summaryrefslogtreecommitdiff
path: root/drivers/pinctrl
AgeCommit message (Collapse)Author
2016-11-07pinctrl-aspeed-g5: Never set SCU90[6]Andrew Jeffery
If a pin depending on bit 6 in SCU90 is requested for GPIO, the export will succeed but changes to the GPIO's value will not be accepted by the hardware. This is because the pinmux driver has misconfigured the SCU by writing 1 to the reserved bit. The description of SCU90[6] from the datasheet is 'Reserved, must keep at value ”0”'. The fix is to switch pinmux from the bit-flipping macro to explicitly configuring the .enable and .disable values to zero. The patch has been tested on an AST2500 EVB. Fixes: 56e57cb6c07f (pinctrl: Add pinctrl-aspeed-g5 driver) Reported-by: Uma Yadlapati <yadlapat@us.ibm.com> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-04pinctrl: cherryview: Prevent possible interrupt storm on resumeMika Westerberg
When the system is suspended to S3 the BIOS might re-initialize certain GPIO pins back to their original state or it may re-program interrupt mask of others. For example Acer TravelMate B116-M had BIOS bug where certain GPIO pin (MF_ISH_GPIO_5) was programmed to trigger on high level, and the pin state was high once the BIOS gave control to the OS on resume. This triggers lots of messages like: irq 117, desc: ffff88017a61e600, depth: 1, count: 0, unhandled: 0 ->handle_irq(): ffffffff8109b613, handle_bad_irq+0x0/0x1e0 ->irq_data.chip(): ffffffffa0020180, chv_pinctrl_exit+0x2d84/0x12 [pinctrl_cherryview] ->action(): (null) IRQ_NOPROBE set We reset the mask back to known state in chv_pinctrl_resume() but that is called only after device interrupts have already been enabled. Now, this particular issue was fixed by upgrading the BIOS to the latest (v1.23) but not everybody upgrades their BIOSes so we fix it up in the driver as well. Prevent the possible interrupt storm by moving suspend and resume hooks to be called at _noirq time instead. Since device interrupts are still disabled we can restore the mask back to known state before interrupt storm happens. Cc: stable@vger.kernel.org Reported-by: Christian Steiner <christian.steiner@outlook.de> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-04pinctrl: cherryview: Serialize register access in suspend/resumeMika Westerberg
If async suspend is enabled, the driver may access registers concurrently with another instance which may fail because of the bug in Cherryview GPIO hardware. Prevent this by taking the shared lock while accessing the hardware in suspend and resume hooks. Cc: stable@vger.kernel.org Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-31pinctrl: imx: reset group index on probeStefan Agner
Group index is incremented on every new group parsed. Since the field is part of struct imx_pinctrl_soc_info, which is typically a global variable passed by the individual pinctrl-imx.c based driver, it does not get cleared automatically when re-probing the driver. This lead imx_pinctrl_parse_functions passing a group pointer which is outside of the allocated group space on second probe and onwards. Typically this ended up in a NULL pointer dereference when accessing the name field like this: Unable to handle kernel NULL pointer dereference at virtual address 00000000 ... PC is at strcmp+0x18/0x44 LR is at imx_dt_node_to_map+0xc4/0x290 Avoid this by setting group_index to 0 on probe. This has been observed when using DEBUG_TEST_DRIVER_REMOVE. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-31pinctrl: stm32: remove dependency with interrupt controllerAlexandre TORGUE
This patch allows to probe stm32 pinctrl driver even if no interrupt controller is defined to manage gpio irqs. Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-31pinctrl: st: don't specify default interrupt triggerPatrice Chotard
Thanks to 332e99d5ae4 which now alerts of default trigger usage when configuring interrupts. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-31pinctrl: iproc: Fix iProc and NSP GPIO supportRay Jui
Since commit 44a7185c2ae6 ("of/platform: Add common method to populate default bus"), ARM64 platform devices are populated at the arch_initcall_sync level; as a result, the platform_driver_probe calls in both the iProc and NSP GPIO drivers fail with -ENODEV since by that time the platform device was not yet registered. Replace platform_driver_probe with platform_driver_register, that allow the device to be register later Fixes: 44a7185c2ae6 ("of/platform: Add common method to populate default bus") Signed-off-by: Ray Jui <ray.jui@broadcom.com> Tested-by: Eric Anholt <eric@anholt.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-18pinctrl: intel: Only restore pins that are used by the driverMika Westerberg
Dell XPS 13 (and maybe some others) uses a GPIO (CPU_GP_1) during suspend to explicitly disable USB touchscreen interrupt. This is done to prevent situation where the lid is closed the touchscreen is left functional. The pinctrl driver (wrongly) assumes it owns all pins which are owned by host and not locked down. It is perfectly fine for BIOS to use those pins as it is also considered as host in this context. What happens is that when the lid of Dell XPS 13 is closed, the BIOS configures CPU_GP_1 low disabling the touchscreen interrupt. During resume we restore all host owned pins to the known state which includes CPU_GP_1 and this overwrites what the BIOS has programmed there causing the touchscreen to fail as no interrupts are reaching the CPU anymore. Fix this by restoring only those pins we know are explicitly requested by the kernel one way or other. Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=176361 Reported-by: AceLan Kao <acelan.kao@canonical.com> Tested-by: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-18pinctrl: baytrail: Fix lockdepVille Syrjälä
Initialize the spinlock before using it. INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.8.0-dwc-bisect #4 Hardware name: Intel Corp. VALLEYVIEW C0 PLATFORM/BYT-T FFD8, BIOS BLAKFF81.X64.0088.R10.1403240443 FFD8_X64_R_2014_13_1_00 03/24/2014 0000000000000000 ffff8800788ff770 ffffffff8133d597 0000000000000000 0000000000000000 ffff8800788ff7e0 ffffffff810cfb9e 0000000000000002 ffff8800788ff7d0 ffffffff8205b600 0000000000000002 ffff8800788ff7f0 Call Trace: [<ffffffff8133d597>] dump_stack+0x67/0x90 [<ffffffff810cfb9e>] register_lock_class+0x52e/0x540 [<ffffffff810d2081>] __lock_acquire+0x81/0x16b0 [<ffffffff810cede1>] ? save_trace+0x41/0xd0 [<ffffffff810d33b2>] ? __lock_acquire+0x13b2/0x16b0 [<ffffffff810cf05a>] ? __lock_is_held+0x4a/0x70 [<ffffffff810d3b1a>] lock_acquire+0xba/0x220 [<ffffffff8136f1fe>] ? byt_gpio_get_direction+0x3e/0x80 [<ffffffff81631567>] _raw_spin_lock_irqsave+0x47/0x60 [<ffffffff8136f1fe>] ? byt_gpio_get_direction+0x3e/0x80 [<ffffffff8136f1fe>] byt_gpio_get_direction+0x3e/0x80 [<ffffffff813740a9>] gpiochip_add_data+0x319/0x7d0 [<ffffffff81631723>] ? _raw_spin_unlock_irqrestore+0x43/0x70 [<ffffffff8136fe3b>] byt_pinctrl_probe+0x2fb/0x620 [<ffffffff8142fb0c>] platform_drv_probe+0x3c/0xa0 ... Based on the diff it looks like the problem was introduced in commit 71e6ca61e826 ("pinctrl: baytrail: Register pin control handling") but I wasn't able to verify that empirically as the parent commit just oopsed when I tried to boot it. Cc: Cristina Ciocan <cristina.ciocan@intel.com> Cc: stable@vger.kernel.org Fixes: 71e6ca61e826 ("pinctrl: baytrail: Register pin control handling") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-18pinctrl: aspeed-g5: Fix pin association of SPI1 functionAndrew Jeffery
The SPI1 function was associated with the wrong pins: The functions that those pins provide is either an SPI debug or passthrough function coupled to SPI1. Make the SPI1 mux function configure the relevant pins and associate new SPI1DEBUG and SPI1PASSTHRU functions with the pins that were already defined. The notation used in the datasheet's multi-function pin table for the SoC is often creative: in this case the SYS* signals are enabled by a single bit, which is nothing unusual on its own, but in this case the bit was also participating in a multi-bit bitfield and therefore represented multiple functions. This fact was overlooked in the original patch. Fixes: 56e57cb6c07f (pinctrl: Add pinctrl-aspeed-g5 driver) Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-18pinctrl: aspeed-g5: Fix GPIOE1 typoAndrew Jeffery
This prevented C20 from successfully being muxed as GPIO. Fixes: 56e57cb6c07f (pinctrl: Add pinctrl-aspeed-g5 driver) Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-18pinctrl: aspeed-g5: Fix names of GPID2 pinsAndrew Jeffery
Fixes simple typos in the initial commit. There is no behavioural change. Fixes: 56e57cb6c07f (pinctrl: Add pinctrl-aspeed-g5 driver) Reported-by: Xo Wang <xow@google.com> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-18pinctrl: aspeed: "Not enabled" is a significant mux stateAndrew Jeffery
Consider a scenario with one pin P that has two signals A and B, where A is defined to be higher priority than B: That is, if the mux IP is in a state that would consider both A and B to be active on P, then A will be the active signal. To instead configure B as the active signal we must configure the mux so that A is inactive. The mux state for signals can be described by logical operations on one or more bits from one or more registers (a "signal expression"), which in some cases leads to aliased mux states for a particular signal. Further, signals described by multi-bit bitfields often do not only need to record the states that would make them active (the "enable" expressions), but also the states that makes them inactive (the "disable" expressions). All of this combined leads to four possible states for a signal: 1. A signal is active with respect to an "enable" expression 2. A signal is not active with respect to an "enable" expression 3. A signal is inactive with respect to a "disable" expression 4. A signal is not inactive with respect to a "disable" expression In the case of P, if we are looking to activate B without explicitly having configured A it's enough to consider A inactive if all of A's "enable" signal expressions evaluate to "not active". If any evaluate to "active" then the corresponding "disable" states must be applied so it becomes inactive. For example, on the AST2400 the pins composing GPIO bank H provide signals ROMD8 through ROMD15 (high priority) and those for UART6 (low priority). The mux states for ROMD8 through ROMD15 are aliased, i.e. there are two mux states that result in the respective signals being configured: A. SCU90[6]=1 B. Strap[4,1:0]=100 Further, the second mux state is a 3-bit bitfield that explicitly defines the enabled state but the disabled state is implicit, i.e. if Strap[4,1:0] is not exactly "100" then ROMD8 through ROMD15 are not considered active. This requires the mux function evaluation logic to use approach 2. above, however the existing code was using approach 3. The problem was brought to light on the Palmetto machines where the strap register value is 0x120ce416, and prevented GPIO requests in bank H from succeeding despite the hardware being in a position to allow them. Fixes: 318398c09a8d ("pinctrl: Add core pinctrl support for Aspeed SoCs") Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-07Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "Driver updates for ARM SoCs, including a couple of newly added drivers: - The Qualcomm external bus interface 2 (EBI2), used in some of their mobile phone chips for connecting flash memory, LCD displays or other peripherals - Secure monitor firmware for Amlogic SoCs, and an NVMEM driver for the EFUSE based on that firmware interface. - Perf support for the AppliedMicro X-Gene performance monitor unit - Reset driver for STMicroelectronics STM32 - Reset driver for SocioNext UniPhier SoCs Aside from these, there are minor updates to SoC-specific bus, clocksource, firmware, pinctrl, reset, rtc and pmic drivers" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (50 commits) bus: qcom-ebi2: depend on HAS_IOMEM pinctrl: mvebu: orion5x: Generalise mv88f5181l support for 88f5181 clk: mvebu: Add clk support for the orion5x SoC mv88f5181 dt-bindings: EXYNOS: Add Exynos5433 PMU compatible clocksource: exynos_mct: Add the support for ARM64 perf: xgene: Add APM X-Gene SoC Performance Monitoring Unit driver Documentation: Add documentation for APM X-Gene SoC PMU DTS binding MAINTAINERS: Add entry for APM X-Gene SoC PMU driver bus: qcom: add EBI2 driver bus: qcom: add EBI2 device tree bindings rtc: rtc-pm8xxx: Add support for pm8018 rtc nvmem: amlogic: Add Amlogic Meson EFUSE driver firmware: Amlogic: Add secure monitor driver soc: qcom: smd: Reset rx tail rather than tx memory: atmel-sdramc: fix a possible NULL dereference reset: hi6220: allow to compile test driver on other architectures reset: zynq: add driver Kconfig option reset: sunxi: add driver Kconfig option reset: stm32: add driver Kconfig option reset: socfpga: add driver Kconfig option ...
2016-10-05Merge tag 'gpio-v4.9-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.9 series: Subsystem improvements: - do away with the last users of the obsolete Kconfig options ARCH_REQUIRE_GPIOLIB and ARCH_WANT_OPTIONAL_GPIOLIB (the latter always sounded like an item on a wishlist to Santa Claus to me). We can now select GPIOLIB and be done with it, for all archs. After some struggle it even work on UM. Not that it has GPIO, but if it wants to, it can select the library. - continued efforts to make drivers properly either tristate or bool. - introduce a warning for drivers assigning default triggers to their irqchip lines when probed from device tree, so we find and fix these ambigous drivers. It is agreed that in the OF config path, the device tree defines trigger characteristics. - the same warning, mutatis mutandis, for ACPI-probed GPIO irqchips. - we introduce the ability to mark certain IRQ lines as "unusable" as they can be taken by BIOS/firmware, unrouted in silicon and generally nasty if you use them, and such things. This is put to good use in the STMPE driver and also in the Cherryview pin control driver. - a new "mockup" virtual GPIO device that can be used for testing. The plan is to add unit tests under tools/* for exercising this device and verify that the kernel code paths are working as they should. - make memory-mapped I/O-drivers depend on HAS_IOMEM. This was implicit all the time, but when people started building UM with allyesconfig or allmodconfig it exploded in their face. - move some stray bits of device tree and ACPI HW description callbacks down into their respective implementation silo. These were causing issues when compiling on !HAS_IOMEM as well, so now eventually UM compiles the GPIOLIB library if it wants to. New drivers: - new driver for the Aspeed GPIO front-end companion to the pin controller merged through the pin control tree. - new driver for the LP873x PMIC GPIO portions. - new driver for Technologic Systems' I2C FPGA GPIO such as TS4900, TS-7970, TS-7990 and TS-4100. - new driver for the Broadcom BCM63xx series including BCM6338 and BCM6345. - new driver for the Intel WhiskeyCove PMIC GPIO. - new driver for the Allwinner AXP209 PMIC GPIO portions. - new driver for Diamond Systems 48 line GPIO-MM, another of these port-mapped I/O expansion cards. - support the STMicroelectronics STMPE1600 variant in the STMPE driver. Driver improvements: - the STMPE driver now supports rising/falling edge detection properly for IRQs. - the PCA954x will now fetch and enable its VCC regulator properly. - major rework of the PCA953x driver with the goal of eventually switching it over to use regmap and thus modernize it even more. - switch the IOP driver to use the generic MMIO GPIO library. - move the ages old HTC EGPIO (extended GPIO) GPIO expander driver over to this subsystem from MFD, achieveing some separation of concerns" * tag 'gpio-v4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (81 commits) gpio: add missing static inline gpio: OF: localize some gpiochip init functions gpio: acpi: separation of concerns gpio: OF: separation of concerns gpio: make memory-mapped drivers depend on HAS_IOMEM gpio: stmpe: use BIT() macro gpio: stmpe: forbid unused lines to be mapped as IRQs mfd/gpio: Move HTC GPIO driver to GPIO subsystem gpio: MAINTAINERS: Add an entry for GPIO mockup driver gpio/mockup: add virtual gpio device gpio: Added zynq specific check for special pins on bank zero gpio: axp209: Implement get_direction gpio: aspeed: remove redundant return value check gpio: loongson1: remove redundant return value check ARM: omap2: fix missing include gpio: tc3589x: fix up complaints on unsigned gpio: tc3589x: add .get_direction() and small cleanup gpio: f7188x: use gpiochip_get_data instead of container_of gpio: tps65218: use devm_gpiochip_add_data() for gpio registration gpio: aspeed: fix return value check in aspeed_gpio_probe() ...
2016-10-04pinctrl: qcom: fix masking of pinmux functionsJohn Crispin
The following commit introduced a regression by not properly masking the calculated value. Fixes: 47a01ee9a6c3 ("pinctrl: qcom: Clear all function selection bits") Signed-off-by: John Crispin <john@phrozen.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-03gpio: acpi: separation of concernsLinus Walleij
The generic GPIO library directly implement code for acpi_find_gpio() which is only used with CONFIG_ACPI. This was probably done because OF did the same thing, but I removed that so remove this too. Rename the internal acpi_find_gpio() in gpiolib-acpi.c to acpi_populate_gpio_lookup() which seems to be more appropriate anyway so as to avoid a namespace clash with the same function. Make the stub return -ENOENT rather than -ENOSYS (as that is for syscalls!). For some reason the sunxi pin control driver was including the private gpiolib header, it works just fine without it so remove that oneliner. Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-23Merge branch 'fixes' into develLinus Walleij
2016-09-23pinctrl: intel: Configure GPIO chip IRQ as wakeup interruptsNilesh Bacchewar
On some Intel BXT platform, wake-up from suspend-to-idle on pressing power-button is not working. Its noticed that gpio-keys driver marking the second level IRQ/power-button as wake capable but Intel pintctrl driver is missing to mark GPIO chip/controller IRQ which first level IRQ as wake cable if its GPIO pin IRQ is wakeble. So, though the first level IRQ gets generated on power-button press, since it is not marked as wake capable resume/wake-up flow is not happening. Intel pintctrl/GPIO driver need to mark GPIO chip/controller IRQ (first level IRQ) as wake capable iff GPIO pin's IRQ (second level IRQ) is marked as wake cable. Changes in v2: - Add missing irq initialisation. Signed-off-by: Nilesh Bacchewar <nilesh.bacchewar@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-23pinctrl: cherryview: Convert to use devm_gpiochip_add_data()Mika Westerberg
This simplifies the error handling and allows us to drop the whole chv_pinctrl_remove() function. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-23pinctrl: cherryview: Do not add all southwest and north GPIOs to IRQ domainMika Westerberg
It turns out that for north and southwest communities, they can only generate GPIO interrupts for lower 8 interrupts (IntSel value). The upper part (8-15) can only generate GPEs (General Purpose Events). Now the reason why EC events such as pressing hotkeys does not work if we mask all the interrupts is that in order to generate either interrupts or GPEs the INTMASK register must have that particular interrupt unmasked. In case of GPEs the CPU does not trigger normal interrupt (and thus the GPIO driver does not see it) but instead it causes SCI (System Control Interrupt) to be triggered with the GPE in question set. To make this all work as expected we only add those GPIOs to the IRQ domain that can actually generate interrupts (IntSel value 0-7) and skip others. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-23Merge tag 'v4.8-rc6' into develLinus Walleij
Linux 4.8-rc6
2016-09-21Merge tag 'mvebu-drivers-4.9-1' of git://git.infradead.org/linux-mvebu into ↵Arnd Bergmann
next/drivers Pull "mvebu drivers for 4.9 (part 1)" from Gregory CLEMENT: - Add pinctrl and clk support for the Orion5x SoC mv88f5181 variant * tag 'mvebu-drivers-4.9-1' of git://git.infradead.org/linux-mvebu: pinctrl: mvebu: orion5x: Generalise mv88f5181l support for 88f5181 clk: mvebu: Add clk support for the orion5x SoC mv88f5181
2016-09-21pinctrl: mvebu: orion5x: Generalise mv88f5181l support for 88f5181Jamie Lentin
As far as I'm aware the mv88f5181-b1 and mv88f5181l are the same at the pinctrl level, so re-use the definitions for both. [gregory.clement@free-electrons.com: fix commit title] Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-09-19pinctrl: nomadik: don't default-flag IRQs as fallingLinus Walleij
There is no point in adding any default trigger for these GPIO interrupts: the device tree should contain all trigger information and the platforms using the driver boots exclusively from device tree. Also the boot log is nagging me to fix this: [ 0.771057] ------------[ cut here ]------------ [ 0.775695] WARNING: CPU: 0 PID: 1 at ../drivers/gpio/gpiolib.c:1622 _gpiochip_irqchip_add+0x138/0x160 [ 0.785034] /soc/gpio@8012e000: Ignoring 2 default trigger (...) [ 0.942962] gpio 8012e000.gpio: at address e08f8000 (etc ad nauseam) Suggested-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-15pinctrl: st: Remove STiH415/6 SoC pinctrl driver support.Peter Griffin
STiH415/6 SoC support is being removed from the kernel. This patch updates the ST pinctrl driver and removes references to these obsolete platforms. As some structures referenced by STiH407 based configuration were shared with STiH416 we update these names to match the remaining supported platform. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Cc: <linus.walleij@linaro.org> Cc: <linux-gpio@vger.kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-15pinctrl: amlogic: gxbb: add i2c pinsJerome Brunet
Add EE domains pins for the i2c devices A,B,C Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-15pinctrl: amlogic: gxbb: add nand pinsJerome Brunet
Add EE domains pins for the NAND flash controller. Even tough we have no driver for the NAND flash controller yet, we need to have these pins in pinctrl as the actual pin are shared with the spifc controller. The bootloader on the S905-P200 setup pinmux for the NAND controller so we need the kernel to properly deactivate this if necessary. Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-15pinctrl: stm32: add IRQ_DOMAIN_HIERARCHY dependencyArnd Bergmann
The newly added irqchip support for the stm32 pinctrl driver uses hierarchical IRQ domains as provided by the NVIC primary irqchip. This works great for any configuration that may be relevant on stm32, but when doing compile-testing (randconfig), we can enable it without NVIC or any other primary irqchip that enables IRQ_DOMAIN_HIERARCHY: drivers/pinctrl/stm32/pinctrl-stm32.c:212:13: error: 'irq_chip_eoi_parent' undeclared here (not in a function) drivers/pinctrl/stm32/pinctrl-stm32.c:213:20: error: 'irq_chip_mask_parent' undeclared here (not in a function) drivers/pinctrl/stm32/pinctrl-stm32.c:214:20: error: 'irq_chip_unmask_parent' undeclared here (not in a function) drivers/pinctrl/stm32/pinctrl-stm32.c:215:20: error: 'irq_chip_set_type_parent' undeclared here (not in a function) This adds a Kconfig dependency to limit compile-testing to configurations that have IRQ_DOMAIN_HIERARCHY already enabled. It's not obvious whether we should use 'depends on' or 'select' here, I think either one works, with 'depends on' being more intuitive, while 'select' would be less likely to cause dependency loops. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 0eb9f683336d ("pinctrl: Add IRQ support to STM32 gpios") Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-15pinctrl: amlogic: gxbb: add spi nor pinsJerome Brunet
Add EE domains pins for the SPI flash controller Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-14Merge tag 'sh-pfc-for-v4.9-tag3' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel pinctrl: sh-pfc: Updates for v4.9 (take three) - Return pinconf with arguments in packed format, - MSIOF and QSPI pin groups on R-Car V2H, - Voltage switching for SDHI on R-Car M2-W, E2, and M3-W.
2016-09-14pinctrl: sh-pfc: r8a7794: Implement voltage switching for SDHISimon Horman
All the SHDIs can operate with either 3.3V or 1.8V signals, depending on negotiation with the card. Based on work by Wolfram Sang for the r8a7790. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-09-14pinctrl: sh-pfc: r8a7791: Implement voltage switching for SDHISimon Horman
All the SHDIs can operate with either 3.3V or 1.8V signals, depending on negotiation with the card. Based on work by Wolfram Sang for the r8a7790. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-09-14pinctrl: sh-pfc: Add PORT_GP_24 helper macroSimon Horman
This follows the style of existing PORT_GP_X macros and will be used by a follow-up patch for the r8a7791 SoC. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-09-13pinctrl: meson-gxbb: add the missing SDIO interrupt pinMartin Blumenstingl
This adds the SDIO interrupt pin which can be used by sd_emmc_a. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Suggested-by: Neil Armstrong <narmstrong@baylibre.com> Fixes: 29885a656511 ("pinctrl: meson-gxbb: add the pins for the SDIO/sd_emmc_a controller") Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-13pinctrl: aspeed: fix regmap error handlingArnd Bergmann
The newly added aspeed driver tries to check for a negative return value from a pinctrl function, but stores the intermediate value in a 'bool' variable, which cannot work: drivers/pinctrl/aspeed/pinctrl-aspeed.c: In function 'aspeed_sig_expr_set': drivers/pinctrl/aspeed/pinctrl-aspeed.c:192:11: error: comparison of constant '0' with boolean expression is always false [-Werror=bool-compare] This slightly reworks the logic to use an explicit comparison with zero before assigning to the temporary variable. Reported-by: Colin King <colin.king@canonical.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-13pinctrl: mediatek: constify gpio_chip structuresJulia Lawall
These structures are only used to copy into other structures, so declare them as const. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct gpio_chip i@p = { ... }; @ok@ identifier r.i; expression e; position p; @@ e = i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct gpio_chip e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct gpio_chip i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-13pinctrl: stm32: constify gpio_chip structuresJulia Lawall
These structures are only used to copy into other structures, so declare them as const. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct gpio_chip i@p = { ... }; @ok@ identifier r.i; expression e; position p; @@ e = i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct gpio_chip e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct gpio_chip i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-13pinctrl/amd: switch to using a bool for levelAgrawal, Nitesh-kumar
The earlier patch can be simplified by using a bool to indicate level trigger. Reviewed-by: Pankaj Sen <Pankaj.Sen@amd.com> Signed-off-by: Nitesh Kumar Agrawal <Nitesh-kumar.Agrawal@amd.com> [Fixup to earlier manually applied patch] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-13pinctrl: Add IRQ support to STM32 gpiosAlexandre TORGUE
This patch adds IRQ support to STM32 gpios. The EXTI controller has 16 lines dedicated to GPIOs. EXTI line n can be connected to only line n of one of the GPIO ports, for example EXTI0 can be connected to either PA0, or PB0, or PC0... This port selection is done by specifying the port number into System Config registers. Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-12pinctrl: samsung: Remove an always false dev->of_node testSylwester Nawrocki
samsung_pinctrl_probe() can be called only after matching the driver by the compatible string so this already implies a non null dev->of_node. Remove the always false test and related error trace. While at it drop another error log in case of memory allocation failure - any errors are logged by the memory subsystem. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-12pinctrl: intel: merrifield: fix dup size in probeVincent Stehlé
In function mrfld_pinctrl_probe(), when duplicating the mrfld_families array the requested memory region length is multiplied once too many by the number of elements in the original array. Fix this to spare some memory. Fixes: 4e80c8f505741cbd ("pinctrl: intel: Add Intel Merrifield pin controller support") Signed-off-by: Vincent Stehlé <vincent.stehle@intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-12pinctrl: imx: accept gpio request/free from pinctrlVladimir Zapolskiy
While only Freescale Vybrid SoC has settings of GPIO capabilities done by iomux controller, it is only a matter of GPIO controller driver implementation for the rest of Freescale/NXP SoCs from iMX series. As a practical example on GPIO request a pad function should be switched to GPIO, but because this requires updates to all particular iMX pinctrl drivers, for simplicity at the moment add only a proper connection between shared pinctrl-imx and pinctrl/pinmux core, namely .gpio_request_enable/.gpio_disable_free/.gpio_set_direction callbacks should return success to a caller. This change allows to progress by adding request/free callbacks into gpio-mxc.c driver. Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-12pinctrl/at91: Don't provide a default trigger typeMarc Zyngier
at91 used to set a default trigger type for GPIO interrupts in order to cope with the old board files. These days are long gone, and it all gets probed through DT. Andras Szemzo reported that the Ethernet device on his board was bailing to be probed, due to a conflict in interrupt trigger. Surely enough, this is due to this default trigger still being present, and turning this into a IRQ_TYPE_NONE fixes the issue. Reported-by: Andras Szemzo <szemzo.andras@gmail.com> Tested-by: Andras Szemzo <szemzo.andras@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-12pinctrl: sh-pfc: r8a7796: Add voltage switch operations for SDHISimon Horman
This patch supports the {get,set}_io_voltage operations of SDHI. This operates the POCCTRL0 register on R8A7796 SoC and makes 1.8v/3.3v voltage switch. Based on work by Takeshi Kihara and Wolfram Sang. Cc: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-09-12pinctrl: sh-pfc: Return pinconf with arguments in packed formatNiklas Söderlund
The pinconf-generic code expects configurations with arguments to be returned in a packed format in order to be displayed properly by pinconf_generic_dump_one(). Reading /sys/kernel/debug/pinctrl/e6060000.pfc/pinconf-pins on r8a7795/salvator-x now shows: pin 101 (GP_3_5): output drive strength (9 mA), pin power source (3300 selector) Instead of: pin 101 (GP_3_5): output drive strength (0 mA), pin power source (0 selector) Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-09-12pinctrl: sh-pfc: r8a7792: Add MSIOF pin groupsSergei Shtylyov
Add MSIOF0/1 pin groups to the R8A7792 PFC driver. Based on the original (and large) patch by Vladimir Barinov <vladimir.barinov@cogentembedded.com>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-09-12pinctrl: sh-pfc: r8a7792: Add QSPI pin groupsSergei Shtylyov
Add QSPI pin groups to the R8A7792 PFC driver. Based on the original (and large) patch by Vladimir Barinov <vladimir.barinov@cogentembedded.com>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-09-08pinctrl: sunxi: Remove unsupported PWM channel pinmux in H3Milo Kim
H3 has single PWM channel. The second PWM channel is not supported, so the pinctrl function should be removed. Signed-off-by: Milo Kim <woogyom.kim@gmail.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-07pinctrl: bcm281xx: constify pinctrl_ops and pinmux_ops structuresJulia Lawall
Check for pinctrl_ops and pinmux_ops structures that are only stored in the pctlops field and the pmxops field, respectively, of a pinctrl_desc structure. These fields are declared const, so pinctrl_ops and pinmux_ops structures that have this property can be declared as const also. The semantic patch that makes this change in the pinctrl_ops is as follows. The pinmux_ops case is similar. (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct pinctrl_ops i@p = { ... }; @ok@ identifier r.i; struct pinctrl_desc e; position p; @@ e.pctlops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct pinctrl_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct pinctrl_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>