summaryrefslogtreecommitdiff
path: root/drivers/ptp/Kconfig
AgeCommit message (Collapse)Author
2019-10-07ptp: fix typo of "mechanism" in Kconfig help textAntonio Borneo
Fix typo s/mechansim/mechanism/ Signed-off-by: Antonio Borneo <antonio.borneo@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-15ptp: add QorIQ PTP support for DPAA2Yangbo Lu
This patch is to add QorIQ PTP support for DPAA2. Although dpaa2-ptp.c driver is a fsl_mc_driver which is using MC APIs for register accessing, it's same IP block with eTSEC/DPAA/ENETC 1588 timer. We will convert to reuse ptp_qoriq driver by using register ioremap and dropping related MC APIs. Also allow to compile ptp_qoriq with COMPILE_TEST. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-12ptp: add QorIQ PTP support for ENETCYangbo Lu
This patch is to add QorIQ PTP support for ENETC. ENETC PTP driver which is a PCI driver for same 1588 timer IP block will reuse QorIQ PTP driver. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22ptp: add debugfs support for ptp_qoriqYangbo Lu
This patch is to add debugfs support for ptp_qoriq. Current debugfs supports to control fiper1/fiper2 loopback mode. If the loopback mode is enabled, the fiper1/fiper2 pulse is looped back into trigger1/ trigger2 input. This is very useful for validating hardware and driver without external hardware. Below is an example to enable fiper1 loopback. echo 1 > /sys/kernel/debug/2d10e00.ptp_clock/fiper1-loopback Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-26ptp: support DPAA FMan 1588 timer in ptp_qoriqYangbo Lu
This patch is to support DPAA (Data Path Acceleration Architecture) 1588 timer by adding "fsl,fman-ptp-timer" compatible, sharing interrupt with FMan, adding FSL_DPAA_ETH dependency, and fixing up register offset. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-28ptp: rework gianfar_ptp as QorIQ common PTP driverYangbo Lu
gianfar_ptp was the PTP clock driver for 1588 timer module of Freescale QorIQ eTSEC (Enhanced Three-Speed Ethernet Controllers) platforms. Actually QorIQ DPAA (Data Path Acceleration Architecture) platforms is also using the same 1588 timer module in hardware. This patch is to rework gianfar_ptp as QorIQ common PTP driver to support both DPAA and eTSEC. Moved gianfar_ptp.c to drivers/ptp/, renamed it as ptp_qoriq.c, and renamed many variables. There were not any function changes. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15ptp: Add a ptp clock driver for Broadcom DTEArun Parameswaran
This patch adds a ptp clock driver for the Broadcom SoCs using the Digital timing Engine (DTE) nco. Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-08PTP: add kvm PTP driverMarcelo Tosatti
Add a driver with gettime method returning hosts realtime clock. This allows Chrony to synchronize host and guest clocks with high precision (see results below). chronyc> sources MS Name/IP address Stratum Poll Reach LastRx Last sample =============================================================================== To configure Chronyd to use PHC refclock, add the following line to its configuration file: refclock PHC /dev/ptpX poll 3 dpoll -2 offset 0 Where /dev/ptpX is the kvmclock PTP clock. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-11-16posix-timers: Make them configurableNicolas Pitre
Some embedded systems have no use for them. This removes about 25KB from the kernel binary size when configured out. Corresponding syscalls are routed to a stub logging the attempt to use those syscalls which should be enough of a clue if they were disabled without proper consideration. They are: timer_create, timer_gettime: timer_getoverrun, timer_settime, timer_delete, clock_adjtime, setitimer, getitimer, alarm. The clock_settime, clock_gettime, clock_getres and clock_nanosleep syscalls are replaced by simple wrappers compatible with CLOCK_REALTIME, CLOCK_MONOTONIC and CLOCK_BOOTTIME only which should cover the vast majority of use cases with very little code. Signed-off-by: Nicolas Pitre <nico@linaro.org> Acked-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: John Stultz <john.stultz@linaro.org> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: linux-kbuild@vger.kernel.org Cc: netdev@vger.kernel.org Cc: Michal Marek <mmarek@suse.com> Cc: Edward Cree <ecree@solarflare.com> Link: http://lkml.kernel.org/r/1478841010-28605-7-git-send-email-nicolas.pitre@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-16ptp_clock: Allow for it to be optionalNicolas Pitre
In order to break the hard dependency between the PTP clock subsystem and ethernet drivers capable of being clock providers, this patch provides simple PTP stub functions to allow linkage of those drivers into the kernel even when the PTP subsystem is configured out. Drivers must be ready to accept NULL from ptp_clock_register() in that case. And to make it possible for PTP to be configured out, the select statement in those driver's Kconfig menu entries is converted to the new "imply" statement. This way the PTP subsystem may have Kconfig dependencies of its own, such as POSIX_TIMERS, without having to make those ethernet drivers unavailable if POSIX timers are cconfigured out. And when support for POSIX timers is selected again then the default config option for PTP clock support will automatically be adjusted accordingly. The pch_gbe driver is a bit special as it relies on extra code in drivers/ptp/ptp_pch.c. Therefore we let the make process descend into drivers/ptp/ even if PTP_1588_CLOCK is unselected. Signed-off-by: Nicolas Pitre <nico@linaro.org> Acked-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Edward Cree <ecree@solarflare.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: John Stultz <john.stultz@linaro.org> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: linux-kbuild@vger.kernel.org Cc: netdev@vger.kernel.org Cc: Michal Marek <mmarek@suse.com> Link: http://lkml.kernel.org/r/1478841010-28605-4-git-send-email-nicolas.pitre@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-06-17ptp: ptp_pch depends on x86_32Jean Delvare
The ptp_pch driver is for a companion chip to the Intel Atom E600 series processors. These are 32-bit x86 processors so the driver is only needed on X86_32. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Richard Cochran <richardcochran@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-12ptp: fix kconfig dependency warningsRandy Dunlap
Fix kconfig warnings: PTP_1588_CLOCK selects NET_PTP_CLASSIFY, which depends on NET, so PTP_1588_CLOCK should also depend on NET. PTP_1588_CLOCK_PCH selects PTP_1588_CLOCK so the former should depend on NET. warning: (IXP4XX_ETH && PTP_1588_CLOCK) selects NET_PTP_CLASSIFY which has unmet direct dependencies (NET) warning: (SFC && TILE_NET && BFIN_MAC_USE_HWSTAMP && TIGON3 && FEC && E1000E && IGB && IXGBE && I40E && MLX4_EN && SXGBE_ETH && STMMAC_ETH && TI_CPTS && PTP_1588_CLOCK_GIANFAR && PTP_1588_CLOCK_IXP46X && DP83640_PHY && PTP_1588_CLOCK_PCH) selects PTP_1588_CLOCK which has unmet direct dependencies (NET) [This warning is caused by the new 'depends on NET' in PTP_1588_CLOCK.] Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-01net: ptp: move PTP classifier in its own fileDaniel Borkmann
This commit fixes a build error reported by Fengguang, that is triggered when CONFIG_NETWORK_PHY_TIMESTAMPING is not set: ERROR: "ptp_classify_raw" [drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.ko] undefined! The fix is to introduce its own file for the PTP BPF classifier, so that PTP_1588_CLOCK and/or NETWORK_PHY_TIMESTAMPING can select it independently from each other. IXP4xx driver on ARM needs to select it as well since it does not seem to select PTP_1588_CLOCK or similar that would pull it in automatically. This also allows for hiding all of the internals of the BPF PTP program inside that file, and only exporting relevant API bits to drivers. This patch also adds a kdoc documentation of ptp_classify_raw() API to make it clear that it can return PTP_CLASS_* defines. Also, the BPF program has been translated into bpf_asm code, so that it can be more easily read and altered (extensively documented in [1]). In the kernel tree under tools/net/ we have bpf_asm and bpf_dbg tools, so the commented program can simply be translated via `./bpf_asm -c prog` where prog is a file that contains the commented code. This makes it easily readable/verifiable and when there's a need to change something, jump offsets etc do not need to be replaced manually which can be very error prone. Instead, a newly translated version via bpf_asm can simply replace the old code. I have checked opcode diffs before/after and it's the very same filter. [1] Documentation/networking/filter.txt Fixes: 164d8c666521 ("net: ptp: do not reimplement PTP/BPF classifier") Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Jiri Benc <jbenc@redhat.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-15ptp_pch: Add dependency on HAS_IOMEMRichard Weinberger
On archs like S390 or um this driver cannot build nor work. Make it depend on HAS_IOMEM to bypass build failures. drivers/ptp/ptp_pch.c: In function ‘pch_remove’: drivers/ptp/ptp_pch.c:571:3: error: implicit declaration of function ‘iounmap’ [-Werror=implicit-function-declaration] drivers/ptp/ptp_pch.c: In function ‘pch_probe’: drivers/ptp/ptp_pch.c:621:2: error: implicit declaration of function ‘ioremap’ [-Werror=implicit-function-declaration] Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24build some drivers only when compile-testingJiri Slaby
Some drivers can be built on more platforms than they run on. This is a burden for users and distributors who package a kernel. They have to manually deselect some (for them useless) drivers when updating their configs via oldconfig. And yet, sometimes it is even impossible to disable the drivers without patching the kernel. Introduce a new config option COMPILE_TEST and make all those drivers to depend on the platform they run on, or on the COMPILE_TEST option. Now, when users/distributors choose COMPILE_TEST=n they will not have the drivers in their allmodconfig setups, but developers still can compile-test them with COMPILE_TEST=y. Now the drivers where we use this new option: * PTP_1588_CLOCK_PCH: The PCH EG20T is only compatible with Intel Atom processors so it should depend on x86. * FB_GEODE: Geode is 32-bit only so only enable it for X86_32. * USB_CHIPIDEA_IMX: The OF_DEVICE dependency will be met on powerpc systems -- which do not actually support the hardware via that method. * INTEL_MID_PTI: It is specific to the Penwell type of Intel Atom device. [v2] * remove EXPERT dependency [gregkh - remove chipidea portion, as it's incorrect, and also doesn't apply to my driver-core tree] Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jeff Mahoney <jeffm@suse.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: linux-usb@vger.kernel.org Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: linux-geode@lists.infradead.org Cc: linux-fbdev@vger.kernel.org Cc: Richard Cochran <richardcochran@gmail.com> Cc: netdev@vger.kernel.org Cc: Ben Hutchings <ben@decadent.org.uk> Cc: "Keller, Jacob E" <jacob.e.keller@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-17pch_gbe, ptp_pch: Fix the dependency direction between these driversBen Hutchings
In commit a24006ed12616bde1bbdb26868495906a212d8dc ('ptp: Enable clock drivers along with associated net/PHY drivers') I wrongly made PTP_1588_CLOCK_PCH depend on PCH_GBE. The dependency is really the other way around. Therefore make PCH_GBE select PTP_1588_CLOCK_PCH and remove the 'default y' from the latter. Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01ptp: Enable clock drivers along with associated net/PHY driversBen Hutchings
Where a PTP clock driver is associated with a net or PHY driver, it should be enabled automatically whenever that driver is enabled. Therefore: - Make PTP clock drivers select rather than depending on PTP_1588_CLOCK - Remove separate boolean options for PTP clock drivers that are built as part of net driver modules. (This also fixes cases where the PTP subsystem is wrongly forced to be built-in.) - Set 'default y' for PTP clock drivers that depend on specific net drivers but are built separately Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01ptp: Make PTP_1588_CLOCK select rather than depend on PPSBen Hutchings
PTP hardware clock drivers that select PTP_1588_CLOCK must currently also select PPS. For those drivers that don't, the user must enable PPS, then enable PTP_1588_CLOCK, then the driver. Simplify things for developers and users by putting this selection in one place. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01pps, ptp: Remove dependencies on EXPERIMENTALBen Hutchings
These are now established subsystems, and we want drivers to be able to select PPS and PTP_1588_CLOCK without depending on EXPERIMENTAL. Further, the use of EXPERIMENTAL is now deprecated in general. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial updates from Jiri Kosina: "As usual, it's mostly typo fixes, redundant code elimination and some documentation updates." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (57 commits) edac, mips: don't change code that has been removed in edac/mips tree xtensa: Change mail addresses of Hannes Weiner and Oskar Schirmer lib: Change mail address of Oskar Schirmer net: Change mail address of Oskar Schirmer arm/m68k: Change mail address of Sebastian Hess i2c: Change mail address of Oskar Schirmer net: Fix tcp_build_and_update_options comment in struct tcp_sock atomic64_32.h: fix parameter naming mismatch Kconfig: replace "--- help ---" with "---help---" c2port: fix bogus Kconfig "default no" edac: Fix spelling errors. qla1280: Remove redundant NULL check before release_firmware() call remoteproc: remove redundant NULL check before release_firmware() qla2xxx: Remove redundant NULL check before release_firmware() call. aic94xx: Get rid of redundant NULL check before release_firmware() call tehuti: delete redundant NULL check before release_firmware() qlogic: get rid of a redundant test for NULL before call to release_firmware() bna: remove redundant NULL test before release_firmware() tg3: remove redundant NULL test before release_firmware() call typhoon: get rid of redundant conditional before all to release_firmware() ...
2012-04-21pch_gbe: correct receive time stamp filteringTakahiro Shimizu
This patch fixes the driver so that multicast PTP event messages can be recognized by the hardware time stamping unit. The station address register must be set according to the desired transport type. [ RC - Rebased Takahiro's changes and wrote a commit message explaining the changes. ] Signed-off-by: Takahiro Shimizu <tshimizu818@gmail.com> Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-16Fix typo in various Kconfig fileMasanari Iida
Correct spelling typo in various Kconfig file. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-09supports eg20t ptp clockTakahiro Shimizu
Supports EG20T ptp clock in the driver Changes e-mail address. Adds number. Signed-off-by: Takahiro Shimizu <tshimizu818@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-23ptp: Added a clock driver for the National Semiconductor PHYTER.Richard Cochran
This patch adds support for the PTP clock found on the DP83640. The basic clock operations and one external time stamp have been implemented. Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Signed-off-by: John Stultz <john.stultz@linaro.org>
2011-05-23ptp: Added a clock driver for the IXP46x.Richard Cochran
This patch adds a driver for the hardware time stamping unit found on the IXP465. The basic clock operations and an external trigger are implemented. Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: John Stultz <john.stultz@linaro.org> Acked-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: John Stultz <john.stultz@linaro.org>
2011-05-23ptp: Added a clock that uses the eTSEC found on the MPC85xx.Richard Cochran
The eTSEC includes a PTP clock with quite a few features. This patch adds support for the basic clock adjustment functions, plus two external time stamps, one alarm, and the PPS callback. Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: John Stultz <john.stultz@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org>
2011-05-23ptp: Added a brand new class driver for ptp clocks.Richard Cochran
This patch adds an infrastructure for hardware clocks that implement IEEE 1588, the Precision Time Protocol (PTP). A class driver offers a registration method to particular hardware clock drivers. Each clock is presented as a standard POSIX clock. The ancillary clock features are exposed in two different ways, via the sysfs and by a character device. Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: John Stultz <john.stultz@linaro.org>