVHE mode - Force W^X hypervisor mappings in nVHE mode - ITS save/restore for guests using direct injection with GICv4.1 - nVHE panics now produce readable backtraces - Guest support for PTP using the ptp_kvm driver - Performance improvements in the S2 fault handler x86: - AMD PSP driver changes - Optimizations and cleanup of nested SVM code - AMD: Support for virtual SPEC_CTRL - Optimizations of the new MMU code: fast invalidation, zap under read lock, enable/disably dirty page logging under read lock - /dev/kvm API for AMD SEV live migration (guest API coming soon) - support SEV virtual machines sharing the same encryption context - support SGX in virtual machines - add a few more statistics - improved directed yield heuristics - Lots and lots of cleanups Generic: - Rework of MMU notifier interface, simplifying and optimizing the architecture-specific code - a handful of "Get rid of oprofile leftovers" patches - Some selftests improvements" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (379 commits) KVM: selftests: Speed up set_memory_region_test selftests: kvm: Fix the check of return value KVM: x86: Take advantage of kvm_arch_dy_has_pending_interrupt() KVM: SVM: Skip SEV cache flush if no ASIDs have been used KVM: SVM: Remove an unnecessary prototype declaration of sev_flush_asids() KVM: SVM: Drop redundant svm_sev_enabled() helper KVM: SVM: Move SEV VMCB tracking allocation to sev.c KVM: SVM: Explicitly check max SEV ASID during sev_hardware_setup() KVM: SVM: Unconditionally invoke sev_hardware_teardown() KVM: SVM: Enable SEV/SEV-ES functionality by default (when supported) KVM: SVM: Condition sev_enabled and sev_es_enabled on CONFIG_KVM_AMD_SEV=y KVM: SVM: Append "_enabled" to module-scoped SEV/SEV-ES control variables KVM: SEV: Mask CPUID[0x8000001F].eax according to supported features KVM: SVM: Move SEV module params/variables to sev.c KVM: SVM: Disable SEV/SEV-ES if NPT is disabled KVM: SVM: Free sev_asid_bitmap during init if SEV setup fails KVM: SVM: Zero out the VMCB array used to track SEV ASID association x86/sev: Drop redundant and potentially misleading 'sev_enabled' KVM: x86: Move reverse CPUID helpers to separate header file KVM: x86: Rename GPR accessors to make mode-aware variants the defaults ...
2021-04-23Merge tag 'kvmarm-5.13' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 updates for Linux 5.13 New features: - Stage-2 isolation for the host kernel when running in protected mode - Guest SVE support when running in nVHE mode - Force W^X hypervisor mappings in nVHE mode - ITS save/restore for guests using direct injection with GICv4.1 - nVHE panics now produce readable backtraces - Guest support for PTP using the ptp_kvm driver - Performance improvements in the S2 fault handler - Alexandru is now a reviewer (not really a new feature...) Fixes: - Proper emulation of the GICR_TYPER register - Handle the complete set of relocation in the nVHE EL2 object - Get rid of the oprofile dependency in the PMU code (and of the oprofile body parts at the same time) - Debug and SPE fixes - Fix vcpu reset
2021-04-20ptp: Don't print an error if ptp_kvm is not supportedJon Hunter
Commit 300bb1fe7671 ("ptp: arm/arm64: Enable ptp_kvm for arm/arm64") enable ptp_kvm support for ARM platforms and for any ARM platform that does not support this, the following error message is displayed ... ERR KERN fail to initialize ptp_kvm For platforms that do not support ptp_kvm this error is a bit misleading and so fix this by only printing this message if the error returned by kvm_arch_ptp_init() is not -EOPNOTSUPP. Note that -EOPNOTSUPP is only returned by ARM platforms today if ptp_kvm is not supported. Fixes: 300bb1fe7671 ("ptp: arm/arm64: Enable ptp_kvm for arm/arm64") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210420132419.1318148-1-jonathanh@nvidia.com
2021-04-07ptp: arm/arm64: Enable ptp_kvm for arm/arm64Jianyong Wu
Currently, there is no mechanism to keep time sync between guest and host in arm/arm64 virtualization environment. Time in guest will drift compared with host after boot up as they may both use third party time sources to correct their time respectively. The time deviation will be in order of milliseconds. But in some scenarios,like in cloud environment, we ask for higher time precision. kvm ptp clock, which chooses the host clock source as a reference clock to sync time between guest and host, has been adopted by x86 which takes the time sync order from milliseconds to nanoseconds. This patch enables kvm ptp clock for arm/arm64 and improves clock sync precision significantly. Test result comparisons between with kvm ptp clock and without it in arm/arm64 are as follows. This test derived from the result of command 'chronyc sources'. we should take more care of the last sample column which shows the offset between the local clock and the source at the last measurement. no kvm ptp in guest: MS Name/IP address Stratum Poll Reach LastRx Last sample ======================================================================== ^* dns1.synet.edu.cn 2 6 377 13 +1040us[+1581us] +/- 21ms ^* dns1.synet.edu.cn 2 6 377 21 +1040us[+1581us] +/- 21ms ^* dns1.synet.edu.cn 2 6 377 29 +1040us[+1581us] +/- 21ms ^* dns1.synet.edu.cn 2 6 377 37 +1040us[+1581us] +/- 21ms ^* dns1.synet.edu.cn 2 6 377 45 +1040us[+1581us] +/- 21ms ^* dns1.synet.edu.cn 2 6 377 53 +1040us[+1581us] +/- 21ms ^* dns1.synet.edu.cn 2 6 377 61 +1040us[+1581us] +/- 21ms ^* dns1.synet.edu.cn 2 6 377 4 -130us[ +796us] +/- 21ms ^* dns1.synet.edu.cn 2 6 377 12 -130us[ +796us] +/- 21ms ^* dns1.synet.edu.cn 2 6 377 20 -130us[ +796us] +/- 21ms in host: MS Name/IP address Stratum Poll Reach LastRx Last sample ======================================================================== ^* 120.25.115.20 2 7 377 72 -470us[ -603us] +/- 18ms ^* 120.25.115.20 2 7 377 92 -470us[ -603us] +/- 18ms ^* 120.25.115.20 2 7 377 112 -470us[ -603us] +/- 18ms ^* 120.25.115.20 2 7 377 2 +872ns[-6808ns] +/- 17ms ^* 120.25.115.20 2 7 377 22 +872ns[-6808ns] +/- 17ms ^* 120.25.115.20 2 7 377 43 +872ns[-6808ns] +/- 17ms ^* 120.25.115.20 2 7 377 63 +872ns[-6808ns] +/- 17ms ^* 120.25.115.20 2 7 377 83 +872ns[-6808ns] +/- 17ms ^* 120.25.115.20 2 7 377 103 +872ns[-6808ns] +/- 17ms ^* 120.25.115.20 2 7 377 123 +872ns[-6808ns] +/- 17ms The dns1.synet.edu.cn is the network reference clock for guest and 120.25.115.20 is the network reference clock for host. we can't get the clock error between guest and host directly, but a roughly estimated value will be in order of hundreds of us to ms. with kvm ptp in guest: chrony has been disabled in host to remove the disturb by network clock. MS Name/IP address Stratum Poll Reach LastRx Last sample ======================================================================== * PHC0 0 3 377 8 -7ns[ +1ns] +/- 3ns * PHC0 0 3 377 8 +1ns[ +16ns] +/- 3ns * PHC0 0 3 377 6 -4ns[ -0ns] +/- 6ns * PHC0 0 3 377 6 -8ns[ -12ns] +/- 5ns * PHC0 0 3 377 5 +2ns[ +4ns] +/- 4ns * PHC0 0 3 377 13 +2ns[ +4ns] +/- 4ns * PHC0 0 3 377 12 -4ns[ -6ns] +/- 4ns * PHC0 0 3 377 11 -8ns[ -11ns] +/- 6ns * PHC0 0 3 377 10 -14ns[ -20ns] +/- 4ns * PHC0 0 3 377 8 +4ns[ +5ns] +/- 4ns The PHC0 is the ptp clock which choose the host clock as its source clock. So we can see that the clock difference between host and guest is in order of ns. Cc: Mark Rutland <mark.rutland@arm.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jianyong Wu <jianyong.wu@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20201209060932.212364-8-jianyong.wu@arm.com
2021-04-07ptp: Reorganize ptp_kvm.c to make it arch-independentJianyong Wu
Currently, the ptp_kvm module contains a lot of x86-specific code. Let's move this code into a new arch-specific file in the same directory, and rename the arch-independent file to ptp_kvm_common.c. Acked-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Jianyong Wu <jianyong.wu@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20201209060932.212364-4-jianyong.wu@arm.com
2021-03-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-24ptp_qoriq: fix overflow in ptp_qoriq_adjfine() u64 calcalationYangbo Lu
Current calculation for diff of TMR_ADD register value may have 64-bit overflow in this code line, when long type scaled_ppm is large. adj *= scaled_ppm; This patch is to resolve it by using mul_u64_u64_div_u64(). Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-12ptp: ptp_p: Demote non-conformant kernel-doc headers and supply a param ↵Lee Jones
description Fixes the following W=1 kernel build warning(s): drivers/ptp/ptp_pch.c:78: warning: Function parameter or member 'control' not described in 'pch_ts_regs' drivers/ptp/ptp_pch.c:78: warning: Function parameter or member 'event' not described in 'pch_ts_regs' drivers/ptp/ptp_pch.c:78: warning: Function parameter or member 'addend' not described in 'pch_ts_regs' drivers/ptp/ptp_pch.c:78: warning: Function parameter or member 'accum' not described in 'pch_ts_regs' drivers/ptp/ptp_pch.c:78: warning: Function parameter or member 'test' not described in 'pch_ts_regs' drivers/ptp/ptp_pch.c:78: warning: Function parameter or member 'ts_compare' not described in 'pch_ts_regs' drivers/ptp/ptp_pch.c:78: warning: Function parameter or member 'rsystime_lo' not described in 'pch_ts_regs' drivers/ptp/ptp_pch.c:78: warning: Function parameter or member 'rsystime_hi' not described in 'pch_ts_regs' drivers/ptp/ptp_pch.c:78: warning: Function parameter or member 'systime_lo' not described in 'pch_ts_regs' drivers/ptp/ptp_pch.c:78: warning: Function parameter or member 'systime_hi' not described in 'pch_ts_regs' drivers/ptp/ptp_pch.c:78: warning: Function parameter or member 'trgt_lo' not described in 'pch_ts_regs' drivers/ptp/ptp_pch.c:78: warning: Function parameter or member 'trgt_hi' not described in 'pch_ts_regs' drivers/ptp/ptp_pch.c:78: warning: Function parameter or member 'asms_lo' not described in 'pch_ts_regs' drivers/ptp/ptp_pch.c:78: warning: Function parameter or member 'asms_hi' not described in 'pch_ts_regs' drivers/ptp/ptp_pch.c:78: warning: Function parameter or member 'amms_lo' not described in 'pch_ts_regs' drivers/ptp/ptp_pch.c:78: warning: Function parameter or member 'amms_hi' not described in 'pch_ts_regs' drivers/ptp/ptp_pch.c:78: warning: Function parameter or member 'ch_control' not described in 'pch_ts_regs' drivers/ptp/ptp_pch.c:78: warning: Function parameter or member 'ch_event' not described in 'pch_ts_regs' drivers/ptp/ptp_pch.c:78: warning: Function parameter or member 'tx_snap_lo' not described in 'pch_ts_regs' drivers/ptp/ptp_pch.c:78: warning: Function parameter or member 'tx_snap_hi' not described in 'pch_ts_regs' drivers/ptp/ptp_pch.c:78: warning: Function parameter or member 'rx_snap_lo' not described in 'pch_ts_regs' drivers/ptp/ptp_pch.c:78: warning: Function parameter or member 'rx_snap_hi' not described in 'pch_ts_regs' drivers/ptp/ptp_pch.c:78: warning: Function parameter or member 'src_uuid_lo' not described in 'pch_ts_regs' drivers/ptp/ptp_pch.c:78: warning: Function parameter or member 'src_uuid_hi' not described in 'pch_ts_regs' drivers/ptp/ptp_pch.c:78: warning: Function parameter or member 'can_status' not described in 'pch_ts_regs' drivers/ptp/ptp_pch.c:78: warning: Function parameter or member 'can_snap_lo' not described in 'pch_ts_regs' drivers/ptp/ptp_pch.c:78: warning: Function parameter or member 'can_snap_hi' not described in 'pch_ts_regs' drivers/ptp/ptp_pch.c:78: warning: Function parameter or member 'ts_sel' not described in 'pch_ts_regs' drivers/ptp/ptp_pch.c:78: warning: Function parameter or member 'ts_st' not described in 'pch_ts_regs' drivers/ptp/ptp_pch.c:78: warning: Function parameter or member 'reserve1' not described in 'pch_ts_regs' drivers/ptp/ptp_pch.c:78: warning: Function parameter or member 'stl_max_set_en' not described in 'pch_ts_regs' drivers/ptp/ptp_pch.c:78: warning: Function parameter or member 'stl_max_set' not described in 'pch_ts_regs' drivers/ptp/ptp_pch.c:78: warning: Function parameter or member 'reserve2' not described in 'pch_ts_regs' drivers/ptp/ptp_pch.c:78: warning: Function parameter or member 'srst' not described in 'pch_ts_regs' drivers/ptp/ptp_pch.c:121: warning: Function parameter or member 'regs' not described in 'pch_dev' drivers/ptp/ptp_pch.c:121: warning: Function parameter or member 'ptp_clock' not described in 'pch_dev' drivers/ptp/ptp_pch.c:121: warning: Function parameter or member 'caps' not described in 'pch_dev' drivers/ptp/ptp_pch.c:121: warning: Function parameter or member 'exts0_enabled' not described in 'pch_dev' drivers/ptp/ptp_pch.c:121: warning: Function parameter or member 'exts1_enabled' not described in 'pch_dev' drivers/ptp/ptp_pch.c:121: warning: Function parameter or member 'mem_base' not described in 'pch_dev' drivers/ptp/ptp_pch.c:121: warning: Function parameter or member 'mem_size' not described in 'pch_dev' drivers/ptp/ptp_pch.c:121: warning: Function parameter or member 'irq' not described in 'pch_dev' drivers/ptp/ptp_pch.c:121: warning: Function parameter or member 'pdev' not described in 'pch_dev' drivers/ptp/ptp_pch.c:121: warning: Function parameter or member 'register_lock' not described in 'pch_dev' drivers/ptp/ptp_pch.c:128: warning: Function parameter or member 'station' not described in 'pch_params' drivers/ptp/ptp_pch.c:291: warning: Function parameter or member 'pdev' not described in 'pch_set_station_address' Cc: Richard Cochran <richardcochran@gmail.com> Cc: LAPIS SEMICONDUCTOR <tshimizu818@gmail.com> Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-12ptp: ptp_clockmatrix: Demote non-kernel-doc header to standard commentLee Jones
Fixes the following W=1 kernel build warning(s): drivers/ptp/ptp_clockmatrix.c:1408: warning: Cannot understand * @brief Maximum absolute value for write phase offset in picoseconds drivers/ptp/ptp_clockmatrix.c:1408: warning: Cannot understand * @brief Maximum absolute value for write phase offset in picoseconds drivers/ptp/ptp_clockmatrix.c:1408: warning: Cannot understand * @brief Maximum absolute value for write phase offset in picoseconds drivers/ptp/ptp_clockmatrix.c:1408: warning: Cannot understand * @brief Maximum absolute value for write phase offset in picoseconds drivers/ptp/ptp_clockmatrix.c:1408: warning: Cannot understand * @brief Maximum absolute value for write phase offset in picoseconds Cc: Richard Cochran <richardcochran@gmail.com> Cc: IDT-support-1588@lm.renesas.com Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-12ptp_pch: Move 'pch_*()' prototypes to shared headerLee Jones
Fixes the following W=1 kernel build warning(s): drivers/ptp/ptp_pch.c:193:6: warning: no previous prototype for ‘pch_ch_control_write’ [-Wmissing-prototypes] drivers/ptp/ptp_pch.c:201:5: warning: no previous prototype for ‘pch_ch_event_read’ [-Wmissing-prototypes] drivers/ptp/ptp_pch.c:212:6: warning: no previous prototype for ‘pch_ch_event_write’ [-Wmissing-prototypes] drivers/ptp/ptp_pch.c:220:5: warning: no previous prototype for ‘pch_src_uuid_lo_read’ [-Wmissing-prototypes] drivers/ptp/ptp_pch.c:231:5: warning: no previous prototype for ‘pch_src_uuid_hi_read’ [-Wmissing-prototypes] drivers/ptp/ptp_pch.c:242:5: warning: no previous prototype for ‘pch_rx_snap_read’ [-Wmissing-prototypes] drivers/ptp/ptp_pch.c:259:5: warning: no previous prototype for ‘pch_tx_snap_read’ [-Wmissing-prototypes] drivers/ptp/ptp_pch.c:300:5: warning: no previous prototype for ‘pch_set_station_address’ [-Wmissing-prototypes] Cc: Richard Cochran <richardcochran@gmail.com> (maintainer:PTP HARDWARE CLOCK SUPPORT) Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Flavio Suligoi <f.suligoi@asem.it> Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-12ptp_pch: Remove unused function 'pch_ch_control_read()'Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/ptp/ptp_pch.c:182:5: warning: no previous prototype for ‘pch_ch_control_read’ [-Wmissing-prototypes] Cc: Richard Cochran <richardcochran@gmail.com> (maintainer:PTP HARDWARE CLOCK SUPPORT) Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Flavio Suligoi <f.suligoi@asem.it> Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-17ptp: ptp_clockmatrix: clean-up - parenthesis around a == b are unnecessaryVincent Cheng
Code clean-up. Signed-off-by: Vincent Cheng <vincent.cheng.xh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-17ptp: ptp_clockmatrix: Simplify code - remove unnecessary `err` variable.Vincent Cheng
Code clean-up. Signed-off-by: Vincent Cheng <vincent.cheng.xh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-17ptp: ptp_clockmatrix: Coding style - tighten vertical spacing.Vincent Cheng
Code clean-up. * Remove blank line between variable declarations. * Remove blank line between: err = blah(...) if (err) ... * Remove unnecessary blank line before/after loop constructs. Signed-off-by: Vincent Cheng <vincent.cheng.xh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-17ptp: ptp_clockmatrix: Clean-up dev_*() messages.Vincent Cheng
Code clean-up. * Remove unnecessary \n termination from dev_*() messages. * Remove 'char *fmt' to define strings to stay within 80 column limit. Not needed since coding guidelines increased to 100 columns limit. Keeping format in place allows static code checkers to validate the arguments. * Tighten up vertical spacing. Signed-off-by: Vincent Cheng <vincent.cheng.xh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-17ptp: ptp_clockmatrix: Remove unused header declarations.Vincent Cheng
Removed unused header declarations. Signed-off-by: Vincent Cheng <vincent.cheng.xh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-17ptp: ptp_clockmatrix: Add alignment of 1 PPS to idtcm_perout_enable.Vincent Cheng
When enabling output using PTP_CLK_REQ_PEROUT, need to align the output clock to the internal 1 PPS clock. Signed-off-by: Vincent Cheng <vincent.cheng.xh@renesas.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-17ptp: ptp_clockmatrix: Add wait_for_sys_apll_dpll_lock.Vincent Cheng
Part of the device initialization aligns the rising edge of the output clock to the internal 1 PPS clock. If the system APLL and DPLL is not locked, then the alignment will fail and there will be a fixed offset between the internal 1 PPS clock and the output clock. After loading the device firmware, poll the system APLL and DPLL for locked state prior to initialization, timing out after 2 seconds. Signed-off-by: Vincent Cheng <vincent.cheng.xh@renesas.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-06ptp: ptp_ines: prevent build when HAS_IOMEM is not setRandy Dunlap
ptp_ines.c uses devm_platform_ioremap_resource(), which is only built/available when CONFIG_HAS_IOMEM is enabled. CONFIG_HAS_IOMEM is not enabled for arch/s390/, so builds on S390 have a build error: s390-linux-ld: drivers/ptp/ptp_ines.o: in function `ines_ptp_ctrl_probe': ptp_ines.c:(.text+0x17e6): undefined reference to `devm_platform_ioremap_resource' Prevent builds of ptp_ines.c when HAS_IOMEM is not set. Fixes: bad1eaa6ac31 ("ptp: Add a driver for InES time stamping IP core.") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Link: lore.kernel.org/r/202101031125.ZEFCUiKi-lkp@intel.com Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/20210106042531.1351-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-05phy: dp83640: select CONFIG_CRC32Arnd Bergmann
Without crc32, this driver fails to link: arm-linux-gnueabi-ld: drivers/net/phy/dp83640.o: in function `match': dp83640.c:(.text+0x476c): undefined reference to `crc32_le' Fixes: 539e44d26855 ("dp83640: Include hash in timestamp/packet matching") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-09ptp: clockmatrix: deprecate firmware older than 4.8.7Min Li
Add deprecated flag to indicate < v4.8.7. Fix idtcm_enable_tod() call correct settime(). Signed-off-by: Min Li <min.li.xe@renesas.com> Link: https://lore.kernel.org/r/1607442117-13661-4-git-send-email-min.li.xe@renesas.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-09ptp: clockmatrix: Fix non-zero phase_adj is lost after snapMin Li
Fix non-zero phase_adj is lost after snap. Use ktime_sub to do ktime_t subtraction. Signed-off-by: Min Li <min.li.xe@renesas.com> Link: https://lore.kernel.org/r/1607442117-13661-3-git-send-email-min.li.xe@renesas.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-09ptp: clockmatrix: remove 5 second delay before entering write phase modeMin Li
Remove write phase mode 5 second setup delay, not needed. Signed-off-by: Min Li <min.li.xe@renesas.com> Link: https://lore.kernel.org/r/1607442117-13661-2-git-send-email-min.li.xe@renesas.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-09ptp: clockmatrix: reset device and check BOOT_STATUSMin Li
SM_RESET device only when loading full configuration and check for BOOT_STATUS. Also remove polling for write trigger done in _idtcm_settime(). Changes since v1: -Correct warnings from strict checkpatch Signed-off-by: Min Li <min.li.xe@renesas.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/1607442117-13661-1-git-send-email-min.li.xe@renesas.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-05ptp: Add clock driver for the OpenCompute TimeCard.Jonathan Lemon
The OpenCompute time card is an atomic clock along with a GPS receiver that provides a Grandmaster clock source for a PTP enabled network. More information is available at http://www.timingcard.com/ Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/20201204035128.2219252-2-jonathan.lemon@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Trivial conflict in CAN, keep the net-next + the byteswap wrapper. Conflicts: drivers/net/can/usb/gs_usb.c Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-25ptp: clockmatrix: bug fix for idtcm_strverscmpMin Li
Feed kstrtou8 with NULL terminated string. Changes since v1: -Use sscanf to get rid of adhoc string parse. Changes since v2: -Check if sscanf returns 3. Fixes: 7ea5fda2b132 ("ptp: ptp_clockmatrix: update to support 4.8.7 firmware") Signed-off-by: Min Li <min.li.xe@renesas.com> Link: https://lore.kernel.org/r/1606273115-25792-1-git-send-email-min.li.xe@renesas.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-23ptp: ptp_ines: use new PTP_MSGTYPE_* define(s)Christian Eggers
Remove driver internal defines for this. Masking msgtype with 0xf is already done within ptp_get_msgtype(). Signed-off-by: Christian Eggers <ceggers@arri.de> Cc: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-07ptp: idt82p33: optimize _idt82p33_adjfineMin Li
Use div_s64 so that the neg_adj is not needed. Signed-off-by: Min Li <min.li.xe@renesas.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/1604634729-24960-3-git-send-email-min.li.xe@renesas.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-07ptp: idt82p33: use i2c_master_send for bus writeMin Li
Refactor idt82p33_xfer and use i2c_master_send for write operation. Because some I2C controllers are only working with single-burst write transaction. Signed-off-by: Min Li <min.li.xe@renesas.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/1604634729-24960-2-git-send-email-min.li.xe@renesas.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-07ptp: idt82p33: add adjphase supportMin Li
Add idt82p33_adjphase() to support PHC write phase mode. Signed-off-by: Min Li <min.li.xe@renesas.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/1604634729-24960-1-git-send-email-min.li.xe@renesas.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-18ptp_qoriq: support FIPER3Yangbo Lu
The FIPER3 (fixed interval period pulse generator) is supported on DPAA2 and ENETC network controller hardware. This patch is to support it in ptp_qoriq driver. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26ptp: ptp_ines: Remove redundant null checkXu Wang
Because kfree_skb already checked NULL skb parameter, so the additional check is unnecessary, just remove it. Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
2020-08-19ptp: ptp_clockmatrix: use i2c_master_send for i2c writeMin Li
The old code for i2c write would break on some controllers, which fails at handling Repeated Start Condition. So we will just use i2c_master_send to handle write in one transanction. Changes since v1: - Remove indentation change Signed-off-by: Min Li <min.li.xe@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-19ptp: ptp_ines: Use generic helper functionKurt Kanzenbach
In order to reduce code duplication between ptp drivers, generic helper functions were introduced. Use them. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-05ptp: only allow phase values lower than 1 periodVladimir Oltean
The way we define the phase (the difference between the time of the signal's rising edge, and the closest integer multiple of the period), it doesn't make sense to have a phase value equal or larger than 1 period. So deny these settings coming from the user. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-30ptp: ptp_clockmatrix: update to support 4.8.7 firmwareMin Li
With 4.8.7 firmware, adjtime can change delta instead of absolute time, which greately increases snap accuracy. PPS alignment doesn't have to be set for every single TOD change. Other minor changes includes: adding more debug logs, increasing snap accuracy for pre 4.8.7 firmware and supporting new tcs2bin format. Signed-off-by: Min Li <min.li.xe@renesas.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19ptp: add ability to configure duty cycle for periodic outputVladimir Oltean
There are external event timestampers (PHCs with support for PTP_EXTTS_REQUEST) that timestamp both event edges. When those edges are very close (such as in the case of a short pulse), there is a chance that the collected timestamp might be of the rising, or of the falling edge, we never know. There are also PHCs capable of generating periodic output with a configurable duty cycle. This is good news, because we can space the rising and falling edge out enough in time, that the risks to overrun the 1-entry timestamp FIFO of the extts PHC are lower (example: the perout PHC can be configured for a period of 1 second, and an "on" time of 0.5 seconds, resulting in a duty cycle of 50%). A flag is introduced for signaling that an on time is present in the perout request structure, for preserving compatibility. Logically speaking, the duty cycle cannot exceed 100% and the PTP core checks for this. PHC drivers that don't support this flag emit a periodic output of an unspecified duty cycle, same as before. The duty cycle is encoded as an "on" time, similar to the "start" and "period" times, and reuses the reserved space while preserving overall binary layout. Pahole reported before: struct ptp_perout_request { struct ptp_clock_time start; /* 0 16 */ struct ptp_clock_time period; /* 16 16 */ unsigned int index; /* 32 4 */ unsigned int flags; /* 36 4 */ unsigned int rsv[4]; /* 40 16 */ /* size: 56, cachelines: 1, members: 5 */ /* last cacheline: 56 bytes */ }; And now: struct ptp_perout_request { struct ptp_clock_time start; /* 0 16 */ struct ptp_clock_time period; /* 16 16 */ unsigned int index; /* 32 4 */ unsigned int flags; /* 36 4 */ union { struct ptp_clock_time on; /* 40 16 */ unsigned int rsv[4]; /* 40 16 */ }; /* 40 16 */ /* size: 56, cachelines: 1, members: 5 */ /* last cacheline: 56 bytes */ }; Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-25ptp_pch: use generic power managementVaibhav Gupta
With legacy PM, drivers themselves were responsible for managing the device's power states and takes care of register states. After upgrading to the generic structure, PCI core will take care of required tasks and drivers should do only device-specific operations. In the case of ptp_pch, after removing PCI helper functions, .suspend() and .resume() became empty-body functions. Hence, define them NULL and use dev_pm_ops. Compile-tested only. Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-05-25ptp_clock: Let the ADJ_OFFSET interface respect the ADJ_NANO flag for PHC ↵Richard Cochran
devices. In commit 184ecc9eb260d5a3bcdddc5bebd18f285ac004e9 ("ptp: Add adjphase function to support phase offset control.") the PTP Hardware Clock interface expanded to support the ADJ_OFFSET offset mode. However, the implementation did not respect the traditional yet pedantic distinction between units of microseconds and nanoseconds signaled by the ADJ_NANO flag. This patch fixes the issue by adding logic to handle that flag. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Vincent Cheng <vincent.cheng.xh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-02ptp: ptp_clockmatrix: Add adjphase() to support PHC write phase mode.Vincent Cheng
Add idtcm_adjphase() to support PHC write phase mode. Signed-off-by: Vincent Cheng <vincent.cheng.xh@renesas.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-02ptp: Add adjust_phase to ptp_clock_caps capability.Vincent Cheng
Add adjust_phase to ptp_clock_caps capability to allow user to query if a PHC driver supports adjust phase with ioctl PTP_CLOCK_GETCAPS command. Signed-off-by: Vincent Cheng <vincent.cheng.xh@renesas.com> Reviewed-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 22:53:23 +0000