summaryrefslogtreecommitdiff
path: root/drivers/powercap
AgeCommit message (Collapse)Author
2019-07-22powercap: Invoke powercap_init() and rapl_init() earlierZhang Rui
The MMIO RAPL interface driver depends on both powercap subsystem and the intel_rapl_common code. But when all of them are built-in, the MMIO RAPL interface driver can be loaded before the other two and this breaks the system during boot. Fix this by adjusting the init order of the powercap subsystem and the intel_rapl_common code, so that it can be initialized first. Fixes: 555c45fe0d04 ("int340X/processor_thermal_device: add support for MMIO RAPL") Reported-by: Kenneth R. Crudup <kenny@panix.com> Tested-by: Kenneth R. Crudup <kenny@panix.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> [ rjw: Subject & changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-11powercap/rapl: Add Ice Lake NNPI support to RAPL driverRajneesh Bhardwaj
Enables support for ICL-NNPI, which is a neural network processor for deep learning inference. From RAPL point of view it is same as Ice Lake Mobile processor. Link: https://lkml.org/lkml/2019/6/5/1034 Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-11powercap/intel_rapl: add support for ICX-DZhang Rui
Add ICX-D support in intel_rapl driver Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-11powercap/intel_rapl: add support for ICXZhang Rui
Add ICX support in intel_rapl driver Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-11powercap/intel_rapl: add support for IceLake desktopZhang Rui
Add IceLake desktop support in intel_rapl driver Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com> Signed-off-by: Joe Konno <joe.konno@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-11intel_rapl: Fix module autoloading issueZhang Rui
intel_rapl driver used to have a list of cpuids, which is used to 1. check if the processor support RAPL MSRs 2. do some cpu model specific setting 3. module autoloading Now, the cpu model specific setting are moved to intel_rapl_common.c as part of the common code, because the setup is also needed by RAPL MMIO interface on those platforms. But removing the cpuid list from intel_rapl MSR interface driver results in that the driver can not be loaded automatically. Maintaining another copy of the cpuid list in intel_rapl_msr.c does not make sense because it increases the complexity when enabling RAPL support on a new cpu model. Fix the problem by creating an "intel_rapl_msr" platform device in the common code, and make RAPL MSR interface driver (intel_rapl_msr.c) probe the platform device directly. Reviewed-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com> Tested-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-11intel_rapl: support two power limits for every RAPL domainZhang Rui
RAPL MSR interface supports 2 power limits for package domain, and 1 power limit for other domains, while RAPL MMIO interface supports 2 power limits for both package and dram domains. And when 2 power limits are supported, the FW_LOCK bit is in bit 63 of the register, instead of bit 31. Remove the assumption that only pakcage domain supports 2 power limits. And allow the RAPL interface driver to specify the number of power limits supported, for every single RAPL domain it owns.. Reviewed-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com> Tested-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-11intel_rapl: support 64 bit registerZhang Rui
RAPL MMIO interface uses 64 bit registers, thus force use 64 bit register for all the RAPL code. Reviewed-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com> Tested-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-11intel_rapl: abstract RAPL common codeZhang Rui
Split intel_rapl.c to intel_rapl_common.c and intel_rapl_msr.c, where intel_rapl_common.c contains the common code that can be used by both MSR and MMIO interface. intel_rapl_msr.c contains the implementation of RAPL MSR interface. Reviewed-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com> Tested-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-11intel_rapl: cleanup hardcoded MSR accessZhang Rui
There are still some places in the common code that have hardcoded MSR access, convert them to follow the abstracted register access. Reviewed-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com> Tested-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-11intel_rapl: cleanup some functionsZhang Rui
Previously, there are three functions: rapl_register_psys(), which registers platform rapl domain. rapl_register_powercap(), which registers powercap control type. rapl_unregsiter_powercap(), which unregisters platform rapl domain and powercap control type. This is confusing as the function name does not describe what it does clearly. With this patch, the three functions are removed, and two new functions rapl_register_platform_domain()/rapl_unregister_platform_domain() are introduced instead, and they do exactly what their function name describes. Plus, as part of the common code, hardcoded MSR accesses in these functions are converted to follow the abstracted register access. Reviewed-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com> Tested-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-11intel_rapl: abstract register access operationsZhang Rui
MSR and MMIO RAPL interfaces have different ways to access the registers, thus in order to abstract the register access operations, two callbacks, .read_raw()/.write_raw() are introduced, and they should be implemented by MSR RAPL and MMIO RAPL interface driver respectly. This patch implements them for the MSR I/F only. Reviewed-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com> Tested-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-11intel_rapl: abstract register addressZhang Rui
MSR and MMIO RAPL interface have different sets of registers, thus the RAPL register address should be obtained from interface specific structure, i.e. struct rapl_if_private, instead. Reviewed-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com> Tested-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-11intel_rapl: introduce struct rapl_if_privateZhang Rui
Introduce a new structure, rapl_if_private, to save the private data for different RAPL Interface. Reviewed-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com> Tested-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-11intel_rapl: introduce intel_rapl.hZhang Rui
Create a new header file for the common definitions that might be used by different RAPL Interface. Reviewed-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com> Tested-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-11intel_rapl: remove hardcoded register indexZhang Rui
enum rapl_domain_reg_id is defined for the RAPL registers for each RAPL domain, thus use it whenever possible. Reviewed-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com> Tested-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-11intel_rapl: use reg instead of msrZhang Rui
To support both MSR and MMIO Interface, use 'reg' to discribe RAPL registers instead of 'msr'. Reviewed-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com> Tested-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-08Merge branch 'x86-topology-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 topology updates from Ingo Molnar: "Implement multi-die topology support on Intel CPUs and expose the die topology to user-space tooling, by Len Brown, Kan Liang and Zhang Rui. These changes should have no effect on the kernel's existing understanding of topologies, i.e. there should be no behavioral impact on cache, NUMA, scheduler, perf and other topologies and overall system performance" * 'x86-topology-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/rapl: Cosmetic rename internal variables in response to multi-die/pkg support perf/x86/intel/uncore: Cosmetic renames in response to multi-die/pkg support hwmon/coretemp: Cosmetic: Rename internal variables to zones from packages thermal/x86_pkg_temp_thermal: Cosmetic: Rename internal variables to zones from packages perf/x86/intel/cstate: Support multi-die/package perf/x86/intel/rapl: Support multi-die/package perf/x86/intel/uncore: Support multi-die/package topology: Create core_cpus and die_cpus sysfs attributes topology: Create package_cpus sysfs attribute hwmon/coretemp: Support multi-die/package powercap/intel_rapl: Update RAPL domain name and debug messages thermal/x86_pkg_temp_thermal: Support multi-die/package powercap/intel_rapl: Support multi-die/package powercap/intel_rapl: Simplify rapl_find_package() x86/topology: Define topology_logical_die_id() x86/topology: Define topology_die_id() cpu/topology: Export die_id x86/topology: Create topology_max_die_per_package() x86/topology: Add CPUID.1F multi-die/package support
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 309Thomas Gleixner
Based on 2 normalized pattern(s): it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 11 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000434.249870634@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-23powercap/intel_rapl: Update RAPL domain name and debug messagesZhang Rui
The RAPL domain "name" attribute contains "Package-N", which is ambiguous on multi-die per-package systems. Update the name to "package-X-die-Y" on those systems. No change on systems without multi-die/package. Update driver debug messages. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@kernel.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: linux-pm@vger.kernel.org Link: https://lkml.kernel.org/r/6510b784e16374447965925588ec6e46d5d007d8.1557769318.git.len.brown@intel.com
2019-05-23powercap/intel_rapl: Support multi-die/packageZhang Rui
RAPL "package" domains are actually implemented in hardware per-die. Thus, the new multi-die/package systems have mulitple domains within each physical package. Update the intel_rapl driver to be "die aware" -- exporting multiple domains within a single package, when present. No change on single die/package systems. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@kernel.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: linux-pm@vger.kernel.org Link: https://lkml.kernel.org/r/9fcb4719aeb7efccf3bc75ed8dd559e46121649f.1557769318.git.len.brown@intel.com
2019-05-23powercap/intel_rapl: Simplify rapl_find_package()Zhang Rui
Simplify how the code to discover a package is called. Rename find_package_by_id() to rapl_find_package_domain() Syntax only, no functional or semantic change. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@kernel.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: linux-pm@vger.kernel.org Link: https://lkml.kernel.org/r/ae3d1903407fd6e3684234b674f4f0e62c2ab54c.1557769318.git.len.brown@intel.com
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-18powercap/intel_rapl: add Ice Lake mobileGayatri Kammela
Add Ice Lake mobile support to intel_rapl driver. Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com> Signed-off-by: Joe Konno <joe.konno@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-12powercap: intel_rapl: add support for JacobsvilleZhang Rui
Jacobsville RAPL interface is compatible with Core-based CPUs. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-23Merge branch 'perf-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Ingo Molnar: "The main updates in this cycle were: - Lots of perf tooling changes too voluminous to list (big perf trace and perf stat improvements, lots of libtraceevent reorganization, etc.), so I'll list the authors and refer to the changelog for details: Benjamin Peterson, Jérémie Galarneau, Kim Phillips, Peter Zijlstra, Ravi Bangoria, Sangwon Hong, Sean V Kelley, Steven Rostedt, Thomas Gleixner, Ding Xiang, Eduardo Habkost, Thomas Richter, Andi Kleen, Sanskriti Sharma, Adrian Hunter, Tzvetomir Stoyanov, Arnaldo Carvalho de Melo, Jiri Olsa. ... with the bulk of the changes written by Jiri Olsa, Tzvetomir Stoyanov and Arnaldo Carvalho de Melo. - Continued intel_rdt work with a focus on playing well with perf events. This also imported some non-perf RDT work due to dependencies. (Reinette Chatre) - Implement counter freezing for Arch Perfmon v4 (Skylake and newer). This allows to speed up the PMI handler by avoiding unnecessary MSR writes and make it more accurate. (Andi Kleen) - kprobes cleanups and simplification (Masami Hiramatsu) - Intel Goldmont PMU updates (Kan Liang) - ... plus misc other fixes and updates" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (155 commits) kprobes/x86: Use preempt_enable() in optimized_callback() x86/intel_rdt: Prevent pseudo-locking from using stale pointers kprobes, x86/ptrace.h: Make regs_get_kernel_stack_nth() not fault on bad stack perf/x86/intel: Export mem events only if there's PEBS support x86/cpu: Drop pointless static qualifier in punit_dev_state_show() x86/intel_rdt: Fix initial allocation to consider CDP x86/intel_rdt: CBM overlap should also check for overlap with CDP peer x86/intel_rdt: Introduce utility to obtain CDP peer tools lib traceevent, perf tools: Move struct tep_handler definition in a local header file tools lib traceevent: Separate out tep_strerror() for strerror_r() issues perf python: More portable way to make CFLAGS work with clang perf python: Make clang_has_option() work on Python 3 perf tools: Free temporary 'sys' string in read_event_files() perf tools: Avoid double free in read_event_file() perf tools: Free 'printk' string in parse_ftrace_printk() perf tools: Cleanup trace-event-info 'tdata' leak perf strbuf: Match va_{add,copy} with va_end perf test: S390 does not support watchpoints in test 22 perf auxtrace: Include missing asm/bitsperlong.h to get BITS_PER_LONG tools include: Adopt linux/bits.h ...
2018-10-02x86/cpu: Sanitize FAM6_ATOM namingPeter Zijlstra
Going primarily by: https://en.wikipedia.org/wiki/List_of_Intel_Atom_microprocessors with additional information gleaned from other related pages; notably: - Bonnell shrink was called Saltwell - Moorefield is the Merriefield refresh which makes it Airmont The general naming scheme is: FAM6_ATOM_UARCH_SOCTYPE for i in `git grep -l FAM6_ATOM` ; do sed -i -e 's/ATOM_PINEVIEW/ATOM_BONNELL/g' \ -e 's/ATOM_LINCROFT/ATOM_BONNELL_MID/' \ -e 's/ATOM_PENWELL/ATOM_SALTWELL_MID/g' \ -e 's/ATOM_CLOVERVIEW/ATOM_SALTWELL_TABLET/g' \ -e 's/ATOM_CEDARVIEW/ATOM_SALTWELL/g' \ -e 's/ATOM_SILVERMONT1/ATOM_SILVERMONT/g' \ -e 's/ATOM_SILVERMONT2/ATOM_SILVERMONT_X/g' \ -e 's/ATOM_MERRIFIELD/ATOM_SILVERMONT_MID/g' \ -e 's/ATOM_MOOREFIELD/ATOM_AIRMONT_MID/g' \ -e 's/ATOM_DENVERTON/ATOM_GOLDMONT_X/g' \ -e 's/ATOM_GEMINI_LAKE/ATOM_GOLDMONT_PLUS/g' ${i} done Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: dave.hansen@linux.intel.com Cc: len.brown@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-09-10powercap: RAPL: Get rid of custom RAPL_CPU() macroAndy Shevchenko
Replace custom grown macro with generic INTEL_CPU_FAM6() one. No functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-07-02powercap / idle_inject: Add an idle injection frameworkDaniel Lezcano
Initially, the cpu_cooling device for ARM was changed by adding a new policy inserting idle cycles. The intel_powerclamp driver does a similar action. Instead of implementing idle injections privately in the cpu_cooling device, move the idle injection code in a dedicated framework and give the opportunity to other frameworks to make use of it. The framework relies on the smpboot kthreads which handles via its main loop the common code for hotplugging and [un]parking. This code was previously tested with the cpu cooling device and went through several iterations. It results now in split code and API exported in the header file. It was tested with the cpu cooling device with success. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> [ rjw: Rewrite of all comments ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-03-19powercap: RAPL: Add support for Cannon LakeJoe Konno
RAPL MSRs and handling for Cannon Lake are similar to Sky Lake and Kaby Lake. Signed-off-by: Joe Konno <joe.konno@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-01-17powercap: intel_rapl: Fix trailing semicolonLuis de Bethencourt
The trailing semicolon is an empty statement that does no operation. Removing it since it doesn't do anything. Signed-off-by: Luis de Bethencourt <luisbg@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-01-10powercap: add suspend and resume mechanism for SOC power limitZhen Han
PL1 and PL2 could be throlled or de-throttled by Thermal management to control SOC temperature. However, currently, their value will be reset to default value after once system suspend and resume. Add pm_notifier to save PL1, PL2 before system suspect and restore PL1, PL2 after system resume. Signed-off-by: Zhen Han <zhen.han@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-12-07powercap: Simplify powercap_init()Arvind Yadav
Simplify powercap_init() by reducing the number of redundant assignments in it. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> [ rjw: Subject+changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-28powercap/RAPL: prevent overridding bits outside of the maskAdam Lessnau
Fixes wrong bits shift operation in the rapl_write_data_raw function, which might cause overridding bits outside of the mask. For example, writing new TIME_WINDOW1 value can override POWER_LIMIT1. Signed-off-by: Adam Lessnau <adam.lessnau@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-05-14PowerCap: Fix an error code in powercap_register_zone()Dan Carpenter
In the current code we accidentally return the successful result from idr_alloc() instead of a negative error pointer. The caller is looking for an error pointer and so it treats the returned value as a valid pointer. This one might be a bit serious because if it lets people get around the kernel's protection for remapping NULL. I'm not sure. Fixes: 75d2364ea0ca (PowerCap: Add class driver) Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-04-28powercap: intel_rapl: Add support for Gemini LakeDavid E. Box
Gemini Lake RAPL support is similar to Goldmont. Signed-off-by: David E. Box <david.e.box@linux.intel.com> Acked-by: Pan, Jacob jun <jacob.jun.pan@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-30powercap / RAPL: Add Knights Mill CPUIDPiotr Luc
Add Knights Mill (KNM) to the list of CPUIDs supported by intel_rapl Signed-off-by: Piotr Luc <piotr.luc@intel.com> Reviewed-by: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-29powercap/intel_rapl: fix and tidy up error handlingJacob Pan
Commit e1399ba20eee ("powercap / RAPL: handle missing MSRs") added contraint_to_pl() function to return index into an array. But it can potentially return -EINVAL if powercap layer sends an out of range constraint ID. This patch adds sanity check. Unnecessary RAPL domain pointer check is removed since it must be initialized before calling rapl_unit_xlate(). Fixes: e1399ba20eee ("powercap / RAPL: handle missing MSRs") Reported-by: Odzioba, Lukasz <lukasz.odzioba@intel.com> Reported-by: Koss, Marcin <marcin.koss@intel.com> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-24powercap/intel_rapl: Track active CPUs internallyThomas Gleixner
The ability of the CPU hotplug code to stop online/offline at each step makes it necessary to track the activated CPUs in a package directly, because outerwise a CPU offline callback can find CPUs which have already executed the offline callback, but are not yet marked offline in the topology mask. That could make such a CPU the package leader and in case that CPU goes fully offline leave the package lead orphaned. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-24powercap/intel_rapl: Cleanup duplicated init codeThomas Gleixner
The whole init/exit code is a duplicate of the cpuhotplug code. So we can just let the hotplug code do the actual work of setting up and tearing down the domains. This also restores the package hardware when a package is removed during hotplug instead of leaving it in the last configured state and only reset it when the driver is removed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-24powercap/intel rapl: Convert to hotplug state machineSebastian Andrzej Siewior
Install the callbacks via the state machine as a first step. The init/exit code is a duplicate of the hotplug code. This is cleaned up in a consecutive patch. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-24powercap/intel_rapl: Propagate error code when registration failsThomas Gleixner
If rapl_package_register_powercap() fails in rapl_add_package() the function happily returns 0. Capture the error code and propagate it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-24powercap/intel_rapl: Add missing domain data update on hotplugThomas Gleixner
The domain data of packages is only updated at init time, but new packages created by hotplug miss that treatment. Add it there and remove the global update at init time, because it's now obsolete. The more interesting question is why rapl_update_domain_data() exists at all as nothing ever uses that data. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-08x86/cpu: Rename Merrifield2 to MoorefieldAndy Shevchenko
Merrifield2 is actually Moorefield. Rename it accordingly and drop tail digit from Merrifield1. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20160906184254.94440-1-andriy.shevchenko@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-25powercap / RAPL: Add support for Ivy Bridge serverXiaolong Wang
It's confirmed that RAPL works as expected on Ivy Bridge servers. Tested against processor: Intel(R) Xeon(R) CPU E5-2697 v2 @2.70GHz Signed-off-by: Xiaolong Wang <xiaolong.wang@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-06-15powercap / RAPL: add support for DenvertonJacob Pan
Denverton micro server is Atom-based, but its RAPL interface is compatible with Core-based CPUs. Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-06-15Merge back earlier powercap material for v4.8.Rafael J. Wysocki
2016-06-15powercap / RAPL: handle missing MSRsJacob Pan
Some RAPL MSRs may not exist on some CPUs, we need to continue the topology detection and enumerate what is available. This patch handles the missing MSRs, then reports to the powercap layer only the features available. Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-06-10powercap / RAPL: reduce message loglevelJacob Pan
Since the RAPL interface is not architectual, its enumeration depends on poking MSRs instead of using the CPUID method. In KVM guests, the RAPL driver probe will fail and emit the following message for every CPU: "no valid rapl domains found in package" This patch converts the warning to a debug message only (still return -ENODEV so that RAPL does not run in KVM guests). Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> [ rjw: Subject & changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 13:08:46 +0000