summaryrefslogtreecommitdiff
path: root/drivers/powercap
AgeCommit message (Collapse)Author
2020-08-06Merge tag 'sched-fifo-2020-08-04' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull sched/fifo updates from Ingo Molnar: "This adds the sched_set_fifo*() encapsulation APIs to remove static priority level knowledge from non-scheduler code. The three APIs for non-scheduler code to set SCHED_FIFO are: - sched_set_fifo() - sched_set_fifo_low() - sched_set_normal() These are two FIFO priority levels: default (high), and a 'low' priority level, plus sched_set_normal() to set the policy back to non-SCHED_FIFO. Since the changes affect a lot of non-scheduler code, we kept this in a separate tree" * tag 'sched-fifo-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) sched,tracing: Convert to sched_set_fifo() sched: Remove sched_set_*() return value sched: Remove sched_setscheduler*() EXPORTs sched,psi: Convert to sched_set_fifo_low() sched,rcutorture: Convert to sched_set_fifo_low() sched,rcuperf: Convert to sched_set_fifo_low() sched,locktorture: Convert to sched_set_fifo() sched,irq: Convert to sched_set_fifo() sched,watchdog: Convert to sched_set_fifo() sched,serial: Convert to sched_set_fifo() sched,powerclamp: Convert to sched_set_fifo() sched,ion: Convert to sched_set_normal() sched,powercap: Convert to sched_set_fifo*() sched,spi: Convert to sched_set_fifo*() sched,mmc: Convert to sched_set_fifo*() sched,ivtv: Convert to sched_set_fifo*() sched,drm/scheduler: Convert to sched_set_fifo*() sched,msm: Convert to sched_set_fifo*() sched,psci: Convert to sched_set_fifo*() sched,drbd: Convert to sched_set_fifo*() ...
2020-07-27powercap: Add Power Limit4 supportSumeet Pawnikar
Modern Intel Mobile platforms support power limit4 (PL4), which is the SoC package level maximum power limit (in Watts). It can be used to preemptively limits potential SoC power to prevent power spikes from tripping the power adapter and battery over-current protection. This patch enables this feature by exposing package level peak power capping control to userspace via RAPL sysfs interface. With this, application like DTPF can modify PL4 power limit, the similar way of other package power limit (PL1). As this feature is not tested on previous generations, here it is enabled only for the platform that has been verified to work, for safety concerns. Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Co-developed-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-09powercap: idle_inject: Replace play_idle() with play_idle_precise() in commentsYangtao Li
After commit 333cff6c963fbc ("powercap/drivers/idle_inject: Specify idle state max latency"), we convert to use play_idle_precise() with max allowed latency to specify the idle state. Some function comments still use play_idle(), let's update it to play_idle_precise(). Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Frank Lee <frank@allwinnertech.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-06-30powercap: intel_rapl: add support for Sapphire RapidsZhang Rui
RAPL on SPR behaves similar to Haswell server, except that SPR uses a fixed energy unit (1 Joule) for the PSYS RAPL domain. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-06-15sched,powercap: Convert to sched_set_fifo*()Peter Zijlstra
Because SCHED_FIFO is a broken scheduler model (see previous patches) take away the priority field, the kernel can't possibly make an informed decision. Effectively no change. Cc: daniel.lezcano@linaro.org Cc: rafael.j.wysocki@intel.com Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Ingo Molnar <mingo@kernel.org>
2020-06-13Merge tag 'kbuild-v5.8-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - fix build rules in binderfs sample - fix build errors when Kbuild recurses to the top Makefile - covert '---help---' in Kconfig to 'help' * tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: treewide: replace '---help---' in Kconfig files with 'help' kbuild: fix broken builds because of GZIP,BZIP2,LZOP variables samples: binderfs: really compile this sample and fix build issues
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-12Merge tag 'thermal-v5.8-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal updates from Daniel Lezcano: - Add the hwmon support on the i.MX SC (Anson Huang) - Thermal framework cleanups (self-encapsulation, pointless stubs, private structures) (Daniel Lezcano) - Use the PM QoS frequency changes for the devfreq cooling device (Matthias Kaehlcke) - Remove duplicate error messages from platform_get_irq() error handling (Markus Elfring) - Add support for the bandgap sensors (Keerthy) - Statically initialize .get_mode/.set_mode ops (Andrzej Pietrasiewicz) - Add Renesas R-Car maintainer entry (Niklas Söderlund) - Fix error checking after calling ti_bandgap_get_sensor_data() for the TI SoC thermal (Sudip Mukherjee) - Add latency constraint for the idle injection, the DT binding and the change the registering function (Daniel Lezcano) - Convert the thermal framework binding to the Yaml schema (Amit Kucheria) - Replace zero-length array with flexible-array on i.MX 8MM (Gustavo A. R. Silva) - Thermal framework cleanups (alphabetic order for heads, replace module.h by export.h, make file naming consistent) (Amit Kucheria) - Merge tsens-common into the tsens driver (Amit Kucheria) - Fix platform dependency for the Qoriq driver (Geert Uytterhoeven) - Clean up the rcar_thermal_update_temp() function in the rcar thermal driver (Niklas Söderlund) - Fix the TMSAR register for the TMUv2 on the Qoriq platform (Yuantian Tang) - Export GDDV, OEM vendor variables, and don't require IDSP for the int340x thermal driver - trivial conflicts fixed (Matthew Garrett) * tag 'thermal-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (48 commits) thermal/int340x_thermal: Don't require IDSP to exist thermal/int340x_thermal: Export OEM vendor variables thermal/int340x_thermal: Export GDDV thermal: qoriq: Update the settings for TMUv2 thermal: rcar_thermal: Clean up rcar_thermal_update_temp() thermal: qoriq: Add platform dependencies drivers: thermal: tsens: Merge tsens-common.c into tsens.c thermal/of: Rename of-thermal.c thermal/governors: Prefix all source files with gov_ thermal/drivers/user_space: Sort headers alphabetically thermal/drivers/of-thermal: Sort headers alphabetically thermal/drivers/cpufreq_cooling: Replace module.h with export.h thermal/drivers/cpufreq_cooling: Sort headers alphabetically thermal/drivers/clock_cooling: Include export.h thermal/drivers/clock_cooling: Sort headers alphabetically thermal/drivers/thermal_hwmon: Include export.h thermal/drivers/thermal_hwmon: Sort headers alphabetically thermal/drivers/thermal_helpers: Include export.h thermal/drivers/thermal_helpers: Sort headers alphabetically thermal/core: Replace module.h with export.h ...
2020-05-25powercap: RAPL: remove unused local MSR defineSumeet Pawnikar
Remove unused PLATFORM_POWER_LIMIT MSR local definition from file intel_rapl_common.c. This was missed while splitting old RAPL code intel_rapl.c file into two new files intel_rapl_msr.c and intel_rapl_common.c as per the commit 3382388d7148 ("intel_rapl: abstract RAPL common code"). Currently, this #define entry is being used only in intel_rapl_msr.c file and local definition present in this file. Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-19powercap/drivers/idle_inject: Specify idle state max latencyDaniel Lezcano
Currently the idle injection framework uses the play_idle() function which puts the current CPU in an idle state. The idle state is the deepest one, as specified by the latency constraint when calling the subsequent play_idle_precise() function with the INT_MAX. The idle_injection is used by the cpuidle_cooling device which computes the idle / run duration to mitigate the temperature by injecting idle cycles. The cooling device has no control on the depth of the idle state. Allow finer control of the idle injection mechanism by allowing to specify the latency for the idle state. Thus the cooling device has the ability to have a guarantee on the exit latency of the idle states it is injecting. Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Link: https://lore.kernel.org/r/20200429103644.5492-1-daniel.lezcano@linaro.org
2020-05-15powercap/intel_rapl: add support for ElkhartLakeJacob Pan
Add intel_rapl support for ElkhartLake platform. Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-03-30Merge branch 'perf-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Ingo Molnar: "The main changes in this cycle were: Kernel side changes: - A couple of x86/cpu cleanups and changes were grandfathered in due to patch dependencies. These clean up the set of CPU model/family matching macros with a consistent namespace and C99 initializer style. - A bunch of updates to various low level PMU drivers: * AMD Family 19h L3 uncore PMU * Intel Tiger Lake uncore support * misc fixes to LBR TOS sampling - optprobe fixes - perf/cgroup: optimize cgroup event sched-in processing - misc cleanups and fixes Tooling side changes are to: - perf {annotate,expr,record,report,stat,test} - perl scripting - libapi, libperf and libtraceevent - vendor events on Intel and S390, ARM cs-etm - Intel PT updates - Documentation changes and updates to core facilities - misc cleanups, fixes and other enhancements" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (89 commits) cpufreq/intel_pstate: Fix wrong macro conversion x86/cpu: Cleanup the now unused CPU match macros hwrng: via_rng: Convert to new X86 CPU match macros crypto: Convert to new CPU match macros ASoC: Intel: Convert to new X86 CPU match macros powercap/intel_rapl: Convert to new X86 CPU match macros PCI: intel-mid: Convert to new X86 CPU match macros mmc: sdhci-acpi: Convert to new X86 CPU match macros intel_idle: Convert to new X86 CPU match macros extcon: axp288: Convert to new X86 CPU match macros thermal: Convert to new X86 CPU match macros hwmon: Convert to new X86 CPU match macros platform/x86: Convert to new CPU match macros EDAC: Convert to new X86 CPU match macros cpufreq: Convert to new X86 CPU match macros ACPI: Convert to new X86 CPU match macros x86/platform: Convert to new CPU match macros x86/kernel: Convert to new CPU match macros x86/kvm: Convert to new CPU match macros x86/perf/events: Convert to new CPU match macros ...
2020-03-24powercap/intel_rapl: Convert to new X86 CPU match macrosThomas Gleixner
The new macro set has a consistent namespace and uses C99 initializers instead of the grufty C89 ones. Get rid the of the local macro wrappers for consistency. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lkml.kernel.org/r/20200320131510.501728797@linutronix.de
2020-03-04powercap: idle_inject: Replace zero-length array with flexible-array memberGustavo A. R. Silva
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] Lastly, fix the following checkpatch warning: WARNING: Prefer 'unsigned long' over 'unsigned long int' as the int is unnecessary + unsigned long int cpumask[]; This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-01-13Merge back power capping changes for v5.6.Rafael J. Wysocki
2020-01-07powercap: intel_rapl: add NULL pointer check to rapl_mmio_cpu_online()Harry Pan
RAPL MMIO support depends on the RAPL common driver. During CPU initialization rapl_mmio_cpu_online() is called via CPU hotplug to initialize the MMIO RAPL for the new CPU, but if that CPU is not present in the common RAPL driver's support list, rapl_defaults is NULL and the kernel crashes on an attempt to dereference it: [ 4.188566] BUG: kernel NULL pointer dereference, address: 0000000000000020 ...snip... [ 4.189555] RIP: 0010:rapl_add_package+0x223/0x574 [ 4.189555] Code: b5 a0 31 c0 49 8b 4d 78 48 01 d9 48 8b 0c c1 49 89 4c c6 10 48 ff c0 48 83 f8 05 75 e7 49 83 ff 03 75 15 48 8b 05 09 bc 18 01 <8b> 70 20 41 89 b6 0c 05 00 00 85 f6 75 1a 49 81 c6 18 9 [ 4.189555] RSP: 0000:ffffb3adc00b3d90 EFLAGS: 00010246 [ 4.189555] RAX: 0000000000000000 RBX: 0000000000000098 RCX: 0000000000000000 [ 4.267161] usb 1-1: New USB device found, idVendor=2109, idProduct=2812, bcdDevice= b.e0 [ 4.189555] RDX: 0000000000001000 RSI: 0000000000000000 RDI: ffff9340caafd000 [ 4.189555] RBP: ffffb3adc00b3df8 R08: ffffffffa0246e28 R09: ffff9340caafc000 [ 4.189555] R10: 000000000000024a R11: ffffffff9ff1f6f2 R12: 00000000ffffffed [ 4.189555] R13: ffff9340caa94800 R14: ffff9340caafc518 R15: 0000000000000003 [ 4.189555] FS: 0000000000000000(0000) GS:ffff9340ce200000(0000) knlGS:0000000000000000 [ 4.189555] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4.189555] CR2: 0000000000000020 CR3: 0000000302c14001 CR4: 00000000003606f0 [ 4.189555] Call Trace: [ 4.189555] ? __switch_to_asm+0x40/0x70 [ 4.189555] rapl_mmio_cpu_online+0x47/0x64 [ 4.189555] ? rapl_mmio_write_raw+0x33/0x33 [ 4.281059] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.189555] cpuhp_invoke_callback+0x29f/0x66f [ 4.189555] ? __schedule+0x46d/0x6a0 [ 4.189555] cpuhp_thread_fun+0xb9/0x11c [ 4.189555] smpboot_thread_fn+0x17d/0x22f [ 4.297006] usb 1-1: Product: USB2.0 Hub [ 4.189555] ? cpu_report_death+0x43/0x43 [ 4.189555] kthread+0x137/0x13f [ 4.189555] ? cpu_report_death+0x43/0x43 [ 4.189555] ? kthread_blkcg+0x2e/0x2e [ 4.312951] usb 1-1: Manufacturer: VIA Labs, Inc. [ 4.189555] ret_from_fork+0x1f/0x40 [ 4.189555] Modules linked in: [ 4.189555] CR2: 0000000000000020 [ 4.189555] ---[ end trace 01bb812aabc791f4 ]--- To avoid that problem, check rapl_defaults NULL upfront and return an error code if it is NULL. [Note that it does not make sense to even try to allocate memory in that case, because it is not going to be used anyway.] Fixes: 555c45fe0d04 ("int340X/processor_thermal_device: add support for MMIO RAPL") Cc: 5.3+ <stable@vger.kernel.org> # 5.3+ Signed-off-by: Harry Pan <harry.pan@intel.com> [ rjw: Subject & changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-20powercap/intel_rapl: add support for JasperLakeZhang Rui
Add intel_rapl support for Jasper Lake. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-17powercap/intel_rapl: add support for TigerLake MobileZhang Rui
Add TigerLake Mobile support in intel_rapl driver. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-11-04powercap/intel_rapl: add support for Cometlake desktopZhang Rui
Add CometLake desktop support in intel_rapl driver Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-11-04powercap/intel_rapl: add support for CometLake MobileZhang Rui
Add CometLake Mobile support in intel_rapl driver Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-09-17Merge tag 'pm-5.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These include a rework of the main suspend-to-idle code flow (related to the handling of spurious wakeups), a switch over of several users of cpufreq notifiers to QoS-based limits, a new devfreq driver for Tegra20, a new cpuidle driver and governor for virtualized guests, an extension of the wakeup sources framework to expose wakeup sources as device objects in sysfs, and more. Specifics: - Rework the main suspend-to-idle control flow to avoid repeating "noirq" device resume and suspend operations in case of spurious wakeups from the ACPI EC and decouple the ACPI EC wakeups support from the LPS0 _DSM support (Rafael Wysocki). - Extend the wakeup sources framework to expose wakeup sources as device objects in sysfs (Tri Vo, Stephen Boyd). - Expose system suspend statistics in sysfs (Kalesh Singh). - Introduce a new haltpoll cpuidle driver and a new matching governor for virtualized guests wanting to do guest-side polling in the idle loop (Marcelo Tosatti, Joao Martins, Wanpeng Li, Stephen Rothwell). - Fix the menu and teo cpuidle governors to allow the scheduler tick to be stopped if PM QoS is used to limit the CPU idle state exit latency in some cases (Rafael Wysocki). - Increase the resolution of the play_idle() argument to microseconds for more fine-grained injection of CPU idle cycles (Daniel Lezcano). - Switch over some users of cpuidle notifiers to the new QoS-based frequency limits and drop the CPUFREQ_ADJUST and CPUFREQ_NOTIFY policy notifier events (Viresh Kumar). - Add new cpufreq driver based on nvmem for sun50i (Yangtao Li). - Add support for MT8183 and MT8516 to the mediatek cpufreq driver (Andrew-sh.Cheng, Fabien Parent). - Add i.MX8MN support to the imx-cpufreq-dt cpufreq driver (Anson Huang). - Add qcs404 to cpufreq-dt-platdev blacklist (Jorge Ramirez-Ortiz). - Update the qcom cpufreq driver (among other things, to make it easier to extend and to use kryo cpufreq for other nvmem-based SoCs) and add qcs404 support to it (Niklas Cassel, Douglas RAILLARD, Sibi Sankar, Sricharan R). - Fix assorted issues and make assorted minor improvements in the cpufreq code (Colin Ian King, Douglas RAILLARD, Florian Fainelli, Gustavo Silva, Hariprasad Kelam). - Add new devfreq driver for NVidia Tegra20 (Dmitry Osipenko, Arnd Bergmann). - Add new Exynos PPMU events to devfreq events and extend that mechanism (Lukasz Luba). - Fix and clean up the exynos-bus devfreq driver (Kamil Konieczny). - Improve devfreq documentation and governor code, fix spelling typos in devfreq (Ezequiel Garcia, Krzysztof Kozlowski, Leonard Crestez, MyungJoo Ham, Gaël PORTAY). - Add regulators enable and disable to the OPP (operating performance points) framework (Kamil Konieczny). - Update the OPP framework to support multiple opp-suspend properties (Anson Huang). - Fix assorted issues and make assorted minor improvements in the OPP code (Niklas Cassel, Viresh Kumar, Yue Hu). - Clean up the generic power domains (genpd) framework (Ulf Hansson). - Clean up assorted pieces of power management code and documentation (Akinobu Mita, Amit Kucheria, Chuhong Yuan). - Update the pm-graph tool to version 5.5 including multiple fixes and improvements (Todd Brandt). - Update the cpupower utility (Benjamin Weis, Geert Uytterhoeven, Sébastien Szymanski)" * tag 'pm-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (126 commits) cpuidle-haltpoll: Enable kvm guest polling when dedicated physical CPUs are available cpuidle-haltpoll: do not set an owner to allow modunload cpuidle-haltpoll: return -ENODEV on modinit failure cpuidle-haltpoll: set haltpoll as preferred governor cpuidle: allow governor switch on cpuidle_register_driver() PM: runtime: Documentation: add runtime_status ABI document pm-graph: make setVal unbuffered again for python2 and python3 powercap: idle_inject: Use higher resolution for idle injection cpuidle: play_idle: Increase the resolution to usec cpuidle-haltpoll: vcpu hotplug support cpufreq: Add qcs404 to cpufreq-dt-platdev blacklist cpufreq: qcom: Add support for qcs404 on nvmem driver cpufreq: qcom: Refactor the driver to make it easier to extend cpufreq: qcom: Re-organise kryo cpufreq to use it for other nvmem based qcom socs dt-bindings: opp: Add qcom-opp bindings with properties needed for CPR dt-bindings: opp: qcom-nvmem: Support pstates provided by a power domain Documentation: cpufreq: Update policy notifier documentation cpufreq: Remove CPUFREQ_ADJUST and CPUFREQ_NOTIFY policy notifier events PM / Domains: Verify PM domain type in dev_pm_genpd_set_performance_state() PM / Domains: Simplify genpd_lookup_dev() ...
2019-09-03powercap: idle_inject: Use higher resolution for idle injectionDaniel Lezcano
The resolution of the idle injection is limited to 1ms. If there is a need for an injection of 1.2 ms, it is not possible. The idle injection API is not yet used, so it is safe to convert the existing API to the new time unit instead of adding more functions. Convert to microsecond in order to use a finer grain time unit when injecting idle cycles. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-09-03cpuidle: play_idle: Increase the resolution to usecDaniel Lezcano
The play_idle resolution is 1ms. The intel_powerclamp bases the idle duration on jiffies. The idle injection API is also using msec based duration but has no user yet. Unfortunately, msec based time does not fit well when we want to inject idle cycle precisely with shallow idle state. In order to set the scene for the incoming idle injection user, move the precision up to usec when calling play_idle. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-28x86/intel: Aggregate microserver namingPeter Zijlstra
Currently big microservers have _XEON_D while small microservers have _X, Make it uniformly: _D. for i in `git grep -l "\(INTEL_FAM6_\|VULNWL_INTEL\|INTEL_CPU_FAM6\).*_\(X\|XEON_D\)"` do sed -i -e 's/\(\(INTEL_FAM6_\|VULNWL_INTEL\|INTEL_CPU_FAM6\).*ATOM.*\)_X/\1_D/g' \ -e 's/\(\(INTEL_FAM6_\|VULNWL_INTEL\|INTEL_CPU_FAM6\).*\)_XEON_D/\1_D/g' ${i} done Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Tony Luck <tony.luck@intel.com> Cc: x86@kernel.org Cc: Dave Hansen <dave.hansen@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Link: https://lkml.kernel.org/r/20190827195122.677152989@infradead.org
2019-08-28x86/intel: Aggregate big core graphics namingPeter Zijlstra
Currently big core clients with extra graphics on have: - _G - _GT3E Make it uniformly: _G for i in `git grep -l "\(INTEL_FAM6_\|VULNWL_INTEL\|INTEL_CPU_FAM6\).*_GT3E"` do sed -i -e 's/\(\(INTEL_FAM6_\|VULNWL_INTEL\|INTEL_CPU_FAM6\).*\)_GT3E/\1_G/g' ${i} done Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Tony Luck <tony.luck@intel.com> Cc: x86@kernel.org Cc: Dave Hansen <dave.hansen@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Link: https://lkml.kernel.org/r/20190827195122.622802314@infradead.org
2019-08-28x86/intel: Aggregate big core mobile namingPeter Zijlstra
Currently big core mobile chips have either: - _L - _ULT - _MOBILE Make it uniformly: _L. for i in `git grep -l "\(INTEL_FAM6_\|VULNWL_INTEL\|INTEL_CPU_FAM6\).*_\(MOBILE\|ULT\)"` do sed -i -e 's/\(\(INTEL_FAM6_\|VULNWL_INTEL\|INTEL_CPU_FAM6\).*\)_\(MOBILE\|ULT\)/\1_L/g' ${i} done Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Tony Luck <tony.luck@intel.com> Cc: x86@kernel.org Cc: Dave Hansen <dave.hansen@intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190827195122.568978530@infradead.org
2019-08-28x86/intel: Aggregate big core client namingPeter Zijlstra
Currently the big core client models either have: - no OPTDIFF - _CORE - _DESKTOP Make it uniformly: 'no OPTDIFF'. for i in `git grep -l "\(INTEL_FAM6_\|VULNWL_INTEL\|INTEL_CPU_FAM6\).*_\(CORE\|DESKTOP\)"` do sed -i -e 's/\(\(INTEL_FAM6_\|VULNWL_INTEL\|INTEL_CPU_FAM6\).*\)_\(CORE\|DESKTOP\)/\1/g' ${i} done Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Tony Luck <tony.luck@intel.com> Cc: x86@kernel.org Cc: Dave Hansen <dave.hansen@intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190827195122.513945586@infradead.org
2019-07-22powercap: Invoke powercap_init() and rapl_init() earlierZhang Rui
The MMIO RAPL interface driver depends on both powercap subsystem and the intel_rapl_common code. But when all of them are built-in, the MMIO RAPL interface driver can be loaded before the other two and this breaks the system during boot. Fix this by adjusting the init order of the powercap subsystem and the intel_rapl_common code, so that it can be initialized first. Fixes: 555c45fe0d04 ("int340X/processor_thermal_device: add support for MMIO RAPL") Reported-by: Kenneth R. Crudup <kenny@panix.com> Tested-by: Kenneth R. Crudup <kenny@panix.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> [ rjw: Subject & changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-11powercap/rapl: Add Ice Lake NNPI support to RAPL driverRajneesh Bhardwaj
Enables support for ICL-NNPI, which is a neural network processor for deep learning inference. From RAPL point of view it is same as Ice Lake Mobile processor. Link: https://lkml.org/lkml/2019/6/5/1034 Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-11powercap/intel_rapl: add support for ICX-DZhang Rui
Add ICX-D support in intel_rapl driver Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-11powercap/intel_rapl: add support for ICXZhang Rui
Add ICX support in intel_rapl driver Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-11powercap/intel_rapl: add support for IceLake desktopZhang Rui
Add IceLake desktop support in intel_rapl driver Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com> Signed-off-by: Joe Konno <joe.konno@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-11intel_rapl: Fix module autoloading issueZhang Rui
intel_rapl driver used to have a list of cpuids, which is used to 1. check if the processor support RAPL MSRs 2. do some cpu model specific setting 3. module autoloading Now, the cpu model specific setting are moved to intel_rapl_common.c as part of the common code, because the setup is also needed by RAPL MMIO interface on those platforms. But removing the cpuid list from intel_rapl MSR interface driver results in that the driver can not be loaded automatically. Maintaining another copy of the cpuid list in intel_rapl_msr.c does not make sense because it increases the complexity when enabling RAPL support on a new cpu model. Fix the problem by creating an "intel_rapl_msr" platform device in the common code, and make RAPL MSR interface driver (intel_rapl_msr.c) probe the platform device directly. Reviewed-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com> Tested-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-11intel_rapl: support two power limits for every RAPL domainZhang Rui
RAPL MSR interface supports 2 power limits for package domain, and 1 power limit for other domains, while RAPL MMIO interface supports 2 power limits for both package and dram domains. And when 2 power limits are supported, the FW_LOCK bit is in bit 63 of the register, instead of bit 31. Remove the assumption that only pakcage domain supports 2 power limits. And allow the RAPL interface driver to specify the number of power limits supported, for every single RAPL domain it owns.. Reviewed-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com> Tested-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-11intel_rapl: support 64 bit registerZhang Rui
RAPL MMIO interface uses 64 bit registers, thus force use 64 bit register for all the RAPL code. Reviewed-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com> Tested-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-11intel_rapl: abstract RAPL common codeZhang Rui
Split intel_rapl.c to intel_rapl_common.c and intel_rapl_msr.c, where intel_rapl_common.c contains the common code that can be used by both MSR and MMIO interface. intel_rapl_msr.c contains the implementation of RAPL MSR interface. Reviewed-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com> Tested-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-11intel_rapl: cleanup hardcoded MSR accessZhang Rui
There are still some places in the common code that have hardcoded MSR access, convert them to follow the abstracted register access. Reviewed-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com> Tested-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-11intel_rapl: cleanup some functionsZhang Rui
Previously, there are three functions: rapl_register_psys(), which registers platform rapl domain. rapl_register_powercap(), which registers powercap control type. rapl_unregsiter_powercap(), which unregisters platform rapl domain and powercap control type. This is confusing as the function name does not describe what it does clearly. With this patch, the three functions are removed, and two new functions rapl_register_platform_domain()/rapl_unregister_platform_domain() are introduced instead, and they do exactly what their function name describes. Plus, as part of the common code, hardcoded MSR accesses in these functions are converted to follow the abstracted register access. Reviewed-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com> Tested-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-11intel_rapl: abstract register access operationsZhang Rui
MSR and MMIO RAPL interfaces have different ways to access the registers, thus in order to abstract the register access operations, two callbacks, .read_raw()/.write_raw() are introduced, and they should be implemented by MSR RAPL and MMIO RAPL interface driver respectly. This patch implements them for the MSR I/F only. Reviewed-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com> Tested-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-11intel_rapl: abstract register addressZhang Rui
MSR and MMIO RAPL interface have different sets of registers, thus the RAPL register address should be obtained from interface specific structure, i.e. struct rapl_if_private, instead. Reviewed-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com> Tested-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-11intel_rapl: introduce struct rapl_if_privateZhang Rui
Introduce a new structure, rapl_if_private, to save the private data for different RAPL Interface. Reviewed-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com> Tested-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-11intel_rapl: introduce intel_rapl.hZhang Rui
Create a new header file for the common definitions that might be used by different RAPL Interface. Reviewed-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com> Tested-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-11intel_rapl: remove hardcoded register indexZhang Rui
enum rapl_domain_reg_id is defined for the RAPL registers for each RAPL domain, thus use it whenever possible. Reviewed-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com> Tested-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-11intel_rapl: use reg instead of msrZhang Rui
To support both MSR and MMIO Interface, use 'reg' to discribe RAPL registers instead of 'msr'. Reviewed-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com> Tested-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-08Merge branch 'x86-topology-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 topology updates from Ingo Molnar: "Implement multi-die topology support on Intel CPUs and expose the die topology to user-space tooling, by Len Brown, Kan Liang and Zhang Rui. These changes should have no effect on the kernel's existing understanding of topologies, i.e. there should be no behavioral impact on cache, NUMA, scheduler, perf and other topologies and overall system performance" * 'x86-topology-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/rapl: Cosmetic rename internal variables in response to multi-die/pkg support perf/x86/intel/uncore: Cosmetic renames in response to multi-die/pkg support hwmon/coretemp: Cosmetic: Rename internal variables to zones from packages thermal/x86_pkg_temp_thermal: Cosmetic: Rename internal variables to zones from packages perf/x86/intel/cstate: Support multi-die/package perf/x86/intel/rapl: Support multi-die/package perf/x86/intel/uncore: Support multi-die/package topology: Create core_cpus and die_cpus sysfs attributes topology: Create package_cpus sysfs attribute hwmon/coretemp: Support multi-die/package powercap/intel_rapl: Update RAPL domain name and debug messages thermal/x86_pkg_temp_thermal: Support multi-die/package powercap/intel_rapl: Support multi-die/package powercap/intel_rapl: Simplify rapl_find_package() x86/topology: Define topology_logical_die_id() x86/topology: Define topology_die_id() cpu/topology: Export die_id x86/topology: Create topology_max_die_per_package() x86/topology: Add CPUID.1F multi-die/package support
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 309Thomas Gleixner
Based on 2 normalized pattern(s): it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 11 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000434.249870634@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-23powercap/intel_rapl: Update RAPL domain name and debug messagesZhang Rui
The RAPL domain "name" attribute contains "Package-N", which is ambiguous on multi-die per-package systems. Update the name to "package-X-die-Y" on those systems. No change on systems without multi-die/package. Update driver debug messages. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@kernel.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: linux-pm@vger.kernel.org Link: https://lkml.kernel.org/r/6510b784e16374447965925588ec6e46d5d007d8.1557769318.git.len.brown@intel.com
2019-05-23powercap/intel_rapl: Support multi-die/packageZhang Rui
RAPL "package" domains are actually implemented in hardware per-die. Thus, the new multi-die/package systems have mulitple domains within each physical package. Update the intel_rapl driver to be "die aware" -- exporting multiple domains within a single package, when present. No change on single die/package systems. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@kernel.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: linux-pm@vger.kernel.org Link: https://lkml.kernel.org/r/9fcb4719aeb7efccf3bc75ed8dd559e46121649f.1557769318.git.len.brown@intel.com
2019-05-23powercap/intel_rapl: Simplify rapl_find_package()Zhang Rui
Simplify how the code to discover a package is called. Rename find_package_by_id() to rapl_find_package_domain() Syntax only, no functional or semantic change. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@kernel.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: linux-pm@vger.kernel.org Link: https://lkml.kernel.org/r/ae3d1903407fd6e3684234b674f4f0e62c2ab54c.1557769318.git.len.brown@intel.com
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>