summaryrefslogtreecommitdiff
path: root/drivers/pinctrl/sirf
AgeCommit message (Collapse)Author
2014-02-10pinctrl: sirf: add pin group for USP0 for atlas6Rongjun Ying
USP0 has multiple functions, and has RX and TX frame sync signals, for some scenarios like audio PCM, we don't need both of them. so here we add two possibilities for USP0 only holding one of TX and RX frame sync. commit 8385af02bad only added this group for prima2, and missed atlas6. This patch fixes it. Signed-off-by: Rongjun Ying <rongjun.ying@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-03pinctrl: sirf: correct the pin index of ac97_pins groupQipan Li
according to datasheet and ac97_muxmask assignment, ac97_pins should be corrected. Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-15pinctrl: sirf: lock IRQs when starting themLinus Walleij
This uses the new API for tagging GPIO lines as in use by IRQs. This enforces a few semantic checks on how the underlying GPIO line is used. Also assign the gpio_chip.dev pointer to be used for error messages. Cc: Barry Song <Baohua.Song@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-15pinctrl: sirf: put gpio interrupt pin into input status automaticallyBarry Song
busses like i2c, spi and so on can parse the virq of their subnode automatically by irq_of_parse_and_map(). for example, i2c will do that in of_i2c_register_devices(). people can put hwirq number attached to a gpio controller in dts, and drivers can directly request the parsed virq. for example, for an i2c client as below, tangoc-ts@5c{ compatible = "pixcir,tangoc-ts"; interrupt-parent = <&gpio>; interrupts = <3 0>; reg = <0x5c>; }; in i2c client probe(), it will request_irq(client->irq, ...) without calling gpio_direction_input(). so here when we set irq type, we also put the pin to input direction. Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-15pinctrl: sirf: use only one irq_domain for the whole device nodeBarry Song
in sirfsoc gpio probe(), we create 5 irq_domains for 5 gpio banks. but in irq_create_of_mapping() of irqchip core level, irq_find_host() can only return the 1st irq_domain attached the pinctrl dt device node as we can see from the codes: unsigned int irq_create_of_mapping(struct device_node *controller, const u32 *intspec, unsigned int intsize) { struct irq_domain *domain; ... domain = controller ? irq_find_host(controller) : irq_default_domain; } struct irq_domain *irq_find_host(struct device_node *node) { struct irq_domain *h, *found = NULL; int rc; /* We might want to match the legacy controller last since * it might potentially be set to match all interrupts in * the absence of a device node. This isn't a problem so far * yet though... */ mutex_lock(&irq_domain_mutex); list_for_each_entry(h, &irq_domain_list, link) { if (h->ops->match) rc = h->ops->match(h, node); else rc = (h->of_node != NULL) && (h->of_node == node); if (rc) { found = h; break; } } mutex_unlock(&irq_domain_mutex); return found; } for sirfsoc, the 1st irq_domain attached to the device_node(controller) only can do linear for the 1st 32 gpios. so for devices who use gpio hwirq above 32 and put the information in dt like: tangoc-ts@5c{ compatible = "pixcir,tangoc-ts"; + interrupt-parent = <&gpio>; + interrupts = <34 0>; }; we will fail to get the virq for these devices as hwirq will be bigger than domain->revmap_data.linear.size in: unsigned int irq_linear_revmap(struct irq_domain *domain, irq_hw_number_t hwirq) { /* Check revmap bounds; complain if exceeded */ if (WARN_ON(hwirq >= domain->revmap_data.linear.size)) return 0; return domain->revmap_data.linear.revmap[hwirq]; } this patch drops redundant irq_domain and keep only one to fix the problem. Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-08pinctrl: sirf: add pin group for USP0 with only RX or TX frame syncRongjun Ying
USP0 has multiple functions, and has RX and TX frame sync signals, for some scenarios like audio PCM, we don't need both of them. so here we add two possibilities for USP0 only holding one of TX and RX frame sync. Signed-off-by: Rongjun Ying <Rongjun.Ying@csr.com> Signed-off-by: Barry Song <Barry.Song@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-08pinctrl: sirf: fix the pins of sdmmc5 connected with TriGBin Shi
sdmmc5 has only 3 pins CMD, CLK, DATA which are connected with CSR TriG RF multi-GNSS. The hardware connection is like: DATA -- GPS_SGN CLK -- GPS_RF_CLK CMD -- GPS_MAG here we drop redundant pins in sdmmc5 group. Signed-off-by: Bin Shi <Bin.Shi@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-08pinctrl: sirf: add lost usp1_uart_nostreamctrl group for atlas6Qipan Li
commit af614b2301f0e304 adds lost USP-based UART pin groups for prima2, but missed usp1_uart_nostreamctrl group for atlas6, this patch fixes it. this makes USP(Universal Serial Ports) port1 can work as uart without stream ctrl. Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-08pinctrl: sirf: add USB1/UART1 pinmux usb/uart shareRong Wang
dn and dp of USB1 can share with UART1(UART1 can route rx,tx to dn and dp pins of USB1). here we add this pinmux capability. USB1/UART1 mode selection has dedicated control register in RSC module, here we attach the register offset of private data of related pin groups. Signed-off-by: Rong Wang <Rong.Wang@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-08pinctrl: sirf: add lost USP-based UART pin groups for prima2Qipan Li
USP(Universal Serial Ports) can be UART as commit 5df831117b85a08e7aa, this patch defines the USP-based UART function pin groups for prima2. Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-08pinctrl: sirf: add lost uart0-no-stream-control pingroup for prima2Qipan Li
the old codes defined uart0_nostreamctrl_pins, but missed pingroup and padmux definition for it. this patch fixes it. Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-29Merge tag 'v3.11-rc7' into develLinus Walleij
Merged in this to avoid conflicts with the big locking fixes from upstream. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Conflicts: drivers/pinctrl/pinctrl-sunxi.c
2013-08-23pinctrl: sirf: add lost atlas6 uart0-no-stream-control pingroupQipan Li
the old codes defined uart0_nostreamctrl_pins, but missed pingroup and padmux definition for it. this patch fixes it. Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-07pinctrl: sirf: add missing __iomem annotationJingoo Han
Added missing __iomem annotation in order to fix the following sparse warnings: drivers/pinctrl/sirf/pinctrl-sirf.c:846:14: warning: incorrect type in assignment (different address spaces) drivers/pinctrl/sirf/pinctrl-sirf.c:846:14: expected void *regs drivers/pinctrl/sirf/pinctrl-sirf.c:846:14: got void [noderef] <asn:2>* drivers/pinctrl/sirf/pinctrl-sirf.c:869:33: warning: incorrect type in assignment (different address spaces) drivers/pinctrl/sirf/pinctrl-sirf.c:869:33: expected void [noderef] <asn:2>*regs drivers/pinctrl/sirf/pinctrl-sirf.c:869:33: got void *regs drivers/pinctrl/sirf/pinctrl-sirf.c:909:17: warning: incorrect type in argument 1 (different address spaces) drivers/pinctrl/sirf/pinctrl-sirf.c:909:17: expected void volatile [noderef] <asn:2>*addr drivers/pinctrl/sirf/pinctrl-sirf.c:909:17: got void *regs Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-23pinctrl: sirf: add freeze and restore entries for hibernation supportBarry Song
this patch adds hibernation entries so that the sirf platform can support suspend-to-disk. Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-23pinctrl: sirf: fix the checkpatch issue about indentationRongjun Ying
Signed-off-by: Rongjun Ying <Rongjun.Ying@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-22pinctrl: sirf: add usp0_uart_nostreamctrl pin group for usp-uart without ↵Qipan Li
flowctrl this patch adds the lost pin group which supports to let USP0 to simulate a UART without hardware flow control. Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-22pinctrl: sirf: fix the pin number and mux bit for usp0Qipan Li
we missed a pin and related mux bit for usp pin group, this patch fixes it. Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16pinctrl: sirf: save the status in suspend and restore after resumingBarry Song
this patch saves the status of pinctrl registers and restore them while resuming. this makes all drivers have coherent status for pinmux after suspending and resuming. Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16pinctrl:sirf:re-arch and add support for new SiRFatlas6 SoCBarry Song
atlas6 is a SoC very similar with primaII, the register layput of pinctrl is same, but the pads, groups and functions of atlas6 have different layout with prima2, this patch 1. pull the definition of pads, groups and functions out of the pinctrl-sirf driver,and put them into soc-specific files 2. add pads, groups and functions tables for atlas6 3. let pads, groups and functions tables become the config data of the related dt compatible node, so the pinctrl-sirf can support all SiRF SoCs with the config data as private data. In this patch,we create a sirf dir, and let the old drivers/pinctrl/pinctrl-sirf.c = drivers/pinctrl/sirf/pinctrl-prima2.c + drivers/pinctrl/sirf/pinctrl-sirf.c drivers/pinctrl/sirf/pinctrl-atlas6.c is a newly created file for the pin layout of atlas6. Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 11:50:36 +0000