summaryrefslogtreecommitdiff
path: root/drivers/pinctrl
AgeCommit message (Collapse)Author
2016-09-07pinctrl: nsp: constify pinctrl_ops and pinmux_ops structuresJulia Lawall
Check for pinctrl_ops and pinmux_ops structures that are only stored in the pctlops field and the pmxops field, respectively, of a pinctrl_desc structure. These fields are declared const, so pinctrl_ops and pinmux_ops structures that have this property can be declared as const also. The semantic patch that makes this change in the pinctrl_ops is as follows. The pinmux_ops case is similar. (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct pinctrl_ops i@p = { ... }; @ok@ identifier r.i; struct pinctrl_desc e; position p; @@ e.pctlops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct pinctrl_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct pinctrl_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-07pinctrl: ns2: constify pinctrl_ops and pinmux_ops structuresJulia Lawall
Check for pinctrl_ops and pinmux_ops structures that are only stored in the pctlops field and the pmxops field, respectively, of a pinctrl_desc structure. These fields are declared const, so pinctrl_ops and pinmux_ops structures that have this property can be declared as const also. The semantic patch that makes this change in the pinctrl_ops is as follows. The pinmux_ops case is similar. (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct pinctrl_ops i@p = { ... }; @ok@ identifier r.i; struct pinctrl_desc e; position p; @@ e.pctlops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct pinctrl_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct pinctrl_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-07pinctrl/amd: Configure GPIO register using BIOS settingsAgrawal, Nitesh-kumar
In the function amd_gpio_irq_set_type, use the settings provided by the BIOS,when the LevelTrig is Edge and activeLevel is HIGH, to configure the GPIO registers. Ignore the settings from client. Reviewed-by: Pankaj Sen <Pankaj.Sen@amd.com> Signed-off-by:Nitesh Kumar Agrawal <Nitesh-kumar.Agrawal@amd.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-07pinctrl: sunxi: Add GR8 controller supportMylène Josserand
Just like the other member of the sunxi family, let's add a pinctrl table for the muxing options. Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-07pinctrl: Add pinctrl-aspeed-g5 driverAndrew Jeffery
A small subset of pins and functions are exposed. The selection of pins and functions is driven by the development of OpenBMC[1] on the AST2500 SoC, particularly around booting the IBM Witherspoon platform. [1] https://github.com/openbmc/docs Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-07pinctrl: Add pinctrl-aspeed-g4 driverAndrew Jeffery
A subset of the pins and functions are exposed. The selection of functions and pins is driven by the development of OpenBMC[1] on the AST2400 SoC, particularly around booting the OpenPOWER Palmetto development machine. [1] https://github.com/openbmc/docs Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-07pinctrl: Add core support for Aspeed SoCsAndrew Jeffery
The Aspeed SoCs typically provide more than 200 pins for GPIO and other functions. The signal enabled on a pin is determined on a priority basis, where a given pin can provide a number of different signal types. In addition to the priority levels, the Aspeed pin controllers describe the signal active on a pin by compound logical expressions involving multiple operators, registers and bits. Some difficulty arises as a pin's function bit masks for each priority level are frequently not the same (i.e. we cannot just flip a bit to change from a high to low priority signal), or even in the same register(s). Some configuration bits affect multiple pins, while in other cases the signals for a bus must each be enabled individually. Together, these features give rise to some complexity in the implementation. A more complete description of the complexities is provided in the associated header file. The patch doesn't implement pinctrl/pinmux/pinconf for any particular Aspeed SoC, rather it adds the framework for defining pinmux configurations. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-07pinctrl: meson-gxbb: add the pins for the SDIO/sd_emmc_a controllerMartin Blumenstingl
sd_emmc_a is used a controller for the SDIO modules. This adds the pin configuration for the SDIO controller. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-06pinctrl: zynq: fix typo in sdio1_3_grp pin listDaniel Glöckner
It contains pin 50 instead of pin 40. Signed-off-by: Daniel Glöckner <dg@emlix.com> Reviewed-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-06Merge tag 'sh-pfc-for-v4.9-tag2' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel pinctrl: sh-pfc: Add support for R-Car M3-W Add initial support for the Pin Function Controller on the Renesas R-Car M3-W SoC: - Basic definitions, - SCIF (serial) pins, groups and functions, - SDHI pins, groups and functions.
2016-09-06pinctrl: imx: output one pin/config pair per line in pinconf-groupsVladimir Zapolskiy
cat /sys/kernel/debug/pinctrl/${pinctrl}/pinconf-groups output is hardly readable, if a pin group contains more than one pin the output is glued and looks like this: MX6Q_PAD_SD1_DAT0: 0x17071MX6Q_PAD_SD1_CMD: 0x17071MX6Q_PAD_SD1_CLK: 0x17071 Add two space indentation and a new line separator to improve readability of the output. Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-27pinctrl: sirf: make core support explicitly non-modularPaul Gortmaker
The Makefile currently controlling compilation of this code is: drivers/pinctrl/sirf/pinctrl-sirf.o --> drivers/pinctrl/sirf/Makefile:obj-y += pinctrl-sirf.o ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modular infrastructure use, so that when reading the driver there is no doubt it is builtin-only. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Rongjun Ying <rongjun.ying@csr.com> Cc: Yuping Luo <yuping.luo@csr.com> Cc: Barry Song <baohua@kernel.org> Cc: linux-gpio@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-27pinctrl: sirf: make atlas7 explicitly non-modularPaul Gortmaker
The Makefile currently controlling compilation of this code is: drivers/pinctrl/sirf/pinctrl-atlas7.o ---> drivers/pinctrl/sirf/Makefile:obj-y += pinctrl-atlas7.o ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modular infrastructure use, so that when reading the driver there is no doubt it is builtin-only. We delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Barry Song <baohua@kernel.org> Cc: linux-gpio@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-27pinctrl: rockchip: make it explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: drivers/pinctrl/Kconfig:config PINCTRL_ROCKCHIP drivers/pinctrl/Kconfig: bool ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modular infrastructure use, so that when reading the driver there is no doubt it is builtin-only. Note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Heiko Stuebner <heiko@sntech.de> Cc: linux-gpio@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-27pinctrl: nomadik: make core support explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: drivers/pinctrl/nomadik/Kconfig:config PINCTRL_NOMADIK drivers/pinctrl/nomadik/Kconfig: bool "Nomadik pin controller driver" ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modular infrastructure use, so that when reading the driver there is no doubt it is builtin-only. We delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alessandro Rubini <rubini@unipv.it> Cc: linux-gpio@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-27pinctrl: nomadik: make abx500 explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: config PINCTRL_ABX500 bool "ST-Ericsson ABx500 family Mixed Signal Circuit gpio functions" ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modular infrastructure use, so that when reading the driver there is no doubt it is builtin-only. Note that MODULE_ALIAS is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alessandro Rubini <rubini@unipv.it> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: linux-gpio@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-27pinctrl: mediatek: make mtk-common explicitly non-modularPaul Gortmaker
The Makefile currently controlling compilation of this code is: drivers/pinctrl/mediatek/pinctrl-mtk-common.o ---> drivers/pinctrl/mediatek/Makefile:obj-y += pinctrl-mtk-common.o ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modular infrastructure use, so that when reading the driver there is no doubt it is builtin-only. We delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. We don't replace module.h with init.h since the file doesn't need that. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Hongzhou Yang <hongzhou.yang@mediatek.com> Cc: linux-gpio@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-24pinctrl: meson-gxbb: add pins for PWMNeil Armstrong
Add support for PWM pins, for EE and AO domains. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-23pinctrl: sunxi: fix uart1 CTS/RTS pins at PG on A23/A33Icenowy Zheng
PG8, PG9 is said to be the CTS/RTS pins for UART1 according to the A23/33 datasheets. However, the function is wrongly named "uart2" in the pinctrl driver. This patch fixes this by modifying them to be named "uart1". Cc: stable@vger.kernel.org Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-22Merge tag 'sh-pfc-for-v4.9-tag1' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel pinctrl: sh-pfc: Updates for v4.9 - Bias and DU support for R-Car H3, - Basic R-Car V2H support, - Cleanups and fixes.
2016-08-22pinctrl: cherryview: Do not mask all interrupts in probeMika Westerberg
The Cherryview GPIO controller has 8 or 16 wires connected to the I/O-APIC which can be used directly by the platform/BIOS or drivers. One such wire is used as SCI (System Control Interrupt) which ACPI depends on to be able to trigger GPEs (General Purpose Events). The pinctrl driver itself uses another IRQ resource which is wire OR of all the 8 (or 16) wires and follows what BIOS has programmed to the IntSel register of each pin. Currently the driver masks all interrupts at probe time and this prevents these direct interrupts from working as expected. The reason for this is that some early stage prototypes had some pins misconfigured causing lots of spurious interrupts. We fix this by leaving the interrupt mask untouched. This allows SCI and other direct interrupts work properly. What comes to the possible spurious interrupts we switch the default handler to be handle_bad_irq() instead of handle_simple_irq() (which was not correct anyway). Reported-by: Yu C Chen <yu.c.chen@intel.com> Reported-by: Anisse Astier <anisse@astier.eu> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-22pinctrl: amlogic: gxbb: add the IR remote input pinMartin Blumenstingl
This adds the IR remote receiver to the AO domain devices. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-22pinctrl: pistachio: fix mfio pll_lock pinmuxJames Hartley
A previous patch attempted to fix the pinmuxes for mfio 84 - 89, but it omitted a change to pistachio_pin_group pistachio_groups, which results in incorrect pll_lock signals being routed. Apply the correct mux settings throughout the driver. fixes: cefc03e5995e ("pinctrl: Add Pistachio SoC pin control driver") fixes: e9adb336d0bf ("pinctrl: pistachio: fix mfio84-89 function description and pinmux.") Cc: <stable@vger.kernel.org> # 4.4.x- Signed-off-by: James Hartley <james.hartley@imgtec.com> Reviewed-by: Sifan Naeem <Sifan.Naeem@imgtec.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-22pinctrl: palmas: fix a possible NULL dereferenceLABBE Corentin
of_match_device could return NULL, and so cause a NULL pointer dereference later at line 1009: pinctrl_data = match->data; For fixing this problem, we use of_device_get_match_data(), this will simplify the code a little by using a standard function for getting the match data. Reported-by: coverity (CID 1324136) Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-22pinctrl: exynos: remove duplicate calls in irq handlerperr perr
Because chained_irq_enter() has already called chip->irq_mask() and chip->irq_ack(), also chained_irq_exit() will call chip->irq_unmask(), so it's not necessary to call chip->irq_*() here. Signed-off-by: Perr Zhang <strongbox8@zoho.com> Acked-by: Tomasz Figa <tomasz.figa@gmail.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> [Hand-edited from whitespace damaged patch] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-22pinctrl: meson: get rid of unneeded domain structuresBeniamino Galvani
The driver originally supported more domains (register ranges) per pinctrl device, but since commit 9dab1868ec0d ("pinctrl: amlogic: Make driver independent from two-domain configuration") each device gets assigned a single domain and we instantiate multiple pinctrl devices in the DT. Therefore, now the 'meson_domain' and 'meson_domain_data' structures don't have any reason to exist and can be removed to make the model simpler to understand. This commit doesn't change behavior. Tested on a Odroid-C2. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-19pinctrl: sh-pfc: r8a7796: Add SDHI pins, groups and functionsTakeshi Kihara
This patch adds SDHI pins, groups and functions to R8A7796 SoC. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-08-19pinctrl: sh-pfc: r8a7796: Add SCIF pins, groups and functionsTakeshi Kihara
This patch adds SCIF{0,1,2,3,4,5} pins, groups and functions to R8A7796 SoC. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-08-19pinctrl: sh-pfc: Initial R8A7796 PFC supportTakeshi Kihara
This patch adds initial pinctrl driver to support for the R8A7796 SoC. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [uli: rebased on top of renesas-drivers] Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-08-16pinctrl: sh-pfc: r8a7795: Add DU supportLaurent Pinchart
Only the DU parallel RGB output signals are included, HDMI and TCON pins will be added in separate groups. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-08-11pinctrl: st: Use second parameter to gpio specifierPatrice Chotard
This patch allows to use the second parameter of gpio specifier, which is used to specify whether the gpio is active high or low. Simply remove specific of_xlate callback() and of_gpio_n_cells and use default one set by of_gpiochip_add() which allows to use second parameter gpio specifier. Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-11pinctrl: nomadik: use of_property_read_boolJulia Lawall
Use of_property_read_bool to check for the existence of a property. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e1,e2,x; @@ - if (of_get_property(e1,e2,NULL)) - x = true; - else - x = false; + x = of_property_read_bool(e1,e2); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-11pinctrl: qcom: Add generic ssbi and spmi GPIO/MPP bindingsStephen Boyd
The drivers don't really need to know which PMIC they're for, so make a generic binding for them. This alleviates us from updating the drivers every time a new PMIC comes out. It's still recommended that we update the binding with new PMIC models and always specify the specific model for the MPPs and gpios before the generic compatible string in devicetree, but this at least cuts down on adding more and more compatible strings to the drivers until we actually need them. Cc: <devicetree@vger.kernel.org> Acked-by: "Ivan T. Ivanov" <iivanov.xz@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-11pinctrl: sun6i: add SPDIF to pin description.Marcus Cooper
Add the SPDIF mux functionality to the pinctrl for the Allwinner A31 SoC. Signed-off-by: Marcus Cooper <codekipper@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-10pinctrl: intel: merrifield: Add missed headerAndy Shevchenko
On x86 builds the absense of <linux/io.h> makes static analyzer and compiler unhappy which fails to build the driver. CHECK drivers/pinctrl/intel/pinctrl-merrifield.c drivers/pinctrl/intel/pinctrl-merrifield.c:518:17: error: undefined identifier 'readl' drivers/pinctrl/intel/pinctrl-merrifield.c:570:17: error: undefined identifier 'readl' drivers/pinctrl/intel/pinctrl-merrifield.c:575:9: error: undefined identifier 'writel' drivers/pinctrl/intel/pinctrl-merrifield.c:645:17: error: undefined identifier 'readl' CC drivers/pinctrl/intel/pinctrl-merrifield.o drivers/pinctrl/intel/pinctrl-merrifield.c: In function ‘mrfld_pin_dbg_show’: drivers/pinctrl/intel/pinctrl-merrifield.c:518:10: error: implicit declaration of function ‘readl’ [-Werror=implicit-function-declaration] value = readl(bufcfg); ^ drivers/pinctrl/intel/pinctrl-merrifield.c: In function ‘mrfld_update_bufcfg’: drivers/pinctrl/intel/pinctrl-merrifield.c:575:2: error: implicit declaration of function ‘writel’ [-Werror=implicit-function-declaration] writel(value, bufcfg); ^ cc1: some warnings being treated as errors Add header to the top of the module. Fixes: 4e80c8f50574 ("pinctrl: intel: Add Intel Merrifield pin controller support") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-10pinctrl/amd: Remove the default de-bounce timeAgrawal, Nitesh-kumar
In the function amd_gpio_irq_enable() and amd_gpio_direction_input(), remove the code which is setting the default de-bounce time to 2.75ms. The driver code shall use the same settings as specified in BIOS. Any default assignment impacts TouchPad behaviour when the LevelTrig is set to EDGE FALLING. Cc: stable@vger.kernel.org Reviewed-by:  Ken Xue <Ken.Xue@amd.com> Signed-off-by: Nitesh Kumar Agrawal <Nitesh-kumar.Agrawal@amd.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-10pinctrl: pistachio: Drop pinctrl_unregister for devm_ registered deviceWei Yongjun
It's not necessary to unregister pin controller device registered with devm_pinctrl_register() and using pinctrl_unregister() leads to a double free. This is detected by Coccinelle semantic patch. Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-10pinctrl: meson: Drop pinctrl_unregister for devm_ registered deviceWei Yongjun
It's not necessary to unregister pin controller device registered with devm_pinctrl_register() and using pinctrl_unregister() leads to a double free. This is detected by Coccinelle semantic patch. Fixes: e649f7ec8c5f ("pinctrl: meson: Use devm_pinctrl_register() for pinctrl registration") Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-08pinctrl: sh-pfc: r8a7792: Add DU pin groupsSergei Shtylyov
Add DU pin groups to the R8A7792 PFC driver. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-08-08pinctrl: sh-pfc: r8a7792: Add VIN pin groupsSergei Shtylyov
Add VIN[0-5] pin groups to the R8A7792 PFC driver. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> [geert: Fix VI1_D14_G6_Y6 and VI1_D15_G7_Y7 pins] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-08-08pinctrl: sh-pfc: r8a7795: Correct header from R-Car Gen3 to R8A7795Geert Uytterhoeven
This source file handles r8a7795 only, which is not the sole member of the R-Car Gen3 family. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-08pinctrl: sh-pfc: r8a7792: Add CAN pin groupsSergei Shtylyov
Add CAN0/1 data/clock pin groups to R8A7792 PFC driver. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-08-08pinctrl: sh-pfc: r8a7792: Add SDHI pin groupsSergei Shtylyov
Add SDHI0 pin groups to the R8A7792 PFC driver. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-08-08pinctrl: sh-pfc: r8a7792: Add EtherAVB pin groupsSergei Shtylyov
Add the EtherAVB pin groups to the R8A7792 PFC driver. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-08-08pinctrl: sh-pfc: Add R8A7792 PFC supportSergei Shtylyov
Add the PFC support for the R8A7792 SoC including pin groups for some on-chip devices such as SCIF, INTC, and LBSC... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> [geert: s/LSBC/LBSC/] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-08-08pinctrl: sh-pfc: Fix overly long linesSergei Shtylyov
The PORT_GP_CFG_<n>() macros take up more than 80 columns -- and not for a good reason. Make the header file checkpatch.pl-proof at least in this respect... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-08-08pinctrl: sh-pfc: r8a7795: Add bias pinconf supportUlrich Hecht
Implements pull-up and pull-down. On this SoC there is no simple mapping of GP pins to bias register bits, so we need a table. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-07-28Merge tag 'pinctrl-v4.8-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v4.8 kernel cycle. Nothing stands out as especially exiting: new drivers, new subdrivers, lots of cleanups and incremental features. Business as usual. New drivers: - New driver for Oxnas pin control and GPIO. This ARM-based chipset is used in a few storage (NAS) type devices. - New driver for the MAX77620/MAX20024 pin controller portions. - New driver for the Intel Merrifield pin controller. New subdrivers: - New subdriver for the Qualcomm MDM9615 - New subdriver for the STM32F746 MCU - New subdriver for the Broadcom NSP SoC. Cleanups: - Demodularization of bool compiled-in drivers. Apart from this there is just regular incremental improvements to a lot of drivers, especially Uniphier and PFC" * tag 'pinctrl-v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (131 commits) pinctrl: fix pincontrol definition for marvell pinctrl: xway: fix typo Revert "pinctrl: amd: make it explicitly non-modular" pinctrl: iproc: Add NSP and Stingray GPIO support pinctrl: Update iProc GPIO DT bindings pinctrl: bcm: add OF dependencies pinctrl: ns2: remove redundant dev_err call in ns2_pinmux_probe() pinctrl: Add STM32F746 MCU support pinctrl: intel: Protect set wake flow by spin lock pinctrl: nsp: remove redundant dev_err call in nsp_pinmux_probe() pinctrl: uniphier: add Ethernet pin-mux settings sh-pfc: Use PTR_ERR_OR_ZERO() to simplify the code pinctrl: ns2: fix return value check in ns2_pinmux_probe() pinctrl: qcom: update DT bindings with ebi2 groups pinctrl: qcom: establish proper EBI2 pin groups pinctrl: imx21: Remove the MODULE_DEVICE_TABLE() macro Documentation: dt: Add new compatible to STM32 pinctrl driver bindings includes: dt-bindings: Add STM32F746 pinctrl DT bindings pinctrl: sunxi: fix nand0 function name for sun8i pinctrl: uniphier: remove pointless pin-mux settings for PH1-LD11 ...
2016-07-26Merge tag 'gpio-v4.8-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.8 kernel cycle. The big news is the completion of the chardev ABI which I'm very happy about and apart from that it's an ordinary, quite busy cycle. The details are below. The patches are tested in linux-next for some time, patches to other subsystem mostly have ACKs. I got overly ambitious with configureing lines as input for IRQ lines but it turns out that some controllers have their interrupt-enable and input-enabling in orthogonal settings so the assumption that all IRQ lines are input lines does not hold. Oh well, revert and back to the drawing board with that. Core changes: - The big item is of course the completion of the character device ABI. It has now replaced and surpassed the former unmaintainable sysfs ABI: we can now hammer (bitbang) individual lines or sets of lines and read individual lines or sets of lines from userspace, and we can also register to listen to GPIO events from userspace. As a tie-in we have two new tools in tools/gpio: gpio-hammer and gpio-event-mon that illustrate the proper use of the new ABI. As someone said: the wild west days of GPIO are now over. - Continued to remove the pointless ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB Kconfig symbols. I'm patching hexagon, openrisc, powerpc, sh, unicore, ia64 and microblaze. These are either ACKed by their maintainers or patched anyways after a grace period and no response from maintainers. Some archs (ARM) come in from their trees, and others (x86) are still not fixed, so I might send a second pull request to root it out later in this merge window, or just defer to v4.9. - The GPIO tools are moved to the tools build system. New drivers: - New driver for the MAX77620/MAX20024. - New driver for the Intel Merrifield. - Enabled PCA953x for the TI PCA9536. - Enabled PCA953x for the Intel Edison. - Enabled R8A7792 in the RCAR driver. Driver improvements: - The STMPE and F7188x now supports the .get_direction() callback. - The Xilinx driver supports setting multiple lines at once. - ACPI support for the Vulcan GPIO controller. - The MMIO GPIO driver supports device tree probing. - The Acer One 10 is supported through the _DEP ACPI attribute. Cleanups: - A major cleanup of the OF/DT support code. It is way easier to read and understand now, probably this improves performance too. - Drop a few redundant .owner assignments. - Remove CLPS711x boardfile support: we are 100% DT" * tag 'gpio-v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (67 commits) MAINTAINERS: Add INTEL MERRIFIELD GPIO entry gpio: dwapb: add missing fwnode_handle_put() in dwapb_gpio_get_pdata() gpio: merrifield: Protect irq_ack() and gpio_set() by lock gpio: merrifield: Introduce GPIO driver to support Merrifield gpio: intel-mid: Make it depend to X86_INTEL_MID gpio: intel-mid: Sort header block alphabetically gpio: intel-mid: Remove potentially harmful code gpio: rcar: add R8A7792 support gpiolib: remove duplicated include from gpiolib.c Revert "gpio: convince line to become input in irq helper" gpiolib: of_find_gpio(): Don't discard errors gpio: of: Allow overriding the device node gpio: free handles in fringe cases gpio: tps65218: Add platform_device_id table gpio: max77620: get gpio value based on direction gpio: lynxpoint: avoid potential warning on error path tools/gpio: add install section tools/gpio: move to tools buildsystem gpio: intel-mid: switch to devm_gpiochip_add_data() gpio: 74x164: Use spi_write() helper instead of open coding ...
2016-07-24pinctrl: fix pincontrol definition for marvellAndreas Klinger
On Marvell mv88f6180 with pin control driver one can not use multi purpose pins 35 through 44. I'm using this controller on an embedded board and i found that the pin multiplexing is not the same as in the hardware spezification. This patch alters the pin description so that mpp pins 0 to 19 as well as 35 to 44 are usable. Pin settings i used can be found here: http://www.marvell.com/embedded-processors/kirkwood/assets/HW_88F6180_OpenSource.pdf Signed-off-by: Andreas Klinger <ak@it-klinger.de> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 20:48:24 +0000