summaryrefslogtreecommitdiff
path: root/drivers/pinctrl
AgeCommit message (Collapse)Author
2020-02-04pinctrl: fix pxa2xx.c build warningsRandy Dunlap
Add #include of <linux/pinctrl/machine.h> to fix build warnings in pinctrl-pxa2xx.c. Fixes these warnings: In file included from ../drivers/pinctrl/pxa/pinctrl-pxa2xx.c:24:0: ../drivers/pinctrl/pxa/../pinctrl-utils.h:36:8: warning: `enum pinctrl_map_type' declared inside parameter list [enabled by default] enum pinctrl_map_type type); ^ ../drivers/pinctrl/pxa/../pinctrl-utils.h:36:8: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] Link: http://lkml.kernel.org/r/0024542e-cba9-8f13-6c18-32d0050a6007@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-29Merge tag 'pinctrl-v5.6-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes, nothing too exciting about this. Some changes hit arch/sh and arch/arm but are well isolated and acknowledged by the respective arch maintainers. Core changes: - Dropped the chained IRQ setup callback into GPIOLIB as we got rid of the last users of that in this changeset. New drivers: - New driver for Ingenic X1830. - New driver for Freescale i.MX8MP. Driver enhancements: - Fix all remaining Intel drivers to pass their IRQ chips along with the GPIO chips. - Intel Baytrail allocates its irqchip dynamically. - Intel Lynxpoint is thoroughly rewritten and modernized. - Aspeed AST2600 pin muxing and configuration is much improved. - Qualcomm SC7180 functions are updated and wakeup interrupt map is provided. - A whole slew of Renesas SH-PFC cleanups and improvements. - Fix up the Intel DT bindings to use the generic YAML DT bindings schema (a first user of this)" * tag 'pinctrl-v5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (99 commits) pinctrl: madera: Remove extra blank line pinctrl: qcom: Don't lock around irq_set_irq_wake() pinctrl: mvebu: armada-37xx: use use platform api gpio: Drop the chained IRQ handler assign function pinctrl: freescale: Add i.MX8MP pinctrl driver support dt-bindings: imx: Add pinctrl binding doc for i.MX8MP pinctrl: tigerlake: Tiger Lake uses _HID enumeration pinctrl: sunrisepoint: Add Coffee Lake-S ACPI ID pinctrl: iproc: Use platform_get_irq_optional() to avoid error message pinctrl: dt-bindings: Fix some errors in the lgm and pinmux schema pinctrl: intel: Pass irqchip when adding gpiochip pinctrl: intel: Add GPIO <-> pin mapping ranges via callback pinctrl: baytrail: Replace WARN with dev_info_once when setting direct-irq pin to output pinctrl: baytrail: Do not clear IRQ flags on direct-irq enabled pins pinctrl: sunrisepoint: Add missing Interrupt Status register offset pinctrl: sh-pfc: Split R-Car H3 support in two independent drivers pinctrl: artpec6: fix __iomem on reg in set pinctrl: ingenic: Use devm_platform_ioremap_resource() pinctrl: ingenic: Factorize irq_set_type function pinctrl: ingenic: Remove duplicated ingenic_chip_info structures ...
2020-01-29Merge tag 'gpio-v5.6-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v5.6 kernel cycle. This is a pretty calm cycle so far, nothing special going on really. Some more changes will come in from the irqchip and pin control trees. I also deleted an orphan include file for FMC that was dangling since subsystem was removed. Core changes: - Document the usecases for the kernelspace vs userspace handling of GPIOs. - Handle MSI (message signalled interrupts) properly in the core hierarchical irqdomain code. - Fix a rare race condition while initializing the descriptor array. New drivers: - Xylon LogiCVC GPIO driver. - WDC934x GPIO controller driver. Driver improvements: - Implemented suspend/resume in the Tegra driver. - MPC8xx edge detection fixup. - Properly convert ThunderX to use hierarchical irqdomain with GPIOLIB_IRQCHIP on top of the revert of the previous buggy switchover. This time it works (hopefully). Misc: - Drop a FMC remnant file <linux/ipmi-fru.h> - A slew of fixes" * tag 'gpio-v5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (48 commits) MAINTAINERS: Replace Tien Hock Loh as Altera PIO maintainer gpiolib: hold gpio devices lock until ->descs array is initialised gpio: aspeed-sgpio: fixed typos gpio: mvebu: clear irq in edge cause register before unmask edge irq gpiolib: Lower verbosity when allocating hierarchy irq gpiolib: Remove duplicated function gpio_do_set_config() gpio: Fix the no return statement warning gpio: wcd934x: Add support to wcd934x gpio controller gpiolib: remove set but not used variable 'config' gpio: vx855: fixed a typo gpio: mockup: sort headers alphabetically gpio: mockup: update the license tag gpio: Remove the unused flags gpiolib: Set lockdep class for hierarchical irq domains gpio: thunderx: Switch to GPIOLIB_IRQCHIP gpiolib: Add the support for the msi parent domain gpiolib: Add support for the irqdomain which doesn't use irq_fwspec as arg gpio: Add use guidance documentation dt-bindings: gpio: wcd934x: Add bindings for gpio gpio: altera: change to platform_get_irq_optional to avoid false-positive error ...
2020-01-27Merge tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremapLinus Torvalds
Pull ioremap updates from Christoph Hellwig: "Remove the ioremap_nocache API (plus wrappers) that are always identical to ioremap" * tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap: remove ioremap_nocache and devm_ioremap_nocache MIPS: define ioremap_nocache to ioremap
2020-01-27Merge tag 'mmc-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds
Pull MMC updates from Ulf Hansson: "There are no updates for the MEMSTICK subsystem this time. But note that I am also carrying a patch from the pinctrl tree, which has been shared through an immutable branch. Summary: MMC core: - Convert to reasonable timeouts for all CMD6 commands (updates for BKOPS, CACHE_FLUSH and INAND_CMD38_ARG_EXT_CSD) for eMMC - Respect f_max clock rate at card initialization - Add gpiod_toggle_active_low() API - Consolidate slot-gpio code by using gpiod_toggle_active_low() MMC host: - Add pinctrl_select_default_state() API - Consolidate pintctrl code by using pinctrl_select_default_state() - mmci: Support any block sizes for SDIO for some variants - mmci: Enable reset control for stm32_sdmmc - mmc_spi: Toggle SPI_CS_HIGH polarity rather than hard-coding it - renesas_sdhi: Add support for the r8a77961 variant - renesas_sdhi: A few minor improvements - rockchip-dw-mshc: Add support for the rk3308 variant - sdhci: Enable support for external DMA controllers - sdhci: Fixup error path when sending CMD12 - sdhci-brcmstb: Add support for 7216b0 variant - sdhci-brcmstb: Add support for command queuing (CQHCI) - sdhci-brcmstb: Add support for eMMC HS400ES mode - sdhci-msm: Add support for the sc7180 variant - sdhci-msm: Add support for command queuing (CQHCI) - sdhci-of-at91: Add support for the SAM9x60 variant - sdhci-of-at91: Improve support for tunings - sdhci-of-esdhc: A few fixups for some clock related issues - sdhci-omap: Add support for the am335x and the am437x variants - sdhci-omap: Improve support for erase operations - sdhci-omap: Add support for external DMA" * tag 'mmc-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (89 commits) mmc: core: Default to generic_cmd6_time as timeout in __mmc_switch() mmc: block: Use generic_cmd6_time when modifying INAND_CMD38_ARG_EXT_CSD mmc: core: Specify timeouts for BKOPS and CACHE_FLUSH for eMMC mmc: sdhci-cadence: remove unneeded 'inline' marker dt-bindings: mmc: rockchip-dw-mshc: add description for rk3308 dt-bindings: mmc: convert rockchip dw-mshc bindings to yaml dt-bindings: mmc: convert synopsys dw-mshc bindings to yaml mmc: sdhci-msm: Add CQHCI support for sdhci-msm mmc: sdhci: Let a vendor driver supply and update ADMA descriptor size mmc: sdhci-of-esdhc: fix serious issue clock is always disabled mmc: sdhci-of-esdhc: fix transfer mode register reading mmc: sdhci-brcmstb: Fix incorrect switch to HS mode mmc: sdhci-brcmstb: Add support for Command Queuing (CQE) mmc: sdhci-brcmstb: Add shutdown callback mmc: sdhci-brcmstb: Fix driver to defer on clk_get defer mmc: sdhci-brcmstb: Add ability to use HS400ES transfer mode dt-bindings: mmc: brcm,sdhci-brcmstb: Add support for 7216b0 mmc: core: limit probe clock frequency to configured f_max mmc: sdhci-milbeaut: Remove redundant platform_get_irq error message mmc: sdhci: fix an issue of mixing different types ...
2020-01-24pinctrl: madera: Remove extra blank lineCharles Keepax
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20200122111150.11033-1-ckeepax@opensource.cirrus.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-24pinctrl: qcom: Don't lock around irq_set_irq_wake()Stephen Boyd
We don't need to hold the local pinctrl lock here to set irq wake on the summary irq line. Doing so only leads to lockdep warnings instead of protecting us from anything. Remove the locking. WARNING: possible circular locking dependency detected 5.4.11 #2 Tainted: G W ------------------------------------------------------ cat/3083 is trying to acquire lock: ffffff81f4fa58c0 (&irq_desc_lock_class){-.-.}, at: __irq_get_desc_lock+0x64/0x94 but task is already holding lock: ffffff81f4880c18 (&pctrl->lock){-.-.}, at: msm_gpio_irq_set_wake+0x48/0x7c which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&pctrl->lock){-.-.}: _raw_spin_lock_irqsave+0x64/0x80 msm_gpio_irq_ack+0x68/0xf4 __irq_do_set_handler+0xe0/0x180 __irq_set_handler+0x60/0x9c irq_domain_set_info+0x90/0xb4 gpiochip_hierarchy_irq_domain_alloc+0x110/0x200 __irq_domain_alloc_irqs+0x130/0x29c irq_create_fwspec_mapping+0x1f0/0x300 irq_create_of_mapping+0x70/0x98 of_irq_get+0xa4/0xd4 spi_drv_probe+0x4c/0xb0 really_probe+0x138/0x3f0 driver_probe_device+0x70/0x140 __device_attach_driver+0x9c/0x110 bus_for_each_drv+0x88/0xd0 __device_attach+0xb0/0x160 device_initial_probe+0x20/0x2c bus_probe_device+0x34/0x94 device_add+0x35c/0x3f0 spi_add_device+0xbc/0x194 of_register_spi_devices+0x2c8/0x408 spi_register_controller+0x57c/0x6fc spi_geni_probe+0x260/0x328 platform_drv_probe+0x90/0xb0 really_probe+0x138/0x3f0 driver_probe_device+0x70/0x140 device_driver_attach+0x4c/0x6c __driver_attach+0xcc/0x154 bus_for_each_dev+0x84/0xcc driver_attach+0x2c/0x38 bus_add_driver+0x108/0x1fc driver_register+0x64/0xf8 __platform_driver_register+0x4c/0x58 spi_geni_driver_init+0x1c/0x24 do_one_initcall+0x1a4/0x3e8 do_initcall_level+0xb4/0xcc do_basic_setup+0x30/0x48 kernel_init_freeable+0x124/0x1a8 kernel_init+0x14/0x100 ret_from_fork+0x10/0x18 -> #0 (&irq_desc_lock_class){-.-.}: __lock_acquire+0xeb4/0x2388 lock_acquire+0x1cc/0x210 _raw_spin_lock_irqsave+0x64/0x80 __irq_get_desc_lock+0x64/0x94 irq_set_irq_wake+0x40/0x144 msm_gpio_irq_set_wake+0x5c/0x7c set_irq_wake_real+0x40/0x5c irq_set_irq_wake+0x70/0x144 cros_ec_rtc_suspend+0x38/0x4c platform_pm_suspend+0x34/0x60 dpm_run_callback+0x64/0xcc __device_suspend+0x310/0x41c dpm_suspend+0xf8/0x298 dpm_suspend_start+0x84/0xb4 suspend_devices_and_enter+0xbc/0x620 pm_suspend+0x210/0x348 state_store+0xb0/0x108 kobj_attr_store+0x14/0x24 sysfs_kf_write+0x4c/0x64 kernfs_fop_write+0x15c/0x1fc __vfs_write+0x54/0x18c vfs_write+0xe4/0x1a4 ksys_write+0x7c/0xe4 __arm64_sys_write+0x20/0x2c el0_svc_common+0xa8/0x160 el0_svc_handler+0x7c/0x98 el0_svc+0x8/0xc other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&pctrl->lock); lock(&irq_desc_lock_class); lock(&pctrl->lock); lock(&irq_desc_lock_class); *** DEADLOCK *** 7 locks held by cat/3083: #0: ffffff81f06d1420 (sb_writers#7){.+.+}, at: vfs_write+0xd0/0x1a4 #1: ffffff81c8935680 (&of->mutex){+.+.}, at: kernfs_fop_write+0x12c/0x1fc #2: ffffff81f4c322f0 (kn->count#337){.+.+}, at: kernfs_fop_write+0x134/0x1fc #3: ffffffe89a641d60 (system_transition_mutex){+.+.}, at: pm_suspend+0x108/0x348 #4: ffffff81f190e970 (&dev->mutex){....}, at: __device_suspend+0x168/0x41c #5: ffffff81f183d8c0 (lock_class){-.-.}, at: __irq_get_desc_lock+0x64/0x94 #6: ffffff81f4880c18 (&pctrl->lock){-.-.}, at: msm_gpio_irq_set_wake+0x48/0x7c stack backtrace: CPU: 4 PID: 3083 Comm: cat Tainted: G W 5.4.11 #2 Hardware name: Google Cheza (rev3+) (DT) Call trace: dump_backtrace+0x0/0x174 show_stack+0x20/0x2c dump_stack+0xc8/0x124 print_circular_bug+0x2ac/0x2c4 check_noncircular+0x1a0/0x1a8 __lock_acquire+0xeb4/0x2388 lock_acquire+0x1cc/0x210 _raw_spin_lock_irqsave+0x64/0x80 __irq_get_desc_lock+0x64/0x94 irq_set_irq_wake+0x40/0x144 msm_gpio_irq_set_wake+0x5c/0x7c set_irq_wake_real+0x40/0x5c irq_set_irq_wake+0x70/0x144 cros_ec_rtc_suspend+0x38/0x4c platform_pm_suspend+0x34/0x60 dpm_run_callback+0x64/0xcc __device_suspend+0x310/0x41c dpm_suspend+0xf8/0x298 dpm_suspend_start+0x84/0xb4 suspend_devices_and_enter+0xbc/0x620 pm_suspend+0x210/0x348 state_store+0xb0/0x108 kobj_attr_store+0x14/0x24 sysfs_kf_write+0x4c/0x64 kernfs_fop_write+0x15c/0x1fc __vfs_write+0x54/0x18c vfs_write+0xe4/0x1a4 ksys_write+0x7c/0xe4 __arm64_sys_write+0x20/0x2c el0_svc_common+0xa8/0x160 el0_svc_handler+0x7c/0x98 el0_svc+0x8/0xc Fixes: 6aced33f4974 ("pinctrl: msm: drop wake_irqs bitmap") Cc: Douglas Anderson <dianders@chromium.org> Cc: Brian Masney <masneyb@onstation.org> Cc: Lina Iyer <ilina@codeaurora.org> Cc: Maulik Shah <mkshah@codeaurora.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20200121180950.36959-1-swboyd@chromium.org Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-23pinctrl: mvebu: armada-37xx: use use platform apiPeng Fan
platform_irq_count() and platform_get_irq() is the more generic way (independent of device trees) to determine the count of available interrupts. So use this instead. As platform_irq_count() might return an error code (which of_irq_count doesn't) some additional handling is necessary. Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/1576672860-14420-1-git-send-email-peng.fan@nxp.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-23pinctrl: freescale: Add i.MX8MP pinctrl driver supportAnson Huang
Add the pinctrl driver support for i.MX8MP. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Link: https://lore.kernel.org/r/1579052348-32167-2-git-send-email-Anson.Huang@nxp.com Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-23Merge tag 'intel-pinctrl-v5.6-1' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into devel intel-pinctrl for v5.6-1 * Tiger Lake appears to have _HID enumeration, thus driver has been updated * Coffee Lake-S has the same IP as Sunrisepoint, thus ID has been added * Baytrail has got more clean ups and bug fixes, such as direct IRQ handling * Lynxpoint GPIO has been converted to true pin control driver * The common driver now uses IRQ chip enumeration via GPIO chip The following is an automated git shortlog grouped by driver: baytrail: - Replace WARN with dev_info_once when setting direct-irq pin to output - Do not clear IRQ flags on direct-irq enabled pins - Reuse struct intel_pinctrl in the driver - Use local variable to keep device pointer - Keep pointer to struct device instead of its container - Use GPIO direction definitions - Move IRQ valid mask initialization to a dedicated callback - Group GPIO IRQ chip initialization - Allocate IRQ chip dynamic cherryview: - Use GPIO direction definitions intel: - Pass irqchip when adding gpiochip - Add GPIO <-> pin mapping ranges via callback - Share struct intel_pinctrl for wider use - Use GPIO direction definitions lynxpoint: - Update summary in the driver - Switch to pin control API - Add GPIO <-> pin mapping ranges via callback - Implement ->pin_dbg_show() - Add pin control operations - Reuse struct intel_pinctrl in the driver - Add pin control data structures - Implement intel_gpio_get_direction callback - Implement ->irq_ack() callback - Move ownership check to IRQ chip - Move lp_irq_type() closer to IRQ related routines - Move ->remove closer to ->probe() - Extract lp_gpio_acpi_use() for future use - Convert unsigned to unsigned int - Switch to memory mapped IO accessors - Keep pointer to struct device instead of its container - Relax GPIO request rules - Assume 2 bits for mode selector - Use standard pattern for memory allocation - Use %pR to print IO resource - Drop useless assignment - Correct amount of pins - Use raw_spinlock for locking - Move GPIO driver to pin controller folder sunrisepoint: - Add Coffee Lake-S ACPI ID - Add missing Interrupt Status register offset tigerlake: - Tiger Lake uses _HID enumeration
2020-01-17Merge tag 'intel-pinctrl-v5.5-3' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into fixes intel-pinctrl for v5.5-3 * Fix Interrupt Status register offset for Intel Sunrisepoint PCH-H. The following is an automated git shortlog grouped by driver: sunrisepoint: - Add missing Interrupt Status register offset
2020-01-16pinctrl: tigerlake: Tiger Lake uses _HID enumerationMika Westerberg
Turns out that Tiger Lake GPIO will be enumerated using _HID method where there is only a single ACPI device and multiple BARs so rework the driver to support that scheme instead. Fixes: c9ccf71fc807 ("pinctrl: intel: Add Intel Tiger Lake pin controller support") Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-16pinctrl: sunrisepoint: Add Coffee Lake-S ACPI IDMika Westerberg
Intel Coffee Lake-S PCH has the same GPIO hardware than Sunrisepoint-H PCH but the ACPI ID is different. Add this new ACPI ID to the list of supported devices. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-15pinctrl: iproc: Use platform_get_irq_optional() to avoid error messageRayagonda Kokatanur
Use platform_get_irq_optional() instead of platform_get_irq() to avoid below error message during probe: [ 0.589121] iproc-gpio 66424800.gpio: IRQ index 0 not found Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Link: https://lore.kernel.org/r/20200110035524.23511-1-rayagonda.kokatanur@broadcom.com Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-15gpiolib: Add support for the irqdomain which doesn't use irq_fwspec as argKevin Hao
Some gpio's parent irqdomain may not use the struct irq_fwspec as argument, such as msi irqdomain. So rename the callback populate_parent_fwspec() to populate_parent_alloc_arg() and make it allocate and populate the specific struct which is needed by the parent irqdomain. Signed-off-by: Kevin Hao <haokexin@gmail.com> Link: https://lore.kernel.org/r/20200114082821.14015-3-haokexin@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-15Merge tag 'samsung-pinctrl-5.6' of ↵Linus Walleij
https://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung into devel Samsung pinctrl drivers changes for v5.6 Enable compile test for build coverage (and fix exposed missing dependency). Clarify Kconfig option help text.
2020-01-09pinctrl: sunrisepoint: Add missing Interrupt Status register offsetBoyan Ding
Commit 179e5a6114cc ("pinctrl: intel: Remove default Interrupt Status offset") removes default interrupt status offset of GPIO controllers, with previous commits explicitly providing the previously default offsets. However, the is_offset value in SPTH_COMMUNITY is missing, preventing related irq from being properly detected and handled. Fixes: f702e0b93cdb ("pinctrl: sunrisepoint: Provide Interrupt Status register offset") Link: https://bugzilla.kernel.org/show_bug.cgi?id=205745 Cc: stable@vger.kernel.org Signed-off-by: Boyan Ding <boyan.j.ding@gmail.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-09pinctrl: intel: Pass irqchip when adding gpiochipLinus Walleij
We need to convert all old gpio irqchips to pass the irqchip setup along when adding the gpio_chip. For more info see drivers/gpio/TODO. For chained irqchips this is a pretty straight-forward conversion. Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-09pinctrl: intel: Add GPIO <-> pin mapping ranges via callbackLinus Walleij
When IRQ chip is instantiated via GPIO library flow, the few functions, in particular the ACPI event registration mechanism, on some of ACPI based platforms expect that the pin ranges are initialized to that point. Add GPIO <-> pin mapping ranges via callback in the GPIO library flow. Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-09pinctrl: baytrail: Replace WARN with dev_info_once when setting direct-irq ↵Hans de Goede
pin to output Suspending Goodix touchscreens requires changing the interrupt pin to output before sending them a power-down command. Followed by wiggling the interrupt pin to wake the device up, after which it is put back in input mode. On Cherry Trail device the interrupt pin is listed as a GpioInt ACPI resource so we can do this without problems as long as we release the IRQ before changing the pin to output mode. On Bay Trail devices with a Goodix touchscreen direct-irq mode is used in combination with listing the pin as a normal GpioIo resource. This works fine, but this triggers the WARN in byt_gpio_set_direction-s output path because direct-irq support is enabled on the pin. This commit replaces the WARN call with a dev_info_once call, fixing a bunch of WARN splats in dmesg on each suspend/resume cycle. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-09pinctrl: baytrail: Do not clear IRQ flags on direct-irq enabled pinsHans de Goede
Suspending Goodix touchscreens requires changing the interrupt pin to output before sending them a power-down command. Followed by wiggling the interrupt pin to wake the device up, after which it is put back in input mode. On Bay Trail devices with a Goodix touchscreen direct-irq mode is used in combination with listing the pin as a normal GpioIo resource. This works fine, until the goodix driver gets rmmod-ed and then insmod-ed again. In this case byt_gpio_disable_free() calls byt_gpio_clear_triggering() which clears the IRQ flags and after that the (direct) IRQ no longer triggers. This commit fixes this by adding a check for the BYT_DIRECT_IRQ_EN flag to byt_gpio_clear_triggering(). Note that byt_gpio_clear_triggering() only gets called from byt_gpio_disable_free() for direct-irq enabled pins, as these are excluded from the irq_valid mask by byt_init_irq_valid_mask(). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-09Merge tag 'sh-pfc-for-v5.6-tag1' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel pinctrl: sh-pfc: Updates for v5.5 - Split R-Car H3 support in two independent drivers, - Miscellaneous fixes and cleanups.
2020-01-08pinctrl: sunrisepoint: Add missing Interrupt Status register offsetBoyan Ding
Commit 179e5a6114cc ("pinctrl: intel: Remove default Interrupt Status offset") removes default interrupt status offset of GPIO controllers, with previous commits explicitly providing the previously default offsets. However, the is_offset value in SPTH_COMMUNITY is missing, preventing related irq from being properly detected and handled. Fixes: f702e0b93cdb ("pinctrl: sunrisepoint: Provide Interrupt Status register offset") Link: https://bugzilla.kernel.org/show_bug.cgi?id=205745 Cc: stable@vger.kernel.org Signed-off-by: Boyan Ding <boyan.j.ding@gmail.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-08pinctrl: sh-pfc: Split R-Car H3 support in two independent driversGeert Uytterhoeven
Despite using the same compatible values ("r8a7795"-based) because of historical reasons, R-Car H3 ES1.x (R8A77950) and R-Car H3 ES2.0+ (R8A77951) are really different SoCs, with different part numbers, and with different Pin Function Controller blocks. Reflect this in the pinctrl configuration, by replacing the existing CONFIG_PINCTRL_PFC_R8A7795 symbol by two new config symbols: CONFIG_PINCTRL_PFC_R8A77950 and CONFIG_PINCTRL_PFC_R8A77951. The latter are selected automatically, depending on the soon-to-be-introduced corresponding SoC-specific config options, and on the current common config option, to relax dependencies. Rename the individual pin control driver source files from pfc-r8a7795-es1.c to pfc-r8a77950.c, and from pfc-r8a7795.c to pfc-r8a77951.c, and make them truly independent. As both SoCs share the same compatible value, special care must be taken to match them to the correct pin control driver, if support for it is included in the running kernel. This will allow making support for early R-Car H3 revisions optional, the largest share of which is taken by the pin control driver. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20191230083156.19191-1-geert+renesas@glider.be
2020-01-07pinctrl: artpec6: fix __iomem on reg in setBen Dooks (Codethink)
The artpec6_pconf_set should have marked reg as __iomem, which ends up making sparse complain about address space conversions. Add the __iomem to silence the following warnings: drivers/pinctrl/pinctrl-artpec6.c:814:13: warning: incorrect type in assignment (different address spaces) drivers/pinctrl/pinctrl-artpec6.c:814:13: expected unsigned int *reg drivers/pinctrl/pinctrl-artpec6.c:814:13: got void [noderef] <asn:2> * drivers/pinctrl/pinctrl-artpec6.c:825:34: warning: incorrect type in argument 1 (different address spaces) drivers/pinctrl/pinctrl-artpec6.c:825:34: expected void const volatile [noderef] <asn:2> *addr drivers/pinctrl/pinctrl-artpec6.c:825:34: got unsigned int *reg drivers/pinctrl/pinctrl-artpec6.c:827:25: warning: incorrect type in argument 2 (different address spaces) drivers/pinctrl/pinctrl-artpec6.c:827:25: expected void volatile [noderef] <asn:2> *addr drivers/pinctrl/pinctrl-artpec6.c:827:25: got unsigned int *reg drivers/pinctrl/pinctrl-artpec6.c:837:34: warning: incorrect type in argument 1 (different address spaces) drivers/pinctrl/pinctrl-artpec6.c:837:34: expected void const volatile [noderef] <asn:2> *addr drivers/pinctrl/pinctrl-artpec6.c:837:34: got unsigned int *reg drivers/pinctrl/pinctrl-artpec6.c:840:25: warning: incorrect type in argument 2 (different address spaces) drivers/pinctrl/pinctrl-artpec6.c:840:25: expected void volatile [noderef] <asn:2> *addr drivers/pinctrl/pinctrl-artpec6.c:840:25: got unsigned int *reg drivers/pinctrl/pinctrl-artpec6.c:850:34: warning: incorrect type in argument 1 (different address spaces) drivers/pinctrl/pinctrl-artpec6.c:850:34: expected void const volatile [noderef] <asn:2> *addr drivers/pinctrl/pinctrl-artpec6.c:850:34: got unsigned int *reg drivers/pinctrl/pinctrl-artpec6.c:853:25: warning: incorrect type in argument 2 (different address spaces) drivers/pinctrl/pinctrl-artpec6.c:853:25: expected void volatile [noderef] <asn:2> *addr drivers/pinctrl/pinctrl-artpec6.c:853:25: got unsigned int *reg drivers/pinctrl/pinctrl-artpec6.c:864:34: warning: incorrect type in argument 1 (different address spaces) drivers/pinctrl/pinctrl-artpec6.c:864:34: expected void const volatile [noderef] <asn:2> *addr drivers/pinctrl/pinctrl-artpec6.c:864:34: got unsigned int *reg drivers/pinctrl/pinctrl-artpec6.c:867:25: warning: incorrect type in argument 2 (different address spaces) drivers/pinctrl/pinctrl-artpec6.c:867:25: expected void volatile [noderef] <asn:2> *addr drivers/pinctrl/pinctrl-artpec6.c:867:25: got unsigned int *reg Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk> Link: https://lore.kernel.org/r/20191218101602.2442868-1-ben.dooks@codethink.co.uk [Changed unsigned int -> void for the reg pointer] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-07pinctrl: ingenic: Use devm_platform_ioremap_resource()Paul Cercueil
Use devm_platform_ioremap_resource() instead of platform_get_resource + devm_ioremap_resource. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20200106232711.559727-6-paul@crapouillou.net Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-07pinctrl: ingenic: Factorize irq_set_type functionPaul Cercueil
Simplify the code of the driver's irq_set_type() function by doing some factorization. The behaviour is unchanged. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20200106232711.559727-5-paul@crapouillou.net Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-07pinctrl: ingenic: Remove duplicated ingenic_chip_info structuresPaul Cercueil
Until there is the need to handle the JZ4760B and X1000E differently there is no reason to use a separate ingenic_chip_info since the data it contains is the same than for the JZ4760 and X1000 respectively. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20200106232711.559727-4-paul@crapouillou.net Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-07pinctrl: ingenic: Put ingenic_chip_info pointer in match dataPaul Cercueil
Instead of passing a numeric ID as match data, and retrieve a pointer to the ingenic_chip_info structure in an ugly succession of if/else in the probe function, get the pointer to the ingenic_chip_info structure directly from the match data, and store the numeric ID inside the ingenic_chip_info structure. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20200106232711.559727-3-paul@crapouillou.net Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-07pinctrl: ingenic: Remove platform ID tablePaul Cercueil
We enforce devicetree support in the Kconfig and all Ingenic boards without exception probe their drivers from devicetree. The code path to probe the driver from arch code can then be considered as dead code and removed. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20200106232711.559727-2-paul@crapouillou.net Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-07pinctrl: meson: meson8b: add the GPIOH pinmux settings for ETH_RXD{2,3}Martin Blumenstingl
GPIOH_5 and GPIOH_6 can have two Ethernet related functions: - GPIOH_5 can be ETH_TXD1 or ETH_RXD3 - GPIOH_6 can be ETH_TXD0 or ETH_RXD2 Add the bits for eth_rxd3_h and eth_rxd2_h so the ETH_RXD function can be disabled when using the ETH_TXD function of GPIOH_{5,6}. No problem was observed so far, but in theory this could lead to two different signals being routed to the same pad (which could break Ethernet). These settings were found in the public "Amlogic Ethernet controller user guide": http://openlinux.amlogic.com/@api/deki/files/75/=Amlogic_Ethenet_controller_user_Guide.pdf Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20191226191425.3797490-1-martin.blumenstingl@googlemail.com Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-07pinctrl: nuvoton: npcm7xx: constify copied structureJulia Lawall
The npcmgpio_irqchip structure is only copied into another structure, so make it const. The opportunity for this change was found using Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/1577864614-5543-17-git-send-email-Julia.Lawall@inria.fr Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-07pinctrl: qcom: ssbi-gpio: constify copied structureJulia Lawall
The pm8xxx_pinctrl_desc structure is only copied into another structure, so make it const. The opportunity for this change was found using Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/1577864614-5543-15-git-send-email-Julia.Lawall@inria.fr Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-07pinctrl: ssbi-mpp: constify copied structureJulia Lawall
The pm8xxx_pinctrl_desc structure is only copied into another structure, so make it const. The opportunity for this change was found using Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/1577864614-5543-9-git-send-email-Julia.Lawall@inria.fr Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-07pinctrl: meson: Fix wrong shift value when get drive-strengthQianggui Song
In meson_pinconf_get_drive_strength, variable bit is calculated by meson_calc_reg_and_bit, this value is the offset from the first pin of a certain bank to current pin, while Meson SoCs use two bits for each pin to depict drive-strength. So a left shift by 1 should be done or node pinconf-pins shows wrong message. Fixes: 6ea3e3bbef37 ("pinctrl: meson: add support of drive-strength-microamp") Signed-off-by: Qianggui Song <qianggui.song@amlogic.com> Link: https://lore.kernel.org/r/20191226023734.9631-1-qianggui.song@amlogic.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-07pinctrl: lochnagar: select GPIOLIBArnd Bergmann
In a rare randconfig build I came across one configuration that does not enable CONFIG_GPIOLIB, which is needed by lochnagar: ERROR: "devm_gpiochip_add_data" [drivers/pinctrl/cirrus/pinctrl-lochnagar.ko] undefined! ERROR: "gpiochip_generic_free" [drivers/pinctrl/cirrus/pinctrl-lochnagar.ko] undefined! ERROR: "gpiochip_generic_request" [drivers/pinctrl/cirrus/pinctrl-lochnagar.ko] undefined! ERROR: "gpiochip_get_data" [drivers/pinctrl/cirrus/pinctrl-lochnagar.ko] undefined! Add another 'select' like all other pinctrl drivers have. Fixes: 0548448b719a ("pinctrl: lochnagar: Add support for the Cirrus Logic Lochnagar") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20191218163701.171914-1-arnd@arndb.de Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-07pinctrl: armada-37xx: Remove unneeded semicolonMa Feng
Fixes coccicheck warning: drivers/pinctrl/mvebu/pinctrl-armada-37xx.c:736:2-3: Unneeded semicolon drivers/pinctrl/mvebu/pinctrl-armada-37xx.c:803:2-3: Unneeded semicolon Fixes: commit 5715092a458c ("pinctrl: armada-37xx: Add gpio support") commit 2f227605394b ("pinctrl: armada-37xx: Add irqchip support") Signed-off-by: Ma Feng <mafeng.ma@huawei.com> Link: https://lore.kernel.org/r/1576723865-111331-1-git-send-email-mafeng.ma@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-07pinctrl: qcom: make 'm_voc_groups' staticBen Dooks (Codethink)
The m_voc_groups is not declared outside of the driver, so make it static to avoid the following sparse wanrning: drivers/pinctrl/qcom/pinctrl-msm8976.c:592:12: warning: symbol 'm_voc_groups' was not declared. Should it be static? Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk> Link: https://lore.kernel.org/r/20191218102804.2487374-1-ben.dooks@codethink.co.uk Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-07pinctrl: sunxi: sun50i-h5 use platform_irq_countPeng Fan
platform_irq_count() is the more generic way (independent of device trees) to determine the count of available interrupts. So use this instead. As platform_irq_count() might return an error code (which of_irq_count doesn't) some additional handling is necessary. Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/1576672860-14420-2-git-send-email-peng.fan@nxp.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-07pinctrl: actions: remove duplicate dsi entryBen Dooks (Codethink)
The dsi entry is defined identically twice, so remove the second one to remove the sparse warning: drivers/pinctrl/actions/pinctrl-s700.c:1581:10: warning: Initializer entry defined twice drivers/pinctrl/actions/pinctrl-s700.c:1586:10: also defined here Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk> Link: https://lore.kernel.org/r/20191218102013.2465038-1-ben.dooks@codethink.co.uk Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-07pinctrl: tegra: fix missing __iomem in suspend/resumeBen Dooks (Codethink)
The functions should have __iomem on the register pointer so add that to silence the following sparse warnings: drivers/pinctrl/tegra/pinctrl-tegra.c:657:22: warning: incorrect type in assignment (different address spaces) drivers/pinctrl/tegra/pinctrl-tegra.c:657:22: expected unsigned int [usertype] *regs drivers/pinctrl/tegra/pinctrl-tegra.c:657:22: got void [noderef] <asn:2> * drivers/pinctrl/tegra/pinctrl-tegra.c:659:42: warning: incorrect type in argument 1 (different address spaces) drivers/pinctrl/tegra/pinctrl-tegra.c:659:42: expected void const volatile [noderef] <asn:2> *addr drivers/pinctrl/tegra/pinctrl-tegra.c:659:42: got unsigned int [usertype] * drivers/pinctrl/tegra/pinctrl-tegra.c:675:22: warning: incorrect type in assignment (different address spaces) drivers/pinctrl/tegra/pinctrl-tegra.c:675:22: expected unsigned int [usertype] *regs drivers/pinctrl/tegra/pinctrl-tegra.c:675:22: got void [noderef] <asn:2> * drivers/pinctrl/tegra/pinctrl-tegra.c:677:25: warning: incorrect type in argument 2 (different address spaces) drivers/pinctrl/tegra/pinctrl-tegra.c:677:25: expected void volatile [noderef] <asn:2> *addr drivers/pinctrl/tegra/pinctrl-tegra.c:677:25: got unsigned int [usertype] * Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk> Link: https://lore.kernel.org/r/20191218110456.2533088-1-ben.dooks@codethink.co.uk Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-06pinctrl: Ingenic: Add pinctrl driver for X1830.周琰杰 (Zhou Yanjie)
Add support for probing the pinctrl-ingenic driver on the X1830 Soc from Ingenic. Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Link: https://lore.kernel.org/r/1576426864-35348-7-git-send-email-zhouyanjie@wanyeetech.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-06pinctrl: Ingenic: Introduce reg_offset and use it instead hard code.周琰杰 (Zhou Yanjie)
Introduce "reg_offset", use it instead hard code "0x100", it will also be used for subsequent X1830 pinctrl driver. Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Link: https://lore.kernel.org/r/1576426864-35348-5-git-send-email-zhouyanjie@wanyeetech.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-06pinctrl: Ingenic: Add missing parts for X1000 and X1500.周琰杰 (Zhou Yanjie)
1.Add pinctrl drivers for the SPI flash controller (SFC) of X1000 and X1500. 2.Add pinctrl driver for the synchronous serial interface (SSI) of X1000. Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Link: https://lore.kernel.org/r/1576426864-35348-4-git-send-email-zhouyanjie@wanyeetech.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-06pinctrl: Ingenic: Fix bugs in X1000 and X1500.周琰杰 (Zhou Yanjie)
1.Fix the pullup parameter of X1000. 2.X1000 and X1500 have only one set of uart1 hwflow pin mapping, so modify "uart1_hwflow_d" to "uart1_hwflow". 3.X1000 has only one set of mmc1 pin mapping, so modify "mmc1-1bit-e/mmc1-4bit-e" to "mmc1-1bit/mmc1-4bit". 4.X1000 has only one regular externel memory controller that does not support nand flash, so change "nemc_" to "emc_". 5.X1500 has only one set of mmc, so modify "mmc0_" to "mmc_". Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Link: https://lore.kernel.org/r/1576426864-35348-3-git-send-email-zhouyanjie@wanyeetech.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-06remove ioremap_nocache and devm_ioremap_nocacheChristoph Hellwig
ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2019-12-31pinctrl: sh-pfc: sh7269: Fix CAN function GPIOsGeert Uytterhoeven
pinmux_func_gpios[] contains a hole due to the missing function GPIO definition for the "CTX0&CTX1" signal, which is the logical "AND" of the first two CAN outputs. A closer look reveals other issues: - Some functionality is available on alternative pins, but the PINMUX_DATA() entries is using the wrong marks, - Several configurations are missing. Fix this by: - Renaming CTX0CTX1CTX2_MARK, CRX0CRX1_PJ22_MARK, and CRX0CRX1CRX2_PJ20_MARK to CTX0_CTX1_CTX2_MARK, CRX0_CRX1_PJ22_MARK, resp. CRX0_CRX1_CRX2_PJ20_MARK for consistency with the corresponding enum IDs, - Adding all missing enum IDs and marks, - Use the right (*_PJ2x) variants for alternative pins, - Adding all missing configurations to pinmux_data[], - Adding all missing function GPIO definitions to pinmux_func_gpios[]. See SH7268 Group, SH7269 Group User’s Manual: Hardware, Rev. 2.00: [1] Table 1.4 List of Pins [2] Figure 23.29 Connection Example when Using Channels 0 and 1 as One Channel (64 Mailboxes × 1 Channel) and Channel 2 as One Channel (32 Mailboxes × 1 Channel), [3] Figure 23.30 Connection Example when Using Channels 0, 1, and 2 as One Channel (96 Mailboxes × 1 Channel), [4] Table 48.3 Multiplexed Pins (Port B), [5] Table 48.4 Multiplexed Pins (Port C), [6] Table 48.10 Multiplexed Pins (Port J), [7] Section 48.2.4 Port B Control Registers 0 to 5 (PBCR0 to PBCR5). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191218194812.12741-5-geert+renesas@glider.be
2019-12-31pinctrl: sh-pfc: sh7264: Fix CAN function GPIOsGeert Uytterhoeven
pinmux_func_gpios[] contains a hole due to the missing function GPIO definition for the "CTX0&CTX1" signal, which is the logical "AND" of the two CAN outputs. Fix this by: - Renaming CRX0_CRX1_MARK to CTX0_CTX1_MARK, as PJ2MD[2:0]=010 configures the combined "CTX0&CTX1" output signal, - Renaming CRX0X1_MARK to CRX0_CRX1_MARK, as PJ3MD[1:0]=10 configures the shared "CRX0/CRX1" input signal, which is fed to both CAN inputs, - Adding the missing function GPIO definition for "CTX0&CTX1" to pinmux_func_gpios[], - Moving all CAN enums next to each other. See SH7262 Group, SH7264 Group User's Manual: Hardware, Rev. 4.00: [1] Figure 1.2 (3) (Pin Assignment for the SH7264 Group (1-Mbyte Version), [2] Figure 1.2 (4) Pin Assignment for the SH7264 Group (640-Kbyte Version, [3] Table 1.4 List of Pins, [4] Figure 20.29 Connection Example when Using This Module as 1-Channel Module (64 Mailboxes x 1 Channel), [5] Table 32.10 Multiplexed Pins (Port J), [6] Section 32.2.30 (3) Port J Control Register 0 (PJCR0). Note that the last 2 disagree about PJ2MD[2:0], which is probably the root cause of this bug. But considering [4], "CTx0&CTx1" in [5] must be correct, and "CRx0&CRx1" in [6] must be wrong. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191218194812.12741-4-geert+renesas@glider.be
2019-12-31pinctrl: sh-pfc: sh7264: Fix Port K I/O Register 0 definitionGeert Uytterhoeven
The register definition block for the Port K I/O Register is accidentally using the defines for Port J. Replace them by the proper Port K defines. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191218194812.12741-3-geert+renesas@glider.be
2019-12-31pinctrl: sh-pfc: r8a7778: Fix duplicate SDSELF_B and SD1_CLK_BGeert Uytterhoeven
The FN_SDSELF_B and FN_SD1_CLK_B enum IDs are used twice, which means one set of users must be wrong. Replace them by the correct enum IDs. Fixes: 87f8c988636db0d4 ("sh-pfc: Add r8a7778 pinmux support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191218194812.12741-2-geert+renesas@glider.be
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-12 11:59:20 +0000