summaryrefslogtreecommitdiff
path: root/drivers/pinctrl/pinctrl-sx150x.c
AgeCommit message (Collapse)Author
2020-09-12pinctrl: sx150x: Fix pinctrl enablement order bugMartin DEVERA
I encountered bug in SX1502 expander driver in 5.7.7. Here is relevant DTS part: compatible = "semtech,sx1502q"; gpio4_cfg_pins: gpio2-cfg {                         pins = "gpio5";                         output-high;     }; And part of OOPS: [    0.673996] [<c023cfa6>] (gpiochip_get_data) from [<c023b235>] (sx150x_gpio_direction_output+0xd) [    0.683259] [<c023b235>] (sx150x_gpio_direction_output) from [<c023b363>] (sx150x_pinconf_set+0x) [    0.692796] [<c023b363>] (sx150x_pinconf_set) from [<c0238fef>] (pinconf_apply_setting+0x39/0x7e) [    0.701635] [<c0238fef>] (pinconf_apply_setting) from [<c0236c77>] (pinctrl_commit_state+0xa5/0x) [    0.710648] [<c0236c77>] (pinctrl_commit_state) from [<c0237e03>] (pinctrl_enable+0xff/0x1d4) [    0.719139] [<c0237e03>] (pinctrl_enable) from [<c023b791>] (sx150x_probe+0x1a3/0x358) [    0.727027] [<c023b791>] (sx150x_probe) from [<c02c38bf>] (i2c_device_probe+0x1bb/0x1dc) The problem is that sx150x_pinconf_set uses sx150x_gpio_direction_output but gpio is not setup yet. Patch below fixes it but I'm not sure whether is it correct. Link: https://lore.kernel.org/r/f32130bf-cfd4-b1bf-538c-dbc9ee2d947a@eaxlabs.cz Signed-off-by: Martin DEVERA <devik@eaxlabs.cz> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-23pinctrl: sx150x: Use irqchip templateLinus Walleij
This makes the driver use the irqchip template to assign properties to the gpio_irq_chip instead of using the explicit calls to gpiochip_irqchip_add_nested() and gpiochip_set_nested_irqchip(). The irqchip is instead added while adding the gpiochip. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Cc: Peter Rosin <peda@axentia.se> Cc: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20200721132537.362160-1-linus.walleij@linaro.org
2020-04-28pinctrl: fix several typosDejin Zheng
use codespell to fix lots of typos over frontends. Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> CC: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20200421142402.9524-1-zhengdejin5@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-02-21pinctrl: Use new GPIO_LINE_DIRECTIONMatti Vaittinen
Use newly added GPIO defines GPIO_LINE_DIRECTION_IN and GPIO_LINE_DIRECTION_OUT instead of using hard-coded 1 and 0. Main benefit is to make it easier to see which values mean IN and which OUT. As a side effect this helps GPIO framework to change the direction defines to something else if ever needed. Please note that return value from get_direction call on pinctrl-axp209 driver was changed. Previously pinctrl-axp209 might have returned value 2 for direction INPUT. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reported-by: kbuild test robot <lkp@intel.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Link: https://lore.kernel.org/r/20200214135712.GA14557@localhost.localdomain Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 and only version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 294 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.825281744@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-07pinctrl: sx150x: handle failure case of devm_kstrdupNicholas Mc Guire
devm_kstrdup() may return NULL if internal allocation failed. Thus using label, name is unsafe without checking. Therefor in the unlikely case of allocation failure, sx150x_probe() simply returns -ENOMEM. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Fixes: 9e80f9064e73 ("pinctrl: Add SX150X GPIO Extender Pinctrl Driver") Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-18pinctrl: sx150x: Add a static gpio/pinctrl pin range mappingPeter Rosin
Without such a range, gpiolib fails with -EPROBE_DEFER, pending the addition of the range. So, without a range, gpiolib will keep deferring indefinitely. Cc: stable@vger.kernel.org Fixes: 9e80f9064e73 ("pinctrl: Add SX150X GPIO Extender Pinctrl Driver") Fixes: e10f72bf4b3e ("gpio: gpiolib: Generalise state persistence beyond sleep") Suggested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-18pinctrl: sx150x: Register pinctrl before adding the gpiochipPeter Rosin
Various gpiolib activity depend on the pinctrl to be up and kicking. Therefore, register the pinctrl before adding a gpiochip. Cc: stable@vger.kernel.org Suggested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-18pinctrl: sx150x: Unregister the pinctrl on releasePeter Rosin
There is no matching call to pinctrl_unregister, so switch to the managed devm_pinctrl_register to clean up properly when done. Cc: stable@vger.kernel.org Fixes: 9e80f9064e73 ("pinctrl: Add SX150X GPIO Extender Pinctrl Driver") Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-09Merge branch 'gpio-irqchip-rework' of /home/linus/linux-gpio into develLinus Walleij
2017-11-08gpio: Move irqdomain into struct gpio_irq_chipThierry Reding
In order to consolidate the multiple ways to associate an IRQ chip with a GPIO chip, move more fields into the new struct gpio_irq_chip. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-09pinctrl: sx150x: make struct sx150x_regmap_config staticColin Ian King
The structure sx150x_regmap_config is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: symbol 'sx150x_regmap_config' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-26pinctrl / gpio: Introduce .set_config() callback for GPIO chipsMika Westerberg
Currently we already have two pin configuration related callbacks available for GPIO chips .set_single_ended() and .set_debounce(). In future we expect to have even more, which does not scale well if we need to add yet another callback to the GPIO chip structure for each possible configuration parameter. Better solution is to reuse what we already have available in the generic pinconf. To support this, we introduce a new .set_config() callback for GPIO chips. The callback takes a single packed pin configuration value as parameter. This can then be extended easily beyond what is currently supported by just adding new types to the generic pinconf enum. If the GPIO driver is backed up by a pinctrl driver the GPIO driver can just assign gpiochip_generic_config() (introduced in this patch) to .set_config and that will take care configuration requests are directed to the pinctrl driver. We then convert the existing drivers over .set_config() and finally remove the .set_single_ended() and .set_debounce() callbacks. Suggested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-12-07pinctrl: sx150x: use new nested IRQ infrastructureLinus Walleij
Use the new gpiochip_irqchip_add_nested() and gpiochip_set_nested_irqchip() calls to properly created a nested irqchip and mark all child irqs properly with their parent IRQ. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-12-07pinctrl: sx150x: handle missing 'advanced' reg in sx1504 and sx1505Peter Rosin
This fixes a problem where sx150x_regmap_reg_width() returns 8 for the data register (reg 0) for sx1504 where it should return 4, and return a correct 8 for sx1505 but for the wrong reason (both chips lack the 'advanced' register). This is not a real problem, since nothing depends on the function returning 4 or 8, and certainly not if it is returning 8 for the wrong reason. But fix this to avoid nasty surprises down the line. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-12-07pinctrl: sx150x: rename 'reg_advance' to 'reg_advanced'Peter Rosin
This matches the datasheets and is less confusing since the register has nothing to with advancing anything. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-12-07pinctrl: sx150x: access the correct bits in the 4-bit regs of sx150[147]Peter Rosin
The code assumes 8-bit or 16-bit width registers, but three of the chips (sx1501/sx1504/sx1507) are 4-bit. So, try to handle 4-bit chips as well, they leave the high part of each register unused. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-25pinctrl: sx150x: add support for sx1501, sx1504, sx1505 and sx1507Peter Rosin
Untested, register offsets carefully copied from datasheets. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-25pinctrl: sx150x: sort chips by part numberPeter Rosin
Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-25pinctrl: sx150x: use correct registers for reg_sense (sx1502 and sx1508)Peter Rosin
All other registers on these chips are 8-bit, but reg_sense is 16-bits and therefore needs to be moved down one notch. This was apparently overlooked in the conversion to regmap, which only updated the register locations for the 16-bit chips. Fixes: 6489677f86c3 ("pinctrl-sx150x: Replace sx150x_*_cfg by means of regmap API") Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-24pinctrl: sx150x: support setting multiple pins at oncePeter Rosin
If the chip does not have an oscio pin, all pins are configured in the same regmap register making it trivial to update all pins at once, so do that. If an oscio pin is present, there needs to be more locking in place to handle all cases correctly, so this is skipped. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-23pinctrl: sx150x: various spelling fixes and some white-space cleanupPeter Rosin
Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-08pinctrl: sx150x: fix up headersLinus Walleij
Include <linux/gpio/driver.h> rather than <linux/gpio.h> Drop <linux/pinctrl/machine.h>. Cc: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-08pinctrl-sx150x: Remove magic numbers from sx150x_resetAndrey Smirnov
Tested-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-08pinctrl-sx150x: Remove magic numbers from sx150x_irq_set_typeAndrey Smirnov
Tested-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-08pinctrl-sx150x: Use handle_bad_irq instead of handle_edge_irqAndrey Smirnov
Althought the function passed as a "handler" during GPIO chip instantiation is not going to ever be called, specifying handle_edge_irq there makes for a rather confusing read, both because no "ack" callback in specified for irqchip and because there's no acking action is necessary. Specify handle_bad_irq instead a make a note of the situation. This commit should be a no-op behaviour wise. Tested-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-08pinctrl-sx150x: Simplify interrupt handlerAndrey Smirnov
Make use of for_each_set_bit macro and reduce boilerplate code. Tested-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-08pinctrl-sx150x: Improve oscio GPIO functionsAndrey Smirnov
Move actual code that configures oscio pin into a separate function and use it instead of calling sx150x_gpio_set to avoid calling sx150x_pin_is_oscio twice and correctly propagte error code in sx150x_gpio_direction_output. Tested-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-08pinctrl-sx150x: Remove excessive lockingAndrey Smirnov
Gpiochip and irqchip aspects of this driver do not access any shared registers on the chip itself and atomicity of various regmap operations is ensured by that API's implementation, so there doesn't seem to be a reason to hold the lock in as many places as it is held now. Tested-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-08pinctrl-sx150x: Replace sx150x_*_cfg by means of regmap APIAndrey Smirnov
The difference between 8 and 16 pin GPIO expanders can be accomodated by the means of regmap API without resorting to using driver-specific read/write accessors. This change, IMHO, brings the following benefits: - Replaces driver's idiosyncratic way of dealing with mult-register fields with regmap API, which, hopefuly, makes the code a bit easier for a new reader to understand - Removes various multi-read for-loop register read logic from various places in the code and puts it in a signle place - Removes ad-hoc IRQ register caching code in sx150x_irq_bus_sync_unlock, since that functionality is provided by regmap Besided aforementioned benefits this change also implements necessary RegSense byte swap necessary for SX1503 and SX1506 variants of the chip. Tested-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-08pinctrl-sx150x: Convert driver to use regmap APIAndrey Smirnov
To allow for future code simplification Tested-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-08pinctrl-sx150x: Improve sx150x_init_misc for SX1504/5/6Andrey Smirnov
For Sx1504/5/6 only SX1506 has RegAdvanced, so put some code in place to account for that. Tested-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-08pinctrl-sx150x: Move some code out of sx150x_init_hwAndrey Smirnov
Move the code configuring explicit IRQ acking into a standalone function to declutter sx150x_init_hw a bit and make that code somewhat less repetitious. Tested-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-08pinctrl-sx150x: Fix incorrect constant in sx150x_init_hwAndrey Smirnov
According to the datasheet for SX1504/5/6, RegAdvanced's "Autoclear NINT" bit that turns the feature when set and disables it when cleared, so writing 0x04 to the register will have the opposite from desirable effect. Tested-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-08pinctrl-sx150x: Replace magic number in sx150x_init_hwAndrey Smirnov
Tested-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-08pinctrl-sx150x: Add SX1503 specific dataAndrey Smirnov
Tested-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-08pinctrl-sx150x: Improve OF device matching codeAndrey Smirnov
Add proper device specific information to of_device_id table of the driver and add code to match against and fetch said data from it. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-24pinctrl: Add SX150X GPIO Extender Pinctrl DriverNeil Armstrong
Since the I2C sx150x GPIO expander driver uses platform_data to manage the pins configurations, rewrite the driver as a pinctrl driver using pinconf to get/set pin configurations from DT or debugfs. The pinctrl driver is functionnally equivalent as the gpio-only driver and can use DT for pinconf. The platform_data confirmation is dropped. This patchset removed the gpio-only driver and selects the Pinctrl driver config instead. This patchset also migrates the gpio dt-bindings to pinctrl and add the pinctrl optional properties. The driver was tested with a SX1509 device on a BeagleBone black with interrupt support and on an X86_64 machine over an I2C to USB converter. This is a fixed version that builds and runs on non-OF platforms and on arm based OF. The GPIO version is removed and the bindings are also moved to the pinctrl bindings. Changes since v2 - rebased on v4.9-rc1 - removed MODULE_DEVICE_TABLE as in upstream bb411e771b0e ("gpio: sx150x: fix implicit assumption module.h is present") Changes since v1 - Fix Kconfig descriptions on pinctrl and gpio - Fix Kconfig dependency - Remove oscio support for non-789 devices - correct typo in dt bindings - remove probe reset for non-789 devices Changes since RFC - Put #ifdef CONFIG_OF/CONFIG_OF_GPIO to remove OF code for non-of platforms - No more rely on OF_GPIO config - Moved and enhanced bindings to pinctrl bindings - Removed gpio-sx150x.c - Temporary select PINCTRL_SX150X when GPIO_SX150X - Temporary mark GPIO_SX150X as deprecated Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Peter Rosin <peda@axentia.se> Acked-by: Rob Herring <robh@kernel.org> ested-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 14:32:46 +0000