summaryrefslogtreecommitdiff
path: root/drivers/power
AgeCommit message (Collapse)Author
2018-11-13power/supply: fix sc27xx_fuel_gauge build errorsRandy Dunlap
Fix build errors when FUEL_GUAGE_SC27XX is enabled but IIO is either not enabled or IIO=m and FUEL_GUAGE_SC27XX=y. ld: drivers/power/supply/sc27xx_fuel_gauge.o: in function `sc27xx_fgu_get_temp': sc27xx_fuel_gauge.c:(.text+0x1d2): undefined reference to `iio_read_channel_processed' ld: drivers/power/supply/sc27xx_fuel_gauge.o: in function `sc27xx_fgu_probe': sc27xx_fuel_gauge.c:(.text+0x97f): undefined reference to `devm_iio_channel_get' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: linux-pm@vger.kernel.org Acked-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-11-09power: supply: Add Spreadtrum SC27XX fuel gauge unit driverBaolin Wang
This patch adds the Spreadtrum SC27XX serial PMICs fuel gauge support, which is used to calculate the battery capacity. Original-by: Yuanjiang Yu <yuanjiang.yu@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-11-09power: supply: core: Add some helpers to use the battery OCV capacity tableBaolin Wang
We have introduced some battery properties to present the OCV table temperatures and OCV capacity table values. Thus this patch add OCV temperature and OCV table for battery information, as well as providing some helper functions to use the OCV capacity table for users. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-11-09power: supply: core: Add one field to present the battery internal resistanceBaolin Wang
Add one field for 'struct power_supply_battery_info' to present the battery factory internal resistance. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-10-26Merge tag 'devicetree-for-4.20' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull Devicetree updates from Rob Herring: "A bit bigger than normal as I've been busy this cycle. There's a few things with dependencies and a few things subsystem maintainers didn't pick up, so I'm taking them thru my tree. The fixes from Johan didn't get into linux-next, but they've been waiting for some time now and they are what's left of what subsystem maintainers didn't pick up. Summary: - Sync dtc with upstream version v1.4.7-14-gc86da84d30e4 - Work to get rid of direct accesses to struct device_node name and type pointers in preparation for removing them. New helpers for parsing DT cpu nodes and conversions to use the helpers. printk conversions to %pOFn for printing DT node names. Most went thru subystem trees, so this is the remainder. - Fixes to DT child node lookups to actually be restricted to child nodes instead of treewide. - Refactoring of dtb targets out of arch code. This makes the support more uniform and enables building all dtbs on c6x, microblaze, and powerpc. - Various DT binding updates for Renesas r8a7744 SoC - Vendor prefixes for Facebook, OLPC - Restructuring of some ARM binding docs moving some peripheral bindings out of board/SoC binding files - New "secure-chosen" binding for secure world settings on ARM - Dual licensing of 2 DT IRQ binding headers" * tag 'devicetree-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (78 commits) ARM: dt: relicense two DT binding IRQ headers power: supply: twl4030-charger: fix OF sibling-node lookup NFC: nfcmrvl_uart: fix OF child-node lookup net: stmmac: dwmac-sun8i: fix OF child-node lookup net: bcmgenet: fix OF child-node lookup drm/msm: fix OF child-node lookup drm/mediatek: fix OF sibling-node lookup of: Add missing exports of node name compare functions dt-bindings: Add OLPC vendor prefix dt-bindings: misc: bk4: Add device tree binding for Liebherr's BK4 SPI bus dt-bindings: thermal: samsung: Add SPDX license identifier dt-bindings: clock: samsung: Add SPDX license identifiers dt-bindings: timer: ostm: Add R7S9210 support dt-bindings: phy: rcar-gen2: Add r8a7744 support dt-bindings: can: rcar_can: Add r8a7744 support dt-bindings: timer: renesas, cmt: Document r8a7744 CMT support dt-bindings: watchdog: renesas-wdt: Document r8a7744 support dt-bindings: thermal: rcar: Add device tree support for r8a7744 Documentation: dt: Add binding for /secure-chosen/stdout-path dt-bindings: arm: zte: Move sysctrl bindings to their own doc ...
2018-10-23power: supply: twl4030-charger: fix OF sibling-node lookupJohan Hovold
Use the new of_get_compatible_child() helper to lookup the usb sibling node instead of using of_find_compatible_node(), which searches the entire tree from a given start node and thus can return an unrelated (non-sibling) node. This also addresses a potential use-after-free (e.g. after probe deferral) as the tree-wide helper drops a reference to its first argument (i.e. the parent device node). While at it, also fix the related phy-node reference leak. Fixes: f5e4edb8c888 ("power: twl4030_charger: find associated phy by more reliable means.") Cc: stable <stable@vger.kernel.org> # 4.2 Cc: NeilBrown <neilb@suse.de> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Sebastian Reichel <sre@kernel.org> Reviewed-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org>
2018-10-21power: max8925: mark expected switch fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 201510 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-10-21power: supply: fix spelling mistake "Gauage" -> "Gauge"Colin Ian King
Trivial fix to spelling mistake in MODULE_DESCRIPTION text Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-10-09PM / AVS: SmartReflex: remove unused functionUwe Kleine-König
omap_sr_register_pmic() was introduced in 2010 in commit 984aa6dbf4ca ("OMAP3: PM: Adding smartreflex driver support.") . There was never any caller of this function in mainline resulting in a warning sr_init: No PMIC hook to init smartreflex for each machine where this driver is enabled. So remove the unused function and the pr_warn. Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-09-20power: reset: qcom-pon: Add pms405 pon supportVinod Koul
Update the binding and driver for pms405 pon. Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-09-20power: supply: bq27xxx: Add support for BQ27411Liu Xiang
According to the datasheet, bq27411 is similar to bq27421. Signed-off-by: Liu Xiang <liu.xiang6@zte.com.cn> Reviewed-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-09-20power: supply: Add Spreadtrum SC2731 charger supportBaolin Wang
This patch adds the SC2731 PMIC switch charger support. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-09-20power: supply: twl4030_charger: disable eoc interrupt on linear chargeAndreas Kemnade
This avoids getting woken up from suspend after power interruptions when the bci wrongly thinks the battery is full just because of input current going low because of low input power Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-09-20power: supply: twl4030_charger: fix charging current out-of-boundsAndreas Kemnade
the charging current uses unsigned int variables, if we step back if the current is still low, we would run into negative which means setting the target to a huge value. Better add checks here. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-09-18power: supply: bq25890_charger: fix semicolon.cocci warningskbuild test robot
drivers/power/supply/bq25890_charger.c:614:2-3: Unneeded semicolon drivers/power/supply/bq25890_charger.c:621:2-3: Unneeded semicolon drivers/power/supply/bq25890_charger.c:630:3-4: Unneeded semicolon drivers/power/supply/bq25890_charger.c:638:2-3: Unneeded semicolon drivers/power/supply/bq25890_charger.c:644:2-3: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci Fixes: 9d9ae3414d1b ("power: supply: bq25890_charger: Add debugging output of failed initialization") CC: Angus Ainslie (Purism) <angus@akkea.ca> Signed-off-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-09-16power: supply: max8998-charger: Fix platform data retrievalTomasz Figa
Since the max8998 MFD driver supports instantiation by DT, platform data retrieval is handled in MFD probe and cell drivers should get use the pdata field of max8998_dev struct to obtain them. Fixes: ee999fb3f17f ("mfd: max8998: Add support for Device Tree") Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-09-16Merge tag 'psy-mfd-cros-immutable-for-v4.20-signed' into psy-nextSebastian Reichel
Immutable branch for mfd and power-supply for v4.20 Immutable branch between mfd and power-supply for driver changes in CROS USBPD charger driver. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-09-16power: supply: cros: add support for dedicated portFabien Parent
ChromeOS devices can have one optional dedicated port. The Dedicated port is unique and similar to the USB PD ports except that it doesn't support as many properties. The presence of a dedicated port is determined from whether the EC's charger port count is equal to 'number of USB PD port' + 1. The dedicated port ID is always the last valid port ID. This commit keeps compatibility with Embedded Controllers that do not support the new EC_CMD_CHARGE_PORT_COUNT command by setting the number of charger port to be equal to the number of USB PD port when this command fails. Signed-off-by: Fabien Parent <fparent@baylibre.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-09-16Merge tag 'psy-at91-poweroff-immutable-for-v4.20-signed' into psy-nextSebastian Reichel
Immutable branch for mach-at91 and power-supply for v4.20 Immutable branch between mach-at91 and power-supply for driver changes in at91-poweroff. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-09-16power: reset: at91-poweroff: do not procede if at91_shdwc is allocatedClaudiu Beznea
There should be only one instance of struct shdwc in the system. This is referenced through at91_shdwc. Return in probe if at91_shdwc is already allocated. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-09-16power: reset: at91-poweroff: rename at91_shdwc_base member of struct shdwcClaudiu Beznea
Rename at91_shdwc_base member of struct shdwc to shdwc_base. There is already an "at91" string in at91_shdwc object. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-09-16power: reset: at91-poweroff: make sclk part of struct shdwcClaudiu Beznea
Make sclk part of struct shdwc to have all the data specific to SHDWC grouped together in one structure. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-09-16power: reset: at91-poweroff: make mpddrc_base part of struct shdwcClaudiu Beznea
Make mpddrc_base part of struct shdwc since there is also only one instance of struct shdwc *at91_shdwc in system and to have all data specific to SHDWC grouped together. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-09-16power: reset: at91-poweroff: use only one poweroff functionClaudiu Beznea
Use only one poweroff function for sama5d2 and adapt it to work for both scenarios (having LPDDR or not). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-09-16power: reset: at91-poweroff: switch to slow clock before shutdownClaudiu Beznea
The SAMA5D2 NRST input signal is resynchronized with the SLCK clock and it can take up to 2 SLCK cycles (about 90us) for the internal reset to be effective. During this delay, the VDDCORE current consumption may still be high (application-dependent) with the VDDCORE regulator already OFF. Under such conditions, VDDCORE may operate below its operating range leading to potential register corruption. To prevent such situation, it is recommended to decrease significantly the power consumption of the device once the voltage regulator is turned-off. This can be achieved by operating the device at a much lower low frequency. To solve this switch the master clock to slock clock just before writing shutdown command to shutdown controller. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Suggested-by: Patrice Vilchez <patrice.vilchez@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-09-16power: reset: convert to SPDX identifiersKuninori Morimoto
This patch updates license to use SPDX-License-Identifier instead of verbose license text. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-09-16power: supply: ab8500_fg: silence uninitialized variable warningsDan Carpenter
If kstrtoul() fails then we print "charge_full" when it's uninitialized. The debug printk doesn't add anything so I deleted it and cleaned these two functions up a bit. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-09-16power: supply: sysfs: ratelimit property read error messageDavid Lechner
This adds rate limiting to the message that is printed when reading a power supply property via sysfs returns an error. This will prevent userspace applications from unintentionally dDOSing the system by continuously reading a property that returns an error. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-09-16power: supply: bq25890_charger: Read back the current battery voltageAngus Ainslie (Purism)
The BQ2589x family has the capability of reading the current battery voltage. Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-09-16power: supply: bq25890_charger: Add the BQ25896 partAngus Ainslie (Purism)
The BQ25896 is almost identical to the BQ25890. Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-09-16power: supply: bq25890_charger: Remove unused table entriesAngus Ainslie (Purism)
There are a few table entries that aren't used. Drop them. Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-09-16power: supply: bq25890_charger: Add debugging output of failed initializationAngus Ainslie (Purism)
To ease adding a new part variant some debugging is handy. Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-08-30power: supply: maxim: Add SPDX license identifiersKrzysztof Kozlowski
Replace GPL v2.0 and v2.0+ license statements with SPDX license identifiers. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-08-30power: supply: ab8500_fg: fix obsolete functionDing Xiang
simple_strtoul is obsolete, and use kstrtoint instead Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-08-29power: supply: cros_usbpd: remove unused pointer 'dev'Colin Ian King
Pointer 'dev' is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: variable 'dev' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-08-23treewide: convert ISO_8859-1 text comments to utf-8Arnd Bergmann
Almost all files in the kernel are either plain text or UTF-8 encoded. A couple however are ISO_8859-1, usually just a few characters in a C comments, for historic reasons. This converts them all to UTF-8 for consistency. Link: http://lkml.kernel.org/r/20180724111600.4158975-1-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Simon Horman <horms@verge.net.au> [IPVS portion] Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> [IIO] Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Acked-by: Rob Herring <robh@kernel.org> Cc: Joe Perches <joe@perches.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-21Merge tag 'for-v4.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: - Improve support for TI bq20z75 in sbs-battery - Add Qualcomm PM8xxx reboot driver - Add cros-ec USBPD charger driver - Move ds2760 battery driver from w1 to power-supply and add DT support - Misc fixes * tag 'for-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (28 commits) power: supply: bq27xxx: Update comments power: supply: max77693_charger: fix unintentional fall-through power: supply: mark expected switch fall-throughs power: supply: lego_ev3_battery: fix Vce offset power: supply: lego_ev3_battery: Don't ignore iio_read_channel_processed() return value power: supply: ds2760_battery: add devicetree probing power: supply: ds2760_battery: merge ds2760 supply driver with its w1 slave companion w1: core: match sub-nodes of bus masters in devicetree dt-bindings: w1: document bindings for ds2760 battery monitor dt-bindings: w1: document generic onewire bindings power: supply: adp5061: Fix a couple off by ones dt-bindings: power: reset: qcom: Add resin binding adp5061: New driver for ADP5061 I2C battery charger power: generic-adc-battery: check for duplicate properties copied from iio channels power: generic-adc-battery: fix out-of-bounds write when copying channel properties power: supply: axp288_charger: Fix initial constant_charge_current value power: supply: ab8500: stop using getnstimeofday64() power: gemini-poweroff: Avoid more spurious poweroffs power: vexpress: fix corruption in notifier registration power: remove possible deadlock when unregistering power_supply ...
2018-08-16Merge branch 'psy-fixes' into psy-nextSebastian Reichel
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2018-07-24power: supply: bq27xxx: Update commentsLiu Xiang
The URL of bq27441-g1 and bq27426 are missing and bq27520-g4 is duplicated. Signed-off-by: Liu Xiang <liu.xiang6@zte.com.cn> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Acked-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-07-23power: supply: max77693_charger: fix unintentional fall-throughGustavo A. R. Silva
It seems that a *break* is missing in order to avoid a fall-through. Otherwise, the calculation of *data* makes no sense. Addresses-Coverity-ID: 1271172 ("Missing break in switch") Fixes: 87c2d9067893 ("power: max77693: Add charger driver for Maxim 77693") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-07-23power: supply: mark expected switch fall-throughsGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1394724 ("Missing break in switch") Addresses-Coverity-ID: 114958 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-07-22power: supply: lego_ev3_battery: fix Vce offsetDavid Lechner
This fixes the value that accounts for the Vce of a transistor in the LEGO MINDSTORMS EV3 power supply driver. The old value (200mV) was the max value from the data sheet. After testing, the actual value has been found to be 50mV. By using 50mV we get a more accurate voltage indication. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-07-22power: supply: lego_ev3_battery: Don't ignore iio_read_channel_processed() ↵David Lechner
return value This changes the LEGO MINDSTORMS EV3 power supply driver to return an error if iio_read_channel_processed() fails. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-07-22Merge tag 'ds2760-for-v4.19-signed' into psy-nextSebastian Reichel
Immutable branch for moving ds2760 driver from w1 to power supply Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-07-11power: supply: ds2760_battery: add devicetree probingDaniel Mack
Add a matching table for devicetree probing, and optionally set the module parameter variables from DT properties. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-07-11power: supply: ds2760_battery: merge ds2760 supply driver with its w1 slave ↵Daniel Mack
companion This patch removes the w1 slave driver that used to register the w1 family and instanciate a platform device at runtime. The code now lives in the supply driver instead to avoid that level of indirection. The old device name "ds2760-battery.0" is preserved, so userspace applications can access the same virtual device nodes as before. Note that because the w1 core does not currently have a framework for suspend/resume, the driver now registers a PM notifier callback. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-07-11power: supply: adp5061: Fix a couple off by onesDan Carpenter
We end up reading one element beyond the end of the adp5061_vmax[] array here. Fixes: fe8e81b7e899 ("adp5061: New driver for ADP5061 I2C battery charger") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-07-07headers: separate linux/mod_devicetable.h from linux/platform_device.hRandy Dunlap
At over 4000 #includes, <linux/platform_device.h> is the 9th most #included header file in the Linux kernel. It does not need <linux/mod_devicetable.h>, so drop that header and explicitly add <linux/mod_devicetable.h> to source files that need it. 4146 #include <linux/platform_device.h> After this patch, there are 225 files that use <linux/mod_devicetable.h>, for a reduction of around 3900 times that <linux/mod_devicetable.h> does not have to be read & parsed. 225 #include <linux/mod_devicetable.h> This patch was build-tested on 20 different arch-es. It also makes these drivers SubmitChecklist#1 compliant. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kbuild test robot <lkp@intel.com> # drivers/media/platform/vimc/ Reported-by: kbuild test robot <lkp@intel.com> # drivers/pinctrl/pinctrl-u300.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-06adp5061: New driver for ADP5061 I2C battery chargerStefan Popa
This patch adds basic support for Analog Devices I2C programmable linear battery charger. With this driver, some parameters can be read and configured such as: * trickle charge current level (PRECHARGE_CURRENT) * trickle charge voltage threshold (VOLTAGE_MIN) * weak charge threshold (VOLTAGE_AVG) * constant current (CONSTANT_CHARGE_CURRENT) * constant charge voltage limit (CONSTANT_CHARGE_VOLTAGE_MAX) * battery full (CAPACITY_LEVEL) * input current limit (INPUT_CURRENT_LIMIT) * charger status (STATUS) * battery status (CAPACITY_LEVEL) * termination current (CHARGE_TERM_CURRENT) Datasheet: http://www.analog.com/media/en/technical-documentation/data-sheets/ADP5061.pdf Signed-off-by: Stefan Popa <stefan.popa@analog.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-07-06power: generic-adc-battery: check for duplicate properties copied from iio ↵H. Nikolaus Schaller
channels If an iio channel defines a basic property, there are duplicate entries in /sys/class/power/*/uevent. So add a check to avoid duplicates. Since all channels may be duplicates, we have to modify the related error check. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Cc: stable@vger.kernel.org Fixes: e60fea794e6e ("power: battery: Generic battery driver using IIO") Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>